U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 3.3 MiB/s done Bytes transferred = 6386160 (6171f0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6171f0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.16.0-rc1-next-20180212-231456-gc7434d8 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 19:17:10 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2848K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017557] Switching to timer-based delay loop, resolution 1000ns [ 0.024100] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029778] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040525] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048496] Switching to timer-based delay loop, resolution 83ns [ 0.054676] Console: colour dummy device 80x30 [ 0.058905] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069215] pid_max: default: 32768 minimum: 301 [ 0.073980] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080396] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087730] CPU: Testing write buffer coherency: ok [ 0.092412] /cpus/cpu@0 missing clock-frequency property [ 0.097559] /cpus/cpu@1 missing clock-frequency property [ 0.102856] /cpus/cpu@2 missing clock-frequency property [ 0.108133] /cpus/cpu@3 missing clock-frequency property [ 0.113416] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153458] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158112] Hierarchical SRCU implementation. [ 0.173682] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193463] smp: Bringing up secondary CPUs ... [ 0.243763] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323790] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403831] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413609] smp: Brought up 1 node, 4 CPUs [ 0.432693] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438846] CPU: All CPU(s) started in SVC mode. [ 0.444137] devtmpfs: initialized [ 0.453628] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458674] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466294] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475918] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482209] pinctrl core: initialized pinctrl subsystem [ 0.487731] NET: Registered protocol family 16 [ 0.492137] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499047] cpuidle: using governor menu [ 0.509959] No ATAGs? [ 0.510018] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518360] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525038] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532727] iommu: Adding device 50000000.host1x to group 0 [ 0.538134] iommu: Adding device 54200000.dc to group 1 [ 0.543335] iommu: Adding device 54240000.dc to group 1 [ 0.548537] iommu: Adding device 57000000.gpu to group 2 [ 0.559628] +5V_SYS: supplied by +VDD_MUX [ 0.561856] +3.3V_SYS: supplied by +VDD_MUX [ 0.566182] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571515] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579618] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585555] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593669] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599421] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607535] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613287] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621460] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628281] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636469] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642320] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650921] vgaarb: loaded [ 0.653420] SCSI subsystem initialized [ 0.656974] libata version 3.00 loaded. [ 0.660820] usbcore: registered new interface driver usbfs [ 0.666178] usbcore: registered new interface driver hub [ 0.671491] usbcore: registered new device driver usb [ 0.677693] Linux video capture interface: v2.00 [ 0.681087] pps_core: LinuxPPS API ver. 1 registered [ 0.686010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695112] PTP clock support registered [ 0.699157] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706372] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712541] Advanced Linux Sound Architecture Driver Initialized. [ 0.718753] Bluetooth: Core ver 2.22 [ 0.722071] NET: Registered protocol family 31 [ 0.726481] Bluetooth: HCI device and connection manager initialized [ 0.732801] Bluetooth: HCI socket layer initialized [ 0.737659] Bluetooth: L2CAP socket layer initialized [ 0.742694] Bluetooth: SCO socket layer initialized [ 0.747787] clocksource: Switched to clocksource arch_sys_counter [ 0.785829] NET: Registered protocol family 2 [ 0.788654] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795917] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802962] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809394] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815828] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821570] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.828005] NET: Registered protocol family 1 [ 0.842520] RPC: Registered named UNIX socket transport module. [ 0.846517] RPC: Registered udp transport module. [ 0.851209] RPC: Registered tcp transport module. [ 0.855877] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.862542] PCI: CLS 0 bytes, default 64 [ 0.866885] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.875032] Initialise system trusted keyrings [ 0.878839] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885650] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891291] NFS: Registering the id_resolver key type [ 0.896010] Key type id_resolver registered [ 0.900176] Key type id_legacy registered [ 0.905816] Key type asymmetric registered [ 0.908235] Asymmetric key parser 'x509' registered [ 0.913127] bounce: pool size: 64 pages [ 0.916913] io scheduler noop registered (default) [ 0.921678] io scheduler mq-deadline registered [ 0.926164] io scheduler kyber registered [ 0.930790] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943285] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949376] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958170] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964949] console [ttyS0] disabled [ 0.967851] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976768] console [ttyS0] enabled [ 0.976768] console [ttyS0] enabled [ 0.983032] bootconsole [earlycon0] disabled [ 0.983032] bootconsole [earlycon0] disabled [ 1.009113] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015584] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.023097] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034495] loop: module loaded [ 1.038222] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048284] as3722-sd2: supplied by +5V_SYS [ 1.052709] as3722-sd3: supplied by +5V_SYS [ 1.057046] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063235] as3722-sd4: supplied by +5V_SYS [ 1.067571] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073327] as3722-sd5: supplied by +5V_SYS [ 1.078934] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084681] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090709] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096340] as3722-ldo3: supplied by +3.3V_SYS [ 1.100800] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108377] as3722-ldo4: supplied by +3.3V_SYS [ 1.112974] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118999] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123776] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130476] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136507] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141289] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147851] as3722-ldo9: supplied by +5V_SYS [ 1.152422] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158637] as3722-ldo10: supplied by +5V_SYS [ 1.163150] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169600] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.191950] cros-ec-spi spi0.0: Chrome EC device registered [ 1.206816] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.212344] libphy: Fixed MDIO Bus: probed [ 1.216430] CAN device driver interface [ 1.220290] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227235] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.232848] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240282] usbcore: registered new interface driver pegasus [ 1.245951] usbcore: registered new interface driver asix [ 1.251370] usbcore: registered new interface driver ax88179_178a [ 1.257465] usbcore: registered new interface driver cdc_ether [ 1.263315] usbcore: registered new interface driver smsc75xx [ 1.269079] usbcore: registered new interface driver smsc95xx [ 1.274829] usbcore: registered new interface driver net1080 [ 1.280500] usbcore: registered new interface driver cdc_subset [ 1.286420] usbcore: registered new interface driver zaurus [ 1.292010] usbcore: registered new interface driver cdc_ncm [ 1.297741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304259] ehci-pci: EHCI PCI platform driver [ 1.308720] tegra-ehci: Tegra EHCI driver [ 1.312981] usbcore: registered new interface driver cdc_acm [ 1.318633] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.326636] usbcore: registered new interface driver cdc_wdm [ 1.332311] usbcore: registered new interface driver usb-storage [ 1.338974] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.358674] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.365532] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.372295] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.379446] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.385722] i2c /dev entries driver [ 1.389641] usbcore: registered new interface driver uvcvideo [ 1.395370] USB Video Class driver (1.1.1) [ 1.399463] gspca_main: v2.14.0 registered [ 1.403777] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.412438] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.420785] sdhci: Secure Digital Host Controller Interface driver [ 1.426949] sdhci: Copyright(c) Pierre Ossman [ 1.431304] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.437076] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.450878] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.455750] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475921] mmc0: Unknown controller version (3). You may experience problems. [ 1.483162] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519938] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527646] usbcore: registered new interface driver usbhid [ 1.533325] usbhid: USB HID core driver [ 1.539435] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587692] mmc0: new high speed MMC card at address 0001 [ 1.593610] max98090 0-0010: MAX98090 REVID=0x43 [ 1.595046] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604385] max98090 0-0010: use default 2.8v micbias [ 1.604615] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.617207] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.623246] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623420] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.638208] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.639991] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.646187] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.660156] NET: Registered protocol family 10 [ 1.665217] Segment Routing with IPv6 [ 1.668945] mip6: Mobile IPv6 [ 1.671904] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678369] NET: Registered protocol family 17 [ 1.682806] NET: Registered protocol family 15 [ 1.687237] can: controller area network core (rev 20170425 abi 9) [ 1.693489] NET: Registered protocol family 29 [ 1.697927] can: raw protocol (rev 20170425) [ 1.702184] can: broadcast manager protocol (rev 20170425 t) [ 1.707838] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713388] Bluetooth: RFCOMM socket layer initialized [ 1.718531] Bluetooth: RFCOMM ver 1.11 [ 1.722273] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727573] Bluetooth: BNEP socket layer initialized [ 1.732528] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738439] Bluetooth: HIDP socket layer initialized [ 1.743482] Key type dns_resolver registered [ 1.747944] Registering SWP/SWPB emulation handler [ 1.752984] Loading compiled-in X.509 certificates [ 1.764838] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769841] +VDD_LED: supplied by +VDD_MUX [ 1.774037] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779712] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.784414] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.789173] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.794410] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.799042] +5V_USB_HS: supplied by +5V_SYS [ 1.803358] +5V_USB_SS: supplied by +5V_SYS [ 1.808621] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.814121] +3.3V_LP0: supplied by +3.3V_SYS [ 1.819124] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.824935] +5V_HDMI_CON: supplied by +5V_SYS [ 1.830033] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.836767] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.849925] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.856137] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928523] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935919] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941357] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950895] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959522] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965896] hub 1-0:1.0: USB hub found [ 1.969723] hub 1-0:1.0: 6 ports detected [ 1.974097] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979498] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.987163] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995653] hub 2-0:1.0: USB hub found [ 1.999467] hub 2-0:1.0: 2 ports detected [ 2.004522] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.018014] mmc1: Unknown controller version (3). You may experience problems. [ 2.025258] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031751] mmc1: Switching to 3.3V signalling voltage failed [ 2.060540] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.068185] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.073056] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083293] mmc2: Unknown controller version (3). You may experience problems. [ 2.090632] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.125509] mmc1: new high speed SDIO card at address 0001 [ 2.131325] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.138934] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145097] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153212] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160018] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166239] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174200] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.183013] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.192924] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.199886] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208116] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.208574] cfg80211: failed to load regulatory.db [ 2.213026] +1.8V_RUN_CAM: disabling [ 2.221633] +1.2V_RUN_CAM_FRONT: disabling [ 2.225960] +1.05V_RUN_CAM_REAR: disabling [ 2.230376] +2.8V_RUN_TOUCH: disabling [ 2.234344] +2.8V_RUN_CAM_AF: disabling [ 2.238487] +1.8V_RUN_VPP_FUSE: disabling [ 2.242714] +VDD_LED: disabling [ 2.245875] +5V_VDD_TS_SW: disabling [ 2.249492] +3.3V_PANEL: disabling [ 2.252895] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.257416] +5V_HDMI_CON: disabling [ 2.260971] ALSA device list: [ 2.263978] #1: GoogleNyanBig [ 2.298340] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.304396] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.304753] panel-simple panel: panel supply power not found, using dummy regulator [ 2.320339] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.337849] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.369519] mmc2: new high speed SDHC card at address 0007 [ 2.376853] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.390368] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.396541] GPT:3014591 != 15564799 [ 2.400057] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.407437] GPT:3014591 != 15564799 [ 2.410918] GPT: Use GNU Parted to correct GPT errors. [ 2.416076] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.423127] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.429367] panel-simple panel: panel supply power not found, using dummy regulator [ 2.660344] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.675022] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.684519] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.690688] panel-simple panel: panel supply power not found, using dummy regulator [ 2.828976] EXT4-fs (mmcblk0p3): recovery complete [ 2.833765] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.841898] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.848919] devtmpfs: mounted [ 2.852328] Freeing unused kernel memory: 1024K [ 2.878100] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.883769] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.889111] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.894434] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.899957] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.905529] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.911034] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.916598] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.922351] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.927740] alloc_contig_range: [fbca3, fbca4) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.077881] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.736812] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.747883] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.754105] panel-simple panel: panel supply power not found, using dummy regulator [ 4.087881] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.276159] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.283164] scsi host0: usb-storage 1-1:1.0 [ 4.287773] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.293967] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.319456] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.328114] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.334334] panel-simple panel: panel supply power not found, using dummy regulator [ 5.525742] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.534725] sd 0:0:0:0: [sda] Write Protect is off [ 5.539547] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.545755] sd 0:0:0:0: [sda] No Caching mode page found [ 5.551097] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.581523] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.595872] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.674930] PM: suspend entry (deep) [ 5.678549] PM: Syncing filesystems ... done. [ 5.684845] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.692996] OOM killer disabled. [ 5.696223] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.704766] Suspending console(s) (use no_console_suspend to debug) [ 5.891527] Disabling non-boot CPUs ... [ 5.927989] IRQ17 no longer affine to CPU1 [ 6.048540] Entering suspend state LP1 [ 6.048565] Enabling non-boot CPUs ... [ 6.049313] CPU1 is up [ 6.049958] CPU2 is up [ 6.050651] CPU3 is up [ 6.091596] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.103724] mmc1: Switching to 3.3V signalling voltage failed [ 6.318349] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.631261] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.631433] panel-simple panel: panel supply power not found, using dummy regulator [ 6.685870] OOM killer enabled. [ 6.689034] Restarting tasks ... done. [ 6.693523] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.747493] PM: suspend entry (deep) [ 7.751085] PM: Syncing filesystems ... done. [ 7.756791] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.764878] OOM killer disabled. [ 7.768111] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.776596] Suspending console(s) (use no_console_suspend to debug) [ 7.961876] Disabling non-boot CPUs ... [ 8.118439] Entering suspend state LP1 [ 8.118464] Enabling non-boot CPUs ... [ 8.119250] CPU1 is up [ 8.119909] CPU2 is up [ 8.120616] CPU3 is up [ 8.171781] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.183758] mmc1: Switching to 3.3V signalling voltage failed [ 8.398258] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.710885] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.711056] panel-simple panel: panel supply power not found, using dummy regulator [ 8.761294] OOM killer enabled. [ 8.764423] Restarting tasks ... done. [ 8.768646] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.817573] PM: suspend entry (deep) [ 9.821163] PM: Syncing filesystems ... done. [ 9.826879] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.835048] OOM killer disabled. [ 9.838285] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.846860] Suspending console(s) (use no_console_suspend to debug) [ 10.031633] Disabling non-boot CPUs ... [ 10.218481] Entering suspend state LP1 [ 10.218506] Enabling non-boot CPUs ... [ 10.219297] CPU1 is up [ 10.219969] CPU2 is up [ 10.220678] CPU3 is up [ 10.271737] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.283663] mmc1: Switching to 3.3V signalling voltage failed [ 10.811056] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.811228] panel-simple panel: panel supply power not found, using dummy regulator [ 10.854663] OOM killer enabled. [ 10.857811] Restarting tasks ... done. [ 10.862032] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.916566] PM: suspend entry (deep) [ 11.920157] PM: Syncing filesystems ... done. [ 11.925695] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.933786] OOM killer disabled. [ 11.937001] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.945574] Suspending console(s) (use no_console_suspend to debug) [ 12.131298] Disabling non-boot CPUs ... [ 12.287865] IRQ17 no longer affine to CPU3 [ 12.288392] Entering suspend state LP1 [ 12.288417] Enabling non-boot CPUs ... [ 12.289207] CPU1 is up [ 12.289875] CPU2 is up [ 12.290581] CPU3 is up [ 12.341732] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.353780] mmc1: Switching to 3.3V signalling voltage failed [ 12.882875] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.883048] panel-simple panel: panel supply power not found, using dummy regulator [ 12.930628] OOM killer enabled. [ 12.933771] Restarting tasks ... done. [ 12.938018] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 13.987477] PM: suspend entry (deep) [ 13.991068] PM: Syncing filesystems ... done. [ 13.996771] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.004859] OOM killer disabled. [ 14.008091] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.016577] Suspending console(s) (use no_console_suspend to debug) [ 14.201606] Disabling non-boot CPUs ... [ 14.378343] Entering suspend state LP1 [ 14.378368] Enabling non-boot CPUs ... [ 14.379160] CPU1 is up [ 14.379818] CPU2 is up [ 14.380533] CPU3 is up [ 14.431719] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.444068] mmc1: Switching to 3.3V signalling voltage failed [ 14.970769] tegra-sor 54540000.sor: failed to probe output: -517 [ 14.970940] panel-simple panel: panel supply power not found, using dummy regulator [ 15.014366] OOM killer enabled. [ 15.017498] Restarting tasks ... done. [ 15.021997] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.077425] PM: suspend entry (deep) [ 16.081015] PM: Syncing filesystems ... done. [ 16.086630] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.094701] OOM killer disabled. [ 16.097932] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.106498] Suspending console(s) (use no_console_suspend to debug) [ 16.291511] Disabling non-boot CPUs ... [ 16.477814] IRQ17 no longer affine to CPU3 [ 16.478412] Entering suspend state LP1 [ 16.478437] Enabling non-boot CPUs ... [ 16.479230] CPU1 is up [ 16.479894] CPU2 is up [ 16.480603] CPU3 is up [ 16.531692] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.543821] mmc1: Switching to 3.3V signalling voltage failed [ 17.072263] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.072435] panel-simple panel: panel supply power not found, using dummy regulator [ 17.119910] OOM killer enabled. [ 17.123039] Restarting tasks ... done. [ 17.127291] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.176239] PM: suspend entry (deep) [ 18.179826] PM: Syncing filesystems ... done. [ 18.185289] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.193375] OOM killer disabled. [ 18.196590] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.205105] Suspending console(s) (use no_console_suspend to debug) [ 18.391164] Disabling non-boot CPUs ... [ 18.568295] Entering suspend state LP1 [ 18.568320] Enabling non-boot CPUs ... [ 18.569113] CPU1 is up [ 18.569768] CPU2 is up [ 18.570478] CPU3 is up [ 18.622062] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.634000] mmc1: Switching to 3.3V signalling voltage failed [ 19.161540] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.161710] panel-simple panel: panel supply power not found, using dummy regulator [ 19.205084] OOM killer enabled. [ 19.208225] Restarting tasks ... done. [ 19.212569] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.267494] PM: suspend entry (deep) [ 20.271094] PM: Syncing filesystems ... done. [ 20.276833] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.285006] OOM killer disabled. [ 20.288244] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.296822] Suspending console(s) (use no_console_suspend to debug) [ 20.481522] Disabling non-boot CPUs ... [ 20.517803] IRQ17 no longer affine to CPU1 [ 20.628269] Entering suspend state LP1 [ 20.628294] Enabling non-boot CPUs ... [ 20.629087] CPU1 is up [ 20.629758] CPU2 is up [ 20.630465] CPU3 is up [ 20.681592] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.693736] mmc1: Switching to 3.3V signalling voltage failed [ 20.908092] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.220944] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.221115] panel-simple panel: panel supply power not found, using dummy regulator [ 21.275547] OOM killer enabled. [ 21.278682] Restarting tasks ... done. [ 21.283229] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.327457] PM: suspend entry (deep) [ 22.331057] PM: Syncing filesystems ... done. [ 22.336744] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.344918] OOM killer disabled. [ 22.348155] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.356647] Suspending console(s) (use no_console_suspend to debug) [ 22.541287] Disabling non-boot CPUs ... [ 22.717740] IRQ17 no longer affine to CPU3 [ 22.718262] Entering suspend state LP1 [ 22.718287] Enabling non-boot CPUs ... [ 22.719065] CPU1 is up [ 22.719723] CPU2 is up [ 22.720437] CPU3 is up [ 22.761735] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.773880] mmc1: Switching to 3.3V signalling voltage failed [ 22.988047] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.300848] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.301017] panel-simple panel: panel supply power not found, using dummy regulator [ 23.355420] OOM killer enabled. [ 23.358580] Restarting tasks ... done. [ 23.362964] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 24.417487] PM: suspend entry (deep) [ 24.421080] PM: Syncing filesystems ... done. [ 24.426707] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.434857] OOM killer disabled. [ 24.438096] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.446589] Suspending console(s) (use no_console_suspend to debug) [ 24.631155] Disabling non-boot CPUs ... [ 24.828231] Entering suspend state LP1 [ 24.828256] Enabling non-boot CPUs ... [ 24.829035] CPU1 is up [ 24.829699] CPU2 is up [ 24.830413] CPU3 is up [ 24.881595] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.893784] mmc1: Switching to 3.3V signalling voltage failed [ 25.108019] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 25.422293] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.422466] panel-simple panel: panel supply power not found, using dummy regulator [ 25.472710] OOM killer enabled. [ 25.475839] Restarting tasks ... done. [ 25.480103] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE