Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.165990445 -0800
+++ /tmp/foob	2018-01-30 22:19:28.165990445 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 30 22:09:13 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -27,7 +27,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA32
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998256K/1048576K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 33936K reserved, 16384K cma-reserved)
+Memory: 998124K/1048576K available (9916K kernel code, 1244K rwdata, 4628K rodata, 1152K init, 404K bss, 34068K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -57,7 +57,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 253660
+Built 1 zonelists, mobility grouping on.  Total pages: 253627
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -65,9 +65,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000055e65eee, 1 data @ 0000000042f9f0af)
+vdso: 2 pages (1 code @ 00000000a9bf8b2c, 1 data @ 0000000035eb8c8b)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -136,6 +136,8 @@
 msm_serial: driver initialized
 cacheinfo: Unable to detect cache hierarchy for CPU 0
 loop: module loaded
+virtio_blk virtio0: [vda] 6291456 512-byte logical blocks (3.22 GB/3.00 GiB)
+ vda: vda1 vda2
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
 thunder_xcv, ver 1.0
@@ -174,9 +176,16 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-30 05:44:45 UTC (1517291085)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-31 06:16:21 UTC (1517379381)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
-Waiting for root device /dev/vda2...
-script "/home/jonathanh/workdir/tegra/epmt/test/testscripts/qemu-vexpress64_defc
\ No newline at end of file
+EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (vda2): recovery complete
+EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 254:2.
+devtmpfs: mounted
+Freeing unused kernel memory: 1152K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.217990676 -0800
+++ /tmp/foob	2018-01-30 22:19:28.217990676 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 3.4 MiB/s
+	 ####################################
+	 2.8 MiB/s
 done
-Bytes transferred = 8122880 (7bf200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3.3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7bf200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992580K/2096128K available (11264K kernel code, 1569K rwdata, 4336K rodata, 2048K init, 405K bss, 38012K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992580K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38012K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,7 +94,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1570 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -353,7 +353,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-22 12:39:29 UTC (961677569)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-23 13:09:57 UTC (961765797)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -365,4 +365,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.759211] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.769340] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.233990747 -0800
+++ /tmp/foob	2018-01-30 22:19:28.237990765 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.9 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6219008 (5ee500 hex)
+Bytes transferred = 6218640 (5ee390 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ee500 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ee390 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:02:18 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -289,8 +289,8 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmc0: new high speed SDHC card at address aaaa
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-22 12:36:55 UTC (961677415)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-23 13:07:13 UTC (961765633)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,4 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.396495] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.363057] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.269990908 -0800
+++ /tmp/foob	2018-01-30 22:19:28.273990926 -0800
@@ -34,10 +34,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 3.9 MiB/s
+	 ####################################
+	 3.8 MiB/s
 done
-Bytes transferred = 8122880 (7bf200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -48,7 +48,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7bf200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992472K/2096128K available (11264K kernel code, 1569K rwdata, 4336K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992472K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,7 +89,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1570 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -322,23 +322,23 @@
 +USB0_VBUS_SW: supplied by +5V_SYS
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
-mmc0: new high speed MMC card at address 0001
 +3.3V_LP0: supplied by +3.3V_SYS
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 +5V_HDMI_CON: supplied by +5V_SYS
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 +5V_SATA: supplied by +5V_SYS
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +12V_SATA: supplied by +VDD_MUX
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
- mmcblk0: p1
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
+mmc0: new high speed MMC card at address 0001
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+ mmcblk0: p1
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -396,10 +396,10 @@
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
 PCI: bus0: Fast back to back transfers disabled
@@ -443,7 +443,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf9a865c2, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x0e017d5b, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -455,7 +455,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:13 UTC (946685053)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:11 UTC (946685051)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.289990997 -0800
+++ /tmp/foob	2018-01-30 22:19:28.293991015 -0800
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 4 MiB/s
+	 3.8 MiB/s
 done
-Bytes transferred = 6219008 (5ee500 hex)
+Bytes transferred = 6218640 (5ee390 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ee500 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ee390 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:02:18 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x413f9378, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x8ef8ab92, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -454,8 +454,8 @@
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-+USB0_VBUS_SW: disabling
 cfg80211: failed to load regulatory.db
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.321991140 -0800
+++ /tmp/foob	2018-01-30 22:19:28.321991140 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.2 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6385112 (616dd8 hex)
+Bytes transferred = 6384624 (616bf0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.3 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x616dd8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616bf0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:34:32 PST 2018
+Linux version 4.15.0-next-20180131-230376-g537659c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:03:05 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -382,8 +382,8 @@
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
-tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
@@ -446,7 +446,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xb12e58a0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x916e758d, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -458,12 +458,12 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:59 UTC (946684919)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:57 UTC (946684917)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-+USB0_VBUS_SW: disabling
 cfg80211: failed to load regulatory.db
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.337991211 -0800
+++ /tmp/foob	2018-01-30 22:19:28.341991228 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,21 +42,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 3.2 MiB/s
+	 ####################################
+	 3.3 MiB/s
 done
-Bytes transferred = 8122880 (7bf200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7bf200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993488K/2097148K available (11264K kernel code, 1569K rwdata, 4336K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993488K/2097148K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1570 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -323,24 +323,24 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmc0: new high speed MMC card at address 0001
 +5V_VDD_TS_SW: supplied by +5V_SYS
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +5V_USB_HS: supplied by +5V_SYS
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +5V_USB_SS: supplied by +5V_SYS
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +3.3V_PANEL: supplied by +3.3V_RUN
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 elan_i2c 1-0015: failed to read report data: -121
@@ -359,13 +359,14 @@
 mmc2: Unknown controller version (3). You may experience problems.
 elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
 tegra-sor 54540000.sor: failed to probe output: -517
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:07:11 UTC (946685231)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -383,8 +384,12 @@
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-mmc1: new high speed SDIO card at address 0001
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -395,11 +400,6 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-EXT4-fs (mmcblk0p3): recovery complete
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.353991283 -0800
+++ /tmp/foob	2018-01-30 22:19:28.357991299 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,18 +43,18 @@
 	 ##################################
 	 3.3 MiB/s
 done
-Bytes transferred = 6219008 (5ee500 hex)
+Bytes transferred = 6218640 (5ee390 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ee500 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ee390 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:02:18 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -390,10 +390,11 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 panel-simple panel: panel supply power not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+panel-simple panel: panel supply power not found, using dummy regulator
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.373991371 -0800
+++ /tmp/foob	2018-01-30 22:19:28.377991389 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -41,9 +41,9 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.4 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6385112 (616dd8 hex)
+Bytes transferred = 6384624 (616bf0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -54,7 +54,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x616dd8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616bf0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:34:32 PST 2018
+Linux version 4.15.0-next-20180131-230376-g537659c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:03:05 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -368,13 +368,13 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:54 UTC (946684974)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +3.3V_AVDD_HDMI_AP_GATED: disabling
-+1.8V_RUN_CAM: disabling
 cfg80211: failed to load regulatory.db
++1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
@@ -388,9 +388,9 @@
 ALSA device list:
   #1: GoogleNyanBig
 tegra-sor 54540000.sor: failed to probe output: -517
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 panel-simple panel: panel supply power not found, using dummy regulator
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
@@ -411,9 +411,7 @@
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    2.918399] alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
@@ -423,4 +421,6 @@
 alloc_contig_range: [fbca1, fbca2) PFNs busy
 alloc_contig_range: [fbca2, fbca3) PFNs busy
 alloc_contig_range: [fbca3, fbca4) PFNs busy
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    3.077621] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.397991478 -0800
+++ /tmp/foob	2018-01-30 22:19:28.397991478 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801296 us
+Bootloader-Cpu Init at (time stamp): 1800964 us
 
 Pinmux changes applied in kernel way
 
@@ -60,25 +60,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801270  us
-Bootloader (AosInit) time: 733429 us
-Bootloader Main Init time: 180213 us
-BlockDevMgrInit time: 157543 us
+Miscellaneous avp time: 1800937  us
+Bootloader (AosInit) time: 734251 us
+Bootloader Main Init time: 180083 us
+BlockDevMgrInit time: 157533 us
 PartMgrInit time: 8 us
-StorMgrInit time: 31 us
-FsMgrInit time: 2 us
-Partition Table load: 77099 us 
-Display init time: 574423 us
-Kernel read time: 1567 msec
-Load Kernel Size:   20760576 Bytes
-Bl Kernel ReadSpeed: 13248000 Bytes/sec
-Pre-Kernel Jump time: 4385438 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9570419 us
+StorMgrInit time: 30 us
+FsMgrInit time: 3 us
+Partition Table load: 76691 us 
+Display init time: 574789 us
+Kernel read time: 1577 msec
+Load Kernel Size:   20895744 Bytes
+Bl Kernel ReadSpeed: 13250000 Bytes/sec
+Pre-Kernel Jump time: 4410471 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9606731 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 30 22:09:13 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -101,7 +101,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA32
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1705372K/1775616K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 53860K reserved, 16384K cma-reserved)
+Memory: 1705240K/1775616K available (9916K kernel code, 1244K rwdata, 4628K rodata, 1152K init, 404K bss, 53992K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -132,7 +132,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 430439
+Built 1 zonelists, mobility grouping on.  Total pages: 430406
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -142,7 +142,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000e6f90302, 1 data @ 000000004216b5d4)
+vdso: 2 pages (1 code @ 000000004a8f2ff8, 1 data @ 00000000f1dd4229)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -260,8 +260,8 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 NET: Registered protocol family 17
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 9pnet: Installing 9P2000 support
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 Key type dns_resolver registered
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.409991531 -0800
+++ /tmp/foob	2018-01-30 22:19:28.413991549 -0800
@@ -2,14 +2,14 @@
 
 Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.82 sec
+	Execution Time 56.96 sec
 	Percent passed so far: 50.0
 	
 
 
 Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 56.17 sec
+	Execution Time 56.16 sec
 	Percent passed so far: 100.0
 	
 
@@ -97,8 +97,8 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
-I> Updated LSR_DVCOMP_PARAMS: 0xc0801005c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0760ec5c
+I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -269,7 +269,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 28333308 bytes
+I> Total write size is 28427516 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -299,7 +299,7 @@
 I> Total write size is 20848 bytes
 I> Write successful.
 I> Writing kernel partition
-I> Total write size is 6733824 bytes
+I> Total write size is 6735872 bytes
 I> Write successful.
 I> Writing kernel-dtb partition
 I> Total write size is 248128 bytes
@@ -519,20 +519,20 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
-I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6265205) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9975
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139469
+I> add_serialno: Serial Num = 0320817136374
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2708/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136374 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:56:d9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:56:da
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:56:db
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -573,7 +573,13 @@
 Model: NVIDIA P2771-0000-500
 DRAM:  7.8 GiB
 MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   eth0: ethernet@2490000
+Hit any key to stop autoboot:  2 [0000.182] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -775,24 +781,24 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
+I> Checking boot.img header magic ... [0001.776] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.793] I> Done
+I> Move ramdisk (len: 6265205) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9975
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139469
+I> add_serialno: Serial Num = 0320817136374
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2708/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136374 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:56:d9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:56:da
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:56:db
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -841,23 +847,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 1
+mmc_init: -123, time 0
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 74 ms (4.9 KiB/s)
+431 bytes read in 66 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6264556 bytes read in 202 ms (29.6 MiB/s)
+6265205 bytes read in 205 ms (29.1 MiB/s)
 Retrieving file: /boot/Image
-17394176 bytes read in 463 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot,nolock,nfsvers=2 rootwait
+17529344 bytes read in 466 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2708/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 57 ms (402.3 KiB/s)
+23528 bytes read in 61 ms (376 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -978,47 +984,48 @@
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
+max77686-rtc max77620-rtc: setting system clock to 2016-12-11 06:14:45 UTC (1481436885)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 86:47:e4:3b:f4:51
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
+dwmac4: Master AXI performs any burst length
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmc2: new high speed MMC card at address 0001
-max77686-rtc max77620-rtc: setting system clock to 2016-12-10 05:46:52 UTC (1481348812)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 6e:e4:cb:39:0d:46
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
-dwmac4: Master AXI performs any burst length
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
-WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+WARNING: CPU: 4 PID: 81 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S               4.15.0-next-20180130-348510-gadbc9f27e641 #1
+CPU: 4 PID: 81 Comm: kworker/u12:3 Tainted: G S               4.15.0-next-20180131-230376-g537659c #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 IP-Config: Complete:
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009fa3ab0
-     device=eth0, hwaddr=6e:e4:cb:39:0d:46, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-x29: ffff000009fa3ab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fffda8 
+     device=eth0, hwaddr=86:47:e4:3b:f4:51, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+sp : ffff00000a07bab0
+x29: ffff00000a07bab0 x28: ffff8001f7808070 
+x27: ffff8001f7808020 
      host=192.168.99.2, domain=, nis-domain=(none)
+x26: ffff00000901fda8 
 x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4de4878 
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+x23: ffff8001f4c48878 
 x22: 0000000000000080 
-x21: ffff000009fa3b58 x20: ffff000008fe9000 
-x19: ffff000009fa3bd8 x18: 0000000000000000 
-x17: 000000005133532a x16: 000000009134f0e0 
-x15: 0000000075a6474d x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff976e0 
-x7 : ffff00000c820000 x6 : ffff000009fa3b68 
+x21: ffff00000a07bb58 x20: ffff000009009000 
+x19: ffff00000a07bbd8 x18: 0000000000000000 
+x17: 0000000051632961 x16: 000000006dc400ae 
+x15: 00000000a4b60111 x14: 00000000000c8000 
+x13: 00000000000079de x12: 00000000000079de 
+x11: ffffffffffffffff x10: 0000000000000000 
+x9 : 00000000ffffffff x8 : ffff8001fff4f6e0 
+x7 : ffff00000c380000 x6 : ffff00000a07bb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009fa3bc0 x2 : 0000000000000080 
-x1 : ffff000009fa3b68 x0 : ffff8001f65abc18 
+x3 : ffff00000a07bbc0 x2 : 0000000000000080 
+x1 : ffff00000a07bb68 x0 : ffff8001f6581a18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1035,31 +1042,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace c933c4e5b4aba23b ]---
-WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace 3208f57b8ed6e517 ]---
+WARNING: CPU: 4 PID: 81 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S      W        4.15.0-next-20180130-348510-gadbc9f27e641 #1
+CPU: 4 PID: 81 Comm: kworker/u12:3 Tainted: G S      W        4.15.0-next-20180131-230376-g537659c #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009fa3a40
-x29: ffff000009fa3a40 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fffda8 
+sp : ffff00000a07ba40
+x29: ffff00000a07ba40 x28: ffff8001f7808070 
+x27: ffff8001f7808020 x26: ffff00000901fda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009fa3ae8 x20: ffff000008fe9000 
-x19: ffff000009fa3b68 x18: 0000000000000000 
-x17: 000000005133532a x16: 000000009134f0e0 
-x15: 0000000075a6474d x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff976e0 
-x7 : ffff00000c820000 x6 : ffff000009fa3af8 
+x21: ffff00000a07bae8 x20: ffff000009009000 
+x19: ffff00000a07bb68 x18: 0000000000000000 
+x17: 0000000051632961 x16: 000000006dc400ae 
+x15: 00000000a4b60111 x14: 00000000000c8000 
+x13: 00000000000079de x12: 00000000000079de 
+x11: ffffffffffffffff x10: 0000000000000000 
+x9 : 00000000ffffffff x8 : ffff8001fff4f6e0 
+x7 : ffff00000c380000 x6 : ffff00000a07baf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009fa3b50 x2 : 0000000000000080 
-x1 : ffff000009fa3af8 x0 : ffff8001f65abc18 
+x3 : ffff00000a07bb50 x2 : 0000000000000080 
+x1 : ffff00000a07baf8 x0 : ffff8001f6581a18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1076,7 +1083,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace c933c4e5b4aba23c ]---
+---[ end trace 3208f57b8ed6e518 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1087,7 +1094,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sat Dec 10 05:46:57 UTC 2016
+L4T-INITRD Build DATE: Sun Dec 11 06:14:50 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1099,105 +1106,105 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Reached target Swap.
-Reached target Swap.
-systemd[1]: Listening on udev Control Socket.
-Listening on udev Control Socket.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Listening on Journal Socket (/dev/log).
+Listening on Journal Socket (/dev/log).
+systemd[1]: Reached target Encrypted Volumes.
+Reached target Encrypted Volumes.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Dispatch Password Requests to Console Directory Watch.
 systemd[1]: Created slice System Slice.
 Created slice System Slice.
 systemd[1]: Created slice system-getty.slice.
 Created slice system-getty.slice.
-systemd[1]: Listening on Journal Socket.
+systemd[1]: Listening on udev Kernel Socket.
+Listening on udev Kernel Socket.
+Created slice system-serial\x2dgetty.slice.
+Listening on Syslog Socket.
 Listening on Journal Socket.
-systemd[1]: Mounting RPC Pipe File System...
+         Starting Remount Root and Kernel File Systems...
+         Starting Load Kernel Modules...
          Mounting RPC Pipe File System...
-systemd[1]: Mounting POSIX Message Queue File System...
+         Mounting Huge Pages File System...
+Reached target Swap.
          Mounting POSIX Message Queue File System...
+Listening on /dev/initctl Compatibility Named Pipe.
          Starting Create Static Device Nodes in /dev...
-         Mounting Huge Pages File System...
-Listening on Journal Audit Socket.
 Created slice User and Session Slice.
-Reached target Slices.
-Created slice system-serial\x2dgetty.slice.
-         Starting Load Kernel Modules...
-Listening on Journal Socket (/dev/log).
-         Mounting Debug File System...
-Listening on Syslog Socket.
 Started Forward Password Requests to Wall Directory Watch.
-Listening on /dev/initctl Compatibility Named Pipe.
-Listening on udev Kernel Socket.
-Reached target Encrypted Volumes.
-         Starting Remount Root and Kernel File Systems...
-         Starting Journal Service...
-Started Dispatch Password Requests to Console Directory Watch.
 Reached target Paths.
+         Mounting Debug File System...
+Reached target Slices.
+Listening on udev Control Socket.
+         Starting Journal Service...
 Mounted Debug File System.
-Mounted POSIX Message Queue File System.
 Mounted Huge Pages File System.
+Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
-Started Create Static Device Nodes in /dev.
-Started Load Kernel Modules.
 Started Remount Root and Kernel File Systems.
-         Starting Load/Save Random Seed...
-         Starting udev Coldplug all Devices...
-         Starting Apply Kernel Variables...
+Started Load Kernel Modules.
          Mounting Configuration File System...
+         Starting Apply Kernel Variables...
+         Starting udev Coldplug all Devices...
+         Starting Load/Save Random Seed...
+Mounted Configuration File System.
+Started Journal Service.
+         Starting Flush Journal to Persistent Storage...
+Started Create Static Device Nodes in /dev.
+Started Load/Save Random Seed.
+Started Apply Kernel Variables.
+systemd-journald[1536]: Received request to flush runtime journal from PID 1
          Starting udev Kernel Device Manager...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
+         Starting Raise network interfaces...
          Starting Preprocess NFS configuration...
          Starting Set console keymap...
-Mounted Configuration File System.
-Started Journal Service.
-Failed to start Set console keymap.
-See 'systemctl status console-setup.service' for details.
-         Starting Flush Journal to Persistent Storage...
-Started Load/Save Random Seed.
-systemd-journald[1512]: Received request to flush runtime journal from PID 1
 Started Flush Journal to Persistent Storage.
 Started udev Coldplug all Devices.
+Failed to start Set console keymap.
+See 'systemctl status console-setup.service' for details.
          Starting Create Volatile Files and Directories...
-Started Apply Kernel Variables.
 Started Preprocess NFS configuration.
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
-         Starting Raise network interfaces...
 Started udev Kernel Device Manager.
-Found device /dev/ttyS0.
 Started Create Volatile Files and Directories.
+         Starting Update UTMP about System Boot/Shutdown...
+Reached target System Time Synchronized.
+Found device /dev/ttyS0.
+Started Update UTMP about System Boot/Shutdown.
 Started Raise network interfaces.
 Reached target Network.
 Reached target Network is Online.
-Reached target System Time Synchronized.
-         Starting Update UTMP about System Boot/Shutdown...
-Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Listening on RPCbind Server Activation Socket.
 Listening on D-Bus System Message Bus Socket.
+Started Daily apt activities.
+Listening on RPCbind Server Activation Socket.
 Reached target Sockets.
 Reached target Basic System.
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting /etc/rc.local Compatibility...
+         Starting OpenBSD Secure Shell server...
          Starting Permit User Sessions...
          Starting System Logging Service...
-         Starting OpenBSD Secure Shell server...
-         Starting /etc/rc.local Compatibility...
 Started Regular background program processing daemon.
-Started Daily Cleanup of Temporary Directories.
-Started Daily apt activities.
-Reached target Timers.
+Started D-Bus System Message Bus.
          Starting LSB: Start NTP daemon...
          Starting Login Service...
-Started D-Bus System Message Bus.
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started Daily Cleanup of Temporary Directories.
+Reached target Timers.
 Started System Logging Service.
-Started Permit User Sessions.
 Started /etc/rc.local Compatibility.
-Started Serial Getty on ttyS0.
+Started Permit User Sessions.
 Started Getty on tty1.
+Started Serial Getty on ttyS0.
 Reached target Login Prompts.
-Started OpenBSD Secure Shell server.
-Started Login Service.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Login Service.
+Started OpenBSD Secure Shell server.
 Started LSB: Start NTP daemon.
 Reached target Multi-User System.
 Reached target Graphical Interface.
@@ -1206,7 +1213,7 @@
 

 Ubuntu 16.04 LTS tegra-ubuntu ttyS0
 
-tegra-ubuntu login: [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+tegra-ubuntu login: [0000.182] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -1408,24 +1415,24 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
+I> Checking boot.img header magic ... [0001.777] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.794] I> Done
+I> Move ramdisk (len: 6265205) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9975
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139469
+I> add_serialno: Serial Num = 0320817136374
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2708/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136374 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:56:d9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:56:da
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:56:db
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -1480,17 +1487,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 74 ms (4.9 KiB/s)
+431 bytes read in 65 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6264556 bytes read in 201 ms (29.7 MiB/s)
+6265205 bytes read in 206 ms (29 MiB/s)
 Retrieving file: /boot/Image
-17394176 bytes read in 462 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot,nolock,nfsvers=2 rootwait
+17529344 bytes read in 466 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2708/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 56 ms (410.2 KiB/s)
+23528 bytes read in 61 ms (376 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -1612,9 +1619,9 @@
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 mmc2: new high speed MMC card at address 0001
-max77686-rtc max77620-rtc: setting system clock to 2016-12-10 05:47:54 UTC (1481348874)
+max77686-rtc max77620-rtc: setting system clock to 2016-12-11 06:15:48 UTC (1481436948)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address ca:c0:be:a6:28:3e
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 42:85:e9:33:20:6e
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
@@ -1623,36 +1630,35 @@
 dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
 dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
-WARNING: CPU: 4 PID: 86 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+WARNING: CPU: 5 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 86 Comm: kworker/u12:4 Tainted: G S               4.15.0-next-20180130-348510-gadbc9f27e641 #1
+CPU: 5 PID: 51 Comm: kworker/u12:3 Tainted: G S               4.15.0-next-20180131-230376-g537659c #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 IP-Config: Complete:
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-     device=eth0, hwaddr=ca:c0:be:a6:28:3e, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-sp : ffff00000a05bab0
-x29: ffff00000a05bab0 x28: 0000000000000000 
-x27: ffff000009fa3ce8 
+     device=eth0, hwaddr=42:85:e9:33:20:6e, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+sp : ffff000009febab0
+x29: ffff000009febab0 x28: 0000000000000000 
      host=192.168.99.2, domain=, nis-domain=(none)
-x26: ffff000008fffda8 
-x25: 0000000000000000 x24: 0000000000000001 
+x27: ffff000009fc3ce8 x26: ffff00000901fda8 
+x25: 0000000000000000 
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x23: ffff8001f5dac878 
-x22: 0000000000000080 
-x21: ffff00000a05bb58 x20: ffff000008fe9000 
-x19: ffff00000a05bbd8 x18: 0000000000000007 
+x24: 0000000000000001 
+x23: ffff8001f4f8c878 x22: 0000000000000080 
+x21: ffff000009febb58 x20: ffff000009009000 
+x19: ffff000009febbd8 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 00000000ffffff80 x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 00000000000079de x12: 00000000000079de 
 x11: ffffffffffffffff x10: 0000000000000003 
 x9 : 00000000ffffffff x8 : ffff8001fff976e0 
-x7 : ffff00000ca30000 x6 : ffff00000a05bb68 
+x7 : ffff00000c930000 x6 : ffff000009febb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff00000a05bbc0 x2 : 0000000000000080 
-x1 : ffff00000a05bb68 x0 : ffff8001f656fa18 
+x3 : ffff000009febbc0 x2 : 0000000000000080 
+x1 : ffff000009febb68 x0 : ffff8001f6593c18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1669,31 +1675,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 88ef5e97ef1e3128 ]---
-WARNING: CPU: 4 PID: 86 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace f756172cab879041 ]---
+WARNING: CPU: 5 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 86 Comm: kworker/u12:4 Tainted: G S      W        4.15.0-next-20180130-348510-gadbc9f27e641 #1
+CPU: 5 PID: 51 Comm: kworker/u12:3 Tainted: G S      W        4.15.0-next-20180131-230376-g537659c #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff00000a05ba40
-x29: ffff00000a05ba40 x28: 0000000000000000 
-x27: ffff000009fa3ce8 x26: ffff000008fffda8 
+sp : ffff000009feba40
+x29: ffff000009feba40 x28: 0000000000000000 
+x27: ffff000009fc3ce8 x26: ffff00000901fda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff00000a05bae8 x20: ffff000008fe9000 
-x19: ffff00000a05bb68 x18: 0000000000000007 
+x21: ffff000009febae8 x20: ffff000009009000 
+x19: ffff000009febb68 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 00000000ffffff80 x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 00000000000079de x12: 00000000000079de 
 x11: ffffffffffffffff x10: 0000000000000003 
 x9 : 00000000ffffffff x8 : ffff8001fff976e0 
-x7 : ffff00000ca30000 x6 : ffff00000a05baf8 
+x7 : ffff00000c930000 x6 : ffff000009febaf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff00000a05bb50 x2 : 0000000000000080 
-x1 : ffff00000a05baf8 x0 : ffff8001f656fa18 
+x3 : ffff000009febb50 x2 : 0000000000000080 
+x1 : ffff000009febaf8 x0 : ffff8001f6593c18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1710,7 +1716,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 88ef5e97ef1e3129 ]---
+---[ end trace f756172cab879042 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1721,7 +1727,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sat Dec 10 05:47:59 UTC 2016
+L4T-INITRD Build DATE: Sun Dec 11 06:15:53 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1733,101 +1739,101 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Created slice System Slice.
+Created slice System Slice.
+systemd[1]: Created slice system-getty.slice.
+Created slice system-getty.slice.
+systemd[1]: Created slice User and Session Slice.
+Created slice User and Session Slice.
 systemd[1]: Reached target Encrypted Volumes.
 Reached target Encrypted Volumes.
+systemd[1]: Reached target Slices.
+Reached target Slices.
 systemd[1]: Listening on udev Kernel Socket.
 Listening on udev Kernel Socket.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
-systemd[1]: Reached target Swap.
+Listening on Journal Socket.
+         Starting Remount Root and Kernel File Systems...
+         Mounting Debug File System...
+Created slice system-serial\x2dgetty.slice.
+         Starting Load Kernel Modules...
+         Mounting POSIX Message Queue File System...
 Reached target Swap.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-systemd[1]: Started Forward Password Requests to Wall Directory Watch.
 Started Forward Password Requests to Wall Directory Watch.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+         Mounting RPC Pipe File System...
+Listening on Journal Socket (/dev/log).
 Started Dispatch Password Requests to Console Directory Watch.
 Reached target Paths.
 Listening on /dev/initctl Compatibility Named Pipe.
-Created slice System Slice.
-Created slice system-serial\x2dgetty.slice.
-Created slice system-getty.slice.
-Reached target Slices.
-Listening on Syslog Socket.
-Listening on Journal Socket.
-         Mounting RPC Pipe File System...
-         Mounting POSIX Message Queue File System...
-         Starting Load Kernel Modules...
-         Starting Remount Root and Kernel File Systems...
-         Mounting Debug File System...
-         Mounting Huge Pages File System...
          Starting Create Static Device Nodes in /dev...
-Listening on Journal Socket (/dev/log).
-         Starting Journal Service...
 Listening on udev Control Socket.
+Listening on Syslog Socket.
+         Starting Journal Service...
+         Mounting Huge Pages File System...
 Mounted Debug File System.
-Mounted POSIX Message Queue File System.
 Mounted Huge Pages File System.
+Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
-Started Load Kernel Modules.
 Started Remount Root and Kernel File Systems.
+Started Load Kernel Modules.
 Started Create Static Device Nodes in /dev.
 Started Journal Service.
          Starting udev Kernel Device Manager...
+         Mounting Configuration File System...
+         Starting Apply Kernel Variables...
+         Starting Load/Save Random Seed...
+         Starting Flush Journal to Persistent Storage...
          Starting udev Coldplug all Devices...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
-         Starting Preprocess NFS configuration...
          Starting Set console keymap...
-         Starting Flush Journal to Persistent Storage...
-         Starting Load/Save Random Seed...
-         Mounting Configuration File System...
-         Starting Apply Kernel Variables...
+         Starting Preprocess NFS configuration...
 Mounted Configuration File System.
-Started Preprocess NFS configuration.
+Started Apply Kernel Variables.
+Started Load/Save Random Seed.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-Started Load/Save Random Seed.
-Started Apply Kernel Variables.
+Started Preprocess NFS configuration.
 Started udev Kernel Device Manager.
-systemd-journald[1516]: Received request to flush runtime journal from PID 1
-Started Flush Journal to Persistent Storage.
-         Starting Create Volatile Files and Directories...
-         Starting Raise network interfaces...
+systemd-journald[1531]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
+         Starting Raise network interfaces...
+Started Flush Journal to Persistent Storage.
 Started udev Coldplug all Devices.
 Found device /dev/ttyS0.
-Started Create Volatile Files and Directories.
 Started Raise network interfaces.
 Reached target Network.
 Reached target Network is Online.
+         Starting Create Volatile Files and Directories...
+Started Create Volatile Files and Directories.
          Starting Update UTMP about System Boot/Shutdown...
 Reached target System Time Synchronized.
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Started Daily Cleanup of Temporary Directories.
-Started Daily apt activities.
-Reached target Timers.
-Listening on RPCbind Server Activation Socket.
 Listening on D-Bus System Message Bus Socket.
+Listening on RPCbind Server Activation Socket.
 Reached target Sockets.
 Reached target Basic System.
+         Starting System Logging Service...
          Starting Permit User Sessions...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
          Starting LSB: Start NTP daemon...
 Started Regular background program processing daemon.
-         Starting System Logging Service...
-         Starting OpenBSD Secure Shell server...
-         Starting /etc/rc.local Compatibility...
 Started D-Bus System Message Bus.
+Started Daily apt activities.
          Starting Login Service...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started Daily Cleanup of Temporary Directories.
+Reached target Timers.
+         Starting /etc/rc.local Compatibility...
+         Starting OpenBSD Secure Shell server...
 Started System Logging Service.
 Started Permit User Sessions.
 Started /etc/rc.local Compatibility.
-Started Getty on tty1.
 Started Serial Getty on ttyS0.
+Started Getty on tty1.
 Reached target Login Prompts.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
 Started Login Service.
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.437991656 -0800
+++ /tmp/foob	2018-01-30 22:19:28.441991674 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -47,10 +47,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 3.4 MiB/s
+	 ####################################
+	 4 MiB/s
 done
-Bytes transferred = 8122880 (7bf200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7bf200 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -91,7 +91,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953404K/1048576K available (11264K kernel code, 1569K rwdata, 4336K rodata, 2048K init, 405K bss, 29636K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953404K/1048576K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 29636K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,7 +101,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1570 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
@@ -270,7 +270,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x61a3cb43, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x4a59fa4c, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -346,13 +346,13 @@
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-mmc1: new high speed SD card at address b368
 hub 2-0:1.0: USB hub found
+mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
- mmcblk1: p1 p2
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+ mmcblk1: p1 p2
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.449991710 -0800
+++ /tmp/foob	2018-01-30 22:19:28.453991728 -0800
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 4.1 MiB/s
+	 3.7 MiB/s
 done
-Bytes transferred = 6219008 (5ee500 hex)
+Bytes transferred = 6218640 (5ee390 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ee500 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ee390 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:02:18 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x40bc1e62, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x84575651, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -343,16 +343,16 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
+hub 1-1:1.0: USB hub found
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
+hub 1-1:1.0: 4 ports detected
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 ALSA device list:
+cfg80211: failed to load regulatory.db
   #0: tegra-trimslice
 Waiting for root device PARTUUID=11eb23c1-01...
-cfg80211: failed to load regulatory.db
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.481991853 -0800
+++ /tmp/foob	2018-01-30 22:19:28.485991869 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 826721 us
-Basic modules init took 350363 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14372 us
-Carveout took 253273 us
-CPU initialization took 92444 us
-Total time taken by TegraBoot 710452 us
+Tegraboot started after 727040 us
+Basic modules init took 349085 us
+Sec Bootdevice Read Time = 204 ms, Read Size = 8459 KB
+Next stage binary read took 15533 us
+Carveout took 252671 us
+CPU initialization took 93149 us
+Total time taken by TegraBoot 710438 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.666] LPDDR4 Training: Number of tables = 10
+64b[0001.568] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17457664 bytes read in 876 ms (19 MiB/s)
+17527296 bytes read in 884 ms (18.9 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 497 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:37:56 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 30 22:06:32 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981676K/3131392K available (9852K kernel code, 1240K rwdata, 4744K rodata, 1152K init, 404K bss, 133332K reserved, 16384K cma-reserved)
+Memory: 2981608K/3131392K available (9916K kernel code, 1244K rwdata, 4764K rodata, 1152K init, 404K bss, 133400K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -213,7 +213,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749515
+Built 1 zonelists, mobility grouping on.  Total pages: 749498
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000eca4b8d6, 1 data @ 000000006677600c)
+vdso: 2 pages (1 code @ 000000007fb813df, 1 data @ 00000000396aba3a)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -259,7 +259,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a0c000
+kvm [1]: IDMAP page: 80a1e000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.489991887 -0800
+++ /tmp/foob	2018-01-30 22:19:28.493991905 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 759236 us
-Basic modules init took 349811 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14362 us
-Carveout took 252661 us
-CPU initialization took 92441 us
-Total time taken by TegraBoot 709275 us
+Tegraboot started after 749921 us
+Basic modules init took 348481 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14365 us
+Carveout took 253494 us
+CPU initialization took 92432 us
+Total time taken by TegraBoot 708772 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.599] LPDDR4 Training: Number of tables = 10
+64b[0001.589] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17261056 bytes read in 859 ms (19.2 MiB/s)
+17396224 bytes read in 859 ms (19.3 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44914 bytes read in 453 ms (96.7 KiB/s)
+44914 bytes read in 455 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 496 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 30 22:09:13 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981868K/3131392K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 133140K reserved, 16384K cma-reserved)
+Memory: 2981736K/3131392K available (9916K kernel code, 1244K rwdata, 4628K rodata, 1152K init, 404K bss, 133272K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -213,7 +213,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749563
+Built 1 zonelists, mobility grouping on.  Total pages: 749530
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000034c857fe, 1 data @ 000000001b37bbd5)
+vdso: 2 pages (1 code @ 000000008863994d, 1 data @ 000000004e3889f1)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -259,7 +259,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a04000
+kvm [1]: IDMAP page: 80a16000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.537992101 -0800
+++ /tmp/foob	2018-01-30 22:19:28.537992101 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 30 22:09:13 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -30,7 +30,7 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835016K/2988032K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 136632K reserved, 16384K cma-reserved)
+Memory: 2834884K/2988032K available (9916K kernel code, 1244K rwdata, 4628K rodata, 1152K init, 404K bss, 136764K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -89,7 +89,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 712850
+Built 1 zonelists, mobility grouping on.  Total pages: 712817
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -99,7 +99,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000011056157, 1 data @ 00000000dee8367f)
+vdso: 2 pages (1 code @ 00000000928ece51, 1 data @ 00000000f153ad05)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -142,7 +142,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a04000
+kvm [1]: IDMAP page: 80a16000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -256,7 +256,7 @@
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
-max77686-rtc max77620-rtc: setting system clock to 2001-11-10 11:07:19 UTC (1005390439)
+max77686-rtc max77620-rtc: setting system clock to 2001-11-11 11:39:01 UTC (1005478741)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 PP1200_AVDD: disabling
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.545992137 -0800
+++ /tmp/foob	2018-01-30 22:19:28.549992155 -0800
@@ -39,10 +39,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 2.9 MiB/s
+	 ####################################
+	 2.8 MiB/s
 done
-Bytes transferred = 8122880 (7bf200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7bf200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
+Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992508K/2096128K available (11264K kernel code, 1569K rwdata, 4336K rodata, 2048K init, 405K bss, 38084K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992508K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38084K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,7 +93,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1570 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -376,7 +376,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xa20a2469, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x29f97731, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -407,5 +407,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.094014] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.094036] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-30 22:19:28.561992208 -0800
+++ /tmp/foob	2018-01-30 22:19:28.565992226 -0800
@@ -40,18 +40,18 @@
 	 ##################################
 	 2.8 MiB/s
 done
-Bytes transferred = 6219008 (5ee500 hex)
+Bytes transferred = 6218640 (5ee390 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.6 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ee500 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ee390 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
+Linux version 4.15.0-next-20180131-28668-g537659c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 30 22:02:18 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf2dadb5d, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x094b3ecd, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.368565] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.358574] usb 2-1: new high-speed USB device number 2 using tegra-ehci
