Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.095539943 -0800
+++ /tmp/foob	2018-01-29 21:53:25.095539943 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 01:31:28 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -65,9 +65,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000000b0fa46d, 1 data @ 000000003a14ee47)
+vdso: 2 pages (1 code @ 0000000055e65eee, 1 data @ 0000000042f9f0af)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -138,9 +138,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -174,7 +174,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-29 09:36:15 UTC (1517218575)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-30 05:44:45 UTC (1517291085)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.135540130 -0800
+++ /tmp/foob	2018-01-29 21:53:25.139540148 -0800
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.1 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8122880 (7bf200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bf200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 01:21:11 PST 2018
+Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -320,18 +320,18 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
-usb1_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+ mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
+[drm] No driver support for vblank timestamp query.
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
- mmcblk0: p1 p2 p3
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
@@ -353,7 +353,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-21 16:26:13 UTC (961604773)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-22 12:39:29 UTC (961677569)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -365,4 +365,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.749336] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.759211] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.167540279 -0800
+++ /tmp/foob	2018-01-29 21:53:25.171540297 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 6216672 (5edbe0 hex)
+Bytes transferred = 6219008 (5ee500 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5edbe0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ee500 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:20:19 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -288,10 +288,10 @@
 usbhid: USB HID core driver
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmc0: new high speed SDHC card at address aaaa
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
  mmcblk0: p1 p2 p3
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-21 16:23:32 UTC (961604612)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-22 12:36:55 UTC (961677415)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,4 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.361775] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.396495] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.191540391 -0800
+++ /tmp/foob	2018-01-29 21:53:25.195540410 -0800
@@ -35,20 +35,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.4 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8122880 (7bf200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.3 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bf200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 01:21:11 PST 2018
+Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -321,14 +321,14 @@
 +3.3V_RUN: supplied by +3.3V_SYS
 +USB0_VBUS_SW: supplied by +5V_SYS
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
 +5V_USB_HS: supplied by +5V_SYS
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmc0: new high speed MMC card at address 0001
 +3.3V_LP0: supplied by +3.3V_SYS
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 +5V_HDMI_CON: supplied by +5V_SYS
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 +5V_SATA: supplied by +5V_SYS
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +12V_SATA: supplied by +VDD_MUX
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
@@ -396,9 +396,9 @@
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
@@ -443,7 +443,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xaff7f2df, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf9a865c2, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -455,7 +455,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:13 UTC (946685053)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.203540447 -0800
+++ /tmp/foob	2018-01-29 21:53:25.207540465 -0800
@@ -35,7 +35,7 @@
 	 ##################################
 	 4 MiB/s
 done
-Bytes transferred = 6216672 (5edbe0 hex)
+Bytes transferred = 6219008 (5ee500 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5edbe0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ee500 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:20:19 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -388,8 +388,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xeea9b256, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x413f9378, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -455,8 +455,8 @@
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +USB0_VBUS_SW: disabling
-+1.8V_RUN_CAM: disabling
 cfg80211: failed to load regulatory.db
++1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.223540540 -0800
+++ /tmp/foob	2018-01-29 21:53:25.227540559 -0800
@@ -14,7 +14,7 @@
 Out:   serial
 Err:   serial
 Net:   No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Jetson TK1) # 
 Tegra124 (Jetson TK1) # pci enum
 Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.9 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6382744 (616498 hex)
+Bytes transferred = 6385112 (616dd8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x616498 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616dd8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:23:51 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:34:32 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -382,8 +382,8 @@
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
@@ -446,7 +446,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x76d43c68, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xb12e58a0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -458,12 +458,12 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:19 UTC (946685059)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:59 UTC (946684919)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
+cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.243540633 -0800
+++ /tmp/foob	2018-01-29 21:53:25.247540652 -0800
@@ -43,9 +43,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8122880 (7bf200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bf200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 01:21:11 PST 2018
+Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -308,9 +308,7 @@
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 usbcore: registered new interface driver usbhid
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbhid: USB HID core driver
 NET: Registered protocol family 10
 Segment Routing with IPv6
@@ -325,28 +323,30 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
+mmc0: new high speed MMC card at address 0001
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +5V_VDD_TS_SW: supplied by +5V_SYS
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
-mmc0: new high speed MMC card at address 0001
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +5V_USB_SS: supplied by +5V_SYS
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_PANEL: supplied by +3.3V_RUN
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +3.3V_LP0: supplied by +3.3V_SYS
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -365,8 +365,7 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
-mmc1: new high speed SDIO card at address 0001
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:07:11 UTC (946685231)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -384,6 +383,7 @@
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+mmc1: new high speed SDIO card at address 0001
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.263540727 -0800
+++ /tmp/foob	2018-01-29 21:53:25.267540746 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -30,7 +30,6 @@
 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
 Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'zImage.tegra_defconfig'.
@@ -42,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6216672 (5edbe0 hex)
+Bytes transferred = 6219008 (5ee500 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5edbe0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ee500 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -63,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:20:19 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -361,12 +360,12 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
+cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.295540876 -0800
+++ /tmp/foob	2018-01-29 21:53:25.299540895 -0800
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6382744 (616498 hex)
+Bytes transferred = 6385112 (616dd8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x616498 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616dd8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:23:51 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:34:32 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -368,13 +368,13 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:54 UTC (946684974)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +3.3V_AVDD_HDMI_AP_GATED: disabling
-cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
+cfg80211: failed to load regulatory.db
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
@@ -402,18 +402,18 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.917902] alloc_contig_range: [fbc79, fbc7a) PFNs busy
+root@(none):/# [    2.918399] alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.311540951 -0800
+++ /tmp/foob	2018-01-29 21:53:25.315540969 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801440 us
+Bootloader-Cpu Init at (time stamp): 1801296 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801414  us
-Bootloader (AosInit) time: 733455 us
-Bootloader Main Init time: 180131 us
-BlockDevMgrInit time: 157546 us
+Miscellaneous avp time: 1801270  us
+Bootloader (AosInit) time: 733429 us
+Bootloader Main Init time: 180213 us
+BlockDevMgrInit time: 157543 us
 PartMgrInit time: 8 us
 StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77130 us 
-Display init time: 574478 us
+Partition Table load: 77099 us 
+Display init time: 574423 us
 Kernel read time: 1567 msec
 Load Kernel Size:   20760576 Bytes
 Bl Kernel ReadSpeed: 13248000 Bytes/sec
-Pre-Kernel Jump time: 4385134 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9570101 us
+Pre-Kernel Jump time: 4385438 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9570419 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 01:31:28 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -142,7 +142,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000eda1e3f2, 1 data @ 000000007c4f56f1)
+vdso: 2 pages (1 code @ 00000000e6f90302, 1 data @ 000000004216b5d4)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -221,9 +221,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -260,13 +260,13 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 NET: Registered protocol family 17
 9pnet: Installing 9P2000 support
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-Key type dns_resolver registered
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-registered taskstats version 1
+Key type dns_resolver registered
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+registered taskstats version 1
 Loading compiled-in X.509 certificates
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.343541100 -0800
+++ /tmp/foob	2018-01-29 21:53:25.347541119 -0800
@@ -1,40 +1,20 @@
 
 
-FAILED: Linux Boot Test 1
+Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 70.16 sec
-	Percent passed so far: 0.0
+	Execution Time 56.82 sec
+	Percent passed so far: 50.0
 	
 
 
-FAILED: Linux Boot Test 2
+Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 190.24 sec
-	Test TIMEOUT reached. Test did not report results in 120 secs
-	Percent passed so far: 0.0
+	Execution Time 56.17 sec
+	Percent passed so far: 100.0
 	
 
-
-FAILED: Linux Boot Test 3
-	Test Owner(s): N/A
-	Execution Time 190.23 sec
-	Test TIMEOUT reached. Test did not report results in 120 secs
-	Percent passed so far: 0.0
-	
-
-Final Score: 0.0
-
-Sanity Failed! 
-

-Ubuntu 16.04 LTS tegra-ubuntu ttyS0
-
-tegra-ubuntu login: ubuntu (automatic login)
-

-Last login: Mon Aug 22 15:50:25 UTC 2016 on ttyS0
-Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.9.61-tegra-g5ca3746 aarch64)
-
- * Documentation:  https://help.ubuntu.com/
-ubuntu@tegra-ubuntu:~$ [0004.174] I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
+Final Score: 100.0
+I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
 I> rst_source : 0x0
 I> rst_level : 0x0
 I> Boot-device: eMMC
@@ -52,7 +32,7 @@
 I> Version of mb1 bct binary 12
 W> MB1 BCT does not have controller prod config data
 I> Bootrom patch version : 31 (correctly patched)
-I> ATE fuse revision : 0xa0
+I> ATE fuse revision : 0x30880
 I> chip revision : A02P
 I> disabled_core_mask: 0xffffff0c
 I> Enabled Cores: 0xf3
@@ -117,8 +97,8 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc07e0fc5c
-I> Updated LSR_DVCOMP_PARAMS: 0xc0821045c
+I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0801005c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -289,7 +269,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 28325116 bytes
+I> Total write size is 28333308 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -319,7 +299,7 @@
 I> Total write size is 20848 bytes
 I> Write successful.
 I> Writing kernel partition
-I> Total write size is 6735872 bytes
+I> Total write size is 6733824 bytes
 I> Write successful.
 I> Writing kernel-dtb partition
 I> Total write size is 248128 bytes
@@ -512,7 +492,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -539,26 +519,26 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
-I> Move ramdisk (len: 6265190) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9966
+I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0321217203439
+I> add_serialno: Serial Num = 0320817139469
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203439 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:8e:5e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:8e:5f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:8e:60
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -593,13 +573,7 @@
 Model: NVIDIA P2771-0000-500
 DRAM:  7.8 GiB
 MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2 [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -778,7 +752,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -805,26 +779,26 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265190) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9966
+I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0321217203439
+I> add_serialno: Serial Num = 0320817139469
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203439 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:8e:5e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:8e:5f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:8e:60
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -873,17 +847,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-432 bytes read in 66 ms (5.9 KiB/s)
+431 bytes read in 74 ms (4.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265190 bytes read in 206 ms (29 MiB/s)
+6264556 bytes read in 202 ms (29.6 MiB/s)
 Retrieving file: /boot/Image
 17394176 bytes read in 463 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot,nolock,nfsvers=2 rootwait
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 61 ms (376 KiB/s)
+23528 bytes read in 57 ms (402.3 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -910,9 +884,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -1005,9 +979,9 @@
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 mmc2: new high speed MMC card at address 0001
-max77686-rtc max77620-rtc: setting system clock to 2016-08-22 15:54:09 UTC (1471881249)
+max77686-rtc max77620-rtc: setting system clock to 2016-12-10 05:46:52 UTC (1481348812)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address ba:87:cb:79:8e:be
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 6e:e4:cb:39:0d:46
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
@@ -1016,35 +990,35 @@
 dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
 dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
-WARNING: CPU: 0 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 0 PID: 5 Comm: kworker/u12:0 Tainted: G S               4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
-IP-Config: Complete:
+CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S               4.15.0-next-20180130-348510-gadbc9f27e641 #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
-     device=eth0, hwaddr=ba:87:cb:79:8e:be, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+IP-Config: Complete:
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009da3ab0
-     host=192.168.99.2, domain=, nis-domain=(none)
-x29: ffff000009da3ab0 x28: ffff8001f7808070 
+sp : ffff000009fa3ab0
+     device=eth0, hwaddr=6e:e4:cb:39:0d:46, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+x29: ffff000009fa3ab0 x28: ffff8001f7808070 
 x27: ffff8001f7808020 x26: ffff000008fffda8 
-     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+     host=192.168.99.2, domain=, nis-domain=(none)
 x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4e40878 
+x23: ffff8001f4de4878 
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 x22: 0000000000000080 
-x21: ffff000009da3b58 x20: ffff000008fe9000 
-x19: ffff000009da3bd8 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
+x21: ffff000009fa3b58 x20: ffff000008fe9000 
+x19: ffff000009fa3bd8 x18: 0000000000000000 
+x17: 000000005133532a x16: 000000009134f0e0 
+x15: 0000000075a6474d x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000004 
-x9 : 00000000ffffffff x8 : ffff8001fffaf6e0 
-x7 : ffff00000ca30000 x6 : ffff000009da3b68 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000c820000 x6 : ffff000009fa3b68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009da3bc0 x2 : 0000000000000080 
-x1 : ffff000009da3b68 x0 : ffff8001f65a5a18 
+x3 : ffff000009fa3bc0 x2 : 0000000000000080 
+x1 : ffff000009fa3b68 x0 : ffff8001f65abc18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1061,31 +1035,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 5cbfe46a6804aac0 ]---
-WARNING: CPU: 0 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace c933c4e5b4aba23b ]---
+WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 0 PID: 5 Comm: kworker/u12:0 Tainted: G S      W        4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
+CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S      W        4.15.0-next-20180130-348510-gadbc9f27e641 #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009da3a40
-x29: ffff000009da3a40 x28: ffff8001f7808070 
+sp : ffff000009fa3a40
+x29: ffff000009fa3a40 x28: ffff8001f7808070 
 x27: ffff8001f7808020 x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009da3ae8 x20: ffff000008fe9000 
-x19: ffff000009da3b68 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
+x21: ffff000009fa3ae8 x20: ffff000008fe9000 
+x19: ffff000009fa3b68 x18: 0000000000000000 
+x17: 000000005133532a x16: 000000009134f0e0 
+x15: 0000000075a6474d x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000004 
-x9 : 00000000ffffffff x8 : ffff8001fffaf6e0 
-x7 : ffff00000ca30000 x6 : ffff000009da3af8 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000c820000 x6 : ffff000009fa3af8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009da3b50 x2 : 0000000000000080 
-x1 : ffff000009da3af8 x0 : ffff8001f65a5a18 
+x3 : ffff000009fa3b50 x2 : 0000000000000080 
+x1 : ffff000009fa3af8 x0 : ffff8001f65abc18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1102,7 +1076,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 5cbfe46a6804aac1 ]---
+---[ end trace c933c4e5b4aba23c ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1113,13 +1087,126 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Mon Aug 22 15:54:14 UTC 2016
+L4T-INITRD Build DATE: Sat Dec 10 05:46:57 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
-ERROR: dhclient fail...
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-bash-4.3# [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+IP Address: 192.168.99.2
+Rootfs mounted over nfs
+Switching from initrd to actual rootfs
+systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
+systemd[1]: Detected architecture arm64.
+
+Welcome to [1mUbuntu 16.04 LTS[0m!
+
+systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Reached target Swap.
+Reached target Swap.
+systemd[1]: Listening on udev Control Socket.
+Listening on udev Control Socket.
+systemd[1]: Created slice System Slice.
+Created slice System Slice.
+systemd[1]: Created slice system-getty.slice.
+Created slice system-getty.slice.
+systemd[1]: Listening on Journal Socket.
+Listening on Journal Socket.
+systemd[1]: Mounting RPC Pipe File System...
+         Mounting RPC Pipe File System...
+systemd[1]: Mounting POSIX Message Queue File System...
+         Mounting POSIX Message Queue File System...
+         Starting Create Static Device Nodes in /dev...
+         Mounting Huge Pages File System...
+Listening on Journal Audit Socket.
+Created slice User and Session Slice.
+Reached target Slices.
+Created slice system-serial\x2dgetty.slice.
+         Starting Load Kernel Modules...
+Listening on Journal Socket (/dev/log).
+         Mounting Debug File System...
+Listening on Syslog Socket.
+Started Forward Password Requests to Wall Directory Watch.
+Listening on /dev/initctl Compatibility Named Pipe.
+Listening on udev Kernel Socket.
+Reached target Encrypted Volumes.
+         Starting Remount Root and Kernel File Systems...
+         Starting Journal Service...
+Started Dispatch Password Requests to Console Directory Watch.
+Reached target Paths.
+Mounted Debug File System.
+Mounted POSIX Message Queue File System.
+Mounted Huge Pages File System.
+Mounted RPC Pipe File System.
+Started Create Static Device Nodes in /dev.
+Started Load Kernel Modules.
+Started Remount Root and Kernel File Systems.
+         Starting Load/Save Random Seed...
+         Starting udev Coldplug all Devices...
+         Starting Apply Kernel Variables...
+         Mounting Configuration File System...
+         Starting udev Kernel Device Manager...
+Reached target Local File Systems (Pre).
+Reached target Local File Systems.
+         Starting Preprocess NFS configuration...
+         Starting Set console keymap...
+Mounted Configuration File System.
+Started Journal Service.
+Failed to start Set console keymap.
+See 'systemctl status console-setup.service' for details.
+         Starting Flush Journal to Persistent Storage...
+Started Load/Save Random Seed.
+systemd-journald[1512]: Received request to flush runtime journal from PID 1
+Started Flush Journal to Persistent Storage.
+Started udev Coldplug all Devices.
+         Starting Create Volatile Files and Directories...
+Started Apply Kernel Variables.
+Started Preprocess NFS configuration.
+Reached target NFS client services.
+Reached target Remote File Systems (Pre).
+Reached target Remote File Systems.
+         Starting Raise network interfaces...
+Started udev Kernel Device Manager.
+Found device /dev/ttyS0.
+Started Create Volatile Files and Directories.
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
+Reached target System Time Synchronized.
+         Starting Update UTMP about System Boot/Shutdown...
+Started Update UTMP about System Boot/Shutdown.
+Reached target System Initialization.
+Listening on RPCbind Server Activation Socket.
+Listening on D-Bus System Message Bus Socket.
+Reached target Sockets.
+Reached target Basic System.
+         Starting Permit User Sessions...
+         Starting System Logging Service...
+         Starting OpenBSD Secure Shell server...
+         Starting /etc/rc.local Compatibility...
+Started Regular background program processing daemon.
+Started Daily Cleanup of Temporary Directories.
+Started Daily apt activities.
+Reached target Timers.
+         Starting LSB: Start NTP daemon...
+         Starting Login Service...
+Started D-Bus System Message Bus.
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started System Logging Service.
+Started Permit User Sessions.
+Started /etc/rc.local Compatibility.
+Started Serial Getty on ttyS0.
+Started Getty on tty1.
+Reached target Login Prompts.
+Started OpenBSD Secure Shell server.
+Started Login Service.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started LSB: Start NTP daemon.
+Reached target Multi-User System.
+Reached target Graphical Interface.
+         Starting Update UTMP about System Runlevel Changes...
+Started Update UTMP about System Runlevel Changes.
+

+Ubuntu 16.04 LTS tegra-ubuntu ttyS0
+
+tegra-ubuntu login: [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -1298,7 +1385,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -1325,26 +1412,26 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265190) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6264556) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9966
+I> Ramdisk: Base: 0x98000000; Size: 0x5f96ec
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0321217203439
+I> add_serialno: Serial Num = 0320817139469
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203439 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139469 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:8e:5e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:8e:5f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:8e:60
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:63:1e
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:63:1f
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:63:20
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -1393,17 +1480,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-432 bytes read in 65 ms (5.9 KiB/s)
+431 bytes read in 74 ms (4.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265190 bytes read in 205 ms (29.1 MiB/s)
+6264556 bytes read in 201 ms (29.7 MiB/s)
 Retrieving file: /boot/Image
 17394176 bytes read in 462 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot,nolock,nfsvers=2 rootwait
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2633/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 61 ms (376 KiB/s)
+23528 bytes read in 56 ms (410.2 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -1430,9 +1517,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -1524,46 +1611,48 @@
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-08-22 15:55:23 UTC (1471881323)
 mmc2: new high speed MMC card at address 0001
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address b6:2c:a3:28:8f:d8
+max77686-rtc max77620-rtc: setting system clock to 2016-12-10 05:47:54 UTC (1481348874)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address ca:c0:be:a6:28:3e
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
-dwmac4: Master AXI performs any burst length
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwmac4: Master AXI performs any burst length
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-WARNING: CPU: 1 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+WARNING: CPU: 4 PID: 86 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 1 PID: 5 Comm: kworker/u12:0 Tainted: G S               4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
+CPU: 4 PID: 86 Comm: kworker/u12:4 Tainted: G S               4.15.0-next-20180130-348510-gadbc9f27e641 #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-IP-Config: Complete:
 Workqueue: events_power_efficient phy_state_machine
-     device=eth0, hwaddr=b6:2c:a3:28:8f:d8, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-     host=192.168.99.2, domain=, nis-domain=(none)
+IP-Config: Complete:
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
-     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009da3ab0
-x29: ffff000009da3ab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fffda8 
+     device=eth0, hwaddr=ca:c0:be:a6:28:3e, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+sp : ffff00000a05bab0
+x29: ffff00000a05bab0 x28: 0000000000000000 
+x27: ffff000009fa3ce8 
+     host=192.168.99.2, domain=, nis-domain=(none)
+x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4f68878 x22: 0000000000000080 
-x21: ffff000009da3b58 x20: ffff000008fe9000 
-x19: ffff000009da3bd8 x18: 0000000000000007 
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+x23: ffff8001f5dac878 
+x22: 0000000000000080 
+x21: ffff00000a05bb58 x20: ffff000008fe9000 
+x19: ffff00000a05bbd8 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000ce63d88 x10: 0000000000000a00 
-x9 : ffff000009da3b40 x8 : ffff8001f689c260 
-x7 : ffff00000bf50000 x6 : ffff000009da3b68 
+x15: 00000000ffffff80 x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000ca30000 x6 : ffff00000a05bb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009da3bc0 x2 : 0000000000000080 
-x1 : ffff000009da3b68 x0 : ffff8001f65a3a18 
+x3 : ffff00000a05bbc0 x2 : 0000000000000080 
+x1 : ffff00000a05bb68 x0 : ffff8001f656fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1580,31 +1669,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace a506f08e12ea071d ]---
-WARNING: CPU: 1 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace 88ef5e97ef1e3128 ]---
+WARNING: CPU: 4 PID: 86 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 1 PID: 5 Comm: kworker/u12:0 Tainted: G S      W        4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
+CPU: 4 PID: 86 Comm: kworker/u12:4 Tainted: G S      W        4.15.0-next-20180130-348510-gadbc9f27e641 #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009da3a40
-x29: ffff000009da3a40 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fffda8 
+sp : ffff00000a05ba40
+x29: ffff00000a05ba40 x28: 0000000000000000 
+x27: ffff000009fa3ce8 x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009da3ae8 x20: ffff000008fe9000 
-x19: ffff000009da3b68 x18: 0000000000000007 
+x21: ffff00000a05bae8 x20: ffff000008fe9000 
+x19: ffff00000a05bb68 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000ce63d88 x10: 0000000000000a00 
-x9 : ffff000009da3b40 x8 : ffff8001f689c260 
-x7 : ffff00000bf50000 x6 : ffff000009da3af8 
+x15: 00000000ffffff80 x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000ca30000 x6 : ffff00000a05baf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009da3b50 x2 : 0000000000000080 
-x1 : ffff000009da3af8 x0 : ffff8001f65a3a18 
+x3 : ffff00000a05bb50 x2 : 0000000000000080 
+x1 : ffff00000a05baf8 x0 : ffff8001f656fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1621,7 +1710,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace a506f08e12ea071e ]---
+---[ end trace 88ef5e97ef1e3129 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1632,763 +1721,123 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Mon Aug 22 15:55:28 UTC 2016
+L4T-INITRD Build DATE: Sat Dec 10 05:47:59 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
-ERROR: dhclient fail...
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-bash-4.3# [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
-I> Default Heap @ [0xd486400 - 0xd488400]
-I> DMA Heap @ [0x84900000 - 0x85300000]
-I> bit @ 0xd480000
-I> BR-BCT relocated to 0xf7f20000
-I> Boot-device: eMMC
-I> pmic: reset reason (nverc)	: 0x10
-I> Reading GPT from 512 for device 00000003
-I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
-I> Reading GPT from 512 for device 00010003
-I> Found 17 partitions in 00010003 device
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (16) slot 0
-I> Select partition: bpmp-fw
-I> Loading partition bpmp-fw at 0xf7600000
-I> Reading two headers - addr:0xf7600000 blocks:1
-I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
-I> Binary(16) of size 524480 is loaded @ 0xf7600000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (17) slot 0
-I> Select partition: bpmp-fw-dtb
-I> Loading partition bpmp-fw-dtb at 0xf77f0000
-I> Reading two headers - addr:0xf77f0000 blocks:1
-I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
-I> Binary(17) of size 326672 is loaded @ 0xf77b0200
-I> BPMP-FW load address = 0xf7600000
-I> BPMP-FW DTB load address = 0x501b0200
-I> Loading SCE-FW ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (12) slot 0
-I> Select partition: sce-fw
-I> Loading partition sce-fw at 0xf7800000
-I> Reading two headers - addr:0xf7800000 blocks:1
-I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
-I> Binary(12) of size 65088 is loaded @ 0xf7800000
-I> Init SCE
-I> Copy BTCM section
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (13) slot 0
-I> Select partition: cpu-bootloader
-I> Loading partition cpu-bootloader at 0x96000000
-I> Reading two headers - addr:0x96000000 blocks:1
-I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
-I> Binary(13) of size 195776 is loaded @ 0x96000000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (20) slot 0
-I> Select partition: bootloader-dtb
-I> Loading partition bootloader-dtb at 0x85300000
-I> Reading two headers - addr:0x85300000 blocks:1
-I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
-I> Binary(20) of size 248128 is loaded @ 0x85300000
-I> MB2-params @ 0xf7f00000
-I> CPUBL-params @ 0xf7f00000
-I> CPU-BL loaded at : 0x96000000
-I> Loading TOS ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (14) slot 0
-I> Select partition: secure-os
-I> Loading partition secure-os at 0x8490f400
-I> Reading two headers - addr:0x8490f400 blocks:1
-I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
-I> Binary(14) of size 54384 is loaded @ 0x8490f400
-I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
-I> Erasing Monitor @ 0x8490f600
-I> Unhalting SCE
-I> Waypoint2-ACK: 0x5200b8d0
-I> MB2(TBoot-BPMP) done
+IP Address: 192.168.99.2
+Rootfs mounted over nfs
+Switching from initrd to actual rootfs
+systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
+systemd[1]: Detected architecture arm64.
+
+Welcome to [1mUbuntu 16.04 LTS[0m!
+
+systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Reached target Encrypted Volumes.
+Reached target Encrypted Volumes.
+systemd[1]: Listening on udev Kernel Socket.
+Listening on udev Kernel Socket.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Reached target Swap.
+Reached target Swap.
+systemd[1]: Created slice User and Session Slice.
+Created slice User and Session Slice.
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Dispatch Password Requests to Console Directory Watch.
+Reached target Paths.
+Listening on /dev/initctl Compatibility Named Pipe.
+Created slice System Slice.
+Created slice system-serial\x2dgetty.slice.
+Created slice system-getty.slice.
+Reached target Slices.
+Listening on Syslog Socket.
+Listening on Journal Socket.
+         Mounting RPC Pipe File System...
+         Mounting POSIX Message Queue File System...
+         Starting Load Kernel Modules...
+         Starting Remount Root and Kernel File Systems...
+         Mounting Debug File System...
+         Mounting Huge Pages File System...
+         Starting Create Static Device Nodes in /dev...
+Listening on Journal Socket (/dev/log).
+         Starting Journal Service...
+Listening on udev Control Socket.
+Mounted Debug File System.
+Mounted POSIX Message Queue File System.
+Mounted Huge Pages File System.
+Mounted RPC Pipe File System.
+Started Load Kernel Modules.
+Started Remount Root and Kernel File Systems.
+Started Create Static Device Nodes in /dev.
+Started Journal Service.
+         Starting udev Kernel Device Manager...
+         Starting udev Coldplug all Devices...
+Reached target Local File Systems (Pre).
+Reached target Local File Systems.
+         Starting Preprocess NFS configuration...
+         Starting Set console keymap...
+         Starting Flush Journal to Persistent Storage...
+         Starting Load/Save Random Seed...
+         Mounting Configuration File System...
+         Starting Apply Kernel Variables...
+Mounted Configuration File System.
+Started Preprocess NFS configuration.
+Failed to start Set console keymap.
+See 'systemctl status console-setup.service' for details.
+Started Load/Save Random Seed.
+Started Apply Kernel Variables.
+Started udev Kernel Device Manager.
+systemd-journald[1516]: Received request to flush runtime journal from PID 1
+Started Flush Journal to Persistent Storage.
+         Starting Create Volatile Files and Directories...
+         Starting Raise network interfaces...
+Reached target NFS client services.
+Reached target Remote File Systems (Pre).
+Reached target Remote File Systems.
+Started udev Coldplug all Devices.
+Found device /dev/ttyS0.
+Started Create Volatile Files and Directories.
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
+         Starting Update UTMP about System Boot/Shutdown...
+Reached target System Time Synchronized.
+Started Update UTMP about System Boot/Shutdown.
+Reached target System Initialization.
+Started Daily Cleanup of Temporary Directories.
+Started Daily apt activities.
+Reached target Timers.
+Listening on RPCbind Server Activation Socket.
+Listening on D-Bus System Message Bus Socket.
+Reached target Sockets.
+Reached target Basic System.
+         Starting Permit User Sessions...
+         Starting LSB: Start NTP daemon...
+Started Regular background program processing daemon.
+         Starting System Logging Service...
+         Starting OpenBSD Secure Shell server...
+         Starting /etc/rc.local Compatibility...
+Started D-Bus System Message Bus.
+         Starting Login Service...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started System Logging Service.
+Started Permit User Sessions.
+Started /etc/rc.local Compatibility.
+Started Getty on tty1.
+Started Serial Getty on ttyS0.
+Reached target Login Prompts.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Login Service.
+Started OpenBSD Secure Shell server.
+Started LSB: Start NTP daemon.
+Reached target Multi-User System.
+Reached target Graphical Interface.
+         Starting Update UTMP about System Runlevel Changes...
+Started Update UTMP about System Runlevel Changes.
+

+Ubuntu 16.04 LTS tegra-ubuntu ttyS0
 
-NOTICE:  BL31: v1.2(release):ff7a644
-NOTICE:  BL31: Built : 21:06:35, Mar  1 2017
-NOTICE:  Trusty image missing.
-ERROR:   Error initializing runtime service trusty_fast
-I> Welcome to Cboot
-I> Cboot Version: 00.00.2014.50-t186-fabbc56c
-I> CPU-BL Params @ 0xf7f00000
-I>  0) Base:0x00000000 Size:0x00000000
-I>  1) Base:0xf7e00000 Size:0x00100000
-I>  2) Base:0xf7d00000 Size:0x00100000
-I>  3) Base:0xf7c00000 Size:0x00100000
-I>  4) Base:0xf7b00000 Size:0x00100000
-I>  5) Base:0xf7a00000 Size:0x00100000
-I>  6) Base:0xf7600000 Size:0x00200000
-I>  7) Base:0xf7000000 Size:0x00400000
-I>  8) Base:0xf7900000 Size:0x00100000
-I>  9) Base:0xf7800000 Size:0x00100000
-I> 10) Base:0xf6800000 Size:0x00800000
-I> 11) Base:0x30000000 Size:0x00040000
-I> 12) Base:0xf7500000 Size:0x00100000
-I> 13) Base:0x30040000 Size:0x00001000
-I> 14) Base:0x30048000 Size:0x00001000
-I> 15) Base:0x30049000 Size:0x00001000
-I> 16) Base:0x3004a000 Size:0x00001000
-I> 17) Base:0x3004b000 Size:0x00001000
-I> 18) Base:0x3004c000 Size:0x00001000
-I> 19) Base:0x3004d000 Size:0x00001000
-I> 20) Base:0x3004e000 Size:0x00001000
-I> 21) Base:0x3004f000 Size:0x00001000
-I> 22) Base:0x00000000 Size:0x00000000
-I> 23) Base:0xf7ff0000 Size:0x00010000
-I> 24) Base:0x00000000 Size:0x00000000
-I> 25) Base:0x00000000 Size:0x00000000
-I> 26) Base:0x00000000 Size:0x00000000
-I> 27) Base:0x00000000 Size:0x00000000
-I> 28) Base:0x84400000 Size:0x00400000
-I> 29) Base:0x30000000 Size:0x00010000
-I> 30) Base:0xf8000000 Size:0x08000000
-I> 31) Base:0x00000000 Size:0x00000000
-I> 32) Base:0xf6000000 Size:0x00600000
-I> 33) Base:0x80000000 Size:0x76000000
-I> 34) Base:0x100000000 Size:0x180000000
-I> 35) Base:0x00000000 Size:0x00000000
-I> 36) Base:0x00000000 Size:0x00000000
-I> 37) Base:0xf7fc0000 Size:0x00020000
-I> 38) Base:0x84000000 Size:0x00400000
-I> 39) Base:0x96000000 Size:0x02000000
-I> 40) Base:0x84800000 Size:0x00b00000
-I> 41) Base:0xf7f00000 Size:0x00080000
-I> 42) Base:0x00000000 Size:0x00000000
-I> 43) Base:0x00000000 Size:0x00000000
-platform_init_interrupts-121, 1*

-Interrupts Init done

-calling constructors

-initializing heap
-initializing threads

-initializing timers

-creating bootstrap completion thread

-top of bootstrap2()

-CPU: ARM Cortex A57

-CPU: MIDR: 0x411FD073, MPIDR: 0x80000100

-initializing platform

-I> Boot-device: eMMC
-I> odm data is 1090000
-I> Reading GPT from 512 for device 00000003
-I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
-I> Reading GPT from 512 for device 00010003
-I> Found 17 partitions in 00010003 device
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (1) slot 0
-I> Select partition: kernel-dtb
-I> Loading partition kernel-dtb at 0x92000000
-I> Kernel_dtb @0x92000000
-I> Bl_dtb @0x85300000
-I> gpio framework initialized
-I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
-I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
-I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
-I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
-I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
-I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
-E> tegrabl_blob_init: BMP partition does not have valid Blob
-E> tegrabl_load_bmp_blob: BMP blob initialization failed
-W> Loading bmp blob to memory failed
-I> Find /i2c@c250000's alias i2c7
-I> Reading eeprom i2c=7 address=0x50
-I> Device at /i2c@c250000:0x50
-I> Reading eeprom i2c=7 address=0x57
-I> Device at /i2c@c250000:0x57
-I> Find /i2c@c240000's alias i2c1
-I> Reading eeprom i2c=1 address=0x51
-I> Eeprom read failed 0x1a800027
-I> Find /i2c@3160000's alias i2c0
-I> Reading eeprom i2c=0 address=0x50
-I> Eeprom read failed 0x1a800027
-I> Find /i2c@3180000's alias i2c2
-I> Reading eeprom i2c=2 address=0x54
-I> Enabling gpio chip_id = 2, gpio pin = 9
-I> Disabling gpio chip_id = 2, gpio pin = 9
-I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-initializing target

-calling apps_init()

-starting app android_boot_app

-I> Gpio keyboard init success
-I> Kernel type = Normal
-I> Loading kernel/boot.img ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (0) slot 0
-I> Select partition: kernel
-I> Loading partition kernel at 0xa8000000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (1) slot 0
-I> Select partition: kernel-dtb
-I> Loading partition kernel-dtb at 0x92000000
-I> Kernel DTB @ 0x92000000
-I> Verified boot state = Orange
-E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
-I> Valid boot.img @ 0xa8000000
-I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265190) from 0xa8072800 to 0x98000000
-I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9966
-I> Updated initrd info to DTB
-I> disabled_core_mask: 0xffffff0c
-I> Kernel type = Normal
-I> add_serialno: Serial Num = 0321217203439
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203439 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
-I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:8e:5e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:8e:5f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:8e:60
-E> "ids" doesn't exist, creating 
-E> "connection" doesn't exist, creating 
-E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
-E> "i2c@c250000" doesn't exist, creating 
-E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
-E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
-E> "i2c@3180000" doesn't exist, creating 
-E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-E
-I> Adding plugin-manager/configs/3310-mem-type 00
-I> Adding plugin-manager/configs/3310-power-config 00
-I> Adding plugin-manager/configs/3310-misc-config 00
-I> Adding plugin-manager/configs/3310-modem-config 00
-I> Adding plugin-manager/configs/3310-touch-config 00
-I> Adding plugin-manager/configs/3310-display-config 00
-E> "chip-id" doesn't exist, creating 
-I> Adding plugin-manager/chip-id/A02P
-I> Updated memory info to DTB
-E> "reset" doesn't exist, creating 
-E> "pmc-reset-reason" doesn't exist, creating 
-E> "pmic-reset-reason" doesn't exist, creating 
-I> disabled_core_mask: 0xffffff0c
-I> tegrabl_load_kernel_and_dtb: Done
-
-
-U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:46:37 -0700)
-
-TEGRA186
-Model: NVIDIA P2771-0000-500
-DRAM:  7.8 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2  1  0 
-MMC: no card present
-mmc_init: -123, time 1
-switch to partitions #0, OK
-mmc0(part 0) is current device
-Scanning mmc 0:1...
-Found /boot/extlinux/extlinux.conf
-Retrieving file: /boot/extlinux/extlinux.conf
-432 bytes read in 65 ms (5.9 KiB/s)
-p2771-0000 NFS boot options
-1:	primary kernel
-Enter choice: 1:	primary kernel
-Retrieving file: /boot/initrd
-6265190 bytes read in 206 ms (29 MiB/s)
-Retrieving file: /boot/Image
-17394176 bytes read in 463 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot,nolock,nfsvers=2 rootwait
-Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 61 ms (376 KiB/s)
-## Flattened Device Tree blob at 82000000
-   Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 0000000082000000, end 0000000082008be7
-
-Starting kernel ...
-
-console [ttyS0] enabled
-console [ttyS0] enabled
-bootconsole [uart0] disabled
-bootconsole [uart0] disabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
-arm-smmu 12000000.iommu: probing hardware configuration...
-arm-smmu 12000000.iommu: SMMUv2 with:
-arm-smmu 12000000.iommu: 	stage 1 translation
-arm-smmu 12000000.iommu: 	stage 2 translation
-arm-smmu 12000000.iommu: 	nested translation
-arm-smmu 12000000.iommu: 	stream matching with 128 register groups
-arm-smmu 12000000.iommu: 	64 context banks (0 stage-2 only)
-arm-smmu 12000000.iommu: 	Supported page sizes: 0x61311000
-arm-smmu 12000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
-arm-smmu 12000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
-cacheinfo: Unable to detect cache hierarchy for CPU 0
-loop: module loaded
-libphy: Fixed MDIO Bus: probed
-tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
-e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
-e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
-igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
-sky2: driver version 1.30
-dwc-eth-dwmac 2490000.ethernet: Cannot get CSR clock
-dwc-eth-dwmac 2490000.ethernet: no reset control found
-stmmac - user ID: 0x10, Synopsys ID: 0x41
-dwc-eth-dwmac 2490000.ethernet: DMA HW capability register supported
-dwc-eth-dwmac 2490000.ethernet: RX Checksum Offload Engine supported
-dwc-eth-dwmac 2490000.ethernet: TX Checksum insertion supported
-dwc-eth-dwmac 2490000.ethernet: Wake-Up On Lan supported
-dwc-eth-dwmac 2490000.ethernet: TSO supported
-dwc-eth-dwmac 2490000.ethernet: TSO feature enabled
-dwc-eth-dwmac 2490000.ethernet: Enable RX Mitigation via HW Watchdog Timer
-libphy: stmmac: probed
-VFIO - User Level meta-driver version: 0.3
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-ehci-platform: EHCI generic platform driver
-ehci-orion: EHCI orion driver
-ehci-exynos: EHCI EXYNOS driver
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ohci-pci: OHCI PCI platform driver
-ohci-platform: OHCI generic platform driver
-ohci-exynos: OHCI EXYNOS driver
-usbcore: registered new interface driver usb-storage
-i2c /dev entries driver
-max77620 0-003c: PMIC Version OTP:0x45 and ES:0x8
-max77620-sd0: supplied by regulator-dummy
-VDD_DDR_1V1_PMIC: Bringing 1125000uV into 1100000-1100000uV
-max77620-sd1: supplied by regulator-dummy
-max77620-sd2: supplied by regulator-dummy
-max77620-sd3: supplied by regulator-dummy
-max77620-ldo0: supplied by regulator-dummy
-max77620-ldo1: supplied by regulator-dummy
-max77620-ldo2: supplied by regulator-dummy
-max77620-ldo3: supplied by regulator-dummy
-max77620-ldo4: supplied by regulator-dummy
-VDD_RTC: Bringing 800000uV into 1000000-1000000uV
-max77620-ldo5: supplied by regulator-dummy
-VDDIO_SDMMC3_AP: Bringing 1800000uV into 2800000-2800000uV
-max77620-ldo6: supplied by regulator-dummy
-max77620-ldo7: supplied by regulator-dummy
-VDD_HDMI_1V05: Bringing 1000000uV into 1050000-1050000uV
-max77620-ldo8: supplied by regulator-dummy
-VDD_PEX_1V05: Bringing 1000000uV into 1050000-1050000uV
-max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-Synopsys Designware Multimedia Card Interface Driver
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 3400000.sdhci: Got CD GPIO
-sdhci-tegra 3400000.sdhci: Got WP GPIO
-mmc0: Unknown controller version (4). You may experience problems.
-mmc0: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA
-ledtrig-cpu: registered to indicate activity on CPUs
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-NET: Registered protocol family 17
-9pnet: Installing 9P2000 support
-Key type dns_resolver registered
-registered taskstats version 1
-Loading compiled-in X.509 certificates
-VDD_1V8_AP: supplied by VDD_1V8
-SD_CARD_SW_PWR: supplied by VDD_3V3_SYS
-pca953x 1-0074: 1-0074 supply vcc not found, using dummy regulator
-pca953x 1-0077: 1-0077 supply vcc not found, using dummy regulator
-tegra-pcie 10003000.pcie: 4x1, 1x1 configuration
-tegra-pcie 10003000.pcie: probing port 0, using 4 lanes
-tegra-pcie 10003000.pcie: Slot present pin change, signature: 00000018
-tegra-pcie 10003000.pcie: link 0 down, retrying
-tegra-pcie 10003000.pcie: link 0 down, retrying
-tegra-pcie 10003000.pcie: link 0 down, retrying
-tegra-pcie 10003000.pcie: link 0 down, ignoring
-tegra-pcie 10003000.pcie: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
-pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff]
-pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref]
-pci_bus 0000:00: root bus resource [bus 00-ff]
-sdhci-tegra 3400000.sdhci: Got CD GPIO
-sdhci-tegra 3400000.sdhci: Got WP GPIO
-mmc1: Unknown controller version (4). You may experience problems.
-mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA
-mmc2: Unknown controller version (4). You may experience problems.
-mmc2: Switching to 3.3V signalling voltage failed
-mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
-VDD_HDMI_5V0: supplied by VDD_5V0_SYS
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-08-22 15:58:38 UTC (1471881518)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address c6:ac:7b:cd:91:05
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
-dwmac4: Master AXI performs any burst length
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
-mmc2: new high speed MMC card at address 0001
-mmcblk2: mmc2:0001 032G34 29.1 GiB 
-mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
-mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
-mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-WARNING: CPU: 3 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
-Modules linked in:
-CPU: 3 PID: 40 Comm: kworker/u12:1 Tainted: G S               4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
-Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-IP-Config: Complete:
-Workqueue: events_power_efficient phy_state_machine
-     device=eth0, hwaddr=c6:ac:7b:cd:91:05, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-pstate: 80000085 (Nzcv daIf -PAN -UAO)
-pc : tegra_bpmp_transfer+0x2dc/0x368
-lr : tegra_bpmp_clk_transfer+0x94/0xd0
-     host=192.168.99.2, domain=, nis-domain=(none)
-sp : ffff000009f3bab0
-x29: ffff000009f3bab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 
-     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x26: ffff000008fffda8 
-x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4c34878 x22: 0000000000000080 
-x21: ffff000009f3bb58 x20: ffff000008fe9000 
-x19: ffff000009f3bbd8 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000a07bd88 x10: 0000000000000000 
-x9 : 00000000ffffffff x8 : ffff8001fff4f6e0 
-x7 : ffff00000c880000 x6 : ffff000009f3bb68 
-x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009f3bbc0 x2 : 0000000000000080 
-x1 : ffff000009f3bb68 x0 : ffff8001f65adc18 
-Call trace:
- tegra_bpmp_transfer+0x2dc/0x368
- tegra_bpmp_clk_transfer+0x94/0xd0
- tegra_bpmp_clk_round_rate+0x70/0xa4
- clk_core_determine_round_nolock+0x58/0xa0
- clk_core_round_rate_nolock+0x34/0x90
- clk_core_set_rate_nolock+0x5c/0x1c0
- clk_set_rate+0x30/0x8c
- tegra_eqos_fix_speed+0x1ac/0x250
- stmmac_adjust_link+0x1fc/0x230
- phy_link_change+0x54/0x60
- phy_state_machine+0x300/0x430
- process_one_work+0x124/0x290
- worker_thread+0x13c/0x3f8
- kthread+0xfc/0x128
- ret_from_fork+0x10/0x18
----[ end trace 93a0e4d7725b0d70 ]---
-WARNING: CPU: 3 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
-Modules linked in:
-CPU: 3 PID: 40 Comm: kworker/u12:1 Tainted: G S      W        4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 #1
-Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-Workqueue: events_power_efficient phy_state_machine
-pstate: 80000085 (Nzcv daIf -PAN -UAO)
-pc : tegra_bpmp_transfer+0x2dc/0x368
-lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009f3ba40
-x29: ffff000009f3ba40 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fffda8 
-x25: 0000000000000000 x24: 0000000000000001 
-x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009f3bae8 x20: ffff000008fe9000 
-x19: ffff000009f3bb68 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000a07bd88 x10: 0000000000000000 
-x9 : 00000000ffffffff x8 : ffff8001fff4f6e0 
-x7 : ffff00000c880000 x6 : ffff000009f3baf8 
-x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009f3bb50 x2 : 0000000000000080 
-x1 : ffff000009f3baf8 x0 : ffff8001f65adc18 
-Call trace:
- tegra_bpmp_transfer+0x2dc/0x368
- tegra_bpmp_clk_transfer+0x94/0xd0
- tegra_bpmp_clk_round_rate+0x70/0xa4
- clk_core_determine_round_nolock+0x58/0xa0
- clk_calc_new_rates+0x88/0x1d8
- clk_core_set_rate_nolock+0xac/0x1c0
- clk_set_rate+0x30/0x8c
- tegra_eqos_fix_speed+0x1ac/0x250
- stmmac_adjust_link+0x1fc/0x230
- phy_link_change+0x54/0x60
- phy_state_machine+0x300/0x430
- process_one_work+0x124/0x290
- worker_thread+0x13c/0x3f8
- kthread+0xfc/0x128
- ret_from_fork+0x10/0x18
----[ end trace 93a0e4d7725b0d71 ]---
-dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
-dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
-VDD_RTC: disabling
-VDDIO_SDMMC3_AP: disabling
-SD_CARD_SW_PWR: disabling
-VDD_HDMI_5V0: disabling
-ALSA device list:
-  No soundcards found.
-Freeing unused kernel memory: 1152K
-/init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Mon Aug 22 15:58:43 UTC 2016
-Root device found: nfs
-Ethernet interfaces: eth0
-ERROR: dhclient fail...
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-bash-4.3# [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
-I> Default Heap @ [0xd486400 - 0xd488400]
-I> DMA Heap @ [0x84900000 - 0x85300000]
-I> bit @ 0xd480000
-I> BR-BCT relocated to 0xf7f20000
-I> Boot-device: eMMC
-I> pmic: reset reason (nverc)	: 0x10
-I> Reading GPT from 512 for device 00000003
-I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
-I> Reading GPT from 512 for device 00010003
-I> Found 17 partitions in 00010003 device
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (16) slot 0
-I> Select partition: bpmp-fw
-I> Loading partition bpmp-fw at 0xf7600000
-I> Reading two headers - addr:0xf7600000 blocks:1
-I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
-I> Binary(16) of size 524480 is loaded @ 0xf7600000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (17) slot 0
-I> Select partition: bpmp-fw-dtb
-I> Loading partition bpmp-fw-dtb at 0xf77f0000
-I> Reading two headers - addr:0xf77f0000 blocks:1
-I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
-I> Binary(17) of size 326672 is loaded @ 0xf77b0200
-I> BPMP-FW load address = 0xf7600000
-I> BPMP-FW DTB load address = 0x501b0200
-I> Loading SCE-FW ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (12) slot 0
-I> Select partition: sce-fw
-I> Loading partition sce-fw at 0xf7800000
-I> Reading two headers - addr:0xf7800000 blocks:1
-I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
-I> Binary(12) of size 65088 is loaded @ 0xf7800000
-I> Init SCE
-I> Copy BTCM section
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (13) slot 0
-I> Select partition: cpu-bootloader
-I> Loading partition cpu-bootloader at 0x96000000
-I> Reading two headers - addr:0x96000000 blocks:1
-I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
-I> Binary(13) of size 195776 is loaded @ 0x96000000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (20) slot 0
-I> Select partition: bootloader-dtb
-I> Loading partition bootloader-dtb at 0x85300000
-I> Reading two headers - addr:0x85300000 blocks:1
-I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
-I> Binary(20) of size 248128 is loaded @ 0x85300000
-I> MB2-params @ 0xf7f00000
-I> CPUBL-params @ 0xf7f00000
-I> CPU-BL loaded at : 0x96000000
-I> Loading TOS ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (14) slot 0
-I> Select partition: secure-os
-I> Loading partition secure-os at 0x8490f400
-I> Reading two headers - addr:0x8490f400 blocks:1
-I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
-I> Binary(14) of size 54384 is loaded @ 0x8490f400
-I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
-I> Erasing Monitor @ 0x8490f600
-I> Unhalting SCE
-I> Waypoint2-ACK: 0x5200b8d0
-I> MB2(TBoot-BPMP) done
-
-NOTICE:  BL31: v1.2(release):ff7a644
-NOTICE:  BL31: Built : 21:06:35, Mar  1 2017
-NOTICE:  Trusty image missing.
-ERROR:   Error initializing runtime service trusty_fast
-I> Welcome to Cboot
-I> Cboot Version: 00.00.2014.50-t186-fabbc56c
-I> CPU-BL Params @ 0xf7f00000
-I>  0) Base:0x00000000 Size:0x00000000
-I>  1) Base:0xf7e00000 Size:0x00100000
-I>  2) Base:0xf7d00000 Size:0x00100000
-I>  3) Base:0xf7c00000 Size:0x00100000
-I>  4) Base:0xf7b00000 Size:0x00100000
-I>  5) Base:0xf7a00000 Size:0x00100000
-I>  6) Base:0xf7600000 Size:0x00200000
-I>  7) Base:0xf7000000 Size:0x00400000
-I>  8) Base:0xf7900000 Size:0x00100000
-I>  9) Base:0xf7800000 Size:0x00100000
-I> 10) Base:0xf6800000 Size:0x00800000
-I> 11) Base:0x30000000 Size:0x00040000
-I> 12) Base:0xf7500000 Size:0x00100000
-I> 13) Base:0x30040000 Size:0x00001000
-I> 14) Base:0x30048000 Size:0x00001000
-I> 15) Base:0x30049000 Size:0x00001000
-I> 16) Base:0x3004a000 Size:0x00001000
-I> 17) Base:0x3004b000 Size:0x00001000
-I> 18) Base:0x3004c000 Size:0x00001000
-I> 19) Base:0x3004d000 Size:0x00001000
-I> 20) Base:0x3004e000 Size:0x00001000
-I> 21) Base:0x3004f000 Size:0x00001000
-I> 22) Base:0x00000000 Size:0x00000000
-I> 23) Base:0xf7ff0000 Size:0x00010000
-I> 24) Base:0x00000000 Size:0x00000000
-I> 25) Base:0x00000000 Size:0x00000000
-I> 26) Base:0x00000000 Size:0x00000000
-I> 27) Base:0x00000000 Size:0x00000000
-I> 28) Base:0x84400000 Size:0x00400000
-I> 29) Base:0x30000000 Size:0x00010000
-I> 30) Base:0xf8000000 Size:0x08000000
-I> 31) Base:0x00000000 Size:0x00000000
-I> 32) Base:0xf6000000 Size:0x00600000
-I> 33) Base:0x80000000 Size:0x76000000
-I> 34) Base:0x100000000 Size:0x180000000
-I> 35) Base:0x00000000 Size:0x00000000
-I> 36) Base:0x00000000 Size:0x00000000
-I> 37) Base:0xf7fc0000 Size:0x00020000
-I> 38) Base:0x84000000 Size:0x00400000
-I> 39) Base:0x96000000 Size:0x02000000
-I> 40) Base:0x84800000 Size:0x00b00000
-I> 41) Base:0xf7f00000 Size:0x00080000
-I> 42) Base:0x00000000 Size:0x00000000
-I> 43) Base:0x00000000 Size:0x00000000
-platform_init_interrupts-121, 1*

-Interrupts Init done

-calling constructors

-initializing heap
-initializing threads

-initializing timers

-creating bootstrap completion thread

-top of bootstrap2()

-CPU: ARM Cortex A57

-CPU: MIDR: 0x411FD073, MPIDR: 0x80000100

-initializing platform

-I> Boot-device: eMMC
-I> odm data is 1090000
-I> Reading GPT from 512 for device 00000003
-I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
-I> Reading GPT from 512 for device 00010003
-I> Found 17 partitions in 00010003 device
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (1) slot 0
-I> Select partition: kernel-dtb
-I> Loading partition kernel-dtb at 0x92000000
-I> Kernel_dtb @0x92000000
-I> Bl_dtb @0x85300000
-I> gpio framework initialized
-I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
-I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
-I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
-I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
-I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
-I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
-E> tegrabl_blob_init: BMP partition does not have valid Blob
-E> tegrabl_load_bmp_blob: BMP blob initialization failed
-W> Loading bmp blob to memory failed
-I> Find /i2c@c250000's alias i2c7
-I> Reading eeprom i2c=7 address=0x50
-I> Device at /i2c@c250000:0x50
-I> Reading eeprom i2c=7 address=0x57
-I> Device at /i2c@c250000:0x57
-I> Find /i2c@c240000's alias i2c1
-I> Reading eeprom i2c=1 address=0x51
-I> Eeprom read failed 0x1a800027
-I> Find /i2c@3160000's alias i2c0
-I> Reading eeprom i2c=0 address=0x50
-I> Eeprom read failed 0x1a800027
-I> Find /i2c@3180000's alias i2c2
-I> Reading eeprom i2c=2 address=0x54
-I> Enabling gpio chip_id = 2, gpio pin = 9
-I> Disabling gpio chip_id = 2, gpio pin = 9
-I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-initializing target

-calling apps_init()

-starting app android_boot_app

-I> Gpio keyboard init success
-I> Kernel type = Normal
-I> Loading kernel/boot.img ...
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (0) slot 0
-I> Select partition: kernel
-I> Loading partition kernel at 0xa8000000
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> A/B: bin_type (1) slot 0
-I> Select partition: kernel-dtb
-I> Loading partition kernel-dtb at 0x92000000
-I> Kernel DTB @ 0x92000000
-I> Verified boot state = Orange
-E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
-I> Valid boot.img @ 0xa8000000
-I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265190) from 0xa8072800 to 0x98000000
-I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9966
-I> Updated initrd info to DTB
-I> disabled_core_mask: 0xffffff0c
-I> Kernel type = Normal
-I> add_serialno: Serial Num = 0321217203439
-W> No valid slot number is found in scratch register
-W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11153/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203439 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
-I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:8e:5e
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:8e:5f
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:8e:60
-E> "ids" doesn't exist, creating 
-E> "connection" doesn't exist, creating 
-E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-C, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
-E> "i2c@c250000" doesn't exist, creating 
-E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
-E> "module@0x57" doesn't eø
\ No newline at end of file
+tegra-ubuntu login: 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.387541305 -0800
+++ /tmp/foob	2018-01-29 21:53:25.387541305 -0800
@@ -48,9 +48,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.6 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8122880 (7bf200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7bf200 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 01:21:11 PST 2018
+Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -270,7 +270,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xa8ae9f84, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x61a3cb43, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.399541362 -0800
+++ /tmp/foob	2018-01-29 21:53:25.403541380 -0800
@@ -48,7 +48,7 @@
 	 ##################################
 	 4.1 MiB/s
 done
-Bytes transferred = 6216672 (5edbe0 hex)
+Bytes transferred = 6219008 (5ee500 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5edbe0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ee500 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:20:19 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x2083a7a8, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x40bc1e62, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -335,24 +335,24 @@
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
  mmcblk1: p1 p2
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-cfg80211: Loading compiled-in X.509 certificates for regulatory database
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
+rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 ALSA device list:
-cfg80211: failed to load regulatory.db
   #0: tegra-trimslice
 Waiting for root device PARTUUID=11eb23c1-01...
+cfg80211: failed to load regulatory.db
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.423541473 -0800
+++ /tmp/foob	2018-01-29 21:53:25.427541492 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 737453 us
-Basic modules init took 348667 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14367 us
-Carveout took 252672 us
-CPU initialization took 92452 us
-Total time taken by TegraBoot 708158 us
+Tegraboot started after 826721 us
+Basic modules init took 350363 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14372 us
+Carveout took 253273 us
+CPU initialization took 92444 us
+Total time taken by TegraBoot 710452 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.576] LPDDR4 Training: Number of tables = 10
+64b[0001.666] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,7 +117,7 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17457664 bytes read in 882 ms (18.9 MiB/s)
+17457664 bytes read in 876 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 01:25:24 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:37:56 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000084222251, 1 data @ 0000000041c56204)
+vdso: 2 pages (1 code @ 00000000eca4b8d6, 1 data @ 000000006677600c)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -296,9 +296,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.435541530 -0800
+++ /tmp/foob	2018-01-29 21:53:25.439541548 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 783565 us
-Basic modules init took 348974 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14365 us
-Carveout took 252672 us
-CPU initialization took 92445 us
-Total time taken by TegraBoot 708456 us
+Tegraboot started after 759236 us
+Basic modules init took 349811 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14362 us
+Carveout took 252661 us
+CPU initialization took 92441 us
+Total time taken by TegraBoot 709275 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.622] LPDDR4 Training: Number of tables = 10
+64b[0001.599] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17261056 bytes read in 861 ms (19.1 MiB/s)
+17261056 bytes read in 859 ms (19.2 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44914 bytes read in 454 ms (95.7 KiB/s)
+44914 bytes read in 453 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 01:31:28 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000babe0301, 1 data @ 00000000a52d2586)
+vdso: 2 pages (1 code @ 0000000034c857fe, 1 data @ 000000001b37bbd5)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -296,9 +296,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.499541828 -0800
+++ /tmp/foob	2018-01-29 21:53:25.499541828 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 01:31:28 PST 2018
+Linux version 4.15.0-next-20180130-230269-gadbc9f2 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Jan 29 21:40:59 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -99,7 +99,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000008a8ca63e, 1 data @ 000000000b83cc3f)
+vdso: 2 pages (1 code @ 0000000011056157, 1 data @ 00000000dee8367f)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -196,9 +196,9 @@
 max77620-ldo8: supplied by regulator-dummy
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -255,8 +255,8 @@
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-11-09 14:58:57 UTC (1005317937)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
+max77686-rtc max77620-rtc: setting system clock to 2001-11-10 11:07:19 UTC (1005390439)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 PP1200_AVDD: disabling
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.519541921 -0800
+++ /tmp/foob	2018-01-29 21:53:25.523541940 -0800
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8122880 (7bf200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 70.3 KiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bf200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-348356-g5f746ff40bf1 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 01:21:11 PST 2018
+Linux version 4.15.0-next-20180130-348510-gadbc9f27e641 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jan 29 21:34:59 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -376,7 +376,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xbe81b788, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xa20a2469, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -407,5 +407,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.094015] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.094014] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-29 21:53:25.539542015 -0800
+++ /tmp/foob	2018-01-29 21:53:25.543542033 -0800
@@ -40,18 +40,18 @@
 	 ##################################
 	 2.8 MiB/s
 done
-Bytes transferred = 6216672 (5edbe0 hex)
+Bytes transferred = 6219008 (5ee500 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5edbe0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ee500 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc9-next-20180129-28407-g5f746ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:20:19 PST 2018
+Linux version 4.15.0-next-20180130-28561-gadbc9f2 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 21:33:43 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x5e5e2434, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf2dadb5d, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.388580] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.368565] usb 2-1: new high-speed USB device number 2 using tegra-ehci
