U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6385768 (617068 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x617068 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180206-230918-g417c85c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Feb 6 03:32:30 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008026] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017558] Switching to timer-based delay loop, resolution 1000ns [ 0.024095] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029779] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040526] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048498] Switching to timer-based delay loop, resolution 83ns [ 0.054679] Console: colour dummy device 80x30 [ 0.058905] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069215] pid_max: default: 32768 minimum: 301 [ 0.073983] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080397] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087738] CPU: Testing write buffer coherency: ok [ 0.092410] /cpus/cpu@0 missing clock-frequency property [ 0.097560] /cpus/cpu@1 missing clock-frequency property [ 0.102856] /cpus/cpu@2 missing clock-frequency property [ 0.108134] /cpus/cpu@3 missing clock-frequency property [ 0.113417] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153459] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158114] Hierarchical SRCU implementation. [ 0.173682] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193463] smp: Bringing up secondary CPUs ... [ 0.243764] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323790] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403830] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413607] smp: Brought up 1 node, 4 CPUs [ 0.432690] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438842] CPU: All CPU(s) started in SVC mode. [ 0.444128] devtmpfs: initialized [ 0.453667] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458707] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475957] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482241] pinctrl core: initialized pinctrl subsystem [ 0.487769] NET: Registered protocol family 16 [ 0.492164] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499087] cpuidle: using governor menu [ 0.510068] No ATAGs? [ 0.510126] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518465] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525155] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532831] iommu: Adding device 50000000.host1x to group 0 [ 0.538241] iommu: Adding device 54200000.dc to group 1 [ 0.543442] iommu: Adding device 54240000.dc to group 1 [ 0.548643] iommu: Adding device 57000000.gpu to group 2 [ 0.559759] +5V_SYS: supplied by +VDD_MUX [ 0.561987] +3.3V_SYS: supplied by +VDD_MUX [ 0.566314] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571645] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579748] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585684] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593799] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599552] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607679] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613418] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621591] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628411] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636608] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642451] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651042] vgaarb: loaded [ 0.653549] SCSI subsystem initialized [ 0.657101] libata version 3.00 loaded. [ 0.660960] usbcore: registered new interface driver usbfs [ 0.666309] usbcore: registered new interface driver hub [ 0.671616] usbcore: registered new device driver usb [ 0.677819] Linux video capture interface: v2.00 [ 0.681218] pps_core: LinuxPPS API ver. 1 registered [ 0.686139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695242] PTP clock support registered [ 0.699281] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706503] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712670] Advanced Linux Sound Architecture Driver Initialized. [ 0.718881] Bluetooth: Core ver 2.22 [ 0.722202] NET: Registered protocol family 31 [ 0.726611] Bluetooth: HCI device and connection manager initialized [ 0.732934] Bluetooth: HCI socket layer initialized [ 0.737789] Bluetooth: L2CAP socket layer initialized [ 0.742825] Bluetooth: SCO socket layer initialized [ 0.747918] clocksource: Switched to clocksource arch_sys_counter [ 0.785949] NET: Registered protocol family 2 [ 0.788779] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.796037] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.803083] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809515] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815950] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821692] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.828123] NET: Registered protocol family 1 [ 0.832609] RPC: Registered named UNIX socket transport module. [ 0.838232] RPC: Registered udp transport module. [ 0.842902] RPC: Registered tcp transport module. [ 0.847582] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864251] PCI: CLS 0 bytes, default 64 [ 0.866948] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.875056] Initialise system trusted keyrings [ 0.878905] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885718] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891336] NFS: Registering the id_resolver key type [ 0.896076] Key type id_resolver registered [ 0.900238] Key type id_legacy registered [ 0.905981] Key type asymmetric registered [ 0.908297] Asymmetric key parser 'x509' registered [ 0.913190] bounce: pool size: 64 pages [ 0.916981] io scheduler noop registered (default) [ 0.921727] io scheduler mq-deadline registered [ 0.926227] io scheduler kyber registered [ 0.930859] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943255] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949339] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958143] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964925] console [ttyS0] disabled [ 0.967812] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976749] console [ttyS0] enabled [ 0.976749] console [ttyS0] enabled [ 0.982971] bootconsole [earlycon0] disabled [ 0.982971] bootconsole [earlycon0] disabled [ 1.009099] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015573] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.023081] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034491] loop: module loaded [ 1.038198] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048262] as3722-sd2: supplied by +5V_SYS [ 1.052684] as3722-sd3: supplied by +5V_SYS [ 1.057019] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063206] as3722-sd4: supplied by +5V_SYS [ 1.067541] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073299] as3722-sd5: supplied by +5V_SYS [ 1.078908] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084652] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090680] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096309] as3722-ldo3: supplied by +3.3V_SYS [ 1.100768] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108347] as3722-ldo4: supplied by +3.3V_SYS [ 1.112945] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118975] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123751] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130449] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136482] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141263] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147816] as3722-ldo9: supplied by +5V_SYS [ 1.152396] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158608] as3722-ldo10: supplied by +5V_SYS [ 1.163120] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169575] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192113] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207051] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.212560] libphy: Fixed MDIO Bus: probed [ 1.216645] CAN device driver interface [ 1.220506] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227450] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233068] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240503] usbcore: registered new interface driver pegasus [ 1.246169] usbcore: registered new interface driver asix [ 1.251589] usbcore: registered new interface driver ax88179_178a [ 1.257686] usbcore: registered new interface driver cdc_ether [ 1.263535] usbcore: registered new interface driver smsc75xx [ 1.269295] usbcore: registered new interface driver smsc95xx [ 1.275042] usbcore: registered new interface driver net1080 [ 1.280717] usbcore: registered new interface driver cdc_subset [ 1.286639] usbcore: registered new interface driver zaurus [ 1.292229] usbcore: registered new interface driver cdc_ncm [ 1.297968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304479] ehci-pci: EHCI PCI platform driver [ 1.308935] tegra-ehci: Tegra EHCI driver [ 1.313193] usbcore: registered new interface driver cdc_acm [ 1.318844] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.326847] usbcore: registered new interface driver cdc_wdm [ 1.332522] usbcore: registered new interface driver usb-storage [ 1.339180] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.358676] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.365536] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.372306] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.379449] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.385726] i2c /dev entries driver [ 1.389641] usbcore: registered new interface driver uvcvideo [ 1.395371] USB Video Class driver (1.1.1) [ 1.399463] gspca_main: v2.14.0 registered [ 1.403778] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.412438] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.420776] sdhci: Secure Digital Host Controller Interface driver [ 1.426941] sdhci: Copyright(c) Pierre Ossman [ 1.431295] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.437069] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.450871] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.455742] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.476053] mmc0: Unknown controller version (3). You may experience problems. [ 1.483292] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.520071] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527782] usbcore: registered new interface driver usbhid [ 1.533462] usbhid: USB HID core driver [ 1.539567] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587808] mmc0: new high speed MMC card at address 0001 [ 1.593726] max98090 0-0010: MAX98090 REVID=0x43 [ 1.595147] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604508] max98090 0-0010: use default 2.8v micbias [ 1.604716] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.617329] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.623374] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623549] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.638301] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.640152] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.646279] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.660277] NET: Registered protocol family 10 [ 1.665301] Segment Routing with IPv6 [ 1.669030] mip6: Mobile IPv6 [ 1.671989] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678440] NET: Registered protocol family 17 [ 1.682877] NET: Registered protocol family 15 [ 1.687308] can: controller area network core (rev 20170425 abi 9) [ 1.693555] NET: Registered protocol family 29 [ 1.697997] can: raw protocol (rev 20170425) [ 1.702256] can: broadcast manager protocol (rev 20170425 t) [ 1.707903] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713459] Bluetooth: RFCOMM socket layer initialized [ 1.718602] Bluetooth: RFCOMM ver 1.11 [ 1.722343] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727643] Bluetooth: BNEP socket layer initialized [ 1.732599] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738508] Bluetooth: HIDP socket layer initialized [ 1.743549] Key type dns_resolver registered [ 1.748010] Registering SWP/SWPB emulation handler [ 1.753050] Loading compiled-in X.509 certificates [ 1.764921] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769860] +VDD_LED: supplied by +VDD_MUX [ 1.774057] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779789] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.784496] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.789233] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.794408] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.799139] +5V_USB_HS: supplied by +5V_SYS [ 1.803457] +5V_USB_SS: supplied by +5V_SYS [ 1.808770] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.814202] +3.3V_LP0: supplied by +3.3V_SYS [ 1.819241] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.825071] +5V_HDMI_CON: supplied by +5V_SYS [ 1.830165] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.836901] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.850088] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.856309] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928655] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.936054] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941492] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.951006] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959633] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.966008] hub 1-0:1.0: USB hub found [ 1.969834] hub 1-0:1.0: 6 ports detected [ 1.974201] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979603] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.987267] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995758] hub 2-0:1.0: USB hub found [ 1.999570] hub 2-0:1.0: 2 ports detected [ 2.004594] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.018145] mmc1: Unknown controller version (3). You may experience problems. [ 2.025388] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031857] mmc1: Switching to 3.3V signalling voltage failed [ 2.060665] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.068311] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.073183] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083416] mmc2: Unknown controller version (3). You may experience problems. [ 2.090755] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126386] mmc1: new high speed SDIO card at address 0001 [ 2.132212] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139822] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145985] panel-simple panel: panel supply power not found, using dummy regulator [ 2.154099] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160733] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166958] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174907] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:12:38 UTC (946685558) [ 2.183710] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193523] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200345] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208334] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.208973] cfg80211: failed to load regulatory.db [ 2.213528] +1.8V_RUN_CAM: disabling [ 2.222072] +1.2V_RUN_CAM_FRONT: disabling [ 2.226335] +1.05V_RUN_CAM_REAR: disabling [ 2.230677] +2.8V_RUN_TOUCH: disabling [ 2.234537] +2.8V_RUN_CAM_AF: disabling [ 2.238883] +1.8V_RUN_VPP_FUSE: disabling [ 2.243063] +VDD_LED: disabling [ 2.246230] +5V_VDD_TS_SW: disabling [ 2.249841] +3.3V_PANEL: disabling [ 2.253235] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.257793] +5V_HDMI_CON: disabling [ 2.261355] ALSA device list: [ 2.264323] #1: GoogleNyanBig [ 2.298422] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.304734] panel-simple panel: panel supply power not found, using dummy regulator [ 2.312866] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.322428] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.337947] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.355329] mmc2: new high speed SDHC card at address 0007 [ 2.362709] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.375293] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.381520] GPT:3014591 != 15564799 [ 2.385000] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.392413] GPT:3014591 != 15564799 [ 2.395890] GPT: Use GNU Parted to correct GPT errors. [ 2.401092] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.408092] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.414254] panel-simple panel: panel supply power not found, using dummy regulator [ 2.443320] EXT4-fs (mmcblk0p3): recovery complete [ 2.448851] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.456960] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.463968] devtmpfs: mounted [ 2.467379] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.586562] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.591952] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.597257] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.602606] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.607911] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.613248] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.618560] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.623863] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.629172] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.634473] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.713867] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.728705] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.738202] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.744365] panel-simple panel: panel supply power not found, using dummy regulator [ 3.088011] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.757199] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.768322] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.774488] panel-simple panel: panel supply power not found, using dummy regulator [ 4.118011] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.306317] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.313252] scsi host0: usb-storage 1-1:1.0 [ 4.317863] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.324057] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.319580] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.328320] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.334546] panel-simple panel: panel supply power not found, using dummy regulator [ 5.525722] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.534305] sd 0:0:0:0: [sda] Write Protect is off [ 5.539129] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.545337] sd 0:0:0:0: [sda] No Caching mode page found [ 5.550679] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.579469] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.592156] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 5.679819] PM: suspend entry (deep) [ 5.683388] PM: Syncing filesystems ... done. [ 5.689454] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.697564] OOM killer disabled. [ 5.700818] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.709448] Suspending console(s) (use no_console_suspend to debug) [ 5.902002] Disabling non-boot CPUs ... [ 5.938118] IRQ17 no longer affine to CPU1 [ 6.058661] Entering suspend state LP1 [ 6.058688] Enabling non-boot CPUs ... [ 6.059434] CPU1 is up [ 6.060058] CPU2 is up [ 6.060763] CPU3 is up [ 6.101741] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.113854] mmc1: Switching to 3.3V signalling voltage failed [ 7.148653] tegra-sor 54540000.sor: failed to probe output: -517 [ 7.148824] panel-simple panel: panel supply power not found, using dummy regulator [ 7.196362] OOM killer enabled. [ 7.199529] Restarting tasks ... done. [ 7.204125] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.757553] PM: suspend entry (deep) [ 7.761152] PM: Syncing filesystems ... done. [ 7.766835] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.775006] OOM killer disabled. [ 7.778242] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.786842] Suspending console(s) (use no_console_suspend to debug) [ 7.971701] Disabling non-boot CPUs ... [ 8.148045] IRQ17 no longer affine to CPU3 [ 8.148569] Entering suspend state LP1 [ 8.148594] Enabling non-boot CPUs ... [ 8.149380] CPU1 is up [ 8.150021] CPU2 is up [ 8.150738] CPU3 is up [ 8.202037] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.214527] mmc1: Switching to 3.3V signalling voltage failed [ 8.428392] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.741285] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.741455] panel-simple panel: panel supply power not found, using dummy regulator [ 8.795781] OOM killer enabled. [ 8.798916] Restarting tasks ... done. [ 8.803125] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 9.847099] PM: suspend entry (deep) [ 9.850686] PM: Syncing filesystems ... done. [ 9.856334] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.864524] OOM killer disabled. [ 9.867740] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.876347] Suspending console(s) (use no_console_suspend to debug) [ 10.061376] Disabling non-boot CPUs ... [ 10.208560] Entering suspend state LP1 [ 10.208585] Enabling non-boot CPUs ... [ 10.209375] CPU1 is up [ 10.210029] CPU2 is up [ 10.210746] CPU3 is up [ 10.252001] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.264215] mmc1: Switching to 3.3V signalling voltage failed [ 10.478369] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.792151] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.792320] panel-simple panel: panel supply power not found, using dummy regulator [ 10.842649] OOM killer enabled. [ 10.845787] Restarting tasks ... done. [ 10.850333] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 11.907334] PM: suspend entry (deep) [ 11.910936] PM: Syncing filesystems ... done. [ 11.916621] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.924810] OOM killer disabled. [ 11.928035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.936638] Suspending console(s) (use no_console_suspend to debug) [ 12.121574] Disabling non-boot CPUs ... [ 12.288513] Entering suspend state LP1 [ 12.288538] Enabling non-boot CPUs ... [ 12.289316] CPU1 is up [ 12.289967] CPU2 is up [ 12.290687] CPU3 is up [ 12.341878] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.354112] mmc1: Switching to 3.3V signalling voltage failed [ 12.880826] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.880998] panel-simple panel: panel supply power not found, using dummy regulator [ 12.924368] OOM killer enabled. [ 12.927497] Restarting tasks ... done. [ 12.931782] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 13.987583] PM: suspend entry (deep) [ 13.991173] PM: Syncing filesystems ... done. [ 13.996817] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.004991] OOM killer disabled. [ 14.008229] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.016831] Suspending console(s) (use no_console_suspend to debug) [ 14.201439] Disabling non-boot CPUs ... [ 14.367970] IRQ17 no longer affine to CPU3 [ 14.368507] Entering suspend state LP1 [ 14.368532] Enabling non-boot CPUs ... [ 14.369306] CPU1 is up [ 14.369971] CPU2 is up [ 14.370688] CPU3 is up [ 14.421837] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.434155] mmc1: Switching to 3.3V signalling voltage failed [ 14.648326] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.458568] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.458739] panel-simple panel: panel supply power not found, using dummy regulator [ 15.513186] OOM killer enabled. [ 15.516325] Restarting tasks ... done. [ 15.520611] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 16.067699] PM: suspend entry (deep) [ 16.071292] PM: Syncing filesystems ... done. [ 16.076820] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.084970] OOM killer disabled. [ 16.088207] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.096801] Suspending console(s) (use no_console_suspend to debug) [ 16.281807] Disabling non-boot CPUs ... [ 16.407975] IRQ17 no longer affine to CPU2 [ 16.468462] Entering suspend state LP1 [ 16.468487] Enabling non-boot CPUs ... [ 16.469266] CPU1 is up [ 16.469916] CPU2 is up [ 16.470638] CPU3 is up [ 16.522089] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.534511] mmc1: Switching to 3.3V signalling voltage failed [ 17.063087] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.063258] panel-simple panel: panel supply power not found, using dummy regulator [ 17.110736] OOM killer enabled. [ 17.113865] Restarting tasks ... done. [ 17.118100] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 18.167708] PM: suspend entry (deep) [ 18.171300] PM: Syncing filesystems ... done. [ 18.176984] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.185055] OOM killer disabled. [ 18.188287] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.196864] Suspending console(s) (use no_console_suspend to debug) [ 18.381248] Disabling non-boot CPUs ... [ 18.437970] IRQ17 no longer affine to CPU1 [ 18.558483] Entering suspend state LP1 [ 18.558508] Enabling non-boot CPUs ... [ 18.559288] CPU1 is up [ 18.559948] CPU2 is up [ 18.560669] CPU3 is up [ 18.611764] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.624035] mmc1: Switching to 3.3V signalling voltage failed [ 19.155911] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.156080] panel-simple panel: panel supply power not found, using dummy regulator [ 19.203620] OOM killer enabled. [ 19.206760] Restarting tasks ... done. [ 19.211237] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 20.257708] PM: suspend entry (deep) [ 20.261309] PM: Syncing filesystems ... done. [ 20.266832] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.274995] OOM killer disabled. [ 20.278231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.286818] Suspending console(s) (use no_console_suspend to debug) [ 20.471751] Disabling non-boot CPUs ... [ 20.648421] Entering suspend state LP1 [ 20.648446] Enabling non-boot CPUs ... [ 20.649232] CPU1 is up [ 20.649883] CPU2 is up [ 20.650605] CPU3 is up [ 20.701695] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.713984] mmc1: Switching to 3.3V signalling voltage failed [ 20.928248] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.242259] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.242434] panel-simple panel: panel supply power not found, using dummy regulator [ 21.292672] OOM killer enabled. [ 21.295813] Restarting tasks ... done. [ 21.300090] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 22.347831] PM: suspend entry (deep) [ 22.351401] PM: Syncing filesystems ... done. [ 22.357159] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.365336] OOM killer disabled. [ 22.368571] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.377158] Suspending console(s) (use no_console_suspend to debug) [ 22.561810] Disabling non-boot CPUs ... [ 22.738442] Entering suspend state LP1 [ 22.738467] Enabling non-boot CPUs ... [ 22.739252] CPU1 is up [ 22.739916] CPU2 is up [ 22.740629] CPU3 is up [ 22.791664] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.804288] mmc1: Switching to 3.3V signalling voltage failed [ 23.332733] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.332905] panel-simple panel: panel supply power not found, using dummy regulator [ 23.376320] OOM killer enabled. [ 23.379480] Restarting tasks ... done. [ 23.383753] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 24.436540] PM: suspend entry (deep) [ 24.440129] PM: Syncing filesystems ... done. [ 24.445752] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.453922] OOM killer disabled. [ 24.457138] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.465735] Suspending console(s) (use no_console_suspend to debug) [ 24.651427] Disabling non-boot CPUs ... [ 24.767877] IRQ17 no longer affine to CPU2 [ 24.828352] Entering suspend state LP1 [ 24.828378] Enabling non-boot CPUs ... [ 24.829157] CPU1 is up [ 24.829821] CPU2 is up [ 24.830544] CPU3 is up [ 24.881752] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.894308] mmc1: Switching to 3.3V signalling voltage failed [ 25.422908] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.423079] panel-simple panel: panel supply power not found, using dummy regulator [ 25.470541] OOM killer enabled. [ 25.473671] Restarting tasks ... done. [ 25.477913] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE