U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.3 MiB/s done Bytes transferred = 8159744 (7c8200 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-next-20180131-348617-g537659c08a7d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 30 22:03:09 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632 [ 0.000000] pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993488K/2097148K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1571 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001903] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001910] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001918] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001922] Switching to timer-based delay loop, resolution 83ns [ 0.002142] Console: colour dummy device 80x30 [ 0.002158] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002165] pid_max: default: 32768 minimum: 301 [ 0.002211] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002216] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002423] CPU: Testing write buffer coherency: ok [ 0.002557] /cpus/cpu@0 missing clock-frequency property [ 0.002572] /cpus/cpu@1 missing clock-frequency property [ 0.002587] /cpus/cpu@2 missing clock-frequency property [ 0.002603] /cpus/cpu@3 missing clock-frequency property [ 0.002609] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002727] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003440] Hierarchical SRCU implementation. [ 0.004537] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004841] EFI services will not be available. [ 0.004906] smp: Bringing up secondary CPUs ... [ 0.005137] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012115] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022121] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031905] smp: Brought up 1 node, 4 CPUs [ 0.031912] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031916] CPU: All CPU(s) started in SVC mode. [ 0.032475] devtmpfs: initialized [ 0.037755] Built 1 zonelists, mobility grouping on. Total pages: 514756 [ 0.037911] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038148] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038243] pinctrl core: initialized pinctrl subsystem [ 0.038831] DMI not present or invalid. [ 0.038938] NET: Registered protocol family 16 [ 0.039637] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040570] cpuidle: using governor menu [ 0.048947] No ATAGs? [ 0.049000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049006] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051848] Serial: AMBA PL011 UART driver [ 0.052293] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052419] iommu: Adding device 50000000.host1x to group 0 [ 0.052447] iommu: Adding device 54200000.dc to group 1 [ 0.052469] iommu: Adding device 54240000.dc to group 1 [ 0.052503] iommu: Adding device 57000000.gpu to group 2 [ 0.057719] AT91: Could not find identification node [ 0.057925] +5V_SYS: supplied by +VDD_MUX [ 0.058028] +3.3V_SYS: supplied by +VDD_MUX [ 0.058240] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058246] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058280] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058285] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058318] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058323] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058355] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058360] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058446] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058451] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058483] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058488] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059477] vgaarb: loaded [ 0.059740] SCSI subsystem initialized [ 0.059811] libata version 3.00 loaded. [ 0.059885] usbcore: registered new interface driver usbfs [ 0.059903] usbcore: registered new interface driver hub [ 0.059924] usbcore: registered new device driver usb [ 0.061204] pps_core: LinuxPPS API ver. 1 registered [ 0.061208] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061217] PTP clock support registered [ 0.061282] EDAC MC: Ver: 3.0.0 [ 0.061730] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.061739] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062193] clocksource: Switched to clocksource arch_sys_counter [ 0.080636] NET: Registered protocol family 2 [ 0.080834] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.080845] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.080880] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.080942] TCP: Hash tables configured (established 8192 bind 8192) [ 0.080977] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.080992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.081052] NET: Registered protocol family 1 [ 0.081206] RPC: Registered named UNIX socket transport module. [ 0.081210] RPC: Registered udp transport module. [ 0.081213] RPC: Registered tcp transport module. [ 0.081216] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.081222] PCI: CLS 0 bytes, default 64 [ 0.081800] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.082422] Initialise system trusted keyrings [ 0.082482] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.084874] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.085108] NFS: Registering the id_resolver key type [ 0.085117] Key type id_resolver registered [ 0.085121] Key type id_legacy registered [ 0.085138] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.085683] Key type asymmetric registered [ 0.085688] Asymmetric key parser 'x509' registered [ 0.085708] bounce: pool size: 64 pages [ 0.085729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.085734] io scheduler noop registered [ 0.085737] io scheduler deadline registered [ 0.085817] io scheduler cfq registered (default) [ 0.085821] io scheduler mq-deadline registered [ 0.085825] io scheduler kyber registered [ 0.087218] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.097990] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.099159] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.116168] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117223] console [ttyS0] disabled [ 0.117242] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.051246] console [ttyS0] enabled [ 1.055036] SuperH (H)SCI(F) driver initialized [ 1.059918] msm_serial: driver initialized [ 1.064074] STMicroelectronics ASC driver initialized [ 1.071253] Failed to attached device 54200000.dc to IOMMU_mapping [ 1.085581] Failed to attached device 54240000.dc to IOMMU_mapping [ 1.100026] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.106501] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.113997] panel-simple panel: panel supply power not found, using dummy regulator [ 1.124437] brd: module loaded [ 1.129928] loop: module loaded [ 1.134016] as3722 4-0040: AS3722 with revision 0x1 found [ 1.143964] as3722-sd2: supplied by +5V_SYS [ 1.148367] as3722-sd3: supplied by +5V_SYS [ 1.152714] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.158872] as3722-sd4: supplied by +5V_SYS [ 1.163207] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.168929] as3722-sd5: supplied by +5V_SYS [ 1.174537] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.180248] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.186254] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.191856] as3722-ldo3: supplied by +3.3V_SYS [ 1.196308] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.203871] as3722-ldo4: supplied by +3.3V_SYS [ 1.208462] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.214467] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.219236] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.225913] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.231924] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.236695] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.243233] as3722-ldo9: supplied by +5V_SYS [ 1.247799] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.253996] as3722-ldo10: supplied by +5V_SYS [ 1.258499] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.264931] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.283539] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.289197] libphy: Fixed MDIO Bus: probed [ 1.293638] CAN device driver interface [ 1.297776] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.303888] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.309705] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.315633] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.322583] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.329463] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.336867] usbcore: registered new interface driver pegasus [ 1.342531] usbcore: registered new interface driver asix [ 1.347925] usbcore: registered new interface driver ax88179_178a [ 1.354021] usbcore: registered new interface driver cdc_ether [ 1.359851] usbcore: registered new interface driver smsc75xx [ 1.365603] usbcore: registered new interface driver smsc95xx [ 1.371342] usbcore: registered new interface driver net1080 [ 1.377002] usbcore: registered new interface driver cdc_subset [ 1.382921] usbcore: registered new interface driver zaurus [ 1.388497] usbcore: registered new interface driver cdc_ncm [ 1.394830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.401341] ehci-pci: EHCI PCI platform driver [ 1.405793] ehci-platform: EHCI generic platform driver [ 1.411074] ehci-orion: EHCI orion driver [ 1.415132] SPEAr-ehci: EHCI SPEAr driver [ 1.419177] ehci-st: EHCI STMicroelectronics driver [ 1.424093] ehci-exynos: EHCI EXYNOS driver [ 1.428320] ehci-atmel: EHCI Atmel driver [ 1.432369] tegra-ehci: Tegra EHCI driver [ 1.436429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.442602] ohci-pci: OHCI PCI platform driver [ 1.447045] ohci-platform: OHCI generic platform driver [ 1.452324] SPEAr-ohci: OHCI SPEAr driver [ 1.456369] ohci-st: OHCI STMicroelectronics driver [ 1.461279] ohci-atmel: OHCI Atmel driver [ 1.465540] usbcore: registered new interface driver usb-storage [ 1.472907] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.481572] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.488439] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.495383] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.502524] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.508875] i2c /dev entries driver [ 1.514768] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.526166] sdhci: Secure Digital Host Controller Interface driver [ 1.532350] sdhci: Copyright(c) Pierre Ossman [ 1.537275] Synopsys Designware Multimedia Card Interface Driver [ 1.543784] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.549711] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.562316] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.567187] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.586223] mmc0: Unknown controller version (3). You may experience problems. [ 1.593481] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.630211] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.638373] ledtrig-cpu: registered to indicate activity on CPUs [ 1.644495] usbcore: registered new interface driver usbhid [ 1.650052] usbhid: USB HID core driver [ 1.655342] NET: Registered protocol family 10 [ 1.660187] Segment Routing with IPv6 [ 1.663900] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.670016] NET: Registered protocol family 17 [ 1.674464] can: controller area network core (rev 20170425 abi 9) [ 1.680660] NET: Registered protocol family 29 [ 1.685104] can: raw protocol (rev 20170425) [ 1.689367] can: broadcast manager protocol (rev 20170425 t) [ 1.695026] can: netlink gateway (rev 20170425) max_hops=1 [ 1.700630] Key type dns_resolver registered [ 1.705109] ThumbEE CPU extension supported. [ 1.709378] Registering SWP/SWPB emulation handler [ 1.714482] Loading compiled-in X.509 certificates [ 1.725736] +3.3V_RUN: supplied by +3.3V_SYS [ 1.729779] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.740117] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.740646] +VDD_LED: supplied by +VDD_MUX [ 1.752544] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.758203] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.762928] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.767625] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.768549] mmc0: new high speed MMC card at address 0001 [ 1.773092] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.778420] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.783075] +5V_USB_HS: supplied by +5V_SYS [ 1.787294] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.791528] +5V_USB_SS: supplied by +5V_SYS [ 1.797460] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.807579] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0) [ 1.815290] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.819211] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.826257] +3.3V_LP0: supplied by +3.3V_SYS [ 1.831394] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.831596] elan_i2c 1-0015: failed to read report data: -121 [ 1.837552] +5V_HDMI_CON: supplied by +5V_SYS [ 1.847933] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.854737] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.869229] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.876045] panel-simple panel: panel supply power not found, using dummy regulator [ 1.885082] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.899011] mmc1: Unknown controller version (3). You may experience problems. [ 1.906289] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.912724] mmc1: Switching to 3.3V signalling voltage failed [ 1.942297] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.950473] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.955383] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.965608] mmc2: Unknown controller version (3). You may experience problems. [ 1.972296] elan_i2c 1-0015: invalid report id data (ff) [ 1.972982] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.014313] mmc1: new high speed SDIO card at address 0001 [ 2.020056] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.028009] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.034578] panel-simple panel: panel supply power not found, using dummy regulator [ 2.043080] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.050337] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.056906] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.057557] panel-simple panel: panel supply power not found, using dummy regulator [ 2.065973] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.077751] +1.05V_RUN: disabling [ 2.081319] +1.8V_RUN_CAM: disabling [ 2.085131] +3.3V_RUN_CAM: disabling [ 2.088918] +1.2V_RUN_CAM_FRONT: disabling [ 2.093275] +1.05V_RUN_CAM_REAR: disabling [ 2.097530] +2.8V_RUN_TOUCH: disabling [ 2.101435] +2.8V_RUN_CAM_AF: disabling [ 2.105511] +1.8V_RUN_VPP_FUSE: disabling [ 2.109680] +VDD_LED: disabling [ 2.112853] +5V_VDD_TS_SW: disabling [ 2.116429] +5V_USB_HS: disabling [ 2.119736] +5V_USB_SS: disabling [ 2.123080] +3.3V_PANEL: disabling [ 2.126482] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.131009] +5V_HDMI_CON: disabling [ 2.135592] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.144223] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.180952] EXT4-fs (mmcblk0p3): recovery complete [ 2.186454] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.194589] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.201184] devtmpfs: mounted [ 2.204861] Freeing unused kernel memory: 2048K [ 2.217664] mmc2: new high speed SDHC card at address 0007 [ 2.223481] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.236828] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.243008] GPT:3014591 != 15564799 [ 2.246486] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.253875] GPT:3014591 != 15564799 [ 2.257351] GPT: Use GNU Parted to correct GPT errors. [ 2.262504] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.271421] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.278023] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#