U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 3.3 MiB/s done Bytes transferred = 6386056 (617188 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x617188 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180202-230685-gba07492 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Feb 1 20:49:00 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008015] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017548] Switching to timer-based delay loop, resolution 1000ns [ 0.024080] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029768] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040515] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048486] Switching to timer-based delay loop, resolution 83ns [ 0.054661] Console: colour dummy device 80x30 [ 0.058895] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069204] pid_max: default: 32768 minimum: 301 [ 0.073968] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080385] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087720] CPU: Testing write buffer coherency: ok [ 0.092398] /cpus/cpu@0 missing clock-frequency property [ 0.097549] /cpus/cpu@1 missing clock-frequency property [ 0.102845] /cpus/cpu@2 missing clock-frequency property [ 0.108123] /cpus/cpu@3 missing clock-frequency property [ 0.113405] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153448] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158104] Hierarchical SRCU implementation. [ 0.173670] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193453] smp: Bringing up secondary CPUs ... [ 0.243752] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403819] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413596] smp: Brought up 1 node, 4 CPUs [ 0.432679] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438832] CPU: All CPU(s) started in SVC mode. [ 0.444121] devtmpfs: initialized [ 0.453531] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458574] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475821] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482109] pinctrl core: initialized pinctrl subsystem [ 0.487629] NET: Registered protocol family 16 [ 0.492034] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498947] cpuidle: using governor menu [ 0.509784] No ATAGs? [ 0.509843] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518186] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524876] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532549] iommu: Adding device 50000000.host1x to group 0 [ 0.537960] iommu: Adding device 54200000.dc to group 1 [ 0.543160] iommu: Adding device 54240000.dc to group 1 [ 0.548360] iommu: Adding device 57000000.gpu to group 2 [ 0.559433] +5V_SYS: supplied by +VDD_MUX [ 0.561661] +3.3V_SYS: supplied by +VDD_MUX [ 0.565985] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571319] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579423] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585359] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593474] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599225] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607343] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613092] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621268] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628085] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636283] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642125] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650714] vgaarb: loaded [ 0.653221] SCSI subsystem initialized [ 0.656774] libata version 3.00 loaded. [ 0.660636] usbcore: registered new interface driver usbfs [ 0.665984] usbcore: registered new interface driver hub [ 0.671290] usbcore: registered new device driver usb [ 0.677494] Linux video capture interface: v2.00 [ 0.680892] pps_core: LinuxPPS API ver. 1 registered [ 0.685823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694918] PTP clock support registered [ 0.698957] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706178] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712353] Advanced Linux Sound Architecture Driver Initialized. [ 0.718555] Bluetooth: Core ver 2.22 [ 0.721877] NET: Registered protocol family 31 [ 0.726284] Bluetooth: HCI device and connection manager initialized [ 0.732606] Bluetooth: HCI socket layer initialized [ 0.737465] Bluetooth: L2CAP socket layer initialized [ 0.742500] Bluetooth: SCO socket layer initialized [ 0.747592] clocksource: Switched to clocksource arch_sys_counter [ 0.785845] NET: Registered protocol family 2 [ 0.788677] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795932] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802988] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809412] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815851] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.828022] NET: Registered protocol family 1 [ 0.832502] RPC: Registered named UNIX socket transport module. [ 0.838139] RPC: Registered udp transport module. [ 0.842797] RPC: Registered tcp transport module. [ 0.847478] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864148] PCI: CLS 0 bytes, default 64 [ 0.866847] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.874955] Initialise system trusted keyrings [ 0.878805] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885620] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891244] NFS: Registering the id_resolver key type [ 0.895972] Key type id_resolver registered [ 0.900137] Key type id_legacy registered [ 0.905775] Key type asymmetric registered [ 0.908206] Asymmetric key parser 'x509' registered [ 0.913087] bounce: pool size: 64 pages [ 0.916879] io scheduler noop registered (default) [ 0.921628] io scheduler mq-deadline registered [ 0.926125] io scheduler kyber registered [ 0.930778] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943153] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949258] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964809] console [ttyS0] disabled [ 0.967729] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976635] console [ttyS0] enabled [ 0.976635] console [ttyS0] enabled [ 0.982871] bootconsole [earlycon0] disabled [ 0.982871] bootconsole [earlycon0] disabled [ 1.007850] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.014324] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.021835] panel-simple panel: panel supply power not found, using dummy regulator [ 1.033206] loop: module loaded [ 1.036912] as3722 4-0040: AS3722 with revision 0x1 found [ 1.046995] as3722-sd2: supplied by +5V_SYS [ 1.051433] as3722-sd3: supplied by +5V_SYS [ 1.055769] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.061964] as3722-sd4: supplied by +5V_SYS [ 1.066300] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.072055] as3722-sd5: supplied by +5V_SYS [ 1.077664] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.083406] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.089431] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.095059] as3722-ldo3: supplied by +3.3V_SYS [ 1.099519] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.107095] as3722-ldo4: supplied by +3.3V_SYS [ 1.111701] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.117722] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.122496] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.129191] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.135223] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.140004] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.146555] as3722-ldo9: supplied by +5V_SYS [ 1.151133] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.157335] as3722-ldo10: supplied by +5V_SYS [ 1.161855] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.168305] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.190831] cros-ec-spi spi0.0: Chrome EC device registered [ 1.205773] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.211320] libphy: Fixed MDIO Bus: probed [ 1.215405] CAN device driver interface [ 1.219257] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.226202] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.231815] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.239254] usbcore: registered new interface driver pegasus [ 1.244919] usbcore: registered new interface driver asix [ 1.250328] usbcore: registered new interface driver ax88179_178a [ 1.256425] usbcore: registered new interface driver cdc_ether [ 1.262277] usbcore: registered new interface driver smsc75xx [ 1.268040] usbcore: registered new interface driver smsc95xx [ 1.273787] usbcore: registered new interface driver net1080 [ 1.279458] usbcore: registered new interface driver cdc_subset [ 1.285380] usbcore: registered new interface driver zaurus [ 1.290969] usbcore: registered new interface driver cdc_ncm [ 1.296702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.303220] ehci-pci: EHCI PCI platform driver [ 1.307676] tegra-ehci: Tegra EHCI driver [ 1.311938] usbcore: registered new interface driver cdc_acm [ 1.317581] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.325591] usbcore: registered new interface driver cdc_wdm [ 1.331266] usbcore: registered new interface driver usb-storage [ 1.337929] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.357612] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.364470] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.371230] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.378375] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.384656] i2c /dev entries driver [ 1.388563] usbcore: registered new interface driver uvcvideo [ 1.394293] USB Video Class driver (1.1.1) [ 1.398386] gspca_main: v2.14.0 registered [ 1.402701] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.411359] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.419703] sdhci: Secure Digital Host Controller Interface driver [ 1.425868] sdhci: Copyright(c) Pierre Ossman [ 1.430223] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435996] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.449798] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.454670] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475722] mmc0: Unknown controller version (3). You may experience problems. [ 1.482962] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519735] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527449] usbcore: registered new interface driver usbhid [ 1.533131] usbhid: USB HID core driver [ 1.539236] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587464] mmc0: new high speed MMC card at address 0001 [ 1.593384] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594813] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604166] max98090 0-0010: use default 2.8v micbias [ 1.604381] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.617004] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.623045] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623221] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.637951] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.639837] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.645934] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.659908] NET: Registered protocol family 10 [ 1.664937] Segment Routing with IPv6 [ 1.668665] mip6: Mobile IPv6 [ 1.671624] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678081] NET: Registered protocol family 17 [ 1.682518] NET: Registered protocol family 15 [ 1.686949] can: controller area network core (rev 20170425 abi 9) [ 1.693203] NET: Registered protocol family 29 [ 1.697642] can: raw protocol (rev 20170425) [ 1.701899] can: broadcast manager protocol (rev 20170425 t) [ 1.707545] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713094] Bluetooth: RFCOMM socket layer initialized [ 1.718236] Bluetooth: RFCOMM ver 1.11 [ 1.721978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727277] Bluetooth: BNEP socket layer initialized [ 1.732234] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738145] Bluetooth: HIDP socket layer initialized [ 1.743186] Key type dns_resolver registered [ 1.747651] Registering SWP/SWPB emulation handler [ 1.752683] Loading compiled-in X.509 certificates [ 1.764864] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769865] +VDD_LED: supplied by +VDD_MUX [ 1.774058] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779743] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.784453] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.789194] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.794372] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.799101] +5V_USB_HS: supplied by +5V_SYS [ 1.803422] +5V_USB_SS: supplied by +5V_SYS [ 1.808847] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.814127] +3.3V_LP0: supplied by +3.3V_SYS [ 1.819187] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.825000] +5V_HDMI_CON: supplied by +5V_SYS [ 1.830097] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.836831] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.849974] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.856192] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928327] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935724] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941164] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950690] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959319] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965695] hub 1-0:1.0: USB hub found [ 1.969522] hub 1-0:1.0: 6 ports detected [ 1.973897] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979300] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.986964] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995457] hub 2-0:1.0: USB hub found [ 1.999268] hub 2-0:1.0: 2 ports detected [ 2.004291] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017816] mmc1: Unknown controller version (3). You may experience problems. [ 2.025060] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031537] mmc1: Switching to 3.3V signalling voltage failed [ 2.060337] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.067979] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.072850] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083087] mmc2: Unknown controller version (3). You may experience problems. [ 2.090422] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126108] mmc1: new high speed SDIO card at address 0001 [ 2.131935] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139542] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145700] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153816] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160449] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166675] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174623] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.183425] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193325] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200134] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208017] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.208765] cfg80211: failed to load regulatory.db [ 2.213319] +1.8V_RUN_CAM: disabling [ 2.221866] +1.2V_RUN_CAM_FRONT: disabling [ 2.226128] +1.05V_RUN_CAM_REAR: disabling [ 2.230473] +2.8V_RUN_TOUCH: disabling [ 2.234331] +2.8V_RUN_CAM_AF: disabling [ 2.238677] +1.8V_RUN_VPP_FUSE: disabling [ 2.242853] +VDD_LED: disabling [ 2.246022] +5V_VDD_TS_SW: disabling [ 2.249632] +3.3V_PANEL: disabling [ 2.253026] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.257584] +5V_HDMI_CON: disabling [ 2.261152] ALSA device list: [ 2.264123] #1: GoogleNyanBig [ 2.298100] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.304412] panel-simple panel: panel supply power not found, using dummy regulator [ 2.312562] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.321013] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.337648] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.355046] mmc2: new high speed SDHC card at address 0007 [ 2.362416] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.374975] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.381183] GPT:3014591 != 15564799 [ 2.384662] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.392075] GPT:3014591 != 15564799 [ 2.395561] GPT: Use GNU Parted to correct GPT errors. [ 2.400746] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.407765] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.413988] panel-simple panel: panel supply power not found, using dummy regulator [ 2.562865] EXT4-fs (mmcblk0p3): recovery complete [ 2.567688] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.575788] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.582874] devtmpfs: mounted [ 2.586292] Freeing unused kernel memory: 1024K [ 2.596683] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.602629] alloc_contig_range: [fbc77, fbc78) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device ba[ 2.681475] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) sh: no job control in this shell root@(none):/# [ 2.699086] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.709456] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.715615] panel-simple panel: panel supply power not found, using dummy regulator [ 2.907960] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.913273] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.918650] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.923976] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.929308] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.934610] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.939919] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.945221] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 3.097685] usb 1-3: new high-speed USB device number 3 using tegra-xusb el-simple panel: panel supply power not found, using dummy regulator mount -t sysfs none /sys root@(none):/# root@(none):/# [ 4.117716] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.305954] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.313178] scsi host0: usb-storage 1-1:1.0 [ 4.317834] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.324048] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.319367] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.328039] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.334259] panel-simple panel: panel supply power not found, using dummy regulator [ 5.525486] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.534154] sd 0:0:0:0: [sda] Write Protect is off [ 5.538977] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.545383] sd 0:0:0:0: [sda] No Caching mode page found [ 5.550725] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.579798] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.593982] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 6.050377] PM: suspend entry (deep) [ 6.053947] PM: Syncing filesystems ... done. [ 6.060184] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.068333] OOM killer disabled. [ 6.071562] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.080186] Suspending console(s) (use no_console_suspend to debug) [ 6.271763] Disabling non-boot CPUs ... [ 6.447748] IRQ17 no longer affine to CPU3 [ 6.448438] Entering suspend state LP1 [ 6.448463] Enabling non-boot CPUs ... [ 6.449212] CPU1 is up [ 6.449842] CPU2 is up [ 6.450554] CPU3 is up [ 6.491360] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.503469] mmc1: Switching to 3.3V signalling voltage failed [ 6.718247] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 7.030773] tegra-sor 54540000.sor: failed to probe output: -517 [ 7.030941] panel-simple panel: panel supply power not found, using dummy regulator [ 7.085357] OOM killer enabled. [ 7.088521] Restarting tasks ... done. [ 7.092924] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.687354] PM: suspend entry (deep) [ 7.690954] PM: Syncing filesystems ... done. [ 7.696620] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.704789] OOM killer disabled. [ 7.708027] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.716622] Suspending console(s) (use no_console_suspend to debug) [ 7.901346] Disabling non-boot CPUs ... [ 7.977763] IRQ17 no longer affine to CPU1 [ 8.098230] Entering suspend state LP1 [ 8.098255] Enabling non-boot CPUs ... [ 8.099045] CPU1 is up [ 8.099689] CPU2 is up [ 8.100407] CPU3 is up [ 8.151506] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.163558] mmc1: Switching to 3.3V signalling voltage failed [ 8.378034] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.692589] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.692758] panel-simple panel: panel supply power not found, using dummy regulator [ 8.747080] OOM killer enabled. [ 8.750215] Restarting tasks ... done. [ 8.754602] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 9.336452] PM: suspend entry (deep) [ 9.340039] PM: Syncing filesystems ... done. [ 9.345586] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.353762] OOM killer disabled. [ 9.356978] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.365580] Suspending console(s) (use no_console_suspend to debug) [ 9.551784] Disabling non-boot CPUs ... [ 9.697698] IRQ17 no longer affine to CPU3 [ 9.698207] Entering suspend state LP1 [ 9.698232] Enabling non-boot CPUs ... [ 9.699021] CPU1 is up [ 9.699681] CPU2 is up [ 9.700399] CPU3 is up [ 9.751549] cros-ec-spi spi0.0: spi transfer failed: -121 [ 9.763903] mmc1: Switching to 3.3V signalling voltage failed [ 10.293606] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.293777] panel-simple panel: panel supply power not found, using dummy regulator [ 10.341330] OOM killer enabled. [ 10.344471] Restarting tasks ... done. [ 10.349022] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 10.937024] PM: suspend entry (deep) [ 10.940613] PM: Syncing filesystems ... done. [ 10.946135] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.954303] OOM killer disabled. [ 10.957525] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.966126] Suspending console(s) (use no_console_suspend to debug) [ 11.151063] Disabling non-boot CPUs ... [ 11.328252] Entering suspend state LP1 [ 11.328277] Enabling non-boot CPUs ... [ 11.329053] CPU1 is up [ 11.329703] CPU2 is up [ 11.330426] CPU3 is up [ 11.381472] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.393712] mmc1: Switching to 3.3V signalling voltage failed [ 11.607988] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.921831] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.921999] panel-simple panel: panel supply power not found, using dummy regulator [ 11.972242] OOM killer enabled. [ 11.975371] Restarting tasks ... done. [ 11.979652] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 12.566346] PM: suspend entry (deep) [ 12.569933] PM: Syncing filesystems ... done. [ 12.575468] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.583553] OOM killer disabled. [ 12.586770] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.595360] Suspending console(s) (use no_console_suspend to debug) [ 12.781474] Disabling non-boot CPUs ... [ 12.887674] IRQ17 no longer affine to CPU2 [ 12.948164] Entering suspend state LP1 [ 12.948189] Enabling non-boot CPUs ... [ 12.948972] CPU1 is up [ 12.949618] CPU2 is up [ 12.950334] CPU3 is up [ 13.001509] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.013924] mmc1: Switching to 3.3V signalling voltage failed [ 13.227956] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.541753] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.541919] panel-simple panel: panel supply power not found, using dummy regulator [ 13.596351] OOM killer enabled. [ 13.599514] Restarting tasks ... done. [ 13.603725] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 14.186819] PM: suspend entry (deep) [ 14.190406] PM: Syncing filesystems ... done. [ 14.196048] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.204279] OOM killer disabled. [ 14.207531] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.216182] Suspending console(s) (use no_console_suspend to debug) [ 14.401023] Disabling non-boot CPUs ... [ 14.558131] Entering suspend state LP1 [ 14.558156] Enabling non-boot CPUs ... [ 14.558933] CPU1 is up [ 14.559581] CPU2 is up [ 14.560304] CPU3 is up [ 14.611329] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.623434] mmc1: Switching to 3.3V signalling voltage failed [ 15.152511] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.152680] panel-simple panel: panel supply power not found, using dummy regulator [ 15.196056] OOM killer enabled. [ 15.199198] Restarting tasks ... done. [ 15.203509] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 15.797229] PM: suspend entry (deep) [ 15.800819] PM: Syncing filesystems ... done. [ 15.806529] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.814697] OOM killer disabled. [ 15.817934] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.826522] Suspending console(s) (use no_console_suspend to debug) [ 16.010992] Disabling non-boot CPUs ... [ 16.168160] Entering suspend state LP1 [ 16.168185] Enabling non-boot CPUs ... [ 16.168967] CPU1 is up [ 16.169628] CPU2 is up [ 16.170346] CPU3 is up [ 16.221227] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.233211] mmc1: Switching to 3.3V signalling voltage failed [ 16.763459] tegra-sor 54540000.sor: failed to probe output: -517 [ 16.763628] panel-simple panel: panel supply power not found, using dummy regulator [ 16.807004] OOM killer enabled. [ 16.810146] Restarting tasks ... done. [ 16.814418] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 17.405757] PM: suspend entry (deep) [ 17.409345] PM: Syncing filesystems ... done. [ 17.414802] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.422886] OOM killer disabled. [ 17.426101] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.434702] Suspending console(s) (use no_console_suspend to debug) [ 17.621661] Disabling non-boot CPUs ... [ 17.768085] Entering suspend state LP1 [ 17.768110] Enabling non-boot CPUs ... [ 17.768894] CPU1 is up [ 17.769539] CPU2 is up [ 17.770256] CPU3 is up [ 17.821319] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.833725] mmc1: Switching to 3.3V signalling voltage failed [ 18.047888] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 18.363493] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.363663] panel-simple panel: panel supply power not found, using dummy regulator [ 18.413901] OOM killer enabled. [ 18.417030] Restarting tasks ... done. [ 18.421273] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 19.006194] PM: suspend entry (deep) [ 19.009781] PM: Syncing filesystems ... done. [ 19.015406] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.023582] OOM killer disabled. [ 19.026798] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.035388] Suspending console(s) (use no_console_suspend to debug) [ 19.220953] Disabling non-boot CPUs ... [ 19.397547] IRQ17 no longer affine to CPU3 [ 19.398058] Entering suspend state LP1 [ 19.398084] Enabling non-boot CPUs ... [ 19.398864] CPU1 is up [ 19.399515] CPU2 is up [ 19.400233] CPU3 is up [ 19.451465] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.463741] mmc1: Switching to 3.3V signalling voltage failed [ 19.990747] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.990915] panel-simple panel: panel supply power not found, using dummy regulator [ 20.038489] OOM killer enabled. [ 20.041629] Restarting tasks ... done. [ 20.046027] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 20.635275] PM: suspend entry (deep) [ 20.638857] PM: Syncing filesystems ... done. [ 20.644317] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.652401] OOM killer disabled. [ 20.655617] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.664216] Suspending console(s) (use no_console_suspend to debug) [ 20.851115] Disabling non-boot CPUs ... [ 20.937548] IRQ17 no longer affine to CPU2 [ 20.998033] Entering suspend state LP1 [ 20.998059] Enabling non-boot CPUs ... [ 20.998841] CPU1 is up [ 20.999489] CPU2 is up [ 21.000214] CPU3 is up [ 21.051394] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.063741] mmc1: Switching to 3.3V signalling voltage failed [ 21.277838] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.593523] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.593693] panel-simple panel: panel supply power not found, using dummy regulator [ 21.648017] OOM killer enabled. [ 21.651146] Restarting tasks ... done. [ 21.655591] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE