U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.6 MiB/s done Bytes transferred = 6384600 (616bd8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616bd8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180207-231047-g5d1c989 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Feb 6 20:17:41 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2848K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008023] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017554] Switching to timer-based delay loop, resolution 1000ns [ 0.024096] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029775] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040522] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048493] Switching to timer-based delay loop, resolution 83ns [ 0.054674] Console: colour dummy device 80x30 [ 0.058901] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069211] pid_max: default: 32768 minimum: 301 [ 0.073979] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080393] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087733] CPU: Testing write buffer coherency: ok [ 0.092408] /cpus/cpu@0 missing clock-frequency property [ 0.097557] /cpus/cpu@1 missing clock-frequency property [ 0.102853] /cpus/cpu@2 missing clock-frequency property [ 0.108130] /cpus/cpu@3 missing clock-frequency property [ 0.113412] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153457] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158113] Hierarchical SRCU implementation. [ 0.173680] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193461] smp: Bringing up secondary CPUs ... [ 0.243760] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323790] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403830] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413607] smp: Brought up 1 node, 4 CPUs [ 0.432691] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438843] CPU: All CPU(s) started in SVC mode. [ 0.444130] devtmpfs: initialized [ 0.453709] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458754] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475998] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482275] pinctrl core: initialized pinctrl subsystem [ 0.487806] NET: Registered protocol family 16 [ 0.492215] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499131] cpuidle: using governor menu [ 0.510027] No ATAGs? [ 0.510088] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518430] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525110] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532795] iommu: Adding device 50000000.host1x to group 0 [ 0.538206] iommu: Adding device 54200000.dc to group 1 [ 0.543407] iommu: Adding device 54240000.dc to group 1 [ 0.548606] iommu: Adding device 57000000.gpu to group 2 [ 0.559679] +5V_SYS: supplied by +VDD_MUX [ 0.561905] +3.3V_SYS: supplied by +VDD_MUX [ 0.566234] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571566] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579668] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585605] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593719] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599471] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607588] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613338] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621512] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628331] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636528] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642372] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650958] vgaarb: loaded [ 0.653467] SCSI subsystem initialized [ 0.657027] libata version 3.00 loaded. [ 0.660881] usbcore: registered new interface driver usbfs [ 0.666229] usbcore: registered new interface driver hub [ 0.671536] usbcore: registered new device driver usb [ 0.677745] Linux video capture interface: v2.00 [ 0.681138] pps_core: LinuxPPS API ver. 1 registered [ 0.686068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695163] PTP clock support registered [ 0.699203] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706423] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712601] Advanced Linux Sound Architecture Driver Initialized. [ 0.718804] Bluetooth: Core ver 2.22 [ 0.722122] NET: Registered protocol family 31 [ 0.726531] Bluetooth: HCI device and connection manager initialized [ 0.732853] Bluetooth: HCI socket layer initialized [ 0.737710] Bluetooth: L2CAP socket layer initialized [ 0.742746] Bluetooth: SCO socket layer initialized [ 0.747840] clocksource: Switched to clocksource arch_sys_counter [ 0.786130] NET: Registered protocol family 2 [ 0.788964] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.796217] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.803273] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809697] TCP: Hash tables configured (established 8192 bind 8192) [ 0.816130] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821883] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.828309] NET: Registered protocol family 1 [ 0.832797] RPC: Registered named UNIX socket transport module. [ 0.838423] RPC: Registered udp transport module. [ 0.843084] RPC: Registered tcp transport module. [ 0.847763] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864428] PCI: CLS 0 bytes, default 64 [ 0.867129] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.875268] Initialise system trusted keyrings [ 0.879088] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885897] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891548] NFS: Registering the id_resolver key type [ 0.896251] Key type id_resolver registered [ 0.900418] Key type id_legacy registered [ 0.906066] Key type asymmetric registered [ 0.908486] Asymmetric key parser 'x509' registered [ 0.913368] bounce: pool size: 64 pages [ 0.917159] io scheduler noop registered (default) [ 0.921907] io scheduler mq-deadline registered [ 0.926406] io scheduler kyber registered [ 0.931043] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943529] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949639] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958410] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.965184] console [ttyS0] disabled [ 0.968103] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.977012] console [ttyS0] enabled [ 0.977012] console [ttyS0] enabled [ 0.983246] bootconsole [earlycon0] disabled [ 0.983246] bootconsole [earlycon0] disabled [ 1.008099] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.014572] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.022086] panel-simple panel: panel supply power not found, using dummy regulator [ 1.033508] loop: module loaded [ 1.037217] as3722 4-0040: AS3722 with revision 0x1 found [ 1.047313] as3722-sd2: supplied by +5V_SYS [ 1.051754] as3722-sd3: supplied by +5V_SYS [ 1.056089] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.062284] as3722-sd4: supplied by +5V_SYS [ 1.066621] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.072377] as3722-sd5: supplied by +5V_SYS [ 1.077941] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.083682] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.089707] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.095340] as3722-ldo3: supplied by +3.3V_SYS [ 1.099800] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.107374] as3722-ldo4: supplied by +3.3V_SYS [ 1.111979] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118000] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.122775] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.129474] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.135506] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.140288] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.146837] as3722-ldo9: supplied by +5V_SYS [ 1.151416] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.157620] as3722-ldo10: supplied by +5V_SYS [ 1.162142] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.168591] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.191106] cros-ec-spi spi0.0: Chrome EC device registered [ 1.206044] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.221581] libphy: Fixed MDIO Bus: probed [ 1.225665] CAN device driver interface [ 1.229517] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.236460] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.242092] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.249503] usbcore: registered new interface driver pegasus [ 1.255172] usbcore: registered new interface driver asix [ 1.260582] usbcore: registered new interface driver ax88179_178a [ 1.266675] usbcore: registered new interface driver cdc_ether [ 1.272527] usbcore: registered new interface driver smsc75xx [ 1.278288] usbcore: registered new interface driver smsc95xx [ 1.284040] usbcore: registered new interface driver net1080 [ 1.289708] usbcore: registered new interface driver cdc_subset [ 1.295628] usbcore: registered new interface driver zaurus [ 1.301216] usbcore: registered new interface driver cdc_ncm [ 1.306949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.313466] ehci-pci: EHCI PCI platform driver [ 1.317924] tegra-ehci: Tegra EHCI driver [ 1.322190] usbcore: registered new interface driver cdc_acm [ 1.327841] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.335843] usbcore: registered new interface driver cdc_wdm [ 1.341521] usbcore: registered new interface driver usb-storage [ 1.348186] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.367686] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.374554] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.381317] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.388459] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.394736] i2c /dev entries driver [ 1.398654] usbcore: registered new interface driver uvcvideo [ 1.404384] USB Video Class driver (1.1.1) [ 1.408475] gspca_main: v2.14.0 registered [ 1.412791] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.421458] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.429799] sdhci: Secure Digital Host Controller Interface driver [ 1.435963] sdhci: Copyright(c) Pierre Ossman [ 1.440319] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.446090] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.457966] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.462836] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.481872] mmc0: Unknown controller version (3). You may experience problems. [ 1.489113] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.525880] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.533595] usbcore: registered new interface driver usbhid [ 1.539272] usbhid: USB HID core driver [ 1.545362] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.588339] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594884] max98090 0-0010: use default 2.8v micbias [ 1.602448] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.609021] mmc0: new high speed MMC card at address 0001 [ 1.616249] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.623449] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.629621] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.637949] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.646316] NET: Registered protocol family 10 [ 1.647099] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.651519] Segment Routing with IPv6 [ 1.656804] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.660405] mip6: Mobile IPv6 [ 1.670499] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.670744] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.677082] NET: Registered protocol family 17 [ 1.686493] NET: Registered protocol family 15 [ 1.690930] can: controller area network core (rev 20170425 abi 9) [ 1.697178] NET: Registered protocol family 29 [ 1.701616] can: raw protocol (rev 20170425) [ 1.705873] can: broadcast manager protocol (rev 20170425 t) [ 1.711528] can: netlink gateway (rev 20170425) max_hops=1 [ 1.717085] Bluetooth: RFCOMM socket layer initialized [ 1.722226] Bluetooth: RFCOMM ver 1.11 [ 1.725967] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.731272] Bluetooth: BNEP socket layer initialized [ 1.736222] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.742133] Bluetooth: HIDP socket layer initialized [ 1.747194] Key type dns_resolver registered [ 1.751660] Registering SWP/SWPB emulation handler [ 1.756719] Loading compiled-in X.509 certificates [ 1.768643] +3.3V_RUN: supplied by +3.3V_SYS [ 1.773546] +VDD_LED: supplied by +VDD_MUX [ 1.777743] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.783369] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.788049] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.792759] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.797977] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.802684] +5V_USB_HS: supplied by +5V_SYS [ 1.807005] +5V_USB_SS: supplied by +5V_SYS [ 1.812247] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.817361] +3.3V_LP0: supplied by +3.3V_SYS [ 1.822390] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.828250] +5V_HDMI_CON: supplied by +5V_SYS [ 1.833202] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.840015] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.853475] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.859719] panel-simple panel: panel supply power not found, using dummy regulator [ 1.938566] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.945963] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.951399] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.960921] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.969551] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.976134] hub 1-0:1.0: USB hub found [ 1.979959] hub 1-0:1.0: 6 ports detected [ 1.984326] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.989757] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.997446] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.006116] hub 2-0:1.0: USB hub found [ 2.009927] hub 2-0:1.0: 2 ports detected [ 2.014977] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.028099] mmc1: Unknown controller version (3). You may experience problems. [ 2.035345] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.041811] mmc1: Switching to 3.3V signalling voltage failed [ 2.070576] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.078222] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.083093] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.093314] mmc2: Unknown controller version (3). You may experience problems. [ 2.100653] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.136381] mmc1: new high speed SDIO card at address 0001 [ 2.142186] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.149739] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.155895] panel-simple panel: panel supply power not found, using dummy regulator [ 2.163966] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.170917] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.177139] panel-simple panel: panel supply power not found, using dummy regulator [ 2.185238] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 17:01:49 UTC (946746109) [ 2.194123] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.203730] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.210393] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.218362] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.219032] cfg80211: failed to load regulatory.db [ 2.223570] +1.8V_RUN_CAM: disabling [ 2.232209] +1.2V_RUN_CAM_FRONT: disabling [ 2.236480] +1.05V_RUN_CAM_REAR: disabling [ 2.240813] +2.8V_RUN_TOUCH: disabling [ 2.244672] +2.8V_RUN_CAM_AF: disabling [ 2.248967] +1.8V_RUN_VPP_FUSE: disabling [ 2.253185] +VDD_LED: disabling [ 2.256320] +5V_VDD_TS_SW: disabling [ 2.259926] +3.3V_PANEL: disabling [ 2.263320] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.267920] +5V_HDMI_CON: disabling [ 2.271444] ALSA device list: [ 2.274414] #1: GoogleNyanBig [ 2.318285] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.324528] panel-simple panel: panel supply power not found, using dummy regulator [ 2.332730] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.342406] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.357871] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.364702] mmc2: new high speed SDHC card at address 0007 [ 2.372275] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.384983] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.391211] GPT:3014591 != 15564799 [ 2.394690] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.402104] GPT:3014591 != 15564799 [ 2.405583] GPT: Use GNU Parted to correct GPT errors. [ 2.410762] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.419014] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.425175] panel-simple panel: panel supply power not found, using dummy regulator [ 2.576858] EXT4-fs (mmcblk0p3): recovery complete [ 2.582393] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.590536] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.597573] devtmpfs: mounted [ 2.600999] Freeing unused kernel memory: 1024K [ 2.626869] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.632274] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.637599] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.643085] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.648752] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.654332] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.659874] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.665437] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.671180] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.676568] alloc_contig_range: [fbca1, fbca2) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.756635] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.771780] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.781499] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.787662] panel-simple panel: panel supply power not found, using dummy regulator [ 3.127933] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys [ 3.799210] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 root@(none):/# [ 3.810562] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.817799] panel-simple panel: panel supply power not found, using dummy regulator root@(none):/# [ 4.157931] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.346295] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.352874] scsi host0: usb-storage 1-1:1.0 [ 4.357484] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.363673] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399621] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408368] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414584] panel-simple panel: panel supply power not found, using dummy regulator [ 5.605746] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.614722] sd 0:0:0:0: [sda] Write Protect is off [ 5.619544] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.625627] sd 0:0:0:0: [sda] No Caching mode page found [ 5.630968] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.661890] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.676354] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.760633] PM: suspend entry (deep) [ 5.764203] PM: Syncing filesystems ... done. [ 5.770114] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.778281] OOM killer disabled. [ 5.781500] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.790120] Suspending console(s) (use no_console_suspend to debug) [ 5.982042] Disabling non-boot CPUs ... [ 6.127995] IRQ17 no longer affine to CPU3 [ 6.128670] Entering suspend state LP1 [ 6.128695] Enabling non-boot CPUs ... [ 6.129440] CPU1 is up [ 6.130091] CPU2 is up [ 6.130789] CPU3 is up [ 6.171660] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.183870] mmc1: Switching to 3.3V signalling voltage failed [ 6.398370] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.713245] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.713413] panel-simple panel: panel supply power not found, using dummy regulator [ 6.767731] OOM killer enabled. [ 6.770867] Restarting tasks ... done. [ 6.775614] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:31 1970 [ 7.087918] PM: suspend entry (deep) [ 7.091486] PM: Syncing filesystems ... done. [ 7.097214] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.105387] OOM killer disabled. [ 7.108622] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.117214] Suspending console(s) (use no_console_suspend to debug) [ 7.301422] Disabling non-boot CPUs ... [ 7.458485] Entering suspend state LP1 [ 7.458511] Enabling non-boot CPUs ... [ 7.459296] CPU1 is up [ 7.459958] CPU2 is up [ 7.460669] CPU3 is up [ 7.511830] cros-ec-spi spi0.0: spi transfer failed: -121 [ 7.524230] mmc1: Switching to 3.3V signalling voltage failed [ 8.051247] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.051415] panel-simple panel: panel supply power not found, using dummy regulator [ 8.094834] OOM killer enabled. [ 8.097984] Restarting tasks ... done. [ 8.102585] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:35 1970 [ 8.417620] PM: suspend entry (deep) [ 8.421212] PM: Syncing filesystems ... done. [ 8.426908] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.435065] OOM killer disabled. [ 8.438302] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.446898] Suspending console(s) (use no_console_suspend to debug) [ 8.631393] Disabling non-boot CPUs ... [ 8.788472] Entering suspend state LP1 [ 8.788497] Enabling non-boot CPUs ... [ 8.789285] CPU1 is up [ 8.789950] CPU2 is up [ 8.790664] CPU3 is up [ 8.841819] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.853915] mmc1: Switching to 3.3V signalling voltage failed [ 9.068287] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 9.383891] tegra-sor 54540000.sor: failed to probe output: -517 [ 9.384061] panel-simple panel: panel supply power not found, using dummy regulator [ 9.434301] OOM killer enabled. [ 9.437430] Restarting tasks ... done. [ 9.441855] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:40 1970 [ 10.746679] PM: suspend entry (deep) [ 10.750267] PM: Syncing filesystems ... done. [ 10.755817] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.764000] OOM killer disabled. [ 10.767216] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.775810] Suspending console(s) (use no_console_suspend to debug) [ 10.961740] Disabling non-boot CPUs ... [ 11.128433] Entering suspend state LP1 [ 11.128459] Enabling non-boot CPUs ... [ 11.129243] CPU1 is up [ 11.129909] CPU2 is up [ 11.130628] CPU3 is up [ 11.181731] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.194064] mmc1: Switching to 3.3V signalling voltage failed [ 11.722744] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.722913] panel-simple panel: panel supply power not found, using dummy regulator [ 11.766331] OOM killer enabled. [ 11.769492] Restarting tasks ... done. [ 11.773819] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:45 1970 [ 13.086378] PM: suspend entry (deep) [ 13.089963] PM: Syncing filesystems ... done. [ 13.095438] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.103617] OOM killer disabled. [ 13.106834] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.115428] Suspending console(s) (use no_console_suspend to debug) [ 13.301664] Disabling non-boot CPUs ... [ 13.468437] Entering suspend state LP1 [ 13.468462] Enabling non-boot CPUs ... [ 13.469248] CPU1 is up [ 13.469916] CPU2 is up [ 13.470627] CPU3 is up [ 13.521756] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.534047] mmc1: Switching to 3.3V signalling voltage failed [ 14.062665] tegra-sor 54540000.sor: failed to probe output: -517 [ 14.062834] panel-simple panel: panel supply power not found, using dummy regulator [ 14.106209] OOM killer enabled. [ 14.109351] Restarting tasks ... done. [ 14.113794] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 14.426551] PM: suspend entry (deep) [ 14.430141] PM: Syncing filesystems ... done. [ 14.435630] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.443806] OOM killer disabled. [ 14.447022] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.455623] Suspending console(s) (use no_console_suspend to debug) [ 14.641738] Disabling non-boot CPUs ... [ 14.808391] Entering suspend state LP1 [ 14.808416] Enabling non-boot CPUs ... [ 14.809202] CPU1 is up [ 14.809870] CPU2 is up [ 14.810583] CPU3 is up [ 14.861666] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.874126] mmc1: Switching to 3.3V signalling voltage failed [ 15.088185] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.402674] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.402842] panel-simple panel: panel supply power not found, using dummy regulator [ 15.453093] OOM killer enabled. [ 15.456222] Restarting tasks ... done. [ 15.460631] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 16.765837] PM: suspend entry (deep) [ 16.769424] PM: Syncing filesystems ... done. [ 16.774898] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.783076] OOM killer disabled. [ 16.786293] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.794906] Suspending console(s) (use no_console_suspend to debug) [ 16.981829] Disabling non-boot CPUs ... [ 17.087872] IRQ17 no longer affine to CPU2 [ 17.148382] Entering suspend state LP1 [ 17.148407] Enabling non-boot CPUs ... [ 17.149190] CPU1 is up [ 17.149859] CPU2 is up [ 17.150570] CPU3 is up [ 17.201939] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.214163] mmc1: Switching to 3.3V signalling voltage failed [ 17.741713] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.741882] panel-simple panel: panel supply power not found, using dummy regulator [ 17.789416] OOM killer enabled. [ 17.792556] Restarting tasks ... done. [ 17.796950] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.106470] PM: suspend entry (deep) [ 18.110057] PM: Syncing filesystems ... done. [ 18.115594] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.123684] OOM killer disabled. [ 18.126900] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.135486] Suspending console(s) (use no_console_suspend to debug) [ 18.321224] Disabling non-boot CPUs ... [ 18.487816] IRQ17 no longer affine to CPU3 [ 18.488346] Entering suspend state LP1 [ 18.488371] Enabling non-boot CPUs ... [ 18.489156] CPU1 is up [ 18.489827] CPU2 is up [ 18.490541] CPU3 is up [ 18.541693] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.553958] mmc1: Switching to 3.3V signalling voltage failed [ 19.081522] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.081692] panel-simple panel: panel supply power not found, using dummy regulator [ 19.129249] OOM killer enabled. [ 19.132385] Restarting tasks ... done. [ 19.136708] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 19.447571] PM: suspend entry (deep) [ 19.451163] PM: Syncing filesystems ... done. [ 19.456789] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.464876] OOM killer disabled. [ 19.468109] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.476680] Suspending console(s) (use no_console_suspend to debug) [ 19.661871] Disabling non-boot CPUs ... [ 19.828336] Entering suspend state LP1 [ 19.828360] Enabling non-boot CPUs ... [ 19.829144] CPU1 is up [ 19.829819] CPU2 is up [ 19.830527] CPU3 is up [ 19.881614] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.893791] mmc1: Switching to 3.3V signalling voltage failed [ 20.108143] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 20.422459] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.422627] panel-simple panel: panel supply power not found, using dummy regulator [ 20.472850] OOM killer enabled. [ 20.475980] Restarting tasks ... done. [ 20.480207] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:06 1970 [ 20.786682] PM: suspend entry (deep) [ 20.790272] PM: Syncing filesystems ... done. [ 20.795916] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.804116] OOM killer disabled. [ 20.807333] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.815828] Suspending console(s) (use no_console_suspend to debug) [ 21.001123] Disabling non-boot CPUs ... [ 21.057818] IRQ17 no longer affine to CPU1 [ 21.178293] Entering suspend state LP1 [ 21.178319] Enabling non-boot CPUs ... [ 21.179107] CPU1 is up [ 21.179763] CPU2 is up [ 21.180483] CPU3 is up [ 21.231540] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.243808] mmc1: Switching to 3.3V signalling voltage failed [ 21.771170] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.771339] panel-simple panel: panel supply power not found, using dummy regulator [ 21.818869] OOM killer enabled. [ 21.822010] Restarting tasks ... done. [ 21.826220] PM: suspend exit root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE root@(none):/#