U-Boot 2011.03 (Jun 11 2013 - 06:07:37) T114 Board: NVIDIA Dalmore DRAM: 2 GiB MMC: Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Dalmore # Dalmore #usb reset (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.10 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash' Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################# 2.8 MiB/s done Bytes transferred = 3965768 (3c8348 hex) Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *################################################# 2.5 MiB/s done Bytes transferred = 24048 (5df0 hex) Dalmore #bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 81ff7000, end 81fffdef ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 awake 2,325,593 2,325,593 usb_start 6,329,150 4,003,557 eth_start 6,329,147 -3 tftp start 10,111,337 3,782,190 tftp done 11,341,050 1,229,713 start_kernel [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.11.0-rc5-12024-gd4e4ab8 (pwalmsley@tamien) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Sun Aug 11 18:37:17 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07b4a00, node_mem_map c07fc000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1811000 s7168 r0 d13312 u32768 [ 0.000000] pcpu-alloc: s7168 r0 d13312 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070564K/2096128K available (5383K kernel code, 584K rwdata, 1412K rodata, 479K init, 279K bss, 25564K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ab024 (6797 kB) [ 0.000000] .init : 0xc06ac000 - 0xc0723c00 ( 479 kB) [ 0.000000] .data : 0xc0724000 - 0xc07b6140 ( 585 kB) [ 0.000000] .bss : 0xc07b6140 - 0xc07fbe14 ( 280 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Architected local timer running at 12.00MHz (virt). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 12000kHz, resolution 83ns [ 0.000000] Console: colour dummy device 80x30 [ 11.511238] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 11.511254] pid_max: default: 32768 minimum: 301 [ 11.511405] Mount-cache hash table entries: 512 [ 11.517954] CPU: Testing write buffer coherency: ok [ 11.518184] /cpus/cpu@0 missing clock-frequency property [ 11.518196] /cpus/cpu@1 missing clock-frequency property [ 11.518206] /cpus/cpu@2 missing clock-frequency property [ 11.518215] /cpus/cpu@3 missing clock-frequency property [ 11.518229] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 11.518258] Setting up static identity map for 0xc051c398 - 0xc051c430 [ 11.518435] unable to find compatible sirf rstc node in dtb [ 11.519757] CPU1: Booted secondary processor [ 11.519785] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 11.520463] CPU2: Booted secondary processor [ 11.520488] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 11.521157] CPU3: Booted secondary processor [ 11.521181] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 11.521274] Brought up 4 CPUs [ 11.521300] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 11.521308] CPU: All CPU(s) started in SVC mode. [ 11.521939] devtmpfs: initialized [ 11.527462] pinctrl core: initialized pinctrl subsystem [ 11.527805] regulator-dummy: no parameters [ 11.528161] NET: Registered protocol family 16 [ 11.528381] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 11.528570] unable to find compatible sirf pwrc node in dtb [ 11.538171] Serial: AMBA PL011 UART driver [ 11.543011] bio: create slab at 0 [ 11.544306] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 11.544330] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 11.544692] vdd_ac_bat: 5000 mV [ 11.544879] dvdd_ts: Failed to request enable GPIO61: -517 [ 11.544973] reg-fixed-voltage 1.regulator: Failed to register regulator: -517 [ 11.544994] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 11.545115] lcd_bl_en: Failed to request enable GPIO58: -517 [ 11.545197] reg-fixed-voltage 2.regulator: Failed to register regulator: -517 [ 11.545215] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 11.545334] usb1_vbus: Failed to request enable GPIO108: -517 [ 11.545417] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 11.545436] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 11.545553] usb2_vbus: Failed to request enable GPIO86: -517 [ 11.545633] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 11.545652] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 11.545768] vdd_hdmi_5v0: Failed to request enable GPIO81: -517 [ 11.545848] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 11.545866] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 11.546712] vgaarb: loaded [ 11.547031] SCSI subsystem initialized [ 11.547186] libata version 3.00 loaded. [ 11.547359] usbcore: registered new interface driver usbfs [ 11.547403] usbcore: registered new interface driver hub [ 11.547488] usbcore: registered new device driver usb [ 11.550142] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 11.550398] pps_core: LinuxPPS API ver. 1 registered [ 11.550408] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 11.550430] PTP clock support registered [ 11.550471] EDAC MC: Ver: 3.0.0 [ 11.551356] Switched to clocksource arch_sys_counter [ 11.558842] NET: Registered protocol family 2 [ 11.559329] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 11.559519] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 11.559696] TCP: Hash tables configured (established 8192 bind 8192) [ 11.559754] TCP: reno registered [ 11.559770] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 11.559810] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 11.560037] NET: Registered protocol family 1 [ 11.560302] RPC: Registered named UNIX socket transport module. [ 11.560312] RPC: Registered udp transport module. [ 11.560319] RPC: Registered tcp transport module. [ 11.560327] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.560339] PCI: CLS 0 bytes, default 64 [ 11.562273] bounce pool size: 64 pages [ 11.569734] NFS: Registering the id_resolver key type [ 11.569791] Key type id_resolver registered [ 11.569801] Key type id_legacy registered [ 11.570034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 11.570046] io scheduler noop registered [ 11.570055] io scheduler deadline registered [ 11.570194] io scheduler cfq registered (default) [ 11.578621] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 11.626076] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 11.627205] Serial: IMX driver [ 11.628175] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 12.339470] console [ttyS0] enabled [ 12.343753] serial: Freescale lpuart driver [ 12.348105] [drm] Initialized drm 1.1.0 20060810 [ 12.355051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.361561] ehci-pci: EHCI PCI platform driver [ 12.366012] ehci-platform: EHCI generic platform driver [ 12.371309] ehci-omap: OMAP-EHCI Host Controller driver [ 12.376577] ehci-orion: EHCI orion driver [ 12.380656] SPEAr-ehci: EHCI SPEAr driver [ 12.384717] tegra-ehci: Tegra EHCI driver [ 12.389057] usbcore: registered new interface driver usb-storage [ 12.396178] mousedev: PS/2 mouse device common for all mice [ 12.402352] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 12.409485] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 12.416196] sdhci: Secure Digital Host Controller Interface driver [ 12.422351] sdhci: Copyright(c) Pierre Ossman [ 12.426982] sdhci-pltfm: SDHCI platform and OF driver helper [ 12.432937] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 12.439355] mmc0: no vqmmc regulator found [ 12.443430] mmc0: no vmmc regulator found [ 12.447415] mmc0: Invalid maximum block size, assuming 512 bytes [ 12.497571] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 12.505035] mmc1: no vqmmc regulator found [ 12.509130] mmc1: no vmmc regulator found [ 12.513117] mmc1: Invalid maximum block size, assuming 512 bytes [ 12.557328] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 12.565080] usbcore: registered new interface driver usbhid [ 12.570634] usbhid: USB HID core driver [ 12.574676] TCP: cubic registered [ 12.578460] NET: Registered protocol family 10 [ 12.583487] sit: IPv6 over IPv4 tunneling driver [ 12.588678] Key type dns_resolver registered [ 12.593037] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 12.600701] Registering SWP/SWPB emulation handler [ 12.606395] dvdd_ts: 1800 mV [ 12.609671] lcd_bl_en: 5000 mV [ 12.613040] usb1_vbus: 5000 mV [ 12.616203] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 12.622632] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 12.629749] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.637715] usb2_vbus: 5000 mV [ 12.640864] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 12.647282] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 12.654386] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.662280] vdd_hdmi_5v0: 5000 mV [ 12.665688] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 12.672099] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 12.679164] mmc1: BKOPS_EN bit is not set [ 12.683197] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.690949] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 12.700136] Waiting for root device /dev/mmcblk0p1... [ 12.705670] mmc1: new HS200 MMC card at address 0001 [ 12.710996] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 12.715650] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 12.721694] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 12.727734] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 12.735723] Primary GPT is invalid, using alternate GPT. [ 12.741042] mmcblk0: p1 p2 p3 p4 p5 [ 12.747096] mmcblk0boot1: unknown partition table [ 12.753272] mmcblk0boot0: unknown partition table [ 12.758501] usb1_vbus: 5000 mV [ 12.761659] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 12.768077] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 12.775181] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.783116] usb2_vbus: 5000 mV [ 12.786265] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 12.792674] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 12.799788] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.807685] vdd_hdmi_5v0: 5000 mV [ 12.811093] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 12.817500] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 12.824602] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.919616] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 12.959266] EXT4-fs (mmcblk0p1): recovery complete [ 12.964045] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.972140] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 12.980183] devtmpfs: mounted [ 12.983561] Freeing unused kernel memory: 476K (c06ac000 - c0723000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell I have no name!@(none):/#