U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 3.7 MiB/s done Bytes transferred = 8167936 (7ca200 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7ca200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180206-349159-g417c85c22818 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Feb 6 03:32:52 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632 [ 0.000000] pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1992472K/2096128K available (11264K kernel code, 1570K rwdata, 4352K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1571 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000028] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.005547] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.005566] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005586] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005601] Switching to timer-based delay loop, resolution 83ns [ 0.006084] Console: colour dummy device 80x30 [ 0.006119] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006139] pid_max: default: 32768 minimum: 301 [ 0.006256] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006272] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006770] CPU: Testing write buffer coherency: ok [ 0.007034] /cpus/cpu@0 missing clock-frequency property [ 0.007079] /cpus/cpu@1 missing clock-frequency property [ 0.007124] /cpus/cpu@2 missing clock-frequency property [ 0.007170] /cpus/cpu@3 missing clock-frequency property [ 0.007184] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007483] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.009491] Hierarchical SRCU implementation. [ 0.012611] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.013482] EFI services will not be available. [ 0.013645] smp: Bringing up secondary CPUs ... [ 0.014137] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015983] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.026007] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035546] smp: Brought up 1 node, 4 CPUs [ 0.035570] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035579] CPU: All CPU(s) started in SVC mode. [ 0.037095] devtmpfs: initialized [ 0.051799] Built 1 zonelists, mobility grouping on. Total pages: 514502 [ 0.052173] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.052610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.052630] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.052821] pinctrl core: initialized pinctrl subsystem [ 0.054349] DMI not present or invalid. [ 0.054597] NET: Registered protocol family 16 [ 0.056639] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059192] cpuidle: using governor menu [ 0.084547] No ATAGs? [ 0.084673] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.084690] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.092369] Serial: AMBA PL011 UART driver [ 0.093815] iommu: Adding device 50000000.host1x to group 0 [ 0.093896] iommu: Adding device 54200000.dc to group 1 [ 0.093956] iommu: Adding device 54240000.dc to group 1 [ 0.094031] iommu: Adding device 57000000.gpu to group 2 [ 0.109202] AT91: Could not find identification node [ 0.109764] +5V_SYS: supplied by +VDD_MUX [ 0.110050] +3.3V_SYS: supplied by +VDD_MUX [ 0.110661] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.110677] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.110777] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.110792] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.110975] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.110989] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111084] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111098] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111193] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111207] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111301] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111314] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.114329] vgaarb: loaded [ 0.115072] SCSI subsystem initialized [ 0.115252] libata version 3.00 loaded. [ 0.115448] usbcore: registered new interface driver usbfs [ 0.115503] usbcore: registered new interface driver hub [ 0.115566] usbcore: registered new device driver usb [ 0.119067] pps_core: LinuxPPS API ver. 1 registered [ 0.119079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119101] PTP clock support registered [ 0.119293] EDAC MC: Ver: 3.0.0 [ 0.122318] clocksource: Switched to clocksource arch_sys_counter [ 0.174497] NET: Registered protocol family 2 [ 0.174999] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.175032] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.175131] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.175319] TCP: Hash tables configured (established 8192 bind 8192) [ 0.175401] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.175454] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.175604] NET: Registered protocol family 1 [ 0.175919] RPC: Registered named UNIX socket transport module. [ 0.175931] RPC: Registered udp transport module. [ 0.175940] RPC: Registered tcp transport module. [ 0.175949] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.175962] PCI: CLS 0 bytes, default 64 [ 0.177436] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.178950] Initialise system trusted keyrings [ 0.179081] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.185841] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.186425] NFS: Registering the id_resolver key type [ 0.186447] Key type id_resolver registered [ 0.186457] Key type id_legacy registered [ 0.186501] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.188014] Key type asymmetric registered [ 0.188027] Asymmetric key parser 'x509' registered [ 0.188079] bounce: pool size: 64 pages [ 0.188128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.188140] io scheduler noop registered [ 0.188150] io scheduler deadline registered [ 0.188376] io scheduler cfq registered (default) [ 0.188388] io scheduler mq-deadline registered [ 0.188397] io scheduler kyber registered [ 0.192535] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 0.192646] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 0.193042] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.212169] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 0.212230] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 0.219029] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.225569] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.228967] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.277973] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.280511] console [ttyS0] disabled [ 0.280552] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.217651] console [ttyS0] enabled [ 1.222035] SuperH (H)SCI(F) driver initialized [ 1.227696] msm_serial: driver initialized [ 1.231980] STMicroelectronics ASC driver initialized [ 1.237739] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.247005] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.261693] Failed to attached device 54200000.dc to IOMMU_mapping [ 1.276114] Failed to attached device 54240000.dc to IOMMU_mapping [ 1.291019] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.308245] brd: module loaded [ 1.317673] loop: module loaded [ 1.322101] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.330447] as3722 4-0040: AS3722 with revision 0x1 found [ 1.341965] as3722-sd2: supplied by +5V_SYS [ 1.346583] as3722-sd3: supplied by +5V_SYS [ 1.350966] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.357392] as3722-sd4: supplied by +5V_SYS [ 1.361974] as3722-sd5: supplied by +5V_SYS [ 1.367919] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.373927] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.380111] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.385976] as3722-ldo3: supplied by +3.3V_SYS [ 1.390452] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.398219] as3722-ldo4: supplied by +3.3V_SYS [ 1.402896] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.409075] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.413917] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.420789] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.426462] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.432656] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.445202] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.467551] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.475039] libphy: Fixed MDIO Bus: probed [ 1.480109] CAN device driver interface [ 1.484917] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.491982] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.497827] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.503796] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.510746] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.520378] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.527825] usbcore: registered new interface driver pegasus [ 1.533534] usbcore: registered new interface driver asix [ 1.538954] usbcore: registered new interface driver ax88179_178a [ 1.545083] usbcore: registered new interface driver cdc_ether [ 1.550949] usbcore: registered new interface driver smsc75xx [ 1.556753] usbcore: registered new interface driver smsc95xx [ 1.562540] usbcore: registered new interface driver net1080 [ 1.568220] usbcore: registered new interface driver cdc_subset [ 1.574179] usbcore: registered new interface driver zaurus [ 1.579787] usbcore: registered new interface driver cdc_ncm [ 1.585693] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.591284] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.598763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.605300] ehci-pci: EHCI PCI platform driver [ 1.609781] ehci-platform: EHCI generic platform driver [ 1.615236] ehci-orion: EHCI orion driver [ 1.619403] SPEAr-ehci: EHCI SPEAr driver [ 1.623564] ehci-st: EHCI STMicroelectronics driver [ 1.628576] ehci-exynos: EHCI EXYNOS driver [ 1.632934] ehci-atmel: EHCI Atmel driver [ 1.637075] tegra-ehci: Tegra EHCI driver [ 1.643930] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.649342] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.657095] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.692343] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.698908] hub 1-0:1.0: USB hub found [ 1.702721] hub 1-0:1.0: 1 port detected [ 1.707200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.713406] ohci-pci: OHCI PCI platform driver [ 1.717880] ohci-platform: OHCI generic platform driver [ 1.723316] SPEAr-ohci: OHCI SPEAr driver [ 1.727468] ohci-st: OHCI STMicroelectronics driver [ 1.732503] ohci-atmel: OHCI Atmel driver [ 1.737301] usbcore: registered new interface driver usb-storage [ 1.752248] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.759152] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.767543] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.774740] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.781472] i2c /dev entries driver [ 1.792039] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.809771] sdhci: Secure Digital Host Controller Interface driver [ 1.815971] sdhci: Copyright(c) Pierre Ossman [ 1.822106] Synopsys Designware Multimedia Card Interface Driver [ 1.829673] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.836165] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.841056] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.862348] mmc0: Unknown controller version (3). You may experience problems. [ 1.869608] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.906577] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.916171] ledtrig-cpu: registered to indicate activity on CPUs [ 1.922490] usbcore: registered new interface driver usbhid [ 1.928054] usbhid: USB HID core driver [ 1.936125] NET: Registered protocol family 10 [ 1.941418] Segment Routing with IPv6 [ 1.945188] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.951618] NET: Registered protocol family 17 [ 1.956096] can: controller area network core (rev 20170425 abi 9) [ 1.962346] NET: Registered protocol family 29 [ 1.966786] can: raw protocol (rev 20170425) [ 1.971050] can: broadcast manager protocol (rev 20170425 t) [ 1.976726] can: netlink gateway (rev 20170425) max_hops=1 [ 1.982507] Key type dns_resolver registered [ 1.987287] ThumbEE CPU extension supported. [ 1.991561] Registering SWP/SWPB emulation handler [ 1.996964] Loading compiled-in X.509 certificates [ 2.015553] +3.3V_RUN: supplied by +3.3V_SYS [ 2.021357] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.026054] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.032153] +5V_USB_HS: supplied by +5V_SYS [ 2.038019] +3.3V_LP0: supplied by +3.3V_SYS [ 2.044458] +5V_HDMI_CON: supplied by +5V_SYS [ 2.049324] +5V_SATA: supplied by +5V_SYS [ 2.053891] +12V_SATA: supplied by +VDD_MUX [ 2.059397] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.066218] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.073272] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.081455] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.087133] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.096976] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.107834] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.119079] as3722-sd2: supplied by +5V_SYS [ 2.123670] as3722-sd3: supplied by +5V_SYS [ 2.128070] as3722-sd4: supplied by +5V_SYS [ 2.132523] as3722-sd5: supplied by +5V_SYS [ 2.138732] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.144766] as3722-ldo1: supplied by +3.3V_RUN [ 2.149512] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.155201] as3722-ldo3: supplied by +3.3V_SYS [ 2.160640] as3722-ldo4: supplied by +3.3V_SYS [ 2.165503] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.170445] as3722-ldo6: supplied by +3.3V_RUN [ 2.175196] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.180672] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.187786] as3722-ldo9: supplied by +5V_SYS [ 2.193483] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.200296] as3722-ldo10: supplied by +5V_SYS [ 2.205611] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.212609] as3722-ldo11: supplied by +3.3V_RUN [ 2.218104] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.227419] mmc0: new high speed MMC card at address 0001 [ 2.233541] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.238473] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.244888] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.251038] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0) [ 2.258785] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.267885] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.278982] scsi host0: tegra-ahci [ 2.283083] scsi host1: tegra-ahci [ 2.286740] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.294775] ata2: DUMMY [ 2.300829] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.306273] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.313970] mmcblk0: p1 [ 2.317629] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.352451] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.359388] hub 2-0:1.0: USB hub found [ 2.363245] hub 2-0:1.0: 1 port detected [ 2.369738] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.374700] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.386749] mmc1: Unknown controller version (3). You may experience problems. [ 2.394105] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.432448] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.440625] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.448461] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.456162] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.481963] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.490304] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.505140] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.511409] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.517642] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.524561] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.531874] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.537441] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.543495] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.553195] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.562926] pci 0000:00:01.0: enabling Extended Tags [ 2.567905] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.577714] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.587524] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.594190] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.604236] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.610260] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.619949] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.625938] ata1: SATA link down (SStatus 0 SControl 300) [ 2.629665] pci 0000:00:02.0: enabling Extended Tags [ 2.639975] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.649778] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.659592] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.666222] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.676257] PCI: bus0: Fast back to back transfers disabled [ 2.681837] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.689885] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.698089] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.704179] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.711183] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.732357] mmc1: new high speed SDHC card at address aaaa [ 2.738458] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.743201] PCI: bus1: Fast back to back transfers disabled [ 2.748798] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.755645] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.761697] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.767320] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.774141] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.781521] pci 0000:02:00.0: supports D1 D2 [ 2.785807] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.803993] mmcblk1: p1 p2 p3 [ 2.822480] PCI: bus2: Fast back to back transfers disabled [ 2.828060] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.834775] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.841575] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.848413] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.856190] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.862287] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.869631] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.874637] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.881436] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.889209] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.896572] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.902686] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.907647] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.913780] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.920563] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.928350] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.935487] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.941827] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 2.947733] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.954869] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.961208] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 2.967321] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.972962] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.003927] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x12935cd8, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.013603] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.026199] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.034580] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.041196] [drm] No driver support for vblank timestamp query. [ 3.175889] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.339682] Console: switching to colour frame buffer device 512x135 [ 3.438361] drm drm: fb0: frame buffer device [ 3.442953] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.450849] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.458194] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.467425] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.474782] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815) [ 3.483761] +USB0_VBUS_SW: disabling [ 3.487339] +1.8V_RUN_CAM: disabling [ 3.491169] +2.8V_RUN_CAM: disabling [ 3.494999] +1.2V_RUN_CAM_FRONT: disabling [ 3.499248] +1.05V_RUN_CAM_REAR: disabling [ 3.503587] +3.3V_RUN_TOUCH: disabling [ 3.507488] +2.8V_RUN_CAM_AF: disabling [ 3.511470] +1.8V_RUN_VPP_FUSE: disabling [ 3.516586] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.573015] EXT4-fs (mmcblk0p1): recovery complete [ 3.578751] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.586901] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.597353] devtmpfs: mounted [ 3.601165] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#