U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 3.3 MiB/s done Bytes transferred = 8167936 (7ca200 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7ca200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180201-348720-gf26e52e08ab8 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 31 20:49:02 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632 [ 0.000000] pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993488K/2097148K available (11264K kernel code, 1570K rwdata, 4352K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1571 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000010] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000016] Switching to timer-based delay loop, resolution 1000ns [ 0.001882] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001889] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001896] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001901] Switching to timer-based delay loop, resolution 83ns [ 0.002117] Console: colour dummy device 80x30 [ 0.002134] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002142] pid_max: default: 32768 minimum: 301 [ 0.002187] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002192] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002395] CPU: Testing write buffer coherency: ok [ 0.002525] /cpus/cpu@0 missing clock-frequency property [ 0.002541] /cpus/cpu@1 missing clock-frequency property [ 0.002555] /cpus/cpu@2 missing clock-frequency property [ 0.002571] /cpus/cpu@3 missing clock-frequency property [ 0.002576] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002696] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003412] Hierarchical SRCU implementation. [ 0.004504] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004809] EFI services will not be available. [ 0.004871] smp: Bringing up secondary CPUs ... [ 0.005102] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012094] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022101] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031886] smp: Brought up 1 node, 4 CPUs [ 0.031894] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031897] CPU: All CPU(s) started in SVC mode. [ 0.032453] devtmpfs: initialized [ 0.037676] Built 1 zonelists, mobility grouping on. Total pages: 514756 [ 0.037833] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038070] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038172] pinctrl core: initialized pinctrl subsystem [ 0.038745] DMI not present or invalid. [ 0.038852] NET: Registered protocol family 16 [ 0.039545] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040464] cpuidle: using governor menu [ 0.048624] No ATAGs? [ 0.048678] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048685] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051511] Serial: AMBA PL011 UART driver [ 0.051945] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052074] iommu: Adding device 50000000.host1x to group 0 [ 0.052100] iommu: Adding device 54200000.dc to group 1 [ 0.052126] iommu: Adding device 54240000.dc to group 1 [ 0.052161] iommu: Adding device 57000000.gpu to group 2 [ 0.057294] AT91: Could not find identification node [ 0.057498] +5V_SYS: supplied by +VDD_MUX [ 0.057602] +3.3V_SYS: supplied by +VDD_MUX [ 0.057811] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.057818] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.057851] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.057856] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.057888] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.057893] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.057926] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.057931] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058016] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058020] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058052] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058057] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059035] vgaarb: loaded [ 0.059298] SCSI subsystem initialized [ 0.059369] libata version 3.00 loaded. [ 0.059441] usbcore: registered new interface driver usbfs [ 0.059458] usbcore: registered new interface driver hub [ 0.059484] usbcore: registered new device driver usb [ 0.060756] pps_core: LinuxPPS API ver. 1 registered [ 0.060761] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.060770] PTP clock support registered [ 0.060834] EDAC MC: Ver: 3.0.0 [ 0.061277] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.061287] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.061706] clocksource: Switched to clocksource arch_sys_counter [ 0.080177] NET: Registered protocol family 2 [ 0.080376] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.080388] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.080422] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.080485] TCP: Hash tables configured (established 8192 bind 8192) [ 0.080520] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.080535] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.080596] NET: Registered protocol family 1 [ 0.080751] RPC: Registered named UNIX socket transport module. [ 0.080755] RPC: Registered udp transport module. [ 0.080758] RPC: Registered tcp transport module. [ 0.080761] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.080767] PCI: CLS 0 bytes, default 64 [ 0.081332] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.081945] Initialise system trusted keyrings [ 0.082006] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.084341] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.084568] NFS: Registering the id_resolver key type [ 0.084577] Key type id_resolver registered [ 0.084581] Key type id_legacy registered [ 0.084597] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.085149] Key type asymmetric registered [ 0.085154] Asymmetric key parser 'x509' registered [ 0.085174] bounce: pool size: 64 pages [ 0.085194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.085199] io scheduler noop registered [ 0.085202] io scheduler deadline registered [ 0.085281] io scheduler cfq registered (default) [ 0.085286] io scheduler mq-deadline registered [ 0.085289] io scheduler kyber registered [ 0.086666] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.097326] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.098498] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.115040] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.116090] console [ttyS0] disabled [ 0.116109] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.050127] console [ttyS0] enabled [ 1.053913] SuperH (H)SCI(F) driver initialized [ 1.058790] msm_serial: driver initialized [ 1.062945] STMicroelectronics ASC driver initialized [ 1.070112] Failed to attached device 54200000.dc to IOMMU_mapping [ 1.084435] Failed to attached device 54240000.dc to IOMMU_mapping [ 1.098877] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.105353] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.112830] panel-simple panel: panel supply power not found, using dummy regulator [ 1.123170] brd: module loaded [ 1.128659] loop: module loaded [ 1.132756] as3722 4-0040: AS3722 with revision 0x1 found [ 1.142749] as3722-sd2: supplied by +5V_SYS [ 1.147150] as3722-sd3: supplied by +5V_SYS [ 1.151483] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.157648] as3722-sd4: supplied by +5V_SYS [ 1.161982] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.167706] as3722-sd5: supplied by +5V_SYS [ 1.173266] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.178976] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.184987] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.190582] as3722-ldo3: supplied by +3.3V_SYS [ 1.195035] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.202595] as3722-ldo4: supplied by +3.3V_SYS [ 1.207192] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.213201] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.217964] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.224638] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.230647] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.235419] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.241961] as3722-ldo9: supplied by +5V_SYS [ 1.246523] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.252714] as3722-ldo10: supplied by +5V_SYS [ 1.257216] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.263644] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.282300] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.287953] libphy: Fixed MDIO Bus: probed [ 1.292373] CAN device driver interface [ 1.296511] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.302615] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.308431] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.314361] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.321304] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.328185] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.335590] usbcore: registered new interface driver pegasus [ 1.341246] usbcore: registered new interface driver asix [ 1.346649] usbcore: registered new interface driver ax88179_178a [ 1.352742] usbcore: registered new interface driver cdc_ether [ 1.358572] usbcore: registered new interface driver smsc75xx [ 1.364321] usbcore: registered new interface driver smsc95xx [ 1.370060] usbcore: registered new interface driver net1080 [ 1.375719] usbcore: registered new interface driver cdc_subset [ 1.381632] usbcore: registered new interface driver zaurus [ 1.387211] usbcore: registered new interface driver cdc_ncm [ 1.393538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.400049] ehci-pci: EHCI PCI platform driver [ 1.404495] ehci-platform: EHCI generic platform driver [ 1.409775] ehci-orion: EHCI orion driver [ 1.413834] SPEAr-ehci: EHCI SPEAr driver [ 1.417879] ehci-st: EHCI STMicroelectronics driver [ 1.422796] ehci-exynos: EHCI EXYNOS driver [ 1.427018] ehci-atmel: EHCI Atmel driver [ 1.431060] tegra-ehci: Tegra EHCI driver [ 1.435126] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.441293] ohci-pci: OHCI PCI platform driver [ 1.445740] ohci-platform: OHCI generic platform driver [ 1.451012] SPEAr-ohci: OHCI SPEAr driver [ 1.455062] ohci-st: OHCI STMicroelectronics driver [ 1.459972] ohci-atmel: OHCI Atmel driver [ 1.464231] usbcore: registered new interface driver usb-storage [ 1.471291] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.479844] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.486710] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.493641] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.500773] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.507134] i2c /dev entries driver [ 1.513018] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.524437] sdhci: Secure Digital Host Controller Interface driver [ 1.530601] sdhci: Copyright(c) Pierre Ossman [ 1.535527] Synopsys Designware Multimedia Card Interface Driver [ 1.542032] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.547959] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.561761] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.566632] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.585734] mmc0: Unknown controller version (3). You may experience problems. [ 1.592975] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.629683] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.637825] ledtrig-cpu: registered to indicate activity on CPUs [ 1.643887] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.643961] usbcore: registered new interface driver usbhid [ 1.653879] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.659252] usbhid: USB HID core driver [ 1.661206] NET: Registered protocol family 10 [ 1.675917] Segment Routing with IPv6 [ 1.679592] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.685703] NET: Registered protocol family 17 [ 1.690135] can: controller area network core (rev 20170425 abi 9) [ 1.696330] NET: Registered protocol family 29 [ 1.700760] can: raw protocol (rev 20170425) [ 1.705025] can: broadcast manager protocol (rev 20170425 t) [ 1.710671] can: netlink gateway (rev 20170425) max_hops=1 [ 1.716271] Key type dns_resolver registered [ 1.720732] ThumbEE CPU extension supported. [ 1.724998] Registering SWP/SWPB emulation handler [ 1.730001] Loading compiled-in X.509 certificates [ 1.741590] +3.3V_RUN: supplied by +3.3V_SYS [ 1.746706] +VDD_LED: supplied by +VDD_MUX [ 1.750872] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.756563] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.761264] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.765925] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.771260] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.776169] +5V_USB_HS: supplied by +5V_SYS [ 1.777916] mmc0: new high speed MMC card at address 0001 [ 1.780807] +5V_USB_SS: supplied by +5V_SYS [ 1.786087] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.791031] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.794693] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.800037] +3.3V_LP0: supplied by +3.3V_SYS [ 1.805125] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.810168] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.821077] +5V_HDMI_CON: supplied by +5V_SYS [ 1.825582] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0) [ 1.826505] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.837467] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.839611] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.851940] elan_i2c 1-0015: failed to read report data: -121 [ 1.865139] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.871806] panel-simple panel: panel supply power not found, using dummy regulator [ 1.880690] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.894659] mmc1: Unknown controller version (3). You may experience problems. [ 1.901923] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.908248] mmc1: Switching to 3.3V signalling voltage failed [ 1.939246] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.947428] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.952358] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.962677] mmc2: Unknown controller version (3). You may experience problems. [ 1.969935] elan_i2c 1-0015: invalid report id data (ff) [ 1.975319] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.010842] mmc1: new high speed SDIO card at address 0001 [ 2.016568] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.024487] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.031038] panel-simple panel: panel supply power not found, using dummy regulator [ 2.039875] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.047259] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.053838] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:52 UTC (946684912) [ 2.054466] panel-simple panel: panel supply power not found, using dummy regulator [ 2.062898] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.074668] +1.05V_RUN: disabling [ 2.078208] +1.8V_RUN_CAM: disabling [ 2.081985] +3.3V_RUN_CAM: disabling [ 2.085770] +1.2V_RUN_CAM_FRONT: disabling [ 2.090072] +1.05V_RUN_CAM_REAR: disabling [ 2.094438] +2.8V_RUN_TOUCH: disabling [ 2.098347] +2.8V_RUN_CAM_AF: disabling [ 2.102413] +1.8V_RUN_VPP_FUSE: disabling [ 2.106579] +VDD_LED: disabling [ 2.109721] +5V_VDD_TS_SW: disabling [ 2.113325] +5V_USB_HS: disabling [ 2.116639] +5V_USB_SS: disabling [ 2.119945] +3.3V_PANEL: disabling [ 2.123378] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.127905] +5V_HDMI_CON: disabling [ 2.132242] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.140827] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.214732] mmc2: new high speed SDHC card at address 0007 [ 2.220483] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.234419] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.240591] GPT:3014591 != 15564799 [ 2.244097] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.251474] GPT:3014591 != 15564799 [ 2.254964] GPT: Use GNU Parted to correct GPT errors. [ 2.260111] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.268812] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.275643] panel-simple panel: panel supply power not found, using dummy regulator [ 2.338064] EXT4-fs (mmcblk0p3): recovery complete [ 2.343587] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.351689] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.358316] devtmpfs: mounted [ 2.362005] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#