U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.2 MiB/s done Bytes transferred = 6378824 (615548 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.9 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x615548 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc9-next-20180126-229715-gf0701bf (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:19:27 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017557] Switching to timer-based delay loop, resolution 1000ns [ 0.024101] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029777] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040524] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048495] Switching to timer-based delay loop, resolution 83ns [ 0.054669] Console: colour dummy device 80x30 [ 0.058904] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069213] pid_max: default: 32768 minimum: 301 [ 0.073979] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080395] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087732] CPU: Testing write buffer coherency: ok [ 0.092408] /cpus/cpu@0 missing clock-frequency property [ 0.097558] /cpus/cpu@1 missing clock-frequency property [ 0.102854] /cpus/cpu@2 missing clock-frequency property [ 0.108132] /cpus/cpu@3 missing clock-frequency property [ 0.113415] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153458] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158113] Hierarchical SRCU implementation. [ 0.173680] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193462] smp: Bringing up secondary CPUs ... [ 0.243710] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323739] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403777] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413608] smp: Brought up 1 node, 4 CPUs [ 0.432692] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438845] CPU: All CPU(s) started in SVC mode. [ 0.444131] devtmpfs: initialized [ 0.453618] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458664] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475908] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482184] pinctrl core: initialized pinctrl subsystem [ 0.487721] NET: Registered protocol family 16 [ 0.492131] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499042] cpuidle: using governor menu [ 0.509906] No ATAGs? [ 0.509965] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518307] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524983] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532672] iommu: Adding device 50000000.host1x to group 0 [ 0.538082] iommu: Adding device 54200000.dc to group 1 [ 0.543284] iommu: Adding device 54240000.dc to group 1 [ 0.548483] iommu: Adding device 57000000.gpu to group 2 [ 0.559565] +5V_SYS: supplied by +VDD_MUX [ 0.561792] +3.3V_SYS: supplied by +VDD_MUX [ 0.566116] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571451] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579555] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585491] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593605] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599357] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607486] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613224] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621396] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628217] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636414] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642257] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650848] vgaarb: loaded [ 0.653356] SCSI subsystem initialized [ 0.660469] libata version 3.00 loaded. [ 0.662503] usbcore: registered new interface driver usbfs [ 0.667868] usbcore: registered new interface driver hub [ 0.673186] usbcore: registered new device driver usb [ 0.679393] Linux video capture interface: v2.00 [ 0.682777] pps_core: LinuxPPS API ver. 1 registered [ 0.687702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.696805] PTP clock support registered [ 0.700841] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.708065] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714236] Advanced Linux Sound Architecture Driver Initialized. [ 0.720444] Bluetooth: Core ver 2.22 [ 0.723764] NET: Registered protocol family 31 [ 0.728173] Bluetooth: HCI device and connection manager initialized [ 0.734495] Bluetooth: HCI socket layer initialized [ 0.739353] Bluetooth: L2CAP socket layer initialized [ 0.744388] Bluetooth: SCO socket layer initialized [ 0.749474] clocksource: Switched to clocksource arch_sys_counter [ 0.788386] NET: Registered protocol family 2 [ 0.791216] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.798474] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.805519] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.811952] TCP: Hash tables configured (established 8192 bind 8192) [ 0.818390] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.824128] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.830561] NET: Registered protocol family 1 [ 0.835059] RPC: Registered named UNIX socket transport module. [ 0.840669] RPC: Registered udp transport module. [ 0.845339] RPC: Registered tcp transport module. [ 0.850026] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.856665] PCI: CLS 0 bytes, default 64 [ 0.861033] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.869126] Initialise system trusted keyrings [ 0.872988] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.879812] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.895402] NFS: Registering the id_resolver key type [ 0.898540] Key type id_resolver registered [ 0.902707] Key type id_legacy registered [ 0.908412] Key type asymmetric registered [ 0.910766] Asymmetric key parser 'x509' registered [ 0.915656] bounce: pool size: 64 pages [ 0.919440] io scheduler noop registered (default) [ 0.924194] io scheduler mq-deadline registered [ 0.928693] io scheduler kyber registered [ 0.933321] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.945725] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.951814] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.960618] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.967388] console [ttyS0] disabled [ 0.970377] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.979207] console [ttyS0] enabled [ 0.979207] console [ttyS0] enabled [ 0.985453] bootconsole [earlycon0] disabled [ 0.985453] bootconsole [earlycon0] disabled [ 1.009728] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.016204] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.023734] panel-simple panel: panel supply power not found, using dummy regulator [ 1.035159] loop: module loaded [ 1.038857] as3722 4-0040: AS3722 with revision 0x1 found [ 1.048944] as3722-sd2: supplied by +5V_SYS [ 1.053384] as3722-sd3: supplied by +5V_SYS [ 1.057720] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.063909] as3722-sd4: supplied by +5V_SYS [ 1.068242] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074000] as3722-sd5: supplied by +5V_SYS [ 1.079598] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085346] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091372] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.096995] as3722-ldo3: supplied by +3.3V_SYS [ 1.101462] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109038] as3722-ldo4: supplied by +3.3V_SYS [ 1.113643] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119663] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.124434] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131132] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137168] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.141949] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.148502] as3722-ldo9: supplied by +5V_SYS [ 1.153080] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159283] as3722-ldo10: supplied by +5V_SYS [ 1.163805] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170258] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192680] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207587] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213097] libphy: Fixed MDIO Bus: probed [ 1.217182] CAN device driver interface [ 1.221042] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227985] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233599] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241042] usbcore: registered new interface driver pegasus [ 1.246709] usbcore: registered new interface driver asix [ 1.252125] usbcore: registered new interface driver ax88179_178a [ 1.258221] usbcore: registered new interface driver cdc_ether [ 1.264071] usbcore: registered new interface driver smsc75xx [ 1.269834] usbcore: registered new interface driver smsc95xx [ 1.275582] usbcore: registered new interface driver net1080 [ 1.281252] usbcore: registered new interface driver cdc_subset [ 1.287175] usbcore: registered new interface driver zaurus [ 1.292768] usbcore: registered new interface driver cdc_ncm [ 1.298504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305022] ehci-pci: EHCI PCI platform driver [ 1.309480] tegra-ehci: Tegra EHCI driver [ 1.313745] usbcore: registered new interface driver cdc_acm [ 1.319389] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327400] usbcore: registered new interface driver cdc_wdm [ 1.333074] usbcore: registered new interface driver usb-storage [ 1.339746] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359423] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366290] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373052] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380198] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386475] i2c /dev entries driver [ 1.390397] usbcore: registered new interface driver uvcvideo [ 1.396128] USB Video Class driver (1.1.1) [ 1.400219] gspca_main: v2.14.0 registered [ 1.404537] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413200] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421548] sdhci: Secure Digital Host Controller Interface driver [ 1.427711] sdhci: Copyright(c) Pierre Ossman [ 1.432066] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.437836] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.451643] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.456514] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.477571] mmc0: Unknown controller version (3). You may experience problems. [ 1.484813] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.521596] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.529306] usbcore: registered new interface driver usbhid [ 1.534984] usbhid: USB HID core driver [ 1.541110] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.589321] mmc0: new high speed MMC card at address 0001 [ 1.595241] max98090 0-0010: MAX98090 REVID=0x43 [ 1.596670] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.606025] max98090 0-0010: use default 2.8v micbias [ 1.606228] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.618851] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.624891] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.625072] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.639836] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.641683] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.647810] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.661801] NET: Registered protocol family 10 [ 1.666827] Segment Routing with IPv6 [ 1.670554] mip6: Mobile IPv6 [ 1.673514] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.679963] NET: Registered protocol family 17 [ 1.684402] NET: Registered protocol family 15 [ 1.688832] can: controller area network core (rev 20170425 abi 9) [ 1.695084] NET: Registered protocol family 29 [ 1.699524] can: raw protocol (rev 20170425) [ 1.703782] can: broadcast manager protocol (rev 20170425 t) [ 1.709428] can: netlink gateway (rev 20170425) max_hops=1 [ 1.714988] Bluetooth: RFCOMM socket layer initialized [ 1.720131] Bluetooth: RFCOMM ver 1.11 [ 1.723873] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.729174] Bluetooth: BNEP socket layer initialized [ 1.734131] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.740041] Bluetooth: HIDP socket layer initialized [ 1.745086] Key type dns_resolver registered [ 1.749556] Registering SWP/SWPB emulation handler [ 1.754597] Loading compiled-in X.509 certificates [ 1.766727] +3.3V_RUN: supplied by +3.3V_SYS [ 1.771673] +VDD_LED: supplied by +VDD_MUX [ 1.775870] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.781604] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.786307] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791045] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.796224] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.800953] +5V_USB_HS: supplied by +5V_SYS [ 1.805274] +5V_USB_SS: supplied by +5V_SYS [ 1.810547] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816019] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821027] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.826842] +5V_HDMI_CON: supplied by +5V_SYS [ 1.831945] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.838679] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.851883] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.858094] panel-simple panel: panel supply power not found, using dummy regulator [ 1.930208] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.937605] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.943044] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.952563] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.961190] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.967568] hub 1-0:1.0: USB hub found [ 1.971396] hub 1-0:1.0: 6 ports detected [ 1.975766] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.981170] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.988833] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.997328] hub 2-0:1.0: USB hub found [ 2.001140] hub 2-0:1.0: 2 ports detected [ 2.006157] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.019701] mmc1: Unknown controller version (3). You may experience problems. [ 2.026946] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.033421] mmc1: Switching to 3.3V signalling voltage failed [ 2.062220] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.069863] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.074734] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.084968] mmc2: Unknown controller version (3). You may experience problems. [ 2.092307] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.127970] mmc1: new high speed SDIO card at address 0001 [ 2.133797] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.141401] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.147563] panel-simple panel: panel supply power not found, using dummy regulator [ 2.155677] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.162318] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.168542] panel-simple panel: panel supply power not found, using dummy regulator [ 2.176491] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.185292] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.195082] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.201914] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.209891] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.210542] cfg80211: failed to load regulatory.db [ 2.215101] +1.8V_RUN_CAM: disabling [ 2.223643] +1.2V_RUN_CAM_FRONT: disabling [ 2.227905] +1.05V_RUN_CAM_REAR: disabling [ 2.232249] +2.8V_RUN_TOUCH: disabling [ 2.236108] +2.8V_RUN_CAM_AF: disabling [ 2.240460] +1.8V_RUN_VPP_FUSE: disabling [ 2.244639] +VDD_LED: disabling [ 2.247807] +5V_VDD_TS_SW: disabling [ 2.251418] +3.3V_PANEL: disabling [ 2.254812] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.259370] +5V_HDMI_CON: disabling [ 2.262930] ALSA device list: [ 2.265899] #1: GoogleNyanBig [ 2.299973] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.306283] panel-simple panel: panel supply power not found, using dummy regulator [ 2.314429] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.322880] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.339502] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.356874] mmc2: new high speed SDHC card at address 0007 [ 2.364263] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.376835] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.383060] GPT:3014591 != 15564799 [ 2.386539] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.393951] GPT:3014591 != 15564799 [ 2.397429] GPT: Use GNU Parted to correct GPT errors. [ 2.402635] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.409635] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.415796] panel-simple panel: panel supply power not found, using dummy regulator [ 2.522425] EXT4-fs (mmcblk0p3): recovery complete [ 2.527934] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.536072] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.542696] devtmpfs: mounted [ 2.546105] Freeing unused kernel memory: 1024K [ 2.591797] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.597150] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.602770] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.608319] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.614119] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.619773] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.625354] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.630998] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.636796] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.642686] alloc_contig_range: [fbca1, fbca2) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.722134] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.736813] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.746299] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.752467] panel-simple panel: panel supply power not found, using dummy regulator [ 3.089565] usb 1-3: new high-speed USB device number 3 using tegra-xusb