U-Boot 2011.03 (Jun 11 2013 - 06:07:37) T114 Board: NVIDIA Dalmore DRAM: 2 GiB MMC: Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Dalmore # Dalmore #usb reset (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.10 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash' Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################# 2.8 MiB/s done Bytes transferred = 3964928 (3c8000 hex) Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *################################################# 2.5 MiB/s done Bytes transferred = 24048 (5df0 hex) Dalmore #bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 81ff7000, end 81fffdef ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 awake 3,102,987 3,102,987 usb_start 7,106,482 4,003,495 eth_start 7,106,479 -3 tftp start 10,885,356 3,778,877 tftp done 12,118,935 1,233,579 start_kernel [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.11.0-rc4-11803-gc095ba7 (pwalmsley@tamien) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Tue Aug 6 09:27:13 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07b4a00, node_mem_map c07fc000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1811000 s7168 r0 d13312 u32768 [ 0.000000] pcpu-alloc: s7168 r0 d13312 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070564K/2096128K available (5383K kernel code, 584K rwdata, 1412K rodata, 479K init, 279K bss, 25564K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ab024 (6797 kB) [ 0.000000] .init : 0xc06ac000 - 0xc0723c00 ( 479 kB) [ 0.000000] .data : 0xc0724000 - 0xc07b6140 ( 585 kB) [ 0.000000] .bss : 0xc07b6140 - 0xc07fbe14 ( 280 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Architected local timer running at 12.00MHz (virt). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 12000kHz, resolution 83ns [ 0.000000] Console: colour dummy device 80x30 [ 12.282971] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 12.282988] pid_max: default: 32768 minimum: 301 [ 12.283139] Mount-cache hash table entries: 512 [ 12.289642] CPU: Testing write buffer coherency: ok [ 12.289869] /cpus/cpu@0 missing clock-frequency property [ 12.289882] /cpus/cpu@1 missing clock-frequency property [ 12.289891] /cpus/cpu@2 missing clock-frequency property [ 12.289900] /cpus/cpu@3 missing clock-frequency property [ 12.289915] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 12.289945] Setting up static identity map for 0xc051c128 - 0xc051c1c0 [ 12.290123] unable to find compatible sirf rstc node in dtb [ 12.291448] CPU1: Booted secondary processor [ 12.291477] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 12.292155] CPU2: Booted secondary processor [ 12.292180] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 12.292840] CPU3: Booted secondary processor [ 12.292864] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 12.292958] Brought up 4 CPUs [ 12.292984] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 12.292992] CPU: All CPU(s) started in SVC mode. [ 12.293622] devtmpfs: initialized [ 12.299138] pinctrl core: initialized pinctrl subsystem [ 12.299483] regulator-dummy: no parameters [ 12.299828] NET: Registered protocol family 16 [ 12.300063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 12.300251] unable to find compatible sirf pwrc node in dtb [ 12.309830] Serial: AMBA PL011 UART driver [ 12.314726] bio: create slab at 0 [ 12.316021] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 12.316044] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 12.316409] vdd_ac_bat: 5000 mV [ 12.316594] dvdd_ts: Failed to request enable GPIO61: -517 [ 12.316690] reg-fixed-voltage 1.regulator: Failed to register regulator: -517 [ 12.316712] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.316831] lcd_bl_en: Failed to request enable GPIO58: -517 [ 12.316915] reg-fixed-voltage 2.regulator: Failed to register regulator: -517 [ 12.316934] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.317053] usb1_vbus: Failed to request enable GPIO108: -517 [ 12.317135] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 12.317154] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.317271] usb2_vbus: Failed to request enable GPIO86: -517 [ 12.317352] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 12.317371] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.317487] vdd_hdmi_5v0: Failed to request enable GPIO81: -517 [ 12.317568] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 12.317587] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.318430] vgaarb: loaded [ 12.318752] SCSI subsystem initialized [ 12.318905] libata version 3.00 loaded. [ 12.319073] usbcore: registered new interface driver usbfs [ 12.319115] usbcore: registered new interface driver hub [ 12.319198] usbcore: registered new device driver usb [ 12.321834] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 12.322092] pps_core: LinuxPPS API ver. 1 registered [ 12.322101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.322123] PTP clock support registered [ 12.322164] EDAC MC: Ver: 3.0.0 [ 12.323052] Switched to clocksource arch_sys_counter [ 12.330523] NET: Registered protocol family 2 [ 12.331005] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 12.331197] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 12.331374] TCP: Hash tables configured (established 8192 bind 8192) [ 12.331431] TCP: reno registered [ 12.331446] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 12.331487] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 12.331712] NET: Registered protocol family 1 [ 12.331974] RPC: Registered named UNIX socket transport module. [ 12.331984] RPC: Registered udp transport module. [ 12.331991] RPC: Registered tcp transport module. [ 12.331999] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.332010] PCI: CLS 0 bytes, default 64 [ 12.333942] bounce pool size: 64 pages [ 12.341394] NFS: Registering the id_resolver key type [ 12.341441] Key type id_resolver registered [ 12.341451] Key type id_legacy registered [ 12.341686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 12.341699] io scheduler noop registered [ 12.341708] io scheduler deadline registered [ 12.341849] io scheduler cfq registered (default) [ 12.350283] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 12.397472] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 12.398595] Serial: IMX driver [ 12.399551] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 13.110747] console [ttyS0] enabled [ 13.115028] serial: Freescale lpuart driver [ 13.119380] [drm] Initialized drm 1.1.0 20060810 [ 13.126324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.132832] ehci-pci: EHCI PCI platform driver [ 13.137282] ehci-platform: EHCI generic platform driver [ 13.142584] ehci-omap: OMAP-EHCI Host Controller driver [ 13.147853] ehci-orion: EHCI orion driver [ 13.151931] SPEAr-ehci: EHCI SPEAr driver [ 13.155992] tegra-ehci: Tegra EHCI driver [ 13.160329] usbcore: registered new interface driver usb-storage [ 13.167438] mousedev: PS/2 mouse device common for all mice [ 13.173620] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 13.180753] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 13.187459] sdhci: Secure Digital Host Controller Interface driver [ 13.193614] sdhci: Copyright(c) Pierre Ossman [ 13.198243] sdhci-pltfm: SDHCI platform and OF driver helper [ 13.204191] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 13.210611] mmc0: no vqmmc regulator found [ 13.214685] mmc0: no vmmc regulator found [ 13.218673] mmc0: Invalid maximum block size, assuming 512 bytes [ 13.269263] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 13.276729] mmc1: no vqmmc regulator found [ 13.280819] mmc1: no vmmc regulator found [ 13.284805] mmc1: Invalid maximum block size, assuming 512 bytes [ 13.329026] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 13.336785] usbcore: registered new interface driver usbhid [ 13.342340] usbhid: USB HID core driver [ 13.346378] TCP: cubic registered [ 13.350165] NET: Registered protocol family 10 [ 13.355198] sit: IPv6 over IPv4 tunneling driver [ 13.360383] Key type dns_resolver registered [ 13.364744] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 13.372411] Registering SWP/SWPB emulation handler [ 13.378095] dvdd_ts: 1800 mV [ 13.381369] lcd_bl_en: 5000 mV [ 13.384742] usb1_vbus: 5000 mV [ 13.387907] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 13.394333] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.401451] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.409419] usb2_vbus: 5000 mV [ 13.412570] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 13.418990] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.426094] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.434001] vdd_hdmi_5v0: 5000 mV [ 13.437408] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 13.443821] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.450849] mmc1: BKOPS_EN bit is not set [ 13.454916] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.462668] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 13.471865] Waiting for root device /dev/mmcblk0p1... [ 13.477362] mmc1: new HS200 MMC card at address 0001 [ 13.482684] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 13.487337] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 13.493383] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 13.499425] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 13.507416] Primary GPT is invalid, using alternate GPT. [ 13.512736] mmcblk0: p1 p2 p3 p4 p5 [ 13.518778] mmcblk0boot1: unknown partition table [ 13.524949] mmcblk0boot0: unknown partition table [ 13.530170] usb1_vbus: 5000 mV [ 13.533330] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 13.539750] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.546854] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.554775] usb2_vbus: 5000 mV [ 13.557925] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 13.564335] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.571450] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.579348] vdd_hdmi_5v0: 5000 mV [ 13.582756] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 13.589165] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.596267] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.691300] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 13.729764] EXT4-fs (mmcblk0p1): recovery complete [ 13.734543] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 13.742639] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 13.750507] devtmpfs: mounted [ 13.753886] Freeing unused kernel memory: 476K (c06ac000 - c0723000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell I have no name!@(none):/#