U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6384368 (616af0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.1 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616af0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180209-231237-g611f09f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Feb 8 19:03:11 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2848K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008026] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017558] Switching to timer-based delay loop, resolution 1000ns [ 0.024092] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029778] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040525] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048496] Switching to timer-based delay loop, resolution 83ns [ 0.054680] Console: colour dummy device 80x30 [ 0.058904] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069214] pid_max: default: 32768 minimum: 301 [ 0.073980] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080396] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087728] CPU: Testing write buffer coherency: ok [ 0.092407] /cpus/cpu@0 missing clock-frequency property [ 0.097559] /cpus/cpu@1 missing clock-frequency property [ 0.102856] /cpus/cpu@2 missing clock-frequency property [ 0.108132] /cpus/cpu@3 missing clock-frequency property [ 0.113415] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153459] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158114] Hierarchical SRCU implementation. [ 0.173682] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193464] smp: Bringing up secondary CPUs ... [ 0.243765] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323793] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403834] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413612] smp: Brought up 1 node, 4 CPUs [ 0.432695] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438848] CPU: All CPU(s) started in SVC mode. [ 0.444138] devtmpfs: initialized [ 0.453566] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458609] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466255] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475855] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482131] pinctrl core: initialized pinctrl subsystem [ 0.487666] NET: Registered protocol family 16 [ 0.492069] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498987] cpuidle: using governor menu [ 0.509908] No ATAGs? [ 0.509968] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518310] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524994] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532673] iommu: Adding device 50000000.host1x to group 0 [ 0.538085] iommu: Adding device 54200000.dc to group 1 [ 0.543285] iommu: Adding device 54240000.dc to group 1 [ 0.548484] iommu: Adding device 57000000.gpu to group 2 [ 0.559573] +5V_SYS: supplied by +VDD_MUX [ 0.561798] +3.3V_SYS: supplied by +VDD_MUX [ 0.566125] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571458] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579562] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585498] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593612] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599365] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607480] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613232] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621404] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628225] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636413] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642265] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650859] vgaarb: loaded [ 0.653363] SCSI subsystem initialized [ 0.656920] libata version 3.00 loaded. [ 0.660767] usbcore: registered new interface driver usbfs [ 0.666123] usbcore: registered new interface driver hub [ 0.671436] usbcore: registered new device driver usb [ 0.677645] Linux video capture interface: v2.00 [ 0.681031] pps_core: LinuxPPS API ver. 1 registered [ 0.685955] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695056] PTP clock support registered [ 0.699102] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706316] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712487] Advanced Linux Sound Architecture Driver Initialized. [ 0.718697] Bluetooth: Core ver 2.22 [ 0.722016] NET: Registered protocol family 31 [ 0.726425] Bluetooth: HCI device and connection manager initialized [ 0.732746] Bluetooth: HCI socket layer initialized [ 0.737603] Bluetooth: L2CAP socket layer initialized [ 0.742639] Bluetooth: SCO socket layer initialized [ 0.747728] clocksource: Switched to clocksource arch_sys_counter [ 0.785818] NET: Registered protocol family 2 [ 0.788645] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795905] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802950] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809383] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815823] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827992] NET: Registered protocol family 1 [ 0.842517] RPC: Registered named UNIX socket transport module. [ 0.846514] RPC: Registered udp transport module. [ 0.851205] RPC: Registered tcp transport module. [ 0.855874] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.862536] PCI: CLS 0 bytes, default 64 [ 0.866879] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.875025] Initialise system trusted keyrings [ 0.878839] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885648] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891274] NFS: Registering the id_resolver key type [ 0.896006] Key type id_resolver registered [ 0.900173] Key type id_legacy registered [ 0.905874] Key type asymmetric registered [ 0.908233] Asymmetric key parser 'x509' registered [ 0.913122] bounce: pool size: 64 pages [ 0.916908] io scheduler noop registered (default) [ 0.921675] io scheduler mq-deadline registered [ 0.926160] io scheduler kyber registered [ 0.930790] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943295] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949391] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964953] console [ttyS0] disabled [ 0.967862] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976779] console [ttyS0] enabled [ 0.976779] console [ttyS0] enabled [ 0.983043] bootconsole [earlycon0] disabled [ 0.983043] bootconsole [earlycon0] disabled [ 1.009118] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015591] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.023099] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034516] loop: module loaded [ 1.038244] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048316] as3722-sd2: supplied by +5V_SYS [ 1.052741] as3722-sd3: supplied by +5V_SYS [ 1.057078] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063269] as3722-sd4: supplied by +5V_SYS [ 1.067604] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073360] as3722-sd5: supplied by +5V_SYS [ 1.078978] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084720] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090747] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096379] as3722-ldo3: supplied by +3.3V_SYS [ 1.100839] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108417] as3722-ldo4: supplied by +3.3V_SYS [ 1.113014] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119037] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123813] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130514] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136545] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141329] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147882] as3722-ldo9: supplied by +5V_SYS [ 1.152453] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158668] as3722-ldo10: supplied by +5V_SYS [ 1.163181] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169635] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192176] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207068] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.222608] libphy: Fixed MDIO Bus: probed [ 1.226694] CAN device driver interface [ 1.230546] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.237489] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.243120] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.250530] usbcore: registered new interface driver pegasus [ 1.256199] usbcore: registered new interface driver asix [ 1.261608] usbcore: registered new interface driver ax88179_178a [ 1.267702] usbcore: registered new interface driver cdc_ether [ 1.273553] usbcore: registered new interface driver smsc75xx [ 1.279318] usbcore: registered new interface driver smsc95xx [ 1.285068] usbcore: registered new interface driver net1080 [ 1.290737] usbcore: registered new interface driver cdc_subset [ 1.296657] usbcore: registered new interface driver zaurus [ 1.302246] usbcore: registered new interface driver cdc_ncm [ 1.307988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.314498] ehci-pci: EHCI PCI platform driver [ 1.318955] tegra-ehci: Tegra EHCI driver [ 1.323214] usbcore: registered new interface driver cdc_acm [ 1.328864] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.336868] usbcore: registered new interface driver cdc_wdm [ 1.342544] usbcore: registered new interface driver usb-storage [ 1.349206] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.368830] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.375688] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.382445] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.389592] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.395868] i2c /dev entries driver [ 1.399789] usbcore: registered new interface driver uvcvideo [ 1.405519] USB Video Class driver (1.1.1) [ 1.409611] gspca_main: v2.14.0 registered [ 1.413923] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.422584] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.430925] sdhci: Secure Digital Host Controller Interface driver [ 1.437089] sdhci: Copyright(c) Pierre Ossman [ 1.441445] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.447216] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.461020] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.465892] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.485859] mmc0: Unknown controller version (3). You may experience problems. [ 1.493100] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.529872] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.537582] usbcore: registered new interface driver usbhid [ 1.543261] usbhid: USB HID core driver [ 1.549352] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.597598] mmc0: new high speed MMC card at address 0001 [ 1.603523] max98090 0-0010: MAX98090 REVID=0x43 [ 1.604953] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.614227] max98090 0-0010: use default 2.8v micbias [ 1.614519] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.627057] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.633095] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.633283] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.647967] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.649843] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.655951] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.669902] NET: Registered protocol family 10 [ 1.674956] Segment Routing with IPv6 [ 1.678688] mip6: Mobile IPv6 [ 1.681646] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.688108] NET: Registered protocol family 17 [ 1.692544] NET: Registered protocol family 15 [ 1.696975] can: controller area network core (rev 20170425 abi 9) [ 1.703223] NET: Registered protocol family 29 [ 1.707654] can: raw protocol (rev 20170425) [ 1.711920] can: broadcast manager protocol (rev 20170425 t) [ 1.717566] can: netlink gateway (rev 20170425) max_hops=1 [ 1.723118] Bluetooth: RFCOMM socket layer initialized [ 1.728260] Bluetooth: RFCOMM ver 1.11 [ 1.732002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.737300] Bluetooth: BNEP socket layer initialized [ 1.742257] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.748168] Bluetooth: HIDP socket layer initialized [ 1.753215] Key type dns_resolver registered [ 1.757672] Registering SWP/SWPB emulation handler [ 1.762719] Loading compiled-in X.509 certificates [ 1.774867] +3.3V_RUN: supplied by +3.3V_SYS [ 1.779864] +VDD_LED: supplied by +VDD_MUX [ 1.784058] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.789743] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.794450] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.799194] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.804367] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.809096] +5V_USB_HS: supplied by +5V_SYS [ 1.813416] +5V_USB_SS: supplied by +5V_SYS [ 1.818547] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.823828] +3.3V_LP0: supplied by +3.3V_SYS [ 1.828852] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.834683] +5V_HDMI_CON: supplied by +5V_SYS [ 1.839661] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.846393] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.859464] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.865679] panel-simple panel: panel supply power not found, using dummy regulator [ 1.938461] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.945857] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.951296] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.960828] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.969458] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.975836] hub 1-0:1.0: USB hub found [ 1.979661] hub 1-0:1.0: 6 ports detected [ 1.984038] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.989441] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.997107] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.005602] hub 2-0:1.0: USB hub found [ 2.009415] hub 2-0:1.0: 2 ports detected [ 2.014441] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.027952] mmc1: Unknown controller version (3). You may experience problems. [ 2.035194] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.041667] mmc1: Switching to 3.3V signalling voltage failed [ 2.070476] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.078112] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.082987] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.093226] mmc2: Unknown controller version (3). You may experience problems. [ 2.100562] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.136231] mmc1: new high speed SDIO card at address 0001 [ 2.142059] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.149662] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.155824] panel-simple panel: panel supply power not found, using dummy regulator [ 2.163939] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.170572] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.176797] panel-simple panel: panel supply power not found, using dummy regulator [ 2.184734] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.193536] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.203405] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.210249] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.218927] cfg80211: failed to load regulatory.db [ 2.223994] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.228588] +1.8V_RUN_CAM: disabling [ 2.232343] +1.2V_RUN_CAM_FRONT: disabling [ 2.236653] +1.05V_RUN_CAM_REAR: disabling [ 2.240992] +2.8V_RUN_TOUCH: disabling [ 2.244955] +2.8V_RUN_CAM_AF: disabling [ 2.249230] +1.8V_RUN_VPP_FUSE: disabling [ 2.253406] +VDD_LED: disabling [ 2.256604] +5V_VDD_TS_SW: disabling [ 2.260244] +3.3V_PANEL: disabling [ 2.263681] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.268271] +5V_HDMI_CON: disabling [ 2.271793] ALSA device list: [ 2.274765] #1: GoogleNyanBig [ 2.357787] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.403343] mmc2: new high speed SDHC card at address 0007 [ 2.410692] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.424165] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.430368] GPT:3014591 != 15564799 [ 2.433848] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.441323] GPT:3014591 != 15564799 [ 2.444801] GPT: Use GNU Parted to correct GPT errors. [ 2.449954] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.456951] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.463268] panel-simple panel: panel supply power not found, using dummy regulator [ 2.680343] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.695134] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.704813] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.711066] panel-simple panel: panel supply power not found, using dummy regulator [ 3.047820] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 3.308163] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.314388] panel-simple panel: panel supply power not found, using dummy regulator [ 3.322491] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 3.708153] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.719217] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.719520] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 3.725512] panel-simple panel: panel supply power not found, using dummy regulator [ 4.067821] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.102486] EXT4-fs (mmcblk0p3): recovery complete [ 4.107272] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.115390] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 4.122295] devtmpfs: mounted [ 4.125674] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# [ 5.319471] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.328151] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.334379] panel-simple panel: panel supply power not found, using dummy regulator [ 5.525164] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.533554] sd 0:0:0:0: [sda] Write Protect is off [ 5.538396] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.544559] sd 0:0:0:0: [sda] No Caching mode page found [ 5.549901] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.575378] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.588118] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 6.659860] PM: suspend entry (deep) [ 6.663429] PM: Syncing filesystems ... done. [ 6.669143] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.677248] OOM killer disabled. [ 6.680502] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.689052] Suspending console(s) (use no_console_suspend to debug) [ 6.881760] Disabling non-boot CPUs ... [ 6.917918] IRQ17 no longer affine to CPU1 [ 7.028412] Entering suspend state LP1 [ 7.028438] Enabling non-boot CPUs ... [ 7.029189] CPU1 is up [ 7.029822] CPU2 is up [ 7.030523] CPU3 is up [ 7.071529] cros-ec-spi spi0.0: spi transfer failed: -121 [ 7.083669] mmc1: Switching to 3.3V signalling voltage failed [ 8.118495] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.118668] panel-simple panel: panel supply power not found, using dummy regulator [ 8.166215] OOM killer enabled. [ 8.169381] Restarting tasks ... done. [ 8.174070] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 8.787379] PM: suspend entry (deep) [ 8.790970] PM: Syncing filesystems ... done. [ 8.796677] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.804850] OOM killer disabled. [ 8.808086] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.816674] Suspending console(s) (use no_console_suspend to debug) [ 9.001224] Disabling non-boot CPUs ... [ 9.148381] Entering suspend state LP1 [ 9.148407] Enabling non-boot CPUs ... [ 9.149197] CPU1 is up [ 9.149837] CPU2 is up [ 9.150549] CPU3 is up [ 9.201728] cros-ec-spi spi0.0: spi transfer failed: -121 [ 9.213818] mmc1: Switching to 3.3V signalling voltage failed [ 9.742950] tegra-sor 54540000.sor: failed to probe output: -517 [ 9.743120] panel-simple panel: panel supply power not found, using dummy regulator [ 9.786552] OOM killer enabled. [ 9.789720] Restarting tasks ... done. [ 9.794121] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 10.905504] PM: suspend entry (deep) [ 10.909089] PM: Syncing filesystems ... done. [ 10.914553] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.922640] OOM killer disabled. [ 10.925856] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.934455] Suspending console(s) (use no_console_suspend to debug) [ 11.121711] Disabling non-boot CPUs ... [ 11.258432] Entering suspend state LP1 [ 11.258457] Enabling non-boot CPUs ... [ 11.259248] CPU1 is up [ 11.259903] CPU2 is up [ 11.260616] CPU3 is up [ 11.311697] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.323655] mmc1: Switching to 3.3V signalling voltage failed [ 11.538182] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.852419] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.852590] panel-simple panel: panel supply power not found, using dummy regulator [ 11.902840] OOM killer enabled. [ 11.905969] Restarting tasks ... done. [ 11.910198] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 13.015599] PM: suspend entry (deep) [ 13.019175] PM: Syncing filesystems ... done. [ 13.024642] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.032822] OOM killer disabled. [ 13.036039] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.044649] Suspending console(s) (use no_console_suspend to debug) [ 13.231365] Disabling non-boot CPUs ... [ 13.398332] Entering suspend state LP1 [ 13.398357] Enabling non-boot CPUs ... [ 13.399148] CPU1 is up [ 13.399796] CPU2 is up [ 13.400505] CPU3 is up [ 13.451600] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.464075] mmc1: Switching to 3.3V signalling voltage failed [ 13.992837] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.993008] panel-simple panel: panel supply power not found, using dummy regulator [ 14.036389] OOM killer enabled. [ 14.039531] Restarting tasks ... done. [ 14.043747] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 15.157470] PM: suspend entry (deep) [ 15.161113] PM: Syncing filesystems ... done. [ 15.166857] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.175027] OOM killer disabled. [ 15.178263] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.186852] Suspending console(s) (use no_console_suspend to debug) [ 15.371704] Disabling non-boot CPUs ... [ 15.537789] IRQ17 no longer affine to CPU3 [ 15.538318] Entering suspend state LP1 [ 15.538343] Enabling non-boot CPUs ... [ 15.539138] CPU1 is up [ 15.539793] CPU2 is up [ 15.540499] CPU3 is up [ 15.591458] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.603723] mmc1: Switching to 3.3V signalling voltage failed [ 16.136642] tegra-sor 54540000.sor: failed to probe output: -517 [ 16.136813] panel-simple panel: panel supply power not found, using dummy regulator [ 16.184388] OOM killer enabled. [ 16.187529] Restarting tasks ... done. [ 16.191860] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 17.297352] PM: suspend entry (deep) [ 17.300951] PM: Syncing filesystems ... done. [ 17.306617] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.314779] OOM killer disabled. [ 17.318016] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.326604] Suspending console(s) (use no_console_suspend to debug) [ 17.511589] Disabling non-boot CPUs ... [ 17.678269] Entering suspend state LP1 [ 17.678295] Enabling non-boot CPUs ... [ 17.679088] CPU1 is up [ 17.679731] CPU2 is up [ 17.680437] CPU3 is up [ 17.731523] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.743621] mmc1: Switching to 3.3V signalling voltage failed [ 18.272778] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.272947] panel-simple panel: panel supply power not found, using dummy regulator [ 18.316362] OOM killer enabled. [ 18.319522] Restarting tasks ... done. [ 18.324101] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 19.435497] PM: suspend entry (deep) [ 19.439080] PM: Syncing filesystems ... done. [ 19.444549] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.452732] OOM killer disabled. [ 19.455949] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.464564] Suspending console(s) (use no_console_suspend to debug) [ 19.651108] Disabling non-boot CPUs ... [ 19.817733] IRQ17 no longer affine to CPU3 [ 19.818276] Entering suspend state LP1 [ 19.818302] Enabling non-boot CPUs ... [ 19.819083] CPU1 is up [ 19.819749] CPU2 is up [ 19.820463] CPU3 is up [ 19.871579] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.883862] mmc1: Switching to 3.3V signalling voltage failed [ 20.098077] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 20.412037] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.412208] panel-simple panel: panel supply power not found, using dummy regulator [ 20.466693] OOM killer enabled. [ 20.469857] Restarting tasks ... done. [ 20.474133] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 21.575497] PM: suspend entry (deep) [ 21.579074] PM: Syncing filesystems ... done. [ 21.584546] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.592727] OOM killer disabled. [ 21.595943] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.604558] Suspending console(s) (use no_console_suspend to debug) [ 21.791088] Disabling non-boot CPUs ... [ 21.937713] IRQ17 no longer affine to CPU3 [ 21.938258] Entering suspend state LP1 [ 21.938283] Enabling non-boot CPUs ... [ 21.939069] CPU1 is up [ 21.939714] CPU2 is up [ 21.940426] CPU3 is up [ 21.991416] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.003840] mmc1: Switching to 3.3V signalling voltage failed [ 22.218057] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 22.532469] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.532641] panel-simple panel: panel supply power not found, using dummy regulator [ 22.587044] OOM killer enabled. [ 22.590208] Restarting tasks ... done. [ 22.594423] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 23.695455] PM: suspend entry (deep) [ 23.699037] PM: Syncing filesystems ... done. [ 23.704506] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.712688] OOM killer disabled. [ 23.715904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.724515] Suspending console(s) (use no_console_suspend to debug) [ 23.911254] Disabling non-boot CPUs ... [ 24.078228] Entering suspend state LP1 [ 24.078254] Enabling non-boot CPUs ... [ 24.079036] CPU1 is up [ 24.079690] CPU2 is up [ 24.080403] CPU3 is up [ 24.131551] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.143627] mmc1: Switching to 3.3V signalling voltage failed [ 24.671622] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.671795] panel-simple panel: panel supply power not found, using dummy regulator [ 24.715167] OOM killer enabled. [ 24.718309] Restarting tasks ... done. [ 24.722540] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 25.835416] PM: suspend entry (deep) [ 25.838992] PM: Syncing filesystems ... done. [ 25.844455] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.852541] OOM killer disabled. [ 25.855757] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.864355] Suspending console(s) (use no_console_suspend to debug) [ 26.051505] Disabling non-boot CPUs ... [ 26.217663] IRQ17 no longer affine to CPU3 [ 26.218229] Entering suspend state LP1 [ 26.218255] Enabling non-boot CPUs ... [ 26.219039] CPU1 is up [ 26.219683] CPU2 is up [ 26.220395] CPU3 is up [ 26.271527] cros-ec-spi spi0.0: spi transfer failed: -121 [ 26.283923] mmc1: Switching to 3.3V signalling voltage failed [ 26.497904] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 26.812680] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.812852] panel-simple panel: panel supply power not found, using dummy regulator [ 26.867172] OOM killer enabled. [ 26.870307] Restarting tasks ... done. [ 26.874554] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE