U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 4 MiB/s done Bytes transferred = 6223496 (5ef688 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 4 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5ef688 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.16.0-rc1-next-20180214-30852-gae51fc4 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Feb 14 08:27:40 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2096128K available (9216K kernel code, 786K rwdata, 2584K rodata, 1024K init, 298K bss, 32108K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 787 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007469] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016998] Switching to timer-based delay loop, resolution 1000ns [ 0.024249] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029222] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039969] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047938] Switching to timer-based delay loop, resolution 83ns [ 0.054418] Console: colour dummy device 80x30 [ 0.058354] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068663] pid_max: default: 32768 minimum: 301 [ 0.073740] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079848] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087684] CPU: Testing write buffer coherency: ok [ 0.092013] /cpus/cpu@0 missing clock-frequency property [ 0.097020] /cpus/cpu@1 missing clock-frequency property [ 0.102331] /cpus/cpu@2 missing clock-frequency property [ 0.107594] /cpus/cpu@3 missing clock-frequency property [ 0.112866] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152986] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157740] Hierarchical SRCU implementation. [ 0.173547] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193010] smp: Bringing up secondary CPUs ... [ 0.243645] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323765] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403889] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413463] smp: Brought up 1 node, 4 CPUs [ 0.432566] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438719] CPU: All CPU(s) started in SVC mode. [ 0.445152] devtmpfs: initialized [ 0.465766] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.471028] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.478624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488091] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.494475] pinctrl core: initialized pinctrl subsystem [ 0.500638] NET: Registered protocol family 16 [ 0.505074] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512111] cpuidle: using governor menu [ 0.537220] No ATAGs? [ 0.537356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.545718] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.553495] iommu: Adding device 50000000.host1x to group 0 [ 0.557261] iommu: Adding device 54200000.dc to group 1 [ 0.562408] iommu: Adding device 54240000.dc to group 1 [ 0.567645] iommu: Adding device 57000000.gpu to group 2 [ 0.589780] +5V_SYS: supplied by +VDD_MUX [ 0.592283] +3.3V_SYS: supplied by +VDD_MUX [ 0.596867] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.602149] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.610286] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.616006] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.624259] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.631028] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.639233] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.645038] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.653271] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.658814] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.667050] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.672679] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.682107] vgaarb: loaded [ 0.684268] SCSI subsystem initialized [ 0.687469] libata version 3.00 loaded. [ 0.691356] usbcore: registered new interface driver usbfs [ 0.696583] usbcore: registered new interface driver hub [ 0.701873] usbcore: registered new device driver usb [ 0.710062] Linux video capture interface: v2.00 [ 0.712846] pps_core: LinuxPPS API ver. 1 registered [ 0.717731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.726846] PTP clock support registered [ 0.732159] Advanced Linux Sound Architecture Driver Initialized. [ 0.737436] Bluetooth: Core ver 2.22 [ 0.740381] NET: Registered protocol family 31 [ 0.744776] Bluetooth: HCI device and connection manager initialized [ 0.751081] Bluetooth: HCI socket layer initialized [ 0.755958] Bluetooth: L2CAP socket layer initialized [ 0.760989] Bluetooth: SCO socket layer initialized [ 0.766453] clocksource: Switched to clocksource arch_sys_counter [ 0.865460] NET: Registered protocol family 2 [ 0.868927] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.875597] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.882682] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.889169] TCP: Hash tables configured (established 8192 bind 8192) [ 0.895776] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.901251] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.907860] NET: Registered protocol family 1 [ 0.912614] net_namespace: Pernet operations 0xc0ea2f04 are sync. [ 0.917993] RPC: Registered named UNIX socket transport module. [ 0.923807] RPC: Registered udp transport module. [ 0.928510] RPC: Registered tcp transport module. [ 0.933167] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.940240] PCI: CLS 0 bytes, default 64 [ 0.945307] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.953461] Initialise system trusted keyrings [ 0.956218] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.963870] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.969095] NFS: Registering the id_resolver key type [ 0.973306] Key type id_resolver registered [ 0.977488] Key type id_legacy registered [ 0.986687] Key type asymmetric registered [ 0.988873] Asymmetric key parser 'x509' registered [ 0.993858] bounce: pool size: 64 pages [ 0.997625] io scheduler noop registered (default) [ 1.002307] io scheduler mq-deadline registered [ 1.006830] io scheduler kyber registered [ 1.012624] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.017631] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.024558] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.040588] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.044293] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.054200] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.064860] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.071850] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.077418] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.084962] console [ttyS0] disabled [ 1.086701] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.095599] console [ttyS0] enabled [ 1.095599] console [ttyS0] enabled [ 1.101826] bootconsole [earlycon0] disabled [ 1.101826] bootconsole [earlycon0] disabled [ 1.111193] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.122601] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.151355] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.171174] loop: module loaded [ 1.175797] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.183263] as3722 4-0040: AS3722 with revision 0x1 found [ 1.195464] as3722-sd2: supplied by +5V_SYS [ 1.200152] as3722-sd3: supplied by +5V_SYS [ 1.204578] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.210979] as3722-sd4: supplied by +5V_SYS [ 1.215652] as3722-sd5: supplied by +5V_SYS [ 1.221759] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.227958] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.234185] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.240150] as3722-ldo3: supplied by +3.3V_SYS [ 1.244650] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.252483] as3722-ldo4: supplied by +3.3V_SYS [ 1.257182] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.263411] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.268291] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.275257] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.280935] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.287133] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.298455] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.316924] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.323775] libphy: Fixed MDIO Bus: probed [ 1.327898] CAN device driver interface [ 1.331781] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.338923] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.344631] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.352108] usbcore: registered new interface driver pegasus [ 1.357901] usbcore: registered new interface driver asix [ 1.363346] usbcore: registered new interface driver ax88179_178a [ 1.369515] usbcore: registered new interface driver cdc_ether [ 1.375404] usbcore: registered new interface driver smsc75xx [ 1.381243] usbcore: registered new interface driver smsc95xx [ 1.387057] usbcore: registered new interface driver net1080 [ 1.392760] usbcore: registered new interface driver cdc_subset [ 1.398750] usbcore: registered new interface driver zaurus [ 1.404386] usbcore: registered new interface driver cdc_ncm [ 1.410306] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.415932] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.421654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.428197] ehci-pci: EHCI PCI platform driver [ 1.432692] tegra-ehci: Tegra EHCI driver [ 1.439555] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.444974] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.452794] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.486484] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.493299] hub 1-0:1.0: USB hub found [ 1.497118] hub 1-0:1.0: 1 port detected [ 1.502287] usbcore: registered new interface driver cdc_acm [ 1.507962] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.516011] usbcore: registered new interface driver cdc_wdm [ 1.521772] usbcore: registered new interface driver usb-storage [ 1.536162] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.543056] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.550881] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.558091] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.564605] i2c /dev entries driver [ 1.569385] usbcore: registered new interface driver uvcvideo [ 1.575123] USB Video Class driver (1.1.1) [ 1.579238] gspca_main: v2.14.0 registered [ 1.583966] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.594280] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.603163] sdhci: Secure Digital Host Controller Interface driver [ 1.609485] sdhci: Copyright(c) Pierre Ossman [ 1.613836] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.619856] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.624758] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.646105] mmc0: Unknown controller version (3). You may experience problems. [ 1.653385] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.690517] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.698905] usbcore: registered new interface driver usbhid [ 1.704511] usbhid: USB HID core driver [ 1.748517] mmc0: new high speed MMC card at address 0001 [ 1.759220] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.768919] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.779957] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.786102] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.795260] mmcblk0: p1 [ 2.147896] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.167582] tegra30-i2s 70301100.i2s: ASoC: Failed to create component debugfs directory [ 2.176309] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.187368] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.198560] NET: Registered protocol family 10 [ 2.204383] Segment Routing with IPv6 [ 2.208244] mip6: Mobile IPv6 [ 2.211212] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.218707] NET: Registered protocol family 17 [ 2.223164] NET: Registered protocol family 15 [ 2.227625] can: controller area network core (rev 20170425 abi 9) [ 2.234011] NET: Registered protocol family 29 [ 2.238479] can: raw protocol (rev 20170425) [ 2.242745] can: broadcast manager protocol (rev 20170425 t) [ 2.248463] can: netlink gateway (rev 20170425) max_hops=1 [ 2.254137] Bluetooth: RFCOMM socket layer initialized [ 2.259320] Bluetooth: RFCOMM ver 1.11 [ 2.263075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.268410] Bluetooth: BNEP socket layer initialized [ 2.273368] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.279335] Bluetooth: HIDP socket layer initialized [ 2.284523] Key type dns_resolver registered [ 2.289304] Registering SWP/SWPB emulation handler [ 2.294890] Loading compiled-in X.509 certificates [ 2.319216] +3.3V_RUN: supplied by +3.3V_SYS [ 2.324271] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.329122] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.334984] +5V_USB_HS: supplied by +5V_SYS [ 2.340252] +3.3V_LP0: supplied by +3.3V_SYS [ 2.345534] +5V_HDMI_CON: supplied by +5V_SYS [ 2.350580] +5V_SATA: supplied by +5V_SYS [ 2.355047] +12V_SATA: supplied by +VDD_MUX [ 2.360673] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.367656] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.374675] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.382195] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.387842] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.397284] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.405974] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.414517] as3722-sd2: supplied by +5V_SYS [ 2.419057] as3722-sd3: supplied by +5V_SYS [ 2.423530] as3722-sd4: supplied by +5V_SYS [ 2.428307] as3722-sd5: supplied by +5V_SYS [ 2.433974] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.439875] as3722-ldo1: supplied by +3.3V_RUN [ 2.444629] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.450335] as3722-ldo3: supplied by +3.3V_SYS [ 2.455699] as3722-ldo4: supplied by +3.3V_SYS [ 2.461344] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.469914] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.475096] as3722-ldo6: supplied by +3.3V_RUN [ 2.479995] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.485389] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.492505] as3722-ldo9: supplied by +5V_SYS [ 2.498012] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.504737] as3722-ldo10: supplied by +5V_SYS [ 2.509888] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.516749] as3722-ldo11: supplied by +3.3V_RUN [ 2.522027] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.531305] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.540385] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.550940] scsi host0: tegra-ahci [ 2.555351] scsi host1: tegra-ahci [ 2.559105] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.567123] ata2: DUMMY [ 2.570743] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.576181] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.584067] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.616585] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.623693] hub 2-0:1.0: USB hub found [ 2.627566] hub 2-0:1.0: 1 port detected [ 2.644514] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 [ 2.654324] tegra-xusb 70090000.usb: failed to request firmware: -2 [ 2.660643] tegra-xusb 70090000.usb: failed to load firmware: -2 [ 2.667371] tegra-xusb: probe of 70090000.usb failed with error -2 [ 2.674411] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.679376] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.690732] mmc1: Unknown controller version (3). You may experience problems. [ 2.698072] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.736081] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.743836] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.751387] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.759382] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.784165] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.792524] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.806554] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.812838] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.819141] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.826123] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.833549] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.839143] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.845175] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.854945] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.864758] pci 0000:00:01.0: enabling Extended Tags [ 2.869848] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.879656] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.889561] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.896288] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.900042] ata1: SATA link down (SStatus 0 SControl 300) [ 2.906495] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.917582] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.927378] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.937117] pci 0000:00:02.0: enabling Extended Tags [ 2.942083] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.951896] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.961740] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.968417] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.978478] PCI: bus0: Fast back to back transfers disabled [ 2.984095] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.992176] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.000467] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.006640] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.013703] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.030748] mmc1: new high speed SDHC card at address aaaa [ 3.041575] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.046551] PCI: bus1: Fast back to back transfers disabled [ 3.052134] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.059307] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.065697] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.071497] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.078476] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.086009] pci 0000:02:00.0: supports D1 D2 [ 3.090536] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.101004] mmcblk1: p1 p2 p3 [ 3.126650] PCI: bus2: Fast back to back transfers disabled [ 3.132240] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.138967] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.145752] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.152606] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.160412] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.166537] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.173879] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.178895] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.185698] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.193470] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.200807] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.206919] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.211880] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.217990] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.224773] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.232565] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.239685] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.246087] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.252033] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.259112] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.265473] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.271617] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.277260] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.308300] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x75352222, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.317978] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.330131] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.339375] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.346001] [drm] No driver support for vblank timestamp query. [ 3.486353] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.650573] Console: switching to colour frame buffer device 512x135 [ 3.746542] drm drm: fb0: frame buffer device [ 3.751148] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.758621] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.765948] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.774987] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.782409] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813) [ 3.791249] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.800910] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.807561] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.816154] cfg80211: failed to load regulatory.db [ 3.816988] +USB0_VBUS_SW: disabling [ 3.824514] +1.8V_RUN_CAM: disabling [ 3.828360] +2.8V_RUN_CAM: disabling [ 3.832172] +1.2V_RUN_CAM_FRONT: disabling [ 3.836541] +1.05V_RUN_CAM_REAR: disabling [ 3.840930] +3.3V_RUN_TOUCH: disabling [ 3.844914] +2.8V_RUN_CAM_AF: disabling [ 3.849007] +1.8V_RUN_VPP_FUSE: disabling [ 3.853188] ALSA device list: [ 3.856151] #0: tegra-hda at 0x70038000 irq 346 [ 3.860876] #1: NVIDIA Tegra Jetson TK1 [ 3.865725] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.922770] EXT4-fs (mmcblk0p1): recovery complete [ 3.928632] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.936865] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.947773] devtmpfs: mounted [ 3.951217] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#