U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6384624 (616bf0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616bf0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180131-230376-g537659c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:03:05 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008023] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017555] Switching to timer-based delay loop, resolution 1000ns [ 0.024092] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029775] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040522] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048493] Switching to timer-based delay loop, resolution 83ns [ 0.054677] Console: colour dummy device 80x30 [ 0.058900] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069211] pid_max: default: 32768 minimum: 301 [ 0.073978] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080393] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087735] CPU: Testing write buffer coherency: ok [ 0.092409] /cpus/cpu@0 missing clock-frequency property [ 0.097556] /cpus/cpu@1 missing clock-frequency property [ 0.102853] /cpus/cpu@2 missing clock-frequency property [ 0.108130] /cpus/cpu@3 missing clock-frequency property [ 0.113411] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153455] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158110] Hierarchical SRCU implementation. [ 0.173678] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193460] smp: Bringing up secondary CPUs ... [ 0.243707] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323733] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403773] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413602] smp: Brought up 1 node, 4 CPUs [ 0.432685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438838] CPU: All CPU(s) started in SVC mode. [ 0.444133] devtmpfs: initialized [ 0.453526] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458572] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475816] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482104] pinctrl core: initialized pinctrl subsystem [ 0.487630] NET: Registered protocol family 16 [ 0.492026] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498944] cpuidle: using governor menu [ 0.509736] No ATAGs? [ 0.509796] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518138] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524829] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532503] iommu: Adding device 50000000.host1x to group 0 [ 0.537912] iommu: Adding device 54200000.dc to group 1 [ 0.543113] iommu: Adding device 54240000.dc to group 1 [ 0.548313] iommu: Adding device 57000000.gpu to group 2 [ 0.559322] +5V_SYS: supplied by +VDD_MUX [ 0.561550] +3.3V_SYS: supplied by +VDD_MUX [ 0.565874] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571209] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579311] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585248] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593362] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599115] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607229] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.612981] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621153] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.627975] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636162] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642014] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650612] vgaarb: loaded [ 0.653111] SCSI subsystem initialized [ 0.656668] libata version 3.00 loaded. [ 0.660513] usbcore: registered new interface driver usbfs [ 0.665872] usbcore: registered new interface driver hub [ 0.671186] usbcore: registered new device driver usb [ 0.677393] Linux video capture interface: v2.00 [ 0.680781] pps_core: LinuxPPS API ver. 1 registered [ 0.685703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694807] PTP clock support registered [ 0.698849] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706066] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712235] Advanced Linux Sound Architecture Driver Initialized. [ 0.718445] Bluetooth: Core ver 2.22 [ 0.721765] NET: Registered protocol family 31 [ 0.726174] Bluetooth: HCI device and connection manager initialized [ 0.732495] Bluetooth: HCI socket layer initialized [ 0.737353] Bluetooth: L2CAP socket layer initialized [ 0.742389] Bluetooth: SCO socket layer initialized [ 0.747471] clocksource: Switched to clocksource arch_sys_counter [ 0.785653] NET: Registered protocol family 2 [ 0.788479] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795741] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809219] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815658] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821395] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827829] NET: Registered protocol family 1 [ 0.832313] RPC: Registered named UNIX socket transport module. [ 0.837936] RPC: Registered udp transport module. [ 0.842606] RPC: Registered tcp transport module. [ 0.847286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.863948] PCI: CLS 0 bytes, default 64 [ 0.866645] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.874760] Initialise system trusted keyrings [ 0.878602] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885412] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891056] NFS: Registering the id_resolver key type [ 0.895772] Key type id_resolver registered [ 0.899937] Key type id_legacy registered [ 0.905627] Key type asymmetric registered [ 0.907995] Asymmetric key parser 'x509' registered [ 0.912888] bounce: pool size: 64 pages [ 0.916678] io scheduler noop registered (default) [ 0.921426] io scheduler mq-deadline registered [ 0.925926] io scheduler kyber registered [ 0.930562] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.942973] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949067] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.957860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964622] console [ttyS0] disabled [ 0.967540] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976456] console [ttyS0] enabled [ 0.976456] console [ttyS0] enabled [ 0.982690] bootconsole [earlycon0] disabled [ 0.982690] bootconsole [earlycon0] disabled [ 1.008827] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015302] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.022820] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034218] loop: module loaded [ 1.037948] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048006] as3722-sd2: supplied by +5V_SYS [ 1.052428] as3722-sd3: supplied by +5V_SYS [ 1.056763] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.062951] as3722-sd4: supplied by +5V_SYS [ 1.067284] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073045] as3722-sd5: supplied by +5V_SYS [ 1.078651] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084397] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090422] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096047] as3722-ldo3: supplied by +3.3V_SYS [ 1.100510] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108087] as3722-ldo4: supplied by +3.3V_SYS [ 1.112683] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118715] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123484] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130181] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136214] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.140993] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147552] as3722-ldo9: supplied by +5V_SYS [ 1.152121] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158331] as3722-ldo10: supplied by +5V_SYS [ 1.162843] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169293] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.191568] cros-ec-spi spi0.0: Chrome EC device registered [ 1.206483] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.222010] libphy: Fixed MDIO Bus: probed [ 1.226096] CAN device driver interface [ 1.229947] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.236891] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.242527] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.249940] usbcore: registered new interface driver pegasus [ 1.255606] usbcore: registered new interface driver asix [ 1.261013] usbcore: registered new interface driver ax88179_178a [ 1.267109] usbcore: registered new interface driver cdc_ether [ 1.272961] usbcore: registered new interface driver smsc75xx [ 1.278722] usbcore: registered new interface driver smsc95xx [ 1.284470] usbcore: registered new interface driver net1080 [ 1.290141] usbcore: registered new interface driver cdc_subset [ 1.296063] usbcore: registered new interface driver zaurus [ 1.301652] usbcore: registered new interface driver cdc_ncm [ 1.307384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.313905] ehci-pci: EHCI PCI platform driver [ 1.318361] tegra-ehci: Tegra EHCI driver [ 1.322623] usbcore: registered new interface driver cdc_acm [ 1.328273] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.336275] usbcore: registered new interface driver cdc_wdm [ 1.341950] usbcore: registered new interface driver usb-storage [ 1.348613] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.368220] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.375077] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.381842] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.388988] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.395269] i2c /dev entries driver [ 1.399182] usbcore: registered new interface driver uvcvideo [ 1.404912] USB Video Class driver (1.1.1) [ 1.409005] gspca_main: v2.14.0 registered [ 1.413321] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.421986] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.430325] sdhci: Secure Digital Host Controller Interface driver [ 1.436489] sdhci: Copyright(c) Pierre Ossman [ 1.440843] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.446617] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.460425] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.465296] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.485606] mmc0: Unknown controller version (3). You may experience problems. [ 1.492846] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.529621] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.537329] usbcore: registered new interface driver usbhid [ 1.543008] usbhid: USB HID core driver [ 1.549118] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.597358] mmc0: new high speed MMC card at address 0001 [ 1.603278] max98090 0-0010: MAX98090 REVID=0x43 [ 1.604699] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.614052] max98090 0-0010: use default 2.8v micbias [ 1.614260] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.626873] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.632911] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.633085] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.647836] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.649736] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.655819] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.669854] NET: Registered protocol family 10 [ 1.674882] Segment Routing with IPv6 [ 1.678610] mip6: Mobile IPv6 [ 1.681569] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.688019] NET: Registered protocol family 17 [ 1.692456] NET: Registered protocol family 15 [ 1.696886] can: controller area network core (rev 20170425 abi 9) [ 1.703137] NET: Registered protocol family 29 [ 1.707577] can: raw protocol (rev 20170425) [ 1.711834] can: broadcast manager protocol (rev 20170425 t) [ 1.717489] can: netlink gateway (rev 20170425) max_hops=1 [ 1.723040] Bluetooth: RFCOMM socket layer initialized [ 1.728182] Bluetooth: RFCOMM ver 1.11 [ 1.731923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.737222] Bluetooth: BNEP socket layer initialized [ 1.742177] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.748087] Bluetooth: HIDP socket layer initialized [ 1.753137] Key type dns_resolver registered [ 1.757599] Registering SWP/SWPB emulation handler [ 1.762639] Loading compiled-in X.509 certificates [ 1.774512] +3.3V_RUN: supplied by +3.3V_SYS [ 1.779445] +VDD_LED: supplied by +VDD_MUX [ 1.783641] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.789378] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.794083] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.798817] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.803995] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.808721] +5V_USB_HS: supplied by +5V_SYS [ 1.813043] +5V_USB_SS: supplied by +5V_SYS [ 1.818334] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.823833] +3.3V_LP0: supplied by +3.3V_SYS [ 1.828847] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.834661] +5V_HDMI_CON: supplied by +5V_SYS [ 1.839755] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.846493] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.859677] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.865891] panel-simple panel: panel supply power not found, using dummy regulator [ 1.938205] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.945602] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.951046] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.960567] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.969192] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.975568] hub 1-0:1.0: USB hub found [ 1.979394] hub 1-0:1.0: 6 ports detected [ 1.983766] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.989169] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.996833] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.005331] hub 2-0:1.0: USB hub found [ 2.009142] hub 2-0:1.0: 2 ports detected [ 2.014167] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.027696] mmc1: Unknown controller version (3). You may experience problems. [ 2.034940] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.041427] mmc1: Switching to 3.3V signalling voltage failed [ 2.070217] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.077857] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.082729] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.092967] mmc2: Unknown controller version (3). You may experience problems. [ 2.100307] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.135886] mmc1: new high speed SDIO card at address 0001 [ 2.141713] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.149316] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.155477] panel-simple panel: panel supply power not found, using dummy regulator [ 2.163593] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.170230] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.176454] panel-simple panel: panel supply power not found, using dummy regulator [ 2.184388] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.193191] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.203168] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.209910] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.217902] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.218538] cfg80211: failed to load regulatory.db [ 2.223095] +1.8V_RUN_CAM: disabling [ 2.231727] +1.2V_RUN_CAM_FRONT: disabling [ 2.235964] +1.05V_RUN_CAM_REAR: disabling [ 2.240304] +2.8V_RUN_TOUCH: disabling [ 2.244163] +2.8V_RUN_CAM_AF: disabling [ 2.248514] +1.8V_RUN_VPP_FUSE: disabling [ 2.252705] +VDD_LED: disabling [ 2.255874] +5V_VDD_TS_SW: disabling [ 2.259480] +3.3V_PANEL: disabling [ 2.262874] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.267432] +5V_HDMI_CON: disabling [ 2.270987] ALSA device list: [ 2.273956] #1: GoogleNyanBig [ 2.317975] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.324267] panel-simple panel: panel supply power not found, using dummy regulator [ 2.332422] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.342018] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.357516] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.367201] mmc2: new high speed SDHC card at address 0007 [ 2.374588] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.387156] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.393383] GPT:3014591 != 15564799 [ 2.396863] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.404275] GPT:3014591 != 15564799 [ 2.407785] GPT: Use GNU Parted to correct GPT errors. [ 2.412934] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.419945] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.426107] panel-simple panel: panel supply power not found, using dummy regulator [ 2.680047] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.694835] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.704320] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.710491] panel-simple panel: panel supply power not found, using dummy regulator [ 2.838078] EXT4-fs (mmcblk0p3): recovery complete [ 2.842866] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.851049] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.858037] devtmpfs: mounted [ 2.861445] Freeing unused kernel memory: 1024K [ 2.897744] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.903438] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.909537] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.914979] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.920449] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.925996] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.931654] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.937211] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.942964] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.948627] alloc_contig_range: [fbca3, fbca4) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.097563] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.756746] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.767738] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.773899] panel-simple panel: panel supply power not found, using dummy regulator [ 4.117563] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.305603] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.312347] scsi host0: usb-storage 1-1:1.0 [ 4.316951] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.323141] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.319154] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.327885] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.334107] panel-simple panel: panel supply power not found, using dummy regulator [ 5.525244] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) rtcwake -d rtc1 -m mem -s 3 [ 5.534108] sd 0:0:0:0: [sda] Write Protect is off [ 5.540283] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.546409] sd 0:0:0:0: [sda] No Caching mode page found [ 5.551753] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.580547] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.592811] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.616312] PM: suspend entry (deep) [ 5.619932] PM: Syncing filesystems ... done. [ 5.626032] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.634157] OOM killer disabled. [ 5.637377] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.645977] Suspending console(s) (use no_console_suspend to debug) [ 5.841609] Disabling non-boot CPUs ... [ 5.897670] IRQ17 no longer affine to CPU1 [ 6.018213] Entering suspend state LP1 [ 6.018238] Enabling non-boot CPUs ... [ 6.018955] CPU1 is up [ 6.019552] CPU2 is up [ 6.020203] CPU3 is up [ 6.061338] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.073549] mmc1: Switching to 3.3V signalling voltage failed [ 6.288067] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.618360] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.618576] panel-simple panel: panel supply power not found, using dummy regulator [ 6.657530] OOM killer enabled. [ 6.660659] Restarting tasks ... done. [ 6.665158] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.736213] PM: suspend entry (deep) [ 7.739801] PM: Syncing filesystems ... done. [ 7.745338] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.753424] OOM killer disabled. [ 7.756640] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.765226] Suspending console(s) (use no_console_suspend to debug) [ 7.951230] Disabling non-boot CPUs ... [ 8.117598] IRQ17 no longer affine to CPU3 [ 8.118107] Entering suspend state LP1 [ 8.118132] Enabling non-boot CPUs ... [ 8.118886] CPU1 is up [ 8.119495] CPU2 is up [ 8.120163] CPU3 is up [ 8.171683] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.183627] mmc1: Switching to 3.3V signalling voltage failed [ 8.397903] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.712845] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.713015] panel-simple panel: panel supply power not found, using dummy regulator [ 8.767403] OOM killer enabled. [ 8.770562] Restarting tasks ... done. [ 8.774863] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.837055] PM: suspend entry (deep) [ 9.840643] PM: Syncing filesystems ... done. [ 9.846354] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.854510] OOM killer disabled. [ 9.857748] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.866343] Suspending console(s) (use no_console_suspend to debug) [ 10.051013] Disabling non-boot CPUs ... [ 10.187597] IRQ17 no longer affine to CPU2 [ 10.248216] Entering suspend state LP1 [ 10.248241] Enabling non-boot CPUs ... [ 10.248998] CPU1 is up [ 10.249609] CPU2 is up [ 10.250277] CPU3 is up [ 10.301426] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.313711] mmc1: Switching to 3.3V signalling voltage failed [ 10.842576] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.842746] panel-simple panel: panel supply power not found, using dummy regulator [ 10.890328] OOM killer enabled. [ 10.893469] Restarting tasks ... done. [ 10.897778] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.967159] PM: suspend entry (deep) [ 11.970749] PM: Syncing filesystems ... done. [ 11.976453] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.984539] OOM killer disabled. [ 11.987771] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.996348] Suspending console(s) (use no_console_suspend to debug) [ 12.180915] Disabling non-boot CPUs ... [ 12.358050] Entering suspend state LP1 [ 12.358075] Enabling non-boot CPUs ... [ 12.358836] CPU1 is up [ 12.359429] CPU2 is up [ 12.360095] CPU3 is up [ 12.411618] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.423968] mmc1: Switching to 3.3V signalling voltage failed [ 12.637892] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.951315] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.951485] panel-simple panel: panel supply power not found, using dummy regulator [ 13.001824] OOM killer enabled. [ 13.004965] Restarting tasks ... done. [ 13.009237] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.075850] PM: suspend entry (deep) [ 14.079440] PM: Syncing filesystems ... done. [ 14.084893] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.092976] OOM killer disabled. [ 14.096193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.104785] Suspending console(s) (use no_console_suspend to debug) [ 14.291302] Disabling non-boot CPUs ... [ 14.467524] IRQ17 no longer affine to CPU3 [ 14.468037] Entering suspend state LP1 [ 14.468062] Enabling non-boot CPUs ... [ 14.468819] CPU1 is up [ 14.469433] CPU2 is up [ 14.470102] CPU3 is up [ 14.521464] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.533791] mmc1: Switching to 3.3V signalling voltage failed [ 15.061375] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.061542] panel-simple panel: panel supply power not found, using dummy regulator [ 15.109008] OOM killer enabled. [ 15.112137] Restarting tasks ... done. [ 15.116523] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.186947] PM: suspend entry (deep) [ 16.190538] PM: Syncing filesystems ... done. [ 16.196083] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.204231] OOM killer disabled. [ 16.207483] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.216121] Suspending console(s) (use no_console_suspend to debug) [ 16.401259] Disabling non-boot CPUs ... [ 16.517529] IRQ17 no longer affine to CPU2 [ 16.578005] Entering suspend state LP1 [ 16.578030] Enabling non-boot CPUs ... [ 16.578785] CPU1 is up [ 16.579379] CPU2 is up [ 16.580052] CPU3 is up [ 16.621500] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.633709] mmc1: Switching to 3.3V signalling voltage failed [ 17.668080] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.668252] panel-simple panel: panel supply power not found, using dummy regulator [ 17.715798] OOM killer enabled. [ 17.718964] Restarting tasks ... done. [ 17.723181] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.297299] PM: suspend entry (deep) [ 18.300900] PM: Syncing filesystems ... done. [ 18.306586] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.314757] OOM killer disabled. [ 18.317994] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.326582] Suspending console(s) (use no_console_suspend to debug) [ 18.511759] Disabling non-boot CPUs ... [ 18.667967] Entering suspend state LP1 [ 18.667992] Enabling non-boot CPUs ... [ 18.668753] CPU1 is up [ 18.669346] CPU2 is up [ 18.670018] CPU3 is up [ 18.711765] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.723895] mmc1: Switching to 3.3V signalling voltage failed [ 19.252803] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.252973] panel-simple panel: panel supply power not found, using dummy regulator [ 19.296345] OOM killer enabled. [ 19.299487] Restarting tasks ... done. [ 19.304006] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.387052] PM: suspend entry (deep) [ 20.390651] PM: Syncing filesystems ... done. [ 20.396333] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.404504] OOM killer disabled. [ 20.407740] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.416324] Suspending console(s) (use no_console_suspend to debug) [ 20.601081] Disabling non-boot CPUs ... [ 20.778032] Entering suspend state LP1 [ 20.778057] Enabling non-boot CPUs ... [ 20.778813] CPU1 is up [ 20.779421] CPU2 is up [ 20.780096] CPU3 is up [ 20.831327] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.843575] mmc1: Switching to 3.3V signalling voltage failed [ 21.371647] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.371819] panel-simple panel: panel supply power not found, using dummy regulator [ 21.415252] OOM killer enabled. [ 21.418413] Restarting tasks ... done. [ 21.422915] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.506701] PM: suspend entry (deep) [ 22.510299] PM: Syncing filesystems ... done. [ 22.515985] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.524174] OOM killer disabled. [ 22.527396] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.535984] Suspending console(s) (use no_console_suspend to debug) [ 22.721161] Disabling non-boot CPUs ... [ 22.917430] IRQ17 no longer affine to CPU3 [ 22.918018] Entering suspend state LP1 [ 22.918044] Enabling non-boot CPUs ... [ 22.918805] CPU1 is up [ 22.919416] CPU2 is up [ 22.920077] CPU3 is up [ 22.971328] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.983259] mmc1: Switching to 3.3V signalling voltage failed [ 23.197728] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.512227] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.512397] panel-simple panel: panel supply power not found, using dummy regulator [ 23.566848] OOM killer enabled. [ 23.570011] Restarting tasks ... done. [ 23.574255] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 24.646866] PM: suspend entry (deep) [ 24.650496] PM: Syncing filesystems ... done. [ 24.656158] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.664332] OOM killer disabled. [ 24.667568] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.676157] Suspending console(s) (use no_console_suspend to debug) [ 24.860788] Disabling non-boot CPUs ... [ 25.017908] Entering suspend state LP1 [ 25.017932] Enabling non-boot CPUs ... [ 25.018692] CPU1 is up [ 25.019284] CPU2 is up [ 25.019948] CPU3 is up [ 25.071278] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.083618] mmc1: Switching to 3.3V signalling voltage failed [ 25.612326] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.612495] panel-simple panel: panel supply power not found, using dummy regulator [ 25.655875] OOM killer enabled. [ 25.659017] Restarting tasks ... done. [ 25.663331] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE