U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.9 MiB/s done Bytes transferred = 6384624 (616bf0 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616bf0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180131-230376-g537659c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:03:05 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997464K/2096128K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007471] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016999] Switching to timer-based delay loop, resolution 1000ns [ 0.024238] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029223] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039970] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047938] Switching to timer-based delay loop, resolution 83ns [ 0.054404] Console: colour dummy device 80x30 [ 0.058353] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068663] pid_max: default: 32768 minimum: 301 [ 0.073740] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079848] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087687] CPU: Testing write buffer coherency: ok [ 0.092014] /cpus/cpu@0 missing clock-frequency property [ 0.097020] /cpus/cpu@1 missing clock-frequency property [ 0.102330] /cpus/cpu@2 missing clock-frequency property [ 0.107595] /cpus/cpu@3 missing clock-frequency property [ 0.112865] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152979] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157736] Hierarchical SRCU implementation. [ 0.173536] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193003] smp: Bringing up secondary CPUs ... [ 0.243555] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323667] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403782] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413433] smp: Brought up 1 node, 4 CPUs [ 0.432537] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438689] CPU: All CPU(s) started in SVC mode. [ 0.445138] devtmpfs: initialized [ 0.466167] Built 1 zonelists, mobility grouping on. Total pages: 515750 [ 0.471426] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488488] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.494875] pinctrl core: initialized pinctrl subsystem [ 0.501031] NET: Registered protocol family 16 [ 0.505461] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512523] cpuidle: using governor menu [ 0.537731] No ATAGs? [ 0.537867] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.546228] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.553998] iommu: Adding device 50000000.host1x to group 0 [ 0.557763] iommu: Adding device 54200000.dc to group 1 [ 0.562911] iommu: Adding device 54240000.dc to group 1 [ 0.568149] iommu: Adding device 57000000.gpu to group 2 [ 0.590457] +5V_SYS: supplied by +VDD_MUX [ 0.592958] +3.3V_SYS: supplied by +VDD_MUX [ 0.597512] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.602827] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.610953] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.616683] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.624912] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.631706] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.639899] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.645716] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.653939] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.659490] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.667718] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.673356] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.682791] vgaarb: loaded [ 0.684945] SCSI subsystem initialized [ 0.688135] libata version 3.00 loaded. [ 0.692033] usbcore: registered new interface driver usbfs [ 0.697256] usbcore: registered new interface driver hub [ 0.702561] usbcore: registered new device driver usb [ 0.710748] Linux video capture interface: v2.00 [ 0.713530] pps_core: LinuxPPS API ver. 1 registered [ 0.718417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.727533] PTP clock support registered [ 0.732837] Advanced Linux Sound Architecture Driver Initialized. [ 0.738123] Bluetooth: Core ver 2.22 [ 0.741068] NET: Registered protocol family 31 [ 0.745462] Bluetooth: HCI device and connection manager initialized [ 0.751767] Bluetooth: HCI socket layer initialized [ 0.756645] Bluetooth: L2CAP socket layer initialized [ 0.761676] Bluetooth: SCO socket layer initialized [ 0.767117] clocksource: Switched to clocksource arch_sys_counter [ 0.866032] NET: Registered protocol family 2 [ 0.869490] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.876171] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.883255] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.889740] TCP: Hash tables configured (established 8192 bind 8192) [ 0.896349] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.901824] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.908432] NET: Registered protocol family 1 [ 0.913125] RPC: Registered named UNIX socket transport module. [ 0.918343] RPC: Registered udp transport module. [ 0.922993] RPC: Registered tcp transport module. [ 0.927694] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.934699] PCI: CLS 0 bytes, default 64 [ 0.939817] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.947911] Initialise system trusted keyrings [ 0.950720] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.958369] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.973570] NFS: Registering the id_resolver key type [ 0.976722] Key type id_resolver registered [ 0.980904] Key type id_legacy registered [ 0.989808] Key type asymmetric registered [ 0.991994] Asymmetric key parser 'x509' registered [ 0.996980] bounce: pool size: 64 pages [ 1.000793] io scheduler noop registered (default) [ 1.005428] io scheduler mq-deadline registered [ 1.009955] io scheduler kyber registered [ 1.015744] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.020771] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.027794] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.043971] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.047816] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.057642] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.068321] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.075292] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.080925] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.088461] console [ttyS0] disabled [ 1.090172] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.099149] console [ttyS0] enabled [ 1.099149] console [ttyS0] enabled [ 1.105301] bootconsole [earlycon0] disabled [ 1.105301] bootconsole [earlycon0] disabled [ 1.114695] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.126106] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.154944] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.174749] loop: module loaded [ 1.179378] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.186813] as3722 4-0040: AS3722 with revision 0x1 found [ 1.199073] as3722-sd2: supplied by +5V_SYS [ 1.203748] as3722-sd3: supplied by +5V_SYS [ 1.208207] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.214578] as3722-sd4: supplied by +5V_SYS [ 1.219275] as3722-sd5: supplied by +5V_SYS [ 1.225372] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.231561] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.237824] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.243785] as3722-ldo3: supplied by +3.3V_SYS [ 1.248306] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.256106] as3722-ldo4: supplied by +3.3V_SYS [ 1.260808] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.267046] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.271921] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.278903] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.284556] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.290758] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.302055] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.320489] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.327416] libphy: Fixed MDIO Bus: probed [ 1.331510] CAN device driver interface [ 1.335391] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.342588] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.348327] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.355780] usbcore: registered new interface driver pegasus [ 1.361528] usbcore: registered new interface driver asix [ 1.366976] usbcore: registered new interface driver ax88179_178a [ 1.373139] usbcore: registered new interface driver cdc_ether [ 1.379053] usbcore: registered new interface driver smsc75xx [ 1.384861] usbcore: registered new interface driver smsc95xx [ 1.390671] usbcore: registered new interface driver net1080 [ 1.396374] usbcore: registered new interface driver cdc_subset [ 1.402358] usbcore: registered new interface driver zaurus [ 1.408009] usbcore: registered new interface driver cdc_ncm [ 1.413914] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.419564] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.425262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.431802] ehci-pci: EHCI PCI platform driver [ 1.436297] tegra-ehci: Tegra EHCI driver [ 1.443170] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.448610] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.456407] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.487148] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.493968] hub 1-0:1.0: USB hub found [ 1.497781] hub 1-0:1.0: 1 port detected [ 1.502954] usbcore: registered new interface driver cdc_acm [ 1.508626] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.516676] usbcore: registered new interface driver cdc_wdm [ 1.522429] usbcore: registered new interface driver usb-storage [ 1.536708] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.543602] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.551424] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.558631] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.565142] i2c /dev entries driver [ 1.569925] usbcore: registered new interface driver uvcvideo [ 1.575663] USB Video Class driver (1.1.1) [ 1.579777] gspca_main: v2.14.0 registered [ 1.584500] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.594830] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.603728] sdhci: Secure Digital Host Controller Interface driver [ 1.610051] sdhci: Copyright(c) Pierre Ossman [ 1.614403] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.620422] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.625314] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.646618] mmc0: Unknown controller version (3). You may experience problems. [ 1.653898] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.691031] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.699419] usbcore: registered new interface driver usbhid [ 1.705026] usbhid: USB HID core driver [ 1.749007] mmc0: new high speed MMC card at address 0001 [ 1.759706] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.769409] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.780443] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.786594] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.795764] mmcblk0: p1 [ 2.148532] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.168905] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.179786] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.191069] NET: Registered protocol family 10 [ 2.196959] Segment Routing with IPv6 [ 2.200821] mip6: Mobile IPv6 [ 2.203790] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.211220] NET: Registered protocol family 17 [ 2.215676] NET: Registered protocol family 15 [ 2.220178] can: controller area network core (rev 20170425 abi 9) [ 2.226572] NET: Registered protocol family 29 [ 2.231031] can: raw protocol (rev 20170425) [ 2.235297] can: broadcast manager protocol (rev 20170425 t) [ 2.240972] can: netlink gateway (rev 20170425) max_hops=1 [ 2.246635] Bluetooth: RFCOMM socket layer initialized [ 2.251848] Bluetooth: RFCOMM ver 1.11 [ 2.255616] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.260945] Bluetooth: BNEP socket layer initialized [ 2.265903] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.271838] Bluetooth: HIDP socket layer initialized [ 2.277008] Key type dns_resolver registered [ 2.281832] Registering SWP/SWPB emulation handler [ 2.287477] Loading compiled-in X.509 certificates [ 2.311977] +3.3V_RUN: supplied by +3.3V_SYS [ 2.317013] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.321859] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.327851] +5V_USB_HS: supplied by +5V_SYS [ 2.333009] +3.3V_LP0: supplied by +3.3V_SYS [ 2.338532] +5V_HDMI_CON: supplied by +5V_SYS [ 2.343318] +5V_SATA: supplied by +5V_SYS [ 2.347916] +12V_SATA: supplied by +VDD_MUX [ 2.353516] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.360384] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.367467] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.374934] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.380574] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.389736] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.399034] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.407432] as3722-sd2: supplied by +5V_SYS [ 2.411926] as3722-sd3: supplied by +5V_SYS [ 2.416408] as3722-sd4: supplied by +5V_SYS [ 2.421102] as3722-sd5: supplied by +5V_SYS [ 2.426798] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.432567] as3722-ldo1: supplied by +3.3V_RUN [ 2.437363] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.443031] as3722-ldo3: supplied by +3.3V_SYS [ 2.448674] as3722-ldo4: supplied by +3.3V_SYS [ 2.453420] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.459324] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.467975] as3722-ldo6: supplied by +3.3V_RUN [ 2.472971] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.478392] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.485471] as3722-ldo9: supplied by +5V_SYS [ 2.490975] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.497706] as3722-ldo10: supplied by +5V_SYS [ 2.502815] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.509676] as3722-ldo11: supplied by +3.3V_RUN [ 2.514959] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.524311] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.533391] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.543924] scsi host0: tegra-ahci [ 2.548065] scsi host1: tegra-ahci [ 2.551775] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.559820] ata2: DUMMY [ 2.563573] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.569054] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.576889] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.607248] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.614358] hub 2-0:1.0: USB hub found [ 2.618242] hub 2-0:1.0: 1 port detected [ 2.697922] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.705348] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.710796] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 2.720916] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.729598] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 2.736965] hub 3-0:1.0: USB hub found [ 2.740844] hub 3-0:1.0: 6 ports detected [ 2.745729] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.751199] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 2.758957] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.768171] hub 4-0:1.0: USB hub found [ 2.771992] hub 4-0:1.0: 2 ports detected [ 2.777769] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.782701] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.796025] mmc1: Unknown controller version (3). You may experience problems. [ 2.803410] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.840482] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.848252] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.856086] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.863930] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.888678] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.890299] ata1: SATA link down (SStatus 0 SControl 300) [ 2.896978] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.912125] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.918435] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.924667] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.931614] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.938977] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.944508] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.950578] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.960295] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.970024] pci 0000:00:01.0: enabling Extended Tags [ 2.974987] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.984796] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.994633] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.001304] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.011331] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.017410] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.027223] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.036994] pci 0000:00:02.0: enabling Extended Tags [ 3.042001] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.051816] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.061658] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.068332] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.078382] PCI: bus0: Fast back to back transfers disabled [ 3.083997] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.092077] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.100366] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.106517] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.113596] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.131436] mmc1: new high speed SDHC card at address aaaa [ 3.142256] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.147211] PCI: bus1: Fast back to back transfers disabled [ 3.152795] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.159983] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.166366] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.172159] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.179139] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.186671] pci 0000:02:00.0: supports D1 D2 [ 3.191195] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.201652] mmcblk1: p1 p2 p3 [ 3.227321] PCI: bus2: Fast back to back transfers disabled [ 3.232901] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.239594] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.246377] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.253206] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.260961] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.267057] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.274400] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.279382] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.286177] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.293947] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.301284] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.307396] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.312358] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.318466] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.325248] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.333029] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.340153] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.346547] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.352494] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.359571] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.365931] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.372076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.377711] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.408987] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x916e758d, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.418664] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.430873] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.440040] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.446666] [drm] No driver support for vblank timestamp query. [ 3.585915] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.748929] Console: switching to colour frame buffer device 512x135 [ 3.845055] drm drm: fb0: frame buffer device [ 3.849721] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.857146] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.864470] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.873517] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.880931] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:57 UTC (946684917) [ 3.889686] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.899283] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.905938] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.914612] cfg80211: failed to load regulatory.db [ 3.915032] +USB0_VBUS_SW: disabling [ 3.923005] +1.8V_RUN_CAM: disabling [ 3.926693] +2.8V_RUN_CAM: disabling [ 3.930541] +1.2V_RUN_CAM_FRONT: disabling [ 3.934898] +1.05V_RUN_CAM_REAR: disabling [ 3.939267] +3.3V_RUN_TOUCH: disabling [ 3.943281] +2.8V_RUN_CAM_AF: disabling [ 3.947506] +1.8V_RUN_VPP_FUSE: disabling [ 3.951684] ALSA device list: [ 3.954647] #0: tegra-hda at 0x70038000 irq 346 [ 3.959370] #1: NVIDIA Tegra Jetson TK1 [ 3.964322] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.018992] EXT4-fs (mmcblk0p1): recovery complete [ 4.025038] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.033326] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.044348] devtmpfs: mounted [ 4.047849] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#