U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 3.3 MiB/s done Bytes transferred = 6386656 (6173e0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.1 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6173e0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180205-230825-ga352043 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Feb 6 03:15:57 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008021] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017553] Switching to timer-based delay loop, resolution 1000ns [ 0.024092] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029774] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040520] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048491] Switching to timer-based delay loop, resolution 83ns [ 0.054664] Console: colour dummy device 80x30 [ 0.058899] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080391] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087727] CPU: Testing write buffer coherency: ok [ 0.092405] /cpus/cpu@0 missing clock-frequency property [ 0.097554] /cpus/cpu@1 missing clock-frequency property [ 0.102851] /cpus/cpu@2 missing clock-frequency property [ 0.108129] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153454] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158108] Hierarchical SRCU implementation. [ 0.173677] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193459] smp: Bringing up secondary CPUs ... [ 0.243756] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323784] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403824] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413601] smp: Brought up 1 node, 4 CPUs [ 0.432685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438837] CPU: All CPU(s) started in SVC mode. [ 0.444124] devtmpfs: initialized [ 0.453682] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458724] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466354] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475972] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482263] pinctrl core: initialized pinctrl subsystem [ 0.487793] NET: Registered protocol family 16 [ 0.492188] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499104] cpuidle: using governor menu [ 0.510079] No ATAGs? [ 0.510139] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518480] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525162] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532842] iommu: Adding device 50000000.host1x to group 0 [ 0.538255] iommu: Adding device 54200000.dc to group 1 [ 0.543457] iommu: Adding device 54240000.dc to group 1 [ 0.548656] iommu: Adding device 57000000.gpu to group 2 [ 0.559766] +5V_SYS: supplied by +VDD_MUX [ 0.561994] +3.3V_SYS: supplied by +VDD_MUX [ 0.566324] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571652] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579755] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585692] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593808] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599558] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607663] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613425] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621590] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628418] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636610] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642458] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651045] vgaarb: loaded [ 0.653558] SCSI subsystem initialized [ 0.657114] libata version 3.00 loaded. [ 0.660958] usbcore: registered new interface driver usbfs [ 0.666316] usbcore: registered new interface driver hub [ 0.671624] usbcore: registered new device driver usb [ 0.677835] Linux video capture interface: v2.00 [ 0.681225] pps_core: LinuxPPS API ver. 1 registered [ 0.686148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695250] PTP clock support registered [ 0.699289] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706510] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712677] Advanced Linux Sound Architecture Driver Initialized. [ 0.718891] Bluetooth: Core ver 2.22 [ 0.722209] NET: Registered protocol family 31 [ 0.726619] Bluetooth: HCI device and connection manager initialized [ 0.732940] Bluetooth: HCI socket layer initialized [ 0.737798] Bluetooth: L2CAP socket layer initialized [ 0.742833] Bluetooth: SCO socket layer initialized [ 0.747922] clocksource: Switched to clocksource arch_sys_counter [ 0.785966] NET: Registered protocol family 2 [ 0.788791] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.796054] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.803099] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809532] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815967] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821708] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.828140] NET: Registered protocol family 1 [ 0.832627] RPC: Registered named UNIX socket transport module. [ 0.838249] RPC: Registered udp transport module. [ 0.842919] RPC: Registered tcp transport module. [ 0.847598] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864264] PCI: CLS 0 bytes, default 64 [ 0.866958] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.875070] Initialise system trusted keyrings [ 0.878919] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885738] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891383] NFS: Registering the id_resolver key type [ 0.896086] Key type id_resolver registered [ 0.900252] Key type id_legacy registered [ 0.905995] Key type asymmetric registered [ 0.908310] Asymmetric key parser 'x509' registered [ 0.913204] bounce: pool size: 64 pages [ 0.916992] io scheduler noop registered (default) [ 0.921741] io scheduler mq-deadline registered [ 0.926241] io scheduler kyber registered [ 0.930880] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943292] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949383] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958181] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964963] console [ttyS0] disabled [ 0.967849] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976787] console [ttyS0] enabled [ 0.976787] console [ttyS0] enabled [ 0.983008] bootconsole [earlycon0] disabled [ 0.983008] bootconsole [earlycon0] disabled [ 1.009129] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015604] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.023117] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034518] loop: module loaded [ 1.038245] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048306] as3722-sd2: supplied by +5V_SYS [ 1.052731] as3722-sd3: supplied by +5V_SYS [ 1.057068] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063253] as3722-sd4: supplied by +5V_SYS [ 1.067588] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073347] as3722-sd5: supplied by +5V_SYS [ 1.078963] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084705] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090733] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096360] as3722-ldo3: supplied by +3.3V_SYS [ 1.100819] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108400] as3722-ldo4: supplied by +3.3V_SYS [ 1.112997] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119025] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123801] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130496] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136531] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141310] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147863] as3722-ldo9: supplied by +5V_SYS [ 1.152441] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158653] as3722-ldo10: supplied by +5V_SYS [ 1.163164] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169617] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192058] cros-ec-spi spi0.0: Chrome EC device registered [ 1.206882] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.212399] libphy: Fixed MDIO Bus: probed [ 1.216484] CAN device driver interface [ 1.220337] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227280] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.232893] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240326] usbcore: registered new interface driver pegasus [ 1.245992] usbcore: registered new interface driver asix [ 1.251401] usbcore: registered new interface driver ax88179_178a [ 1.257499] usbcore: registered new interface driver cdc_ether [ 1.263351] usbcore: registered new interface driver smsc75xx [ 1.269112] usbcore: registered new interface driver smsc95xx [ 1.274860] usbcore: registered new interface driver net1080 [ 1.280530] usbcore: registered new interface driver cdc_subset [ 1.286453] usbcore: registered new interface driver zaurus [ 1.292041] usbcore: registered new interface driver cdc_ncm [ 1.297773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304291] ehci-pci: EHCI PCI platform driver [ 1.308749] tegra-ehci: Tegra EHCI driver [ 1.313014] usbcore: registered new interface driver cdc_acm [ 1.318665] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.326668] usbcore: registered new interface driver cdc_wdm [ 1.332343] usbcore: registered new interface driver usb-storage [ 1.339002] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.358621] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.365479] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.372242] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.379388] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.385665] i2c /dev entries driver [ 1.389581] usbcore: registered new interface driver uvcvideo [ 1.395311] USB Video Class driver (1.1.1) [ 1.399404] gspca_main: v2.14.0 registered [ 1.403717] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.412381] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.420723] sdhci: Secure Digital Host Controller Interface driver [ 1.426887] sdhci: Copyright(c) Pierre Ossman [ 1.431244] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.437019] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.450822] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.455693] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.476056] mmc0: Unknown controller version (3). You may experience problems. [ 1.483296] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.520070] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527779] usbcore: registered new interface driver usbhid [ 1.533456] usbhid: USB HID core driver [ 1.539566] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587815] mmc0: new high speed MMC card at address 0001 [ 1.593735] max98090 0-0010: MAX98090 REVID=0x43 [ 1.595159] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604517] max98090 0-0010: use default 2.8v micbias [ 1.604722] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.617336] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.623376] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623554] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.638585] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.640162] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.646564] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.660536] NET: Registered protocol family 10 [ 1.665567] Segment Routing with IPv6 [ 1.669296] mip6: Mobile IPv6 [ 1.672255] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678709] NET: Registered protocol family 17 [ 1.683145] NET: Registered protocol family 15 [ 1.687577] can: controller area network core (rev 20170425 abi 9) [ 1.693823] NET: Registered protocol family 29 [ 1.698262] can: raw protocol (rev 20170425) [ 1.702519] can: broadcast manager protocol (rev 20170425 t) [ 1.708173] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713715] Bluetooth: RFCOMM socket layer initialized [ 1.718855] Bluetooth: RFCOMM ver 1.11 [ 1.722596] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727895] Bluetooth: BNEP socket layer initialized [ 1.732851] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738772] Bluetooth: HIDP socket layer initialized [ 1.743813] Key type dns_resolver registered [ 1.748275] Registering SWP/SWPB emulation handler [ 1.753316] Loading compiled-in X.509 certificates [ 1.775455] +3.3V_RUN: supplied by +3.3V_SYS [ 1.780440] +VDD_LED: supplied by +VDD_MUX [ 1.784634] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.790331] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.795037] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.799709] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.804881] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.809540] +5V_USB_HS: supplied by +5V_SYS [ 1.814056] +5V_USB_SS: supplied by +5V_SYS [ 1.819528] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.824817] +3.3V_LP0: supplied by +3.3V_SYS [ 1.829876] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.835708] +5V_HDMI_CON: supplied by +5V_SYS [ 1.840695] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.847427] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.860571] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.866797] panel-simple panel: panel supply power not found, using dummy regulator [ 1.938685] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.946082] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.951508] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.961019] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.969673] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.976070] hub 1-0:1.0: USB hub found [ 1.979856] hub 1-0:1.0: 6 ports detected [ 1.984196] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.989595] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.997258] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.005746] hub 2-0:1.0: USB hub found [ 2.009516] hub 2-0:1.0: 2 ports detected [ 2.014495] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.028187] mmc1: Unknown controller version (3). You may experience problems. [ 2.035449] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.041927] mmc1: Switching to 3.3V signalling voltage failed [ 2.070691] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.078345] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.083216] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.093504] mmc2: Unknown controller version (3). You may experience problems. [ 2.100843] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.136616] mmc1: new high speed SDIO card at address 0001 [ 2.142442] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.150026] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.156189] panel-simple panel: panel supply power not found, using dummy regulator [ 2.164305] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.170944] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.177170] panel-simple panel: panel supply power not found, using dummy regulator [ 2.184836] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.193720] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.203515] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.210278] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.211786] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.218964] cfg80211: failed to load regulatory.db [ 2.223466] +1.8V_RUN_CAM: disabling [ 2.232072] +1.2V_RUN_CAM_FRONT: disabling [ 2.236384] +1.05V_RUN_CAM_REAR: disabling [ 2.240788] +2.8V_RUN_TOUCH: disabling [ 2.244804] +2.8V_RUN_CAM_AF: disabling [ 2.248940] +1.8V_RUN_VPP_FUSE: disabling [ 2.253215] +VDD_LED: disabling [ 2.256397] +5V_VDD_TS_SW: disabling [ 2.260047] +3.3V_PANEL: disabling [ 2.263519] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.268078] +5V_HDMI_CON: disabling [ 2.271587] ALSA device list: [ 2.274602] #1: GoogleNyanBig [ 2.308428] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.316882] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.316984] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.331563] panel-simple panel: panel supply power not found, using dummy regulator [ 2.357960] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.364923] EXT4-fs (mmcblk0p3): recovery complete [ 2.369814] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.378081] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.385308] devtmpfs: mounted [ 2.388744] Freeing unused kernel memory: 1024K [ 2.403243] mmc2: new high speed SDHC card at address 0007 [ 2.410693] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.423957] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.430139] GPT:3014591 != 15564799 [ 2.433615] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.440998] GPT:3014591 != 15564799 [ 2.444476] GPT: Use GNU Parted to correct GPT errors. [ 2.449632] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.456682] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.462914] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.627045] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.632387] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.637689] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.642998] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.648307] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.653609] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.658918] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.664221] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.669554] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.674857] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.754204] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.769045] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.778536] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.784699] panel-simple panel: panel supply power not found, using dummy regulator [ 3.128012] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.802765] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.813803] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.819981] panel-simple panel: panel supply power not found, using dummy regulator [ 4.158013] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.346128] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.352818] scsi host0: usb-storage 1-1:1.0 [ 4.357425] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.363692] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399678] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408380] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414549] panel-simple panel: panel supply power not found, using dummy regulator [ 5.605773] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.614372] sd 0:0:0:0: [sda] Write Protect is off [ 5.619194] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 rtcwake -d rtc1 -m mem -s 3 [ 5.625948] sd 0:0:0:0: [sda] No Caching mode page found [ 5.632135] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.656736] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 rtcwake: assuming RTC uses UTC ... [ 5.669734] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.704586] PM: suspend entry (deep) [ 5.708221] PM: Syncing filesystems ... done. [ 5.714083] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.722240] OOM killer disabled. [ 5.725458] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.734050] Suspending console(s) (use no_console_suspend to debug) [ 5.922072] Disabling non-boot CPUs ... [ 5.978113] IRQ17 no longer affine to CPU1 [ 6.098699] Entering suspend state LP1 [ 6.098724] Enabling non-boot CPUs ... [ 6.099457] CPU1 is up [ 6.100096] CPU2 is up [ 6.100801] CPU3 is up [ 6.141733] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.153885] mmc1: Switching to 3.3V signalling voltage failed [ 6.681168] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.681341] panel-simple panel: panel supply power not found, using dummy regulator [ 6.728924] OOM killer enabled. [ 6.732066] Restarting tasks ... done. [ 6.736566] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 8.017490] PM: suspend entry (deep) [ 8.021078] PM: Syncing filesystems ... done. [ 8.026623] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.034815] OOM killer disabled. [ 8.038036] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.046643] Suspending console(s) (use no_console_suspend to debug) [ 8.231453] Disabling non-boot CPUs ... [ 8.398576] Entering suspend state LP1 [ 8.398601] Enabling non-boot CPUs ... [ 8.399372] CPU1 is up [ 8.400015] CPU2 is up [ 8.400726] CPU3 is up [ 8.451903] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.464194] mmc1: Switching to 3.3V signalling voltage failed [ 9.001379] tegra-sor 54540000.sor: failed to probe output: -517 [ 9.001550] panel-simple panel: panel supply power not found, using dummy regulator [ 9.044918] OOM killer enabled. [ 9.048059] Restarting tasks ... done. [ 9.052327] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 10.317655] PM: suspend entry (deep) [ 10.321254] PM: Syncing filesystems ... done. [ 10.326939] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.335112] OOM killer disabled. [ 10.338349] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.346958] Suspending console(s) (use no_console_suspend to debug) [ 10.531849] Disabling non-boot CPUs ... [ 10.688548] Entering suspend state LP1 [ 10.688574] Enabling non-boot CPUs ... [ 10.689348] CPU1 is up [ 10.690006] CPU2 is up [ 10.690721] CPU3 is up [ 10.742443] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.754548] mmc1: Switching to 3.3V signalling voltage failed [ 11.281672] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.281846] panel-simple panel: panel supply power not found, using dummy regulator [ 11.325267] OOM killer enabled. [ 11.328427] Restarting tasks ... done. [ 11.332808] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.607744] PM: suspend entry (deep) [ 12.611343] PM: Syncing filesystems ... done. [ 12.617098] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.625271] OOM killer disabled. [ 12.628507] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.637108] Suspending console(s) (use no_console_suspend to debug) [ 12.821835] Disabling non-boot CPUs ... [ 12.978532] Entering suspend state LP1 [ 12.978557] Enabling non-boot CPUs ... [ 12.979343] CPU1 is up [ 12.980000] CPU2 is up [ 12.980723] CPU3 is up [ 13.031875] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.044094] mmc1: Switching to 3.3V signalling voltage failed [ 13.577564] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.577736] panel-simple panel: panel supply power not found, using dummy regulator [ 13.621282] OOM killer enabled. [ 13.624411] Restarting tasks ... done. [ 13.628912] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.897282] PM: suspend entry (deep) [ 14.900874] PM: Syncing filesystems ... done. [ 14.906551] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.914732] OOM killer disabled. [ 14.917953] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.926555] Suspending console(s) (use no_console_suspend to debug) [ 15.111377] Disabling non-boot CPUs ... [ 15.288598] Entering suspend state LP1 [ 15.288624] Enabling non-boot CPUs ... [ 15.289399] CPU1 is up [ 15.290063] CPU2 is up [ 15.290778] CPU3 is up [ 15.341850] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.354047] mmc1: Switching to 3.3V signalling voltage failed [ 15.881858] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.882029] panel-simple panel: panel supply power not found, using dummy regulator [ 15.925404] OOM killer enabled. [ 15.928545] Restarting tasks ... done. [ 15.932766] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 17.206249] PM: suspend entry (deep) [ 17.209835] PM: Syncing filesystems ... done. [ 17.215212] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.223398] OOM killer disabled. [ 17.226614] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.235236] Suspending console(s) (use no_console_suspend to debug) [ 17.421684] Disabling non-boot CPUs ... [ 17.568462] Entering suspend state LP1 [ 17.568487] Enabling non-boot CPUs ... [ 17.569266] CPU1 is up [ 17.569929] CPU2 is up [ 17.570641] CPU3 is up [ 17.621733] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.634109] mmc1: Switching to 3.3V signalling voltage failed [ 18.161266] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.161439] panel-simple panel: panel supply power not found, using dummy regulator [ 18.204961] OOM killer enabled. [ 18.208121] Restarting tasks ... done. [ 18.212448] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 19.486564] PM: suspend entry (deep) [ 19.490150] PM: Syncing filesystems ... done. [ 19.495618] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.503800] OOM killer disabled. [ 19.507016] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.515625] Suspending console(s) (use no_console_suspend to debug) [ 19.701380] Disabling non-boot CPUs ... [ 19.777972] IRQ17 no longer affine to CPU1 [ 19.888429] Entering suspend state LP1 [ 19.888454] Enabling non-boot CPUs ... [ 19.889228] CPU1 is up [ 19.889892] CPU2 is up [ 19.890604] CPU3 is up [ 19.941775] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.953710] mmc1: Switching to 3.3V signalling voltage failed [ 20.480890] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.481061] panel-simple panel: panel supply power not found, using dummy regulator [ 20.528634] OOM killer enabled. [ 20.531774] Restarting tasks ... done. [ 20.536192] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 21.807439] PM: suspend entry (deep) [ 21.811025] PM: Syncing filesystems ... done. [ 21.816696] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.824870] OOM killer disabled. [ 21.828107] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.836712] Suspending console(s) (use no_console_suspend to debug) [ 22.021518] Disabling non-boot CPUs ... [ 22.127927] IRQ17 no longer affine to CPU2 [ 22.188465] Entering suspend state LP1 [ 22.188491] Enabling non-boot CPUs ... [ 22.189270] CPU1 is up [ 22.189933] CPU2 is up [ 22.190645] CPU3 is up [ 22.241780] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.253871] mmc1: Switching to 3.3V signalling voltage failed [ 22.468208] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 22.782781] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.782953] panel-simple panel: panel supply power not found, using dummy regulator [ 22.837275] OOM killer enabled. [ 22.840409] Restarting tasks ... done. [ 22.844735] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 24.107073] PM: suspend entry (deep) [ 24.110672] PM: Syncing filesystems ... done. [ 24.116354] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.124547] OOM killer disabled. [ 24.127769] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.136376] Suspending console(s) (use no_console_suspend to debug) [ 24.321337] Disabling non-boot CPUs ... [ 24.377920] IRQ17 no longer affine to CPU1 [ 24.498437] Entering suspend state LP1 [ 24.498462] Enabling non-boot CPUs ... [ 24.499238] CPU1 is up [ 24.499902] CPU2 is up [ 24.500617] CPU3 is up [ 24.551652] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.563712] mmc1: Switching to 3.3V signalling voltage failed [ 25.091893] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.092064] panel-simple panel: panel supply power not found, using dummy regulator [ 25.139534] OOM killer enabled. [ 25.142664] Restarting tasks ... done. [ 25.146907] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 26.415606] PM: suspend entry (deep) [ 26.419188] PM: Syncing filesystems ... done. [ 26.424647] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 26.432734] OOM killer disabled. [ 26.435949] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 26.444563] Suspending console(s) (use no_console_suspend to debug) [ 26.631672] Disabling non-boot CPUs ... [ 26.778365] Entering suspend state LP1 [ 26.778390] Enabling non-boot CPUs ... [ 26.779167] CPU1 is up [ 26.779832] CPU2 is up [ 26.780546] CPU3 is up [ 26.821550] cros-ec-spi spi0.0: spi transfer failed: -121 [ 26.833678] mmc1: Switching to 3.3V signalling voltage failed [ 27.363147] tegra-sor 54540000.sor: failed to probe output: -517 [ 27.363316] panel-simple panel: panel supply power not found, using dummy regulator [ 27.406691] OOM killer enabled. [ 27.409832] Restarting tasks ... done. [ 27.414062] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE