U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.4 MiB/s done Bytes transferred = 6383832 (6168d8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6168d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180201-230479-gf26e52e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 31 20:48:34 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008020] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017552] Switching to timer-based delay loop, resolution 1000ns [ 0.024084] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029772] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040519] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048490] Switching to timer-based delay loop, resolution 83ns [ 0.054671] Console: colour dummy device 80x30 [ 0.058898] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073972] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080390] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087722] CPU: Testing write buffer coherency: ok [ 0.092402] /cpus/cpu@0 missing clock-frequency property [ 0.097554] /cpus/cpu@1 missing clock-frequency property [ 0.102849] /cpus/cpu@2 missing clock-frequency property [ 0.108127] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153456] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158111] Hierarchical SRCU implementation. [ 0.173675] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193458] smp: Bringing up secondary CPUs ... [ 0.243708] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323734] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403775] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413605] smp: Brought up 1 node, 4 CPUs [ 0.432689] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438841] CPU: All CPU(s) started in SVC mode. [ 0.444139] devtmpfs: initialized [ 0.453466] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458506] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475756] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482044] pinctrl core: initialized pinctrl subsystem [ 0.487569] NET: Registered protocol family 16 [ 0.491967] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498884] cpuidle: using governor menu [ 0.509783] No ATAGs? [ 0.509844] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518185] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524879] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532546] iommu: Adding device 50000000.host1x to group 0 [ 0.537960] iommu: Adding device 54200000.dc to group 1 [ 0.543162] iommu: Adding device 54240000.dc to group 1 [ 0.548361] iommu: Adding device 57000000.gpu to group 2 [ 0.559435] +5V_SYS: supplied by +VDD_MUX [ 0.561661] +3.3V_SYS: supplied by +VDD_MUX [ 0.565989] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571321] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579425] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585361] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593474] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599228] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607345] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613094] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621269] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628088] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636277] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642128] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650726] vgaarb: loaded [ 0.653226] SCSI subsystem initialized [ 0.656782] libata version 3.00 loaded. [ 0.660626] usbcore: registered new interface driver usbfs [ 0.665986] usbcore: registered new interface driver hub [ 0.671300] usbcore: registered new device driver usb [ 0.677509] Linux video capture interface: v2.00 [ 0.680894] pps_core: LinuxPPS API ver. 1 registered [ 0.685817] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694919] PTP clock support registered [ 0.698966] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706179] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712348] Advanced Linux Sound Architecture Driver Initialized. [ 0.718563] Bluetooth: Core ver 2.22 [ 0.721878] NET: Registered protocol family 31 [ 0.726288] Bluetooth: HCI device and connection manager initialized [ 0.732609] Bluetooth: HCI socket layer initialized [ 0.737467] Bluetooth: L2CAP socket layer initialized [ 0.742502] Bluetooth: SCO socket layer initialized [ 0.747583] clocksource: Switched to clocksource arch_sys_counter [ 0.785793] NET: Registered protocol family 2 [ 0.788614] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795881] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802926] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809360] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815791] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821535] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827964] NET: Registered protocol family 1 [ 0.832454] RPC: Registered named UNIX socket transport module. [ 0.838077] RPC: Registered udp transport module. [ 0.842747] RPC: Registered tcp transport module. [ 0.847426] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864090] PCI: CLS 0 bytes, default 64 [ 0.866793] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.874900] Initialise system trusted keyrings [ 0.878746] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885552] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891201] NFS: Registering the id_resolver key type [ 0.895913] Key type id_resolver registered [ 0.900078] Key type id_legacy registered [ 0.905789] Key type asymmetric registered [ 0.908137] Asymmetric key parser 'x509' registered [ 0.913030] bounce: pool size: 64 pages [ 0.916818] io scheduler noop registered (default) [ 0.921567] io scheduler mq-deadline registered [ 0.926068] io scheduler kyber registered [ 0.930701] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943132] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949227] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.958025] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964788] console [ttyS0] disabled [ 0.967697] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976617] console [ttyS0] enabled [ 0.976617] console [ttyS0] enabled [ 0.982849] bootconsole [earlycon0] disabled [ 0.982849] bootconsole [earlycon0] disabled [ 1.008996] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015471] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.022983] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034394] loop: module loaded [ 1.038131] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048178] as3722-sd2: supplied by +5V_SYS [ 1.052600] as3722-sd3: supplied by +5V_SYS [ 1.056936] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063121] as3722-sd4: supplied by +5V_SYS [ 1.067456] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073216] as3722-sd5: supplied by +5V_SYS [ 1.078826] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084572] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090599] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096227] as3722-ldo3: supplied by +3.3V_SYS [ 1.100686] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108266] as3722-ldo4: supplied by +3.3V_SYS [ 1.112863] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118890] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123664] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130361] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136397] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141179] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147729] as3722-ldo9: supplied by +5V_SYS [ 1.152300] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158512] as3722-ldo10: supplied by +5V_SYS [ 1.163025] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169476] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192018] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207014] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.222551] libphy: Fixed MDIO Bus: probed [ 1.226636] CAN device driver interface [ 1.230488] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.237432] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.243070] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.250481] usbcore: registered new interface driver pegasus [ 1.256146] usbcore: registered new interface driver asix [ 1.261553] usbcore: registered new interface driver ax88179_178a [ 1.267661] usbcore: registered new interface driver cdc_ether [ 1.273501] usbcore: registered new interface driver smsc75xx [ 1.279262] usbcore: registered new interface driver smsc95xx [ 1.285010] usbcore: registered new interface driver net1080 [ 1.290681] usbcore: registered new interface driver cdc_subset [ 1.296603] usbcore: registered new interface driver zaurus [ 1.302192] usbcore: registered new interface driver cdc_ncm [ 1.307932] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.314442] ehci-pci: EHCI PCI platform driver [ 1.318901] tegra-ehci: Tegra EHCI driver [ 1.323169] usbcore: registered new interface driver cdc_acm [ 1.328819] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.336822] usbcore: registered new interface driver cdc_wdm [ 1.342497] usbcore: registered new interface driver usb-storage [ 1.349162] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.368854] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.375713] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.382483] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.389628] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.395909] i2c /dev entries driver [ 1.399823] usbcore: registered new interface driver uvcvideo [ 1.405553] USB Video Class driver (1.1.1) [ 1.409645] gspca_main: v2.14.0 registered [ 1.413965] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.422630] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.430970] sdhci: Secure Digital Host Controller Interface driver [ 1.437134] sdhci: Copyright(c) Pierre Ossman [ 1.441491] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.447267] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.461069] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.465940] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.485720] mmc0: Unknown controller version (3). You may experience problems. [ 1.492960] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.529737] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.537445] usbcore: registered new interface driver usbhid [ 1.543123] usbhid: USB HID core driver [ 1.549254] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.597467] mmc0: new high speed MMC card at address 0001 [ 1.603389] max98090 0-0010: MAX98090 REVID=0x43 [ 1.604808] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.614162] max98090 0-0010: use default 2.8v micbias [ 1.614378] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.626982] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.633022] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.633201] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.647961] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.649843] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.655941] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.669925] NET: Registered protocol family 10 [ 1.674953] Segment Routing with IPv6 [ 1.678681] mip6: Mobile IPv6 [ 1.681640] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.688084] NET: Registered protocol family 17 [ 1.692522] NET: Registered protocol family 15 [ 1.696952] can: controller area network core (rev 20170425 abi 9) [ 1.703197] NET: Registered protocol family 29 [ 1.707637] can: raw protocol (rev 20170425) [ 1.711895] can: broadcast manager protocol (rev 20170425 t) [ 1.717541] can: netlink gateway (rev 20170425) max_hops=1 [ 1.723100] Bluetooth: RFCOMM socket layer initialized [ 1.728242] Bluetooth: RFCOMM ver 1.11 [ 1.731983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.737283] Bluetooth: BNEP socket layer initialized [ 1.742240] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.748150] Bluetooth: HIDP socket layer initialized [ 1.753191] Key type dns_resolver registered [ 1.757658] Registering SWP/SWPB emulation handler [ 1.762694] Loading compiled-in X.509 certificates [ 1.774716] +3.3V_RUN: supplied by +3.3V_SYS [ 1.779662] +VDD_LED: supplied by +VDD_MUX [ 1.783855] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.789596] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.794299] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.799036] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.804212] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.808940] +5V_USB_HS: supplied by +5V_SYS [ 1.813262] +5V_USB_SS: supplied by +5V_SYS [ 1.818494] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.823984] +3.3V_LP0: supplied by +3.3V_SYS [ 1.828990] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.834804] +5V_HDMI_CON: supplied by +5V_SYS [ 1.839789] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.846521] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.859658] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.865871] panel-simple panel: panel supply power not found, using dummy regulator [ 1.938316] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.945713] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.951160] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.960691] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.969318] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.975690] hub 1-0:1.0: USB hub found [ 1.979517] hub 1-0:1.0: 6 ports detected [ 1.983891] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.989294] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.996960] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.005453] hub 2-0:1.0: USB hub found [ 2.009265] hub 2-0:1.0: 2 ports detected [ 2.014317] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.027810] mmc1: Unknown controller version (3). You may experience problems. [ 2.035054] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.041550] mmc1: Switching to 3.3V signalling voltage failed [ 2.070329] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.077974] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.082845] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.093080] mmc2: Unknown controller version (3). You may experience problems. [ 2.100420] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.135253] mmc1: new high speed SDIO card at address 0001 [ 2.141063] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.148672] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.154838] panel-simple panel: panel supply power not found, using dummy regulator [ 2.162952] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.169594] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.175823] panel-simple panel: panel supply power not found, using dummy regulator [ 2.183757] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.192563] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.202498] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.209336] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.218029] cfg80211: failed to load regulatory.db [ 2.218354] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.227342] +1.8V_RUN_CAM: disabling [ 2.231223] +1.2V_RUN_CAM_FRONT: disabling [ 2.235554] +1.05V_RUN_CAM_REAR: disabling [ 2.239961] +2.8V_RUN_TOUCH: disabling [ 2.243986] +2.8V_RUN_CAM_AF: disabling [ 2.248217] +1.8V_RUN_VPP_FUSE: disabling [ 2.252493] +VDD_LED: disabling [ 2.255674] +5V_VDD_TS_SW: disabling [ 2.259318] +3.3V_PANEL: disabling [ 2.262763] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.267330] +5V_HDMI_CON: disabling [ 2.270929] ALSA device list: [ 2.273942] #1: GoogleNyanBig [ 2.308122] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.316577] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.316679] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.331248] panel-simple panel: panel supply power not found, using dummy regulator [ 2.357619] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.415325] mmc2: new high speed SDHC card at address 0007 [ 2.422694] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.436099] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.442374] GPT:3014591 != 15564799 [ 2.445854] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.453264] GPT:3014591 != 15564799 [ 2.456742] GPT: Use GNU Parted to correct GPT errors. [ 2.461897] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.468996] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.475162] panel-simple panel: panel supply power not found, using dummy regulator [ 2.493369] EXT4-fs (mmcblk0p3): recovery complete [ 2.498188] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.506289] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.513313] devtmpfs: mounted [ 2.516724] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in th[ 2.606654] alloc_contig_range: [fbc77, fbc78) PFNs busy is shell [ 2.615701] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.621267] alloc_contig_range: [fbc79, fbc7a) PFNs busy root@(none):/# [ 2.626742] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.633226] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.638574] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.643877] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.649222] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.654526] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.659872] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.739206] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.754001] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.763507] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.769676] panel-simple panel: panel supply power not found, using dummy regulator [ 3.107674] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.777288] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.788387] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.794556] panel-simple panel: panel supply power not found, using dummy regulator [ 4.137674] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.325957] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.332888] scsi host0: usb-storage 1-1:1.0 [ 4.337496] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.343691] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399371] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408071] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414299] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 [ 5.605203] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.613716] sd 0:0:0:0: [sda] Write Protect is off [ 5.618627] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.624998] sd 0:0:0:0: [sda] No Caching mode page found [ 5.630340] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.656345] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.668707] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.677512] PM: suspend entry (deep) [ 5.681120] PM: Syncing filesystems ... done. [ 5.686776] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 5.694648] OOM killer disabled. [ 5.697900] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.706486] Suspending console(s) (use no_console_suspend to debug) [ 5.891991] Disabling non-boot CPUs ... [ 5.947783] IRQ17 no longer affine to CPU1 [ 6.068316] Entering suspend state LP1 [ 6.068341] Enabling non-boot CPUs ... [ 6.069061] CPU1 is up [ 6.069663] CPU2 is up [ 6.070314] CPU3 is up [ 6.111422] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.123589] mmc1: Switching to 3.3V signalling voltage failed [ 6.652501] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.652671] panel-simple panel: panel supply power not found, using dummy regulator [ 6.700167] OOM killer enabled. [ 6.703297] Restarting tasks ... done. [ 6.707817] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.835366] PM: suspend entry (deep) [ 7.838950] PM: Syncing filesystems ... done. [ 7.844401] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.852485] OOM killer disabled. [ 7.855701] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.864298] Suspending console(s) (use no_console_suspend to debug) [ 8.051573] Disabling non-boot CPUs ... [ 8.127751] IRQ17 no longer affine to CPU1 [ 8.238241] Entering suspend state LP1 [ 8.238267] Enabling non-boot CPUs ... [ 8.239023] CPU1 is up [ 8.239639] CPU2 is up [ 8.240301] CPU3 is up [ 8.291500] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.303698] mmc1: Switching to 3.3V signalling voltage failed [ 8.832478] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.832650] panel-simple panel: panel supply power not found, using dummy regulator [ 8.880126] OOM killer enabled. [ 8.883255] Restarting tasks ... done. [ 8.888055] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 10.005444] PM: suspend entry (deep) [ 10.009027] PM: Syncing filesystems ... done. [ 10.014498] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.022680] OOM killer disabled. [ 10.025896] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.034507] Suspending console(s) (use no_console_suspend to debug) [ 10.221544] Disabling non-boot CPUs ... [ 10.417688] IRQ17 no longer affine to CPU3 [ 10.418264] Entering suspend state LP1 [ 10.418289] Enabling non-boot CPUs ... [ 10.419044] CPU1 is up [ 10.419660] CPU2 is up [ 10.420322] CPU3 is up [ 10.471555] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.483970] mmc1: Switching to 3.3V signalling voltage failed [ 10.697925] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.012724] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.012895] panel-simple panel: panel supply power not found, using dummy regulator [ 11.067224] OOM killer enabled. [ 11.070360] Restarting tasks ... done. [ 11.074568] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.187122] PM: suspend entry (deep) [ 12.190711] PM: Syncing filesystems ... done. [ 12.196412] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.204546] OOM killer disabled. [ 12.207840] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.216468] Suspending console(s) (use no_console_suspend to debug) [ 12.401680] Disabling non-boot CPUs ... [ 12.447700] IRQ17 no longer affine to CPU1 [ 12.578190] Entering suspend state LP1 [ 12.578215] Enabling non-boot CPUs ... [ 12.578970] CPU1 is up [ 12.579586] CPU2 is up [ 12.580250] CPU3 is up [ 12.631534] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.643952] mmc1: Switching to 3.3V signalling voltage failed [ 12.858009] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.171709] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.171879] panel-simple panel: panel supply power not found, using dummy regulator [ 13.226321] OOM killer enabled. [ 13.229478] Restarting tasks ... done. [ 13.233727] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.345391] PM: suspend entry (deep) [ 14.348974] PM: Syncing filesystems ... done. [ 14.354443] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.362623] OOM killer disabled. [ 14.365839] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.374440] Suspending console(s) (use no_console_suspend to debug) [ 14.561246] Disabling non-boot CPUs ... [ 14.728174] Entering suspend state LP1 [ 14.728199] Enabling non-boot CPUs ... [ 14.728957] CPU1 is up [ 14.729572] CPU2 is up [ 14.730235] CPU3 is up [ 14.781493] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.793991] mmc1: Switching to 3.3V signalling voltage failed [ 15.322373] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.322544] panel-simple panel: panel supply power not found, using dummy regulator [ 15.365921] OOM killer enabled. [ 15.369063] Restarting tasks ... done. [ 15.373351] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.495371] PM: suspend entry (deep) [ 16.498953] PM: Syncing filesystems ... done. [ 16.504421] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.512600] OOM killer disabled. [ 16.515816] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.524415] Suspending console(s) (use no_console_suspend to debug) [ 16.711463] Disabling non-boot CPUs ... [ 16.757649] IRQ17 no longer affine to CPU1 [ 16.888124] Entering suspend state LP1 [ 16.888149] Enabling non-boot CPUs ... [ 16.888905] CPU1 is up [ 16.889520] CPU2 is up [ 16.890186] CPU3 is up [ 16.941454] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.953691] mmc1: Switching to 3.3V signalling voltage failed [ 17.167961] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.482345] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.482518] panel-simple panel: panel supply power not found, using dummy regulator [ 17.536961] OOM killer enabled. [ 17.540118] Restarting tasks ... done. [ 17.544307] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.655344] PM: suspend entry (deep) [ 18.658920] PM: Syncing filesystems ... done. [ 18.664386] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.672472] OOM killer disabled. [ 18.675688] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.684280] Suspending console(s) (use no_console_suspend to debug) [ 18.870987] Disabling non-boot CPUs ... [ 19.017588] IRQ17 no longer affine to CPU3 [ 19.018133] Entering suspend state LP1 [ 19.018158] Enabling non-boot CPUs ... [ 19.018917] CPU1 is up [ 19.019534] CPU2 is up [ 19.020194] CPU3 is up [ 19.071405] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.083641] mmc1: Switching to 3.3V signalling voltage failed [ 19.612320] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.612488] panel-simple panel: panel supply power not found, using dummy regulator [ 19.660061] OOM killer enabled. [ 19.663202] Restarting tasks ... done. [ 19.667541] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.785315] PM: suspend entry (deep) [ 20.788897] PM: Syncing filesystems ... done. [ 20.794352] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.802437] OOM killer disabled. [ 20.805653] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.814240] Suspending console(s) (use no_console_suspend to debug) [ 21.001894] Disabling non-boot CPUs ... [ 21.148094] Entering suspend state LP1 [ 21.148119] Enabling non-boot CPUs ... [ 21.148876] CPU1 is up [ 21.149492] CPU2 is up [ 21.150154] CPU3 is up [ 21.201362] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.213761] mmc1: Switching to 3.3V signalling voltage failed [ 21.427868] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.742298] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.742468] panel-simple panel: panel supply power not found, using dummy regulator [ 21.792698] OOM killer enabled. [ 21.795827] Restarting tasks ... done. [ 21.800074] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.917077] PM: suspend entry (deep) [ 22.920666] PM: Syncing filesystems ... done. [ 22.926368] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.934454] OOM killer disabled. [ 22.937686] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.946253] Suspending console(s) (use no_console_suspend to debug) [ 23.131466] Disabling non-boot CPUs ... [ 23.307531] IRQ17 no longer affine to CPU3 [ 23.308145] Entering suspend state LP1 [ 23.308170] Enabling non-boot CPUs ... [ 23.308926] CPU1 is up [ 23.309545] CPU2 is up [ 23.310210] CPU3 is up [ 23.361813] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.373894] mmc1: Switching to 3.3V signalling voltage failed [ 23.587856] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.900848] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.901019] panel-simple panel: panel supply power not found, using dummy regulator [ 23.955393] OOM killer enabled. [ 23.958550] Restarting tasks ... done. [ 23.962806] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 25.086698] PM: suspend entry (deep) [ 25.090284] PM: Syncing filesystems ... done. [ 25.095926] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.104103] OOM killer disabled. [ 25.107319] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.115902] Suspending console(s) (use no_console_suspend to debug) [ 25.300966] Disabling non-boot CPUs ... [ 25.468021] Entering suspend state LP1 [ 25.468047] Enabling non-boot CPUs ... [ 25.468808] CPU1 is up [ 25.469422] CPU2 is up [ 25.470086] CPU3 is up [ 25.521470] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.533752] mmc1: Switching to 3.3V signalling voltage failed [ 25.747850] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 26.060931] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.061105] panel-simple panel: panel supply power not found, using dummy regulator [ 26.111450] OOM killer enabled. [ 26.114592] Restarting tasks ... done. [ 26.119027] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE