U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.4 MiB/s done Bytes transferred = 6382744 (616498 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616498 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc9-next-20180129-230115-g5f746ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Jan 29 01:23:51 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017544] Switching to timer-based delay loop, resolution 1000ns [ 0.024084] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029764] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040512] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048483] Switching to timer-based delay loop, resolution 83ns [ 0.054664] Console: colour dummy device 80x30 [ 0.058891] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069202] pid_max: default: 32768 minimum: 301 [ 0.073966] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080383] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087727] CPU: Testing write buffer coherency: ok [ 0.092395] /cpus/cpu@0 missing clock-frequency property [ 0.097547] /cpus/cpu@1 missing clock-frequency property [ 0.102842] /cpus/cpu@2 missing clock-frequency property [ 0.108120] /cpus/cpu@3 missing clock-frequency property [ 0.113402] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153445] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158102] Hierarchical SRCU implementation. [ 0.173668] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193450] smp: Bringing up secondary CPUs ... [ 0.243698] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323724] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403764] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413594] smp: Brought up 1 node, 4 CPUs [ 0.432678] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438830] CPU: All CPU(s) started in SVC mode. [ 0.444124] devtmpfs: initialized [ 0.453458] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458508] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466122] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475748] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482034] pinctrl core: initialized pinctrl subsystem [ 0.487564] NET: Registered protocol family 16 [ 0.491969] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498876] cpuidle: using governor menu [ 0.509787] No ATAGs? [ 0.509848] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518191] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524880] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532553] iommu: Adding device 50000000.host1x to group 0 [ 0.537965] iommu: Adding device 54200000.dc to group 1 [ 0.543167] iommu: Adding device 54240000.dc to group 1 [ 0.548366] iommu: Adding device 57000000.gpu to group 2 [ 0.559416] +5V_SYS: supplied by +VDD_MUX [ 0.561644] +3.3V_SYS: supplied by +VDD_MUX [ 0.565967] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571303] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579405] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585342] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593456] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599209] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607324] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613076] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621246] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628069] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636257] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642108] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650707] vgaarb: loaded [ 0.653206] SCSI subsystem initialized [ 0.656761] libata version 3.00 loaded. [ 0.660608] usbcore: registered new interface driver usbfs [ 0.665966] usbcore: registered new interface driver hub [ 0.671273] usbcore: registered new device driver usb [ 0.677489] Linux video capture interface: v2.00 [ 0.680876] pps_core: LinuxPPS API ver. 1 registered [ 0.685795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694900] PTP clock support registered [ 0.698936] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706160] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712332] Advanced Linux Sound Architecture Driver Initialized. [ 0.718539] Bluetooth: Core ver 2.22 [ 0.721860] NET: Registered protocol family 31 [ 0.726271] Bluetooth: HCI device and connection manager initialized [ 0.732590] Bluetooth: HCI socket layer initialized [ 0.737448] Bluetooth: L2CAP socket layer initialized [ 0.742483] Bluetooth: SCO socket layer initialized [ 0.747564] clocksource: Switched to clocksource arch_sys_counter [ 0.785733] NET: Registered protocol family 2 [ 0.788555] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795821] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802866] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809300] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815734] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821476] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827907] NET: Registered protocol family 1 [ 0.832404] RPC: Registered named UNIX socket transport module. [ 0.838017] RPC: Registered udp transport module. [ 0.842686] RPC: Registered tcp transport module. [ 0.847366] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864033] PCI: CLS 0 bytes, default 64 [ 0.866739] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.874847] Initialise system trusted keyrings [ 0.878687] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885495] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891120] NFS: Registering the id_resolver key type [ 0.895859] Key type id_resolver registered [ 0.900021] Key type id_legacy registered [ 0.905772] Key type asymmetric registered [ 0.908081] Asymmetric key parser 'x509' registered [ 0.912973] bounce: pool size: 64 pages [ 0.916759] io scheduler noop registered (default) [ 0.921511] io scheduler mq-deadline registered [ 0.926010] io scheduler kyber registered [ 0.930647] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.943085] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.949180] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.957972] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964750] console [ttyS0] disabled [ 0.967652] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976568] console [ttyS0] enabled [ 0.976568] console [ttyS0] enabled [ 0.982801] bootconsole [earlycon0] disabled [ 0.982801] bootconsole [earlycon0] disabled [ 1.008934] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015410] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.022935] panel-simple panel: panel supply power not found, using dummy regulator [ 1.034355] loop: module loaded [ 1.038084] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048123] as3722-sd2: supplied by +5V_SYS [ 1.052547] as3722-sd3: supplied by +5V_SYS [ 1.056882] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063070] as3722-sd4: supplied by +5V_SYS [ 1.067403] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.073164] as3722-sd5: supplied by +5V_SYS [ 1.078773] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084520] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090547] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096176] as3722-ldo3: supplied by +3.3V_SYS [ 1.100641] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.108219] as3722-ldo4: supplied by +3.3V_SYS [ 1.112815] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118847] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123619] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.130319] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.136353] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141134] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147687] as3722-ldo9: supplied by +5V_SYS [ 1.152257] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158468] as3722-ldo10: supplied by +5V_SYS [ 1.162980] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169434] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.191867] cros-ec-spi spi0.0: Chrome EC device registered [ 1.206731] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.212248] libphy: Fixed MDIO Bus: probed [ 1.216333] CAN device driver interface [ 1.220193] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227136] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.232751] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240185] usbcore: registered new interface driver pegasus [ 1.245852] usbcore: registered new interface driver asix [ 1.251271] usbcore: registered new interface driver ax88179_178a [ 1.257369] usbcore: registered new interface driver cdc_ether [ 1.263218] usbcore: registered new interface driver smsc75xx [ 1.268979] usbcore: registered new interface driver smsc95xx [ 1.274726] usbcore: registered new interface driver net1080 [ 1.280399] usbcore: registered new interface driver cdc_subset [ 1.286321] usbcore: registered new interface driver zaurus [ 1.291912] usbcore: registered new interface driver cdc_ncm [ 1.297650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304161] ehci-pci: EHCI PCI platform driver [ 1.308622] tegra-ehci: Tegra EHCI driver [ 1.312886] usbcore: registered new interface driver cdc_acm [ 1.318538] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.326540] usbcore: registered new interface driver cdc_wdm [ 1.332214] usbcore: registered new interface driver usb-storage [ 1.338878] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.358497] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.365355] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.372123] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.379269] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.385549] i2c /dev entries driver [ 1.389463] usbcore: registered new interface driver uvcvideo [ 1.395194] USB Video Class driver (1.1.1) [ 1.399287] gspca_main: v2.14.0 registered [ 1.403603] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.412267] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.420605] sdhci: Secure Digital Host Controller Interface driver [ 1.426769] sdhci: Copyright(c) Pierre Ossman [ 1.431126] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436899] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.450703] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.455574] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475700] mmc0: Unknown controller version (3). You may experience problems. [ 1.482941] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519722] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527434] usbcore: registered new interface driver usbhid [ 1.533116] usbhid: USB HID core driver [ 1.539262] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587477] mmc0: new high speed MMC card at address 0001 [ 1.593398] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594884] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604110] max98090 0-0010: use default 2.8v micbias [ 1.604389] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.616946] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.622983] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623170] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.637873] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.639763] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.645855] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.659848] NET: Registered protocol family 10 [ 1.664866] Segment Routing with IPv6 [ 1.668594] mip6: Mobile IPv6 [ 1.671553] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678015] NET: Registered protocol family 17 [ 1.682452] NET: Registered protocol family 15 [ 1.686883] can: controller area network core (rev 20170425 abi 9) [ 1.693136] NET: Registered protocol family 29 [ 1.697574] can: raw protocol (rev 20170425) [ 1.701832] can: broadcast manager protocol (rev 20170425 t) [ 1.707478] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713026] Bluetooth: RFCOMM socket layer initialized [ 1.718171] Bluetooth: RFCOMM ver 1.11 [ 1.721913] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727212] Bluetooth: BNEP socket layer initialized [ 1.732168] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738079] Bluetooth: HIDP socket layer initialized [ 1.743119] Key type dns_resolver registered [ 1.747580] Registering SWP/SWPB emulation handler [ 1.752620] Loading compiled-in X.509 certificates [ 1.764529] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769461] +VDD_LED: supplied by +VDD_MUX [ 1.773657] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779390] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.784098] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.788839] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.794015] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.798745] +5V_USB_HS: supplied by +5V_SYS [ 1.803064] +5V_USB_SS: supplied by +5V_SYS [ 1.808091] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.813588] +3.3V_LP0: supplied by +3.3V_SYS [ 1.818540] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.824459] +5V_HDMI_CON: supplied by +5V_SYS [ 1.829562] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.836295] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.849442] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.855659] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928301] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935698] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941139] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950654] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959284] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965657] hub 1-0:1.0: USB hub found [ 1.969484] hub 1-0:1.0: 6 ports detected [ 1.973857] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979258] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.986922] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995424] hub 2-0:1.0: USB hub found [ 1.999236] hub 2-0:1.0: 2 ports detected [ 2.004257] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017789] mmc1: Unknown controller version (3). You may experience problems. [ 2.025035] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031510] mmc1: Switching to 3.3V signalling voltage failed [ 2.060302] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.067942] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.072814] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083055] mmc2: Unknown controller version (3). You may experience problems. [ 2.090394] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126106] mmc1: new high speed SDIO card at address 0001 [ 2.131934] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139545] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145706] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153822] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160453] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166676] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174624] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 2.183426] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193336] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200182] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208859] cfg80211: failed to load regulatory.db [ 2.213926] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.218519] +1.8V_RUN_CAM: disabling [ 2.222274] +1.2V_RUN_CAM_FRONT: disabling [ 2.226582] +1.05V_RUN_CAM_REAR: disabling [ 2.230922] +2.8V_RUN_TOUCH: disabling [ 2.234888] +2.8V_RUN_CAM_AF: disabling [ 2.239148] +1.8V_RUN_VPP_FUSE: disabling [ 2.243322] +VDD_LED: disabling [ 2.246519] +5V_VDD_TS_SW: disabling [ 2.250185] +3.3V_PANEL: disabling [ 2.253621] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.258211] +5V_HDMI_CON: disabling [ 2.261735] ALSA device list: [ 2.264707] #1: GoogleNyanBig [ 2.298098] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.304412] panel-simple panel: panel supply power not found, using dummy regulator [ 2.312564] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.321023] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.357605] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.392802] mmc2: new high speed SDHC card at address 0007 [ 2.400148] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.412966] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.419151] GPT:3014591 != 15564799 [ 2.422628] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.430011] GPT:3014591 != 15564799 [ 2.433488] GPT: Use GNU Parted to correct GPT errors. [ 2.438739] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.445718] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.451971] panel-simple panel: panel supply power not found, using dummy regulator [ 2.657331] EXT4-fs (mmcblk0p3): recovery complete [ 2.662151] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.670283] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.677300] devtmpfs: mounted [ 2.680882] Freeing unused kernel memory: 1024K [ 2.685471] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.700386] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.710123] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.716353] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.908253] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.913939] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.919295] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.924599] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.929908] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.935210] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.940521] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.945823] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.951133] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.956436] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.107658] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.776648] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.787661] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.793822] panel-simple panel: panel supply power not found, using dummy regulator [ 4.127657] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.315937] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.322869] scsi host0: usb-storage 1-1:1.0 [ 4.327476] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.333671] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399351] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408072] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414305] panel-simple panel: panel supply power not found, using dummy regulator [ 5.605391] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.614222] sd 0:0:0:0: [sda] Write Protect is off [ 5.619101] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 rtcwake -d rtc1 -m mem -s 3 [ 5.625689] sd 0:0:0:0: [sda] No Caching mode page found [ 5.632052] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:2[ 5.660076] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 9 1970 [ 5.675047] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.688941] PM: suspend entry (deep) [ 5.692509] PM: Syncing filesystems ... done. [ 5.698569] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.706615] OOM killer disabled. [ 5.709872] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.718497] Suspending console(s) (use no_console_suspend to debug) [ 5.911875] Disabling non-boot CPUs ... [ 5.957773] IRQ17 no longer affine to CPU1 [ 6.088243] Entering suspend state LP1 [ 6.088268] Enabling non-boot CPUs ... [ 6.088983] CPU1 is up [ 6.089568] CPU2 is up [ 6.090221] CPU3 is up [ 6.131387] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.143695] mmc1: Switching to 3.3V signalling voltage failed [ 6.358123] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.672108] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.672273] panel-simple panel: panel supply power not found, using dummy regulator [ 6.726592] OOM killer enabled. [ 6.729738] Restarting tasks ... done. [ 6.734025] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.825370] PM: suspend entry (deep) [ 7.828954] PM: Syncing filesystems ... done. [ 7.834414] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.842500] OOM killer disabled. [ 7.845717] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.854323] Suspending console(s) (use no_console_suspend to debug) [ 8.041431] Disabling non-boot CPUs ... [ 8.188222] Entering suspend state LP1 [ 8.188247] Enabling non-boot CPUs ... [ 8.189001] CPU1 is up [ 8.189613] CPU2 is up [ 8.190275] CPU3 is up [ 8.241490] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.254011] mmc1: Switching to 3.3V signalling voltage failed [ 8.468034] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.782573] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.782740] panel-simple panel: panel supply power not found, using dummy regulator [ 8.832977] OOM killer enabled. [ 8.836106] Restarting tasks ... done. [ 8.840748] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 9.925434] PM: suspend entry (deep) [ 9.929010] PM: Syncing filesystems ... done. [ 9.934468] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.942554] OOM killer disabled. [ 9.945770] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.954379] Suspending console(s) (use no_console_suspend to debug) [ 10.141428] Disabling non-boot CPUs ... [ 10.288183] Entering suspend state LP1 [ 10.288208] Enabling non-boot CPUs ... [ 10.288966] CPU1 is up [ 10.289583] CPU2 is up [ 10.290246] CPU3 is up [ 10.341467] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.353639] mmc1: Switching to 3.3V signalling voltage failed [ 10.882704] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.882872] panel-simple panel: panel supply power not found, using dummy regulator [ 10.926245] OOM killer enabled. [ 10.929387] Restarting tasks ... done. [ 10.933677] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 12.025407] PM: suspend entry (deep) [ 12.028984] PM: Syncing filesystems ... done. [ 12.034447] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.042531] OOM killer disabled. [ 12.045747] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.054354] Suspending console(s) (use no_console_suspend to debug) [ 12.241512] Disabling non-boot CPUs ... [ 12.387646] IRQ17 no longer affine to CPU3 [ 12.388194] Entering suspend state LP1 [ 12.388219] Enabling non-boot CPUs ... [ 12.388974] CPU1 is up [ 12.389590] CPU2 is up [ 12.390249] CPU3 is up [ 12.441648] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.453977] mmc1: Switching to 3.3V signalling voltage failed [ 12.981333] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.981499] panel-simple panel: panel supply power not found, using dummy regulator [ 13.028968] OOM killer enabled. [ 13.032098] Restarting tasks ... done. [ 13.036329] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 14.126306] PM: suspend entry (deep) [ 14.129894] PM: Syncing filesystems ... done. [ 14.135289] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.143377] OOM killer disabled. [ 14.146593] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.155182] Suspending console(s) (use no_console_suspend to debug) [ 14.341326] Disabling non-boot CPUs ... [ 14.488147] Entering suspend state LP1 [ 14.488172] Enabling non-boot CPUs ... [ 14.488930] CPU1 is up [ 14.489542] CPU2 is up [ 14.490202] CPU3 is up [ 14.541408] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.553495] mmc1: Switching to 3.3V signalling voltage failed [ 15.081504] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.081670] panel-simple panel: panel supply power not found, using dummy regulator [ 15.125042] OOM killer enabled. [ 15.128184] Restarting tasks ... done. [ 15.132448] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 16.227422] PM: suspend entry (deep) [ 16.231021] PM: Syncing filesystems ... done. [ 16.236617] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.244790] OOM killer disabled. [ 16.248027] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.256631] Suspending console(s) (use no_console_suspend to debug) [ 16.441506] Disabling non-boot CPUs ... [ 16.588111] Entering suspend state LP1 [ 16.588137] Enabling non-boot CPUs ... [ 16.588893] CPU1 is up [ 16.589505] CPU2 is up [ 16.590172] CPU3 is up [ 16.641591] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.653698] mmc1: Switching to 3.3V signalling voltage failed [ 17.182424] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.182590] panel-simple panel: panel supply power not found, using dummy regulator [ 17.226015] OOM killer enabled. [ 17.229181] Restarting tasks ... done. [ 17.233580] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 18.327330] PM: suspend entry (deep) [ 18.330928] PM: Syncing filesystems ... done. [ 18.336670] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.344757] OOM killer disabled. [ 18.347988] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.356570] Suspending console(s) (use no_console_suspend to debug) [ 18.541417] Disabling non-boot CPUs ... [ 18.718132] Entering suspend state LP1 [ 18.718157] Enabling non-boot CPUs ... [ 18.718913] CPU1 is up [ 18.719526] CPU2 is up [ 18.720192] CPU3 is up [ 18.771357] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.783585] mmc1: Switching to 3.3V signalling voltage failed [ 19.318428] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.318637] panel-simple panel: panel supply power not found, using dummy regulator [ 19.354457] OOM killer enabled. [ 19.357637] Restarting tasks ... done. [ 19.362258] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 20.457377] PM: suspend entry (deep) [ 20.460977] PM: Syncing filesystems ... done. [ 20.466739] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.474914] OOM killer disabled. [ 20.478152] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.486748] Suspending console(s) (use no_console_suspend to debug) [ 20.671406] Disabling non-boot CPUs ... [ 20.848086] Entering suspend state LP1 [ 20.848111] Enabling non-boot CPUs ... [ 20.848869] CPU1 is up [ 20.849494] CPU2 is up [ 20.850153] CPU3 is up [ 20.901334] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.913736] mmc1: Switching to 3.3V signalling voltage failed [ 21.127843] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.441739] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.441907] panel-simple panel: panel supply power not found, using dummy regulator [ 21.492160] OOM killer enabled. [ 21.495290] Restarting tasks ... done. [ 21.499589] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 22.585284] PM: suspend entry (deep) [ 22.588860] PM: Syncing filesystems ... done. [ 22.594317] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.602403] OOM killer disabled. [ 22.605619] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.614219] Suspending console(s) (use no_console_suspend to debug) [ 22.801270] Disabling non-boot CPUs ... [ 22.968059] Entering suspend state LP1 [ 22.968084] Enabling non-boot CPUs ... [ 22.968841] CPU1 is up [ 22.969461] CPU2 is up [ 22.970120] CPU3 is up [ 23.011456] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.023633] mmc1: Switching to 3.3V signalling voltage failed [ 23.552685] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.552853] panel-simple panel: panel supply power not found, using dummy regulator [ 23.596228] OOM killer enabled. [ 23.599370] Restarting tasks ... done. [ 23.603759] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 24.705267] PM: suspend entry (deep) [ 24.708843] PM: Syncing filesystems ... done. [ 24.714302] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.722388] OOM killer disabled. [ 24.725604] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.734202] Suspending console(s) (use no_console_suspend to debug) [ 24.921331] Disabling non-boot CPUs ... [ 25.088016] Entering suspend state LP1 [ 25.088041] Enabling non-boot CPUs ... [ 25.088795] CPU1 is up [ 25.089419] CPU2 is up [ 25.090083] CPU3 is up [ 25.131422] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.143637] mmc1: Switching to 3.3V signalling voltage failed [ 25.672502] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.672669] panel-simple panel: panel supply power not found, using dummy regulator [ 25.716046] OOM killer enabled. [ 25.719188] Restarting tasks ... done. [ 25.723472] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE