Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:21.874873309 -0800
+++ /tmp/foob	2018-01-25 19:46:21.878873327 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 25 19:26:17 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -20,14 +20,14 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: Trusted OS migration not required
 random: fast init done
-percpu: Embedded 24 pages/cpu @        (ptrval) s57600 r8192 d32512 u98304
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA32
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998324K/1048576K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 33868K reserved, 16384K cma-reserved)
+Memory: 998256K/1048576K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 33936K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -57,7 +57,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 253677
+Built 1 zonelists, mobility grouping on.  Total pages: 253660
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -65,9 +65,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000f3d43bc2, 1 data @ 0000000022de8c94)
+vdso: 2 pages (1 code @ 0000000042c0158c, 1 data @ 000000008ea4b140)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -120,16 +120,17 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
 pl061_gpio 9030000.pl061: PL061 GPIO chip @0x0000000009030000 registered
-OF: PCI: host bridge /pcie@10000000 ranges:
-OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
-OF: PCI:   MEM 0x10000000..0x3efeffff -> 0x10000000
-OF: PCI:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
+PCI: OF: host bridge /pcie@10000000 ranges:
+PCI: OF:    IO 0x3eff0000..0x3effffff -> 0x00000000
+PCI: OF:   MEM 0x10000000..0x3efeffff -> 0x10000000
+PCI: OF:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
 pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
 pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [bus 00-0f]
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
 pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
+EINJ: ACPI disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
@@ -173,7 +174,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-23 18:35:23 UTC (1516732523)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-26 03:33:24 UTC (1516937604)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:21.914873492 -0800
+++ /tmp/foob	2018-01-25 19:46:21.914873492 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3.3 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 25 19:19:57 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992584K/2096128K available (11264K kernel code, 1564K rwdata, 4336K rodata, 2048K init, 405K bss, 38008K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992580K/2096128K available (11264K kernel code, 1568K rwdata, 4336K rodata, 2048K init, 405K bss, 38012K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,7 +94,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1565 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1569 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -134,7 +134,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 514530
+Built 1 zonelists, mobility grouping on.  Total pages: 514529
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -320,8 +320,8 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
-usb1_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -353,7 +353,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-16 00:46:18 UTC (961116378)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-18 10:25:31 UTC (961323931)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -365,4 +365,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.739209] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.729444] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:21.950873657 -0800
+++ /tmp/foob	2018-01-25 19:46:21.954873675 -0800
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 6214528 (5ed380 hex)
+Bytes transferred = 6215440 (5ed710 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ed380 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ed710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:18:48 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -81,7 +81,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998596K/2096128K available (9216K kernel code, 782K rwdata, 2584K rodata, 1024K init, 298K bss, 31996K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998596K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 31996K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-16 00:35:14 UTC (961115714)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-18 10:22:50 UTC (961323770)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,4 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.368457] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.376481] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:21.966873730 -0800
+++ /tmp/foob	2018-01-25 19:46:21.970873749 -0800
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.5 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 25 19:19:57 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992476K/2096128K available (11264K kernel code, 1564K rwdata, 4336K rodata, 2048K init, 405K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992472K/2096128K available (11264K kernel code, 1568K rwdata, 4336K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,7 +89,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1565 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1569 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -129,7 +129,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 514503
+Built 1 zonelists, mobility grouping on.  Total pages: 514502
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -323,12 +323,18 @@
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
 +3.3V_LP0: supplied by +3.3V_SYS
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 +5V_HDMI_CON: supplied by +5V_SYS
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 +5V_SATA: supplied by +5V_SYS
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
+ mmcblk0: p1
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
@@ -345,16 +351,10 @@
 as3722-ldo5: supplied by +1.8V_VDDIO
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
- mmcblk0: p1
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
@@ -443,7 +443,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xe07c6878, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x48aaa79c, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -455,7 +455,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:09 UTC (946685049)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:21.986873822 -0800
+++ /tmp/foob	2018-01-25 19:46:21.990873841 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 4 MiB/s
+	 941.4 KiB/s
 done
-Bytes transferred = 6214528 (5ed380 hex)
+Bytes transferred = 6215440 (5ed710 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 915 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ed380 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ed710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:18:48 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998488K/2096128K available (9216K kernel code, 782K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998488K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,7 +86,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9dea3628, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x4f76d7b2, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -450,12 +450,12 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:18 UTC (946684818)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-+USB0_VBUS_SW: disabling
 cfg80211: failed to load regulatory.db
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.002873896 -0800
+++ /tmp/foob	2018-01-25 19:46:22.006873914 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.4 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6377936 (6151d0 hex)
+Bytes transferred = 6378824 (615548 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.3 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x615548 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018
+Linux version 4.15.0-rc9-next-20180126-229715-gf0701bf (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:19:27 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997464K/2096128K available (9216K kernel code, 782K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997464K/2096128K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,7 +86,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -446,7 +446,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3ad0dc5f, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x03cbc550, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -458,12 +458,12 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:55 UTC (946684915)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-+USB0_VBUS_SW: disabling
 cfg80211: failed to load regulatory.db
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.022873987 -0800
+++ /tmp/foob	2018-01-25 19:46:22.026874006 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 25 19:19:57 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993492K/2097148K available (11264K kernel code, 1564K rwdata, 4336K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993488K/2097148K available (11264K kernel code, 1568K rwdata, 4336K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1565 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1569 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -138,7 +138,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 514757
+Built 1 zonelists, mobility grouping on.  Total pages: 514756
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -310,7 +310,9 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 NET: Registered protocol family 10
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 Segment Routing with IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
@@ -320,33 +322,31 @@
 can: broadcast manager protocol (rev 20170425 t)
 can: netlink gateway (rev 20170425) max_hops=1
 Key type dns_resolver registered
+mmc0: new high speed MMC card at address 0001
 ThumbEE CPU extension supported.
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 Registering SWP/SWPB emulation handler
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 Loading compiled-in X.509 certificates
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +3.3V_RUN: supplied by +3.3V_SYS
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +5V_VDD_TS_SW: supplied by +5V_SYS
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +5V_USB_SS: supplied by +5V_SYS
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +3.3V_PANEL: supplied by +3.3V_RUN
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
+elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -357,19 +357,19 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
-mmc2: Invalid maximum block size, assuming 512 bytes
 elan_i2c 1-0015: invalid report id data (ff)
-mmc1: new high speed SDIO card at address 0001
+mmc2: Invalid maximum block size, assuming 512 bytes
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
 tegra-sor 54540000.sor: failed to probe output: -517
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 panel-simple panel: panel supply power not found, using dummy regulator
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
+mmc1: new high speed SDIO card at address 0001
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.042874079 -0800
+++ /tmp/foob	2018-01-25 19:46:22.046874098 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.2 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 6214528 (5ed380 hex)
+Bytes transferred = 6215440 (5ed710 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ed380 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ed710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:18:48 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999508K/2097148K available (9216K kernel code, 782K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999508K/2097148K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -385,15 +385,15 @@
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
+tegra-sor 54540000.sor: failed to probe output: -517
 GPT:Primary header thinks Alt. header is not at the end of the disk.
+panel-simple panel: panel supply power not found, using dummy regulator
 GPT:3014591 != 15564799
-tegra-sor 54540000.sor: failed to probe output: -517
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 GPT: Use GNU Parted to correct GPT errors.
-panel-simple panel: panel supply power not found, using dummy regulator
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 tegra-sor 54540000.sor: failed to probe output: -517
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.066874189 -0800
+++ /tmp/foob	2018-01-25 19:46:22.070874207 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 2.8 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6377936 (6151d0 hex)
+Bytes transferred = 6378824 (615548 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x615548 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018
+Linux version 4.15.0-rc9-next-20180126-229715-gf0701bf (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:19:27 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998484K/2097148K available (9216K kernel code, 782K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -390,8 +390,8 @@
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -407,20 +407,20 @@
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    2.890113] alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc77, fbc78) PFNs busy
+alloc_contig_range: [fbc78, fbc79) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc7a, fbc7b) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
 alloc_contig_range: [fbc7d, fbc7e) PFNs busy
 alloc_contig_range: [fbc7e, fbc7f) PFNs busy
 alloc_contig_range: [fbc7f, fbc80) PFNs busy
 alloc_contig_range: [fbca1, fbca2) PFNs busy
-alloc_contig_range: [fbca2, fbca3) PFNs busy
-alloc_contig_range: [fbca3, fbca4) PFNs busy
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.722134] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.082874262 -0800
+++ /tmp/foob	2018-01-25 19:46:22.086874281 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801871 us
+Bootloader-Cpu Init at (time stamp): 1801346 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801845  us
-Bootloader (AosInit) time: 734238 us
-Bootloader Main Init time: 180075 us
-BlockDevMgrInit time: 157536 us
-PartMgrInit time: 8 us
-StorMgrInit time: 31 us
+Miscellaneous avp time: 1801320  us
+Bootloader (AosInit) time: 733448 us
+Bootloader Main Init time: 180035 us
+BlockDevMgrInit time: 157523 us
+PartMgrInit time: 9 us
+StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76691 us 
-Display init time: 574805 us
-Kernel read time: 1561 msec
-Load Kernel Size:   20690944 Bytes
-Bl Kernel ReadSpeed: 13254000 Bytes/sec
-Pre-Kernel Jump time: 4372840 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9553898 us
+Partition Table load: 77048 us 
+Display init time: 574688 us
+Kernel read time: 1567 msec
+Load Kernel Size:   20760576 Bytes
+Bl Kernel ReadSpeed: 13248000 Bytes/sec
+Pre-Kernel Jump time: 4385516 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9570500 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 25 19:26:17 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -96,12 +96,12 @@
 Initmem setup node 0 [mem 0x0000000080000000-0x00000000ec5fffff]
 /cpus/cpu@1: missing enable-method property
 random: fast init done
-percpu: Embedded 24 pages/cpu @        (ptrval) s57600 r8192 d32512 u98304
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA32
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1705440K/1775616K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 53792K reserved, 16384K cma-reserved)
+Memory: 1705372K/1775616K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 53860K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -132,7 +132,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 430456
+Built 1 zonelists, mobility grouping on.  Total pages: 430439
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -140,9 +140,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000b84fe9d4, 1 data @ 00000000d51e5fc4)
+vdso: 2 pages (1 code @ 00000000bb2f71d4, 1 data @ 00000000210831fa)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -208,6 +208,7 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
 tegra-xusb-padctl 7009f000.padctl: deprecated DT, using legacy driver
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -262,10 +263,10 @@
 NET: Registered protocol family 17
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 9pnet: Installing 9P2000 support
-Key type dns_resolver registered
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-registered taskstats version 1
+Key type dns_resolver registered
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+registered taskstats version 1
 Loading compiled-in X.509 certificates
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.106874372 -0800
+++ /tmp/foob	2018-01-25 19:46:22.110874391 -0800
@@ -1,19 +1,31 @@
 
 
-Pass: Linux Boot Test 1
+FAILED: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.42 sec
-	Percent passed so far: 50.0
+	Execution Time 175.27 sec
+	Test TIMEOUT reached. Test did not report results in 120 secs
+	Percent passed so far: 0.0
 	
 
 
-Pass: Linux Boot Test 2
+FAILED: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 56.06 sec
-	Percent passed so far: 100.0
+	Execution Time 190.32 sec
+	Test TIMEOUT reached. Test did not report results in 120 secs
+	Percent passed so far: 0.0
 	
 
-Final Score: 100.0
+
+FAILED: Linux Boot Test 3
+	Test Owner(s): N/A
+	Execution Time 175.21 sec
+	Test TIMEOUT reached. Test did not report results in 120 secs
+	Percent passed so far: 0.0
+	
+
+Final Score: 0.0
+
+Sanity Failed! 
 I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
 I> rst_source : 0x0
 I> rst_level : 0x0
@@ -32,7 +44,7 @@
 I> Version of mb1 bct binary 12
 W> MB1 BCT does not have controller prod config data
 I> Bootrom patch version : 31 (correctly patched)
-I> ATE fuse revision : 0x40080
+I> ATE fuse revision : 0x500a0
 I> chip revision : A02P
 I> disabled_core_mask: 0xffffff0c
 I> Enabled Cores: 0xf3
@@ -98,7 +110,7 @@
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
 I> Updated LSR_DVCOMP_PARAMS: 0xc0760ec5c
-I> Updated LSR_DVCOMP_PARAMS: 0xc0760ec5c
+I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -131,7 +143,7 @@
 I> bit @ 0xd480000
 I> BR-BCT relocated to 0xf7f20000
 I> Boot-device: eMMC
-I> pmic: reset reason (nverc)	: 0x90
+I> pmic: reset reason (nverc)	: 0x10
 I> Reading GPT from 512 for device 00000003
 I> Reading GPT from 8388096 for device 00000003
 I> Found 14 partitions in 00000003 device
@@ -269,7 +281,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 28284156 bytes
+I> Total write size is 28316924 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -492,7 +504,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -515,30 +527,30 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.787] I> [OK]
+I> Checking boot.img header magic ... [0001.775] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.804] I> Done
-I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
+I> Move ramdisk (len: 6265163) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
+I> Ramdisk: Base: 0x98000000; Size: 0x5f994b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817138601
+I> add_serialno: Serial Num = 0321517104642
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321517104642 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:a7:a8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:a7:a9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:a7:aa
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -550,7 +562,29 @@
 I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> AddiŽ[0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/configs/3310-mem-type 00
+I> Adding plugin-manager/configs/3310-power-config 00
+I> Adding plugin-manager/configs/3310-misc-config 00
+I> Adding plugin-manager/configs/3310-modem-config 00
+I> Adding plugin-manager/configs/3310-touch-config 00
+I> Adding plugin-manager/configs/3310-display-config 00
+E> "chip-id" doesn't exist, creating 
+I> Adding plugin-manager/chip-id/A02P
+I> Updated memory info to DTB
+E> "reset" doesn't exist, creating 
+E> "pmc-reset-reason" doesn't exist, creating 
+E> "pmic-reset-reason" doesn't exist, creating 
+I> disabled_core_mask: 0xffffff0c
+I> tegrabl_load_kernel_and_dtb: Done
+
+
+U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:46:37 -0700)
+
+TEGRA186
+Model: NVIDIA P2771-0000-500
+DRAM:  7.8 GiB
+I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -729,7 +763,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -752,30 +786,30 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
+I> Checking boot.img header magic ... [0001.779] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6265163) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
+I> Ramdisk: Base: 0x98000000; Size: 0x5f994b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817138601
+I> add_serialno: Serial Num = 0321517104642
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321517104642 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:a7:a8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:a7:a9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:a7:aa
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -824,17 +858,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 65 ms (5.9 KiB/s)
+431 bytes read in 70 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265227 bytes read in 209 ms (28.6 MiB/s)
+6265163 bytes read in 201 ms (29.7 MiB/s)
 Retrieving file: /boot/Image
-17322496 bytes read in 461 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot,nolock,nfsvers=2 rootwait
+17394176 bytes read in 462 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 57 ms (402.3 KiB/s)
+23528 bytes read in 61 ms (376 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -956,9 +990,9 @@
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 mmc2: new high speed MMC card at address 0001
-max77686-rtc max77620-rtc: setting system clock to 2016-10-11 01:12:27 UTC (1476148347)
+max77686-rtc max77620-rtc: setting system clock to 2016-08-27 08:49:30 UTC (1472287770)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address c2:b0:d8:de:6e:50
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 0e:a2:7b:49:9b:2c
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
@@ -969,33 +1003,32 @@
 dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 WARNING: CPU: 4 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S               4.15.0-rc8-next-20180119-228575-g761914d #1
+CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S               4.15.0-rc9-next-20180126-229715-gf0701bf #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-Workqueue: events_power_efficient phy_state_machine
 IP-Config: Complete:
+Workqueue: events_power_efficient phy_state_machine
+     device=eth0, hwaddr=0e:a2:7b:49:9b:2c, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009f2bab0
-     device=eth0, hwaddr=c2:b0:d8:de:6e:50, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-x29: ffff000009f2bab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fefd28 
      host=192.168.99.2, domain=, nis-domain=(none)
-x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4e2c878 
+sp : ffff000009f3bab0
+x29: ffff000009f3bab0 x28: ffff8001f7808070 
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x22: 0000000000000080 
-x21: ffff000009f2bb58 x20: ffff000008fd9000 
-x19: ffff000009f2bbd8 x18: 0000000000000000 
-x17: 00000000efb9c8d6 x16: 000000007922798e 
-x15: 00000000f81250ae x14: 00000000000c8000 
+x27: ffff8001f7808020 x26: ffff000008fffda8 
+x25: 0000000000000000 x24: 0000000000000001 
+x23: ffff8001f5350878 x22: 0000000000000080 
+x21: ffff000009f3bb58 x20: ffff000008fe9000 
+x19: ffff000009f3bbd8 x18: 0000000000000000 
+x17: 000000000c73f896 x16: 0000000043638bd9 
+x15: 0000000085ab87b5 x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff97560 
-x7 : ffff00000c980000 x6 : ffff000009f2bb68 
+x11: ffffffffffffffff x10: 0000000000000005 
+x9 : 00000000ffffffff x8 : ffff8001fffc76e0 
+x7 : ffff00000bc70000 x6 : ffff000009f3bb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009f2bbc0 x2 : 0000000000000080 
-x1 : ffff000009f2bb68 x0 : ffff8001f658fa18 
+x3 : ffff000009f3bbc0 x2 : 0000000000000080 
+x1 : ffff000009f3bb68 x0 : ffff8001f658fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1012,31 +1045,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace a72ece9fe88d6d53 ]---
+---[ end trace ac24874689a54bc8 ]---
 WARNING: CPU: 4 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S      W        4.15.0-rc8-next-20180119-228575-g761914d #1
+CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S      W        4.15.0-rc9-next-20180126-229715-gf0701bf #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009f2ba40
-x29: ffff000009f2ba40 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fefd28 
+sp : ffff000009f3ba40
+x29: ffff000009f3ba40 x28: ffff8001f7808070 
+x27: ffff8001f7808020 x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009f2bae8 x20: ffff000008fd9000 
-x19: ffff000009f2bb68 x18: 0000000000000000 
-x17: 00000000efb9c8d6 x16: 000000007922798e 
-x15: 00000000f81250ae x14: 00000000000c8000 
+x21: ffff000009f3bae8 x20: ffff000008fe9000 
+x19: ffff000009f3bb68 x18: 0000000000000000 
+x17: 000000000c73f896 x16: 0000000043638bd9 
+x15: 0000000085ab87b5 x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff97560 
-x7 : ffff00000c980000 x6 : ffff000009f2baf8 
+x11: ffffffffffffffff x10: 0000000000000005 
+x9 : 00000000ffffffff x8 : ffff8001fffc76e0 
+x7 : ffff00000bc70000 x6 : ffff000009f3baf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009f2bb50 x2 : 0000000000000080 
-x1 : ffff000009f2baf8 x0 : ffff8001f658fa18 
+x3 : ffff000009f3bb50 x2 : 0000000000000080 
+x1 : ffff000009f3baf8 x0 : ffff8001f658fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1053,7 +1086,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace a72ece9fe88d6d54 ]---
+---[ end trace ac24874689a54bc9 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1064,126 +1097,13 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Tue Oct 11 01:12:32 UTC 2016
+L4T-INITRD Build DATE: Sat Aug 27 08:49:34 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
-IP Address: 192.168.99.2
-Rootfs mounted over nfs
-Switching from initrd to actual rootfs
-systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
-systemd[1]: Detected architecture arm64.
-
-Welcome to [1mUbuntu 16.04 LTS[0m!
-
-systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Listening on Journal Socket.
-Listening on Journal Socket.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-Started Dispatch Password Requests to Console Directory Watch.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
-systemd[1]: Listening on Journal Socket (/dev/log).
-Listening on Journal Socket (/dev/log).
-systemd[1]: Created slice System Slice.
-Created slice System Slice.
-systemd[1]: Starting Load Kernel Modules...
-         Starting Load Kernel Modules...
-         Mounting Debug File System...
-Reached target Swap.
-Created slice User and Session Slice.
-         Starting Journal Service...
-Created slice system-getty.slice.
-         Mounting Huge Pages File System...
-Started Forward Password Requests to Wall Directory Watch.
-Reached target Paths.
-         Starting Remount Root and Kernel File Systems...
-Reached target Encrypted Volumes.
-         Mounting RPC Pipe File System...
-Listening on udev Control Socket.
-Listening on /dev/initctl Compatibility Named Pipe.
-Listening on udev Kernel Socket.
-Reached target Slices.
-         Mounting POSIX Message Queue File System...
-Created slice system-serial\x2dgetty.slice.
-         Starting Create Static Device Nodes in /dev...
-Mounted POSIX Message Queue File System.
-Mounted Huge Pages File System.
-Mounted Debug File System.
-Mounted RPC Pipe File System.
-Started Journal Service.
-Started Load Kernel Modules.
-Started Remount Root and Kernel File Systems.
-         Starting udev Coldplug all Devices...
-         Starting Load/Save Random Seed...
-         Mounting Configuration File System...
-         Starting Apply Kernel Variables...
-         Starting Flush Journal to Persistent Storage...
-Mounted Configuration File System.
-Started Create Static Device Nodes in /dev.
-Started Load/Save Random Seed.
-Started Apply Kernel Variables.
-systemd-journald[1499]: Received request to flush runtime journal from PID 1
-Reached target Local File Systems (Pre).
-Reached target Local File Systems.
-         Starting Set console keymap...
-         Starting Raise network interfaces...
-         Starting Preprocess NFS configuration...
-         Starting udev Kernel Device Manager...
-Started Flush Journal to Persistent Storage.
-Failed to start Set console keymap.
-See 'systemctl status console-setup.service' for details.
-Started Preprocess NFS configuration.
-Reached target NFS client services.
-Reached target Remote File Systems (Pre).
-Reached target Remote File Systems.
-         Starting Create Volatile Files and Directories...
-Started udev Coldplug all Devices.
-Started udev Kernel Device Manager.
-Found device /dev/ttyS0.
-Started Create Volatile Files and Directories.
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
-         Starting Update UTMP about System Boot/Shutdown...
-Reached target System Time Synchronized.
-Started Update UTMP about System Boot/Shutdown.
-Reached target System Initialization.
-Listening on RPCbind Server Activation Socket.
-Started Daily apt activities.
-Listening on D-Bus System Message Bus Socket.
-Reached target Sockets.
-Reached target Basic System.
-Started D-Bus System Message Bus.
-         Starting Login Service...
-         Starting OpenBSD Secure Shell server...
-Started Regular background program processing daemon.
-         Starting /etc/rc.local Compatibility...
-         Starting Permit User Sessions...
-         Starting LSB: Start NTP daemon...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
-         Starting System Logging Service...
-Started Daily Cleanup of Temporary Directories.
-Reached target Timers.
-Started /etc/rc.local Compatibility.
-Started Permit User Sessions.
-Started Serial Getty on ttyS0.
-Started Getty on tty1.
-Reached target Login Prompts.
-Started Login Service.
-Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started System Logging Service.
-Started LSB: Start NTP daemon.
-Started OpenBSD Secure Shell server.
-Reached target Multi-User System.
-Reached target Graphical Interface.
-         Starting Update UTMP about System Runlevel Changes...
-Started Update UTMP about System Runlevel Changes.
-

-Ubuntu 16.04 LTS tegra-ubuntu ttyS0
-
-tegra-ubuntu login: [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+ERROR: dhclient fail...
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -1362,7 +1282,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -1385,30 +1305,30 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
+I> Checking boot.img header magic ... [0001.779] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6265163) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
+I> Ramdisk: Base: 0x98000000; Size: 0x5f994b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817138601
+I> add_serialno: Serial Num = 0321517104642
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321517104642 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:a7:a8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:a7:a9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:a7:aa
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -1457,17 +1377,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 65 ms (5.9 KiB/s)
+431 bytes read in 70 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265227 bytes read in 209 ms (28.6 MiB/s)
+6265163 bytes read in 201 ms (29.7 MiB/s)
 Retrieving file: /boot/Image
-17322496 bytes read in 461 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot,nolock,nfsvers=2 rootwait
+17394176 bytes read in 462 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 56 ms (410.2 KiB/s)
+23528 bytes read in 61 ms (376 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -1588,46 +1508,46 @@
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-10-11 01:13:29 UTC (1476148409)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address f6:cd:d5:f2:fd:a0
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmc2: new high speed MMC card at address 0001
-dwmac4: Master AXI performs any burst length
+max77686-rtc max77620-rtc: setting system clock to 2016-08-27 08:52:30 UTC (1472287950)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 12:d3:89:43:ed:d2
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
+dwmac4: Master AXI performs any burst length
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-WARNING: CPU: 4 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+WARNING: CPU: 0 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 51 Comm: kworker/u12:3 Tainted: G S               4.15.0-rc8-next-20180119-228575-g761914d #1
+CPU: 0 PID: 51 Comm: kworker/u12:3 Tainted: G S               4.15.0-rc9-next-20180126-229715-gf0701bf #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 IP-Config: Complete:
 Workqueue: events_power_efficient phy_state_machine
-     device=eth0, hwaddr=f6:cd:d5:f2:fd:a0, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=12:d3:89:43:ed:d2, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
      host=192.168.99.2, domain=, nis-domain=(none)
-sp : ffff000009fbbab0
-x29: ffff000009fbbab0 x28: 0000000000000000 
+sp : ffff000009fcbab0
+x29: ffff000009fcbab0 x28: 0000000000000000 
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x27: ffff000009f93ce8 x26: ffff000008fefd28 
+x27: ffff000009fa3ce8 x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f5d8c878 x22: 0000000000000080 
-x21: ffff000009fbbb58 x20: ffff000008fd9000 
-x19: ffff000009fbbbd8 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000cdf3d88 x10: 0000000000000a00 
-x9 : ffff000009fbbb40 x8 : ffff8001f6b39860 
-x7 : ffff00000beb0000 x6 : ffff000009fbbb68 
+x23: ffff8001f5f8c878 x22: 0000000000000080 
+x21: ffff000009fcbb58 x20: ffff000008fe9000 
+x19: ffff000009fcbbd8 x18: 0000000000000000 
+x17: 00000000cbae5873 x16: 0000000092b01c4a 
+x15: 000000009edf15ef x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000004 
+x9 : 00000000ffffffff x8 : ffff8001fffaf6e0 
+x7 : ffff00000c150000 x6 : ffff000009fcbb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009fbbbc0 x2 : 0000000000000080 
-x1 : ffff000009fbbb68 x0 : ffff8001f65abc18 
+x3 : ffff000009fcbbc0 x2 : 0000000000000080 
+x1 : ffff000009fcbb68 x0 : ffff8001f65eba18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1644,31 +1564,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 4450bb5af7e6af7f ]---
-WARNING: CPU: 4 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace 03a20c3dc043cf48 ]---
+WARNING: CPU: 0 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 51 Comm: kworker/u12:3 Tainted: G S      W        4.15.0-rc8-next-20180119-228575-g761914d #1
+CPU: 0 PID: 51 Comm: kworker/u12:3 Tainted: G S      W        4.15.0-rc9-next-20180126-229715-gf0701bf #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009fbba40
-x29: ffff000009fbba40 x28: 0000000000000000 
-x27: ffff000009f93ce8 x26: ffff000008fefd28 
+sp : ffff000009fcba40
+x29: ffff000009fcba40 x28: 0000000000000000 
+x27: ffff000009fa3ce8 x26: ffff000008fffda8 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009fbbae8 x20: ffff000008fd9000 
-x19: ffff000009fbbb68 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000068 
-x11: ffff00000cdf3d88 x10: 0000000000000a00 
-x9 : ffff000009fbbb40 x8 : ffff8001f6b39860 
-x7 : ffff00000beb0000 x6 : ffff000009fbbaf8 
+x21: ffff000009fcbae8 x20: ffff000008fe9000 
+x19: ffff000009fcbb68 x18: 0000000000000000 
+x17: 00000000cbae5873 x16: 0000000092b01c4a 
+x15: 000000009edf15ef x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000004 
+x9 : 00000000ffffffff x8 : ffff8001fffaf6e0 
+x7 : ffff00000c150000 x6 : ffff000009fcbaf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009fbbb50 x2 : 0000000000000080 
-x1 : ffff000009fbbaf8 x0 : ffff8001f65abc18 
+x3 : ffff000009fcbb50 x2 : 0000000000000080 
+x1 : ffff000009fcbaf8 x0 : ffff8001f65eba18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1685,7 +1605,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 4450bb5af7e6af80 ]---
+---[ end trace 03a20c3dc043cf49 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1696,123 +1616,772 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Tue Oct 11 01:13:33 UTC 2016
+L4T-INITRD Build DATE: Sat Aug 27 08:52:35 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
-IP Address: 192.168.99.2
-Rootfs mounted over nfs
-Switching from initrd to actual rootfs
-systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
-systemd[1]: Detected architecture arm64.
-
-Welcome to [1mUbuntu 16.04 LTS[0m!
-
-systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Listening on Journal Socket.
-Listening on Journal Socket.
-systemd[1]: Reached target Swap.
-Reached target Swap.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-systemd[1]: Created slice System Slice.
-Created slice System Slice.
-systemd[1]: Created slice system-serial\x2dgetty.slice.
-Created slice system-serial\x2dgetty.slice.
-systemd[1]: Created slice system-getty.slice.
-Created slice system-getty.slice.
-systemd[1]: Reached target Slices.
-Reached target Slices.
-         Mounting Huge Pages File System...
-         Mounting RPC Pipe File System...
-         Starting Create Static Device Nodes in /dev...
-Listening on Journal Socket (/dev/log).
-Started Dispatch Password Requests to Console Directory Watch.
-Listening on udev Kernel Socket.
-         Mounting POSIX Message Queue File System...
-         Mounting Debug File System...
-Listening on udev Control Socket.
-         Starting Remount Root and Kernel File Systems...
-Listening on /dev/initctl Compatibility Named Pipe.
-Listening on Journal Audit Socket.
-Listening on Syslog Socket.
-         Starting Journal Service...
-Started Forward Password Requests to Wall Directory Watch.
-Reached target Paths.
-         Starting Load Kernel Modules...
-Reached target Encrypted Volumes.
-Mounted POSIX Message Queue File System.
-Mounted Huge Pages File System.
-Mounted Debug File System.
-Mounted RPC Pipe File System.
-Started Journal Service.
-Started Create Static Device Nodes in /dev.
-Started Remount Root and Kernel File Systems.
-Started Load Kernel Modules.
-         Starting Apply Kernel Variables...
-         Mounting Configuration File System...
-         Starting udev Coldplug all Devices...
-         Starting Load/Save Random Seed...
-         Starting udev Kernel Device Manager...
-Reached target Local File Systems (Pre).
-Reached target Local File Systems.
-         Starting Set console keymap...
-         Starting Preprocess NFS configuration...
-         Starting Flush Journal to Persistent Storage...
-Mounted Configuration File System.
-Started Apply Kernel Variables.
-Started Load/Save Random Seed.
-Failed to start Set console keymap.
-See 'systemctl status console-setup.service' for details.
-Started Preprocess NFS configuration.
-Started udev Kernel Device Manager.
-systemd-journald[1508]: Received request to flush runtime journal from PID 1
-Reached target NFS client services.
-Reached target Remote File Systems (Pre).
-Reached target Remote File Systems.
-         Starting Raise network interfaces...
-Started Flush Journal to Persistent Storage.
-Started udev Coldplug all Devices.
-Found device /dev/ttyS0.
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
-         Starting Create Volatile Files and Directories...
-Started Create Volatile Files and Directories.
-Reached target System Time Synchronized.
-         Starting Update UTMP about System Boot/Shutdown...
-Started Update UTMP about System Boot/Shutdown.
-Reached target System Initialization.
-Listening on D-Bus System Message Bus Socket.
-Started Daily Cleanup of Temporary Directories.
-Listening on RPCbind Server Activation Socket.
-Reached target Sockets.
-Started Daily apt activities.
-Reached target Timers.
-Reached target Basic System.
-Started Regular background program processing daemon.
-         Starting OpenBSD Secure Shell server...
-Started D-Bus System Message Bus.
-         Starting Login Service...
-         Starting System Logging Service...
-         Starting Permit User Sessions...
-         Starting /etc/rc.local Compatibility...
-         Starting LSB: Start NTP daemon...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
-Started Permit User Sessions.
-Started /etc/rc.local Compatibility.
-Started System Logging Service.
-Started Getty on tty1.
-Started Serial Getty on ttyS0.
-Reached target Login Prompts.
-Started OpenBSD Secure Shell server.
-Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started Login Service.
-Started LSB: Start NTP daemon.
-Reached target Multi-User System.
-Reached target Graphical Interface.
-         Starting Update UTMP about System Runlevel Changes...
-Started Update UTMP about System Runlevel Changes.
-

-Ubuntu 16.04 LTS tegra-ubuntu ttyS0
+ERROR: dhclient fail...
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> Default Heap @ [0xd486400 - 0xd488400]
+I> DMA Heap @ [0x84900000 - 0x85300000]
+I> bit @ 0xd480000
+I> BR-BCT relocated to 0xf7f20000
+I> Boot-device: eMMC
+I> pmic: reset reason (nverc)	: 0x10
+I> Reading GPT from 512 for device 00000003
+I> Reading GPT from 8388096 for device 00000003
+I> Found 6 partitions in 00000003 device
+I> Reading GPT from 512 for device 00010003
+I> Found 17 partitions in 00010003 device
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (16) slot 0
+I> Select partition: bpmp-fw
+I> Loading partition bpmp-fw at 0xf7600000
+I> Reading two headers - addr:0xf7600000 blocks:1
+I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
+I> Binary(16) of size 524480 is loaded @ 0xf7600000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (17) slot 0
+I> Select partition: bpmp-fw-dtb
+I> Loading partition bpmp-fw-dtb at 0xf77f0000
+I> Reading two headers - addr:0xf77f0000 blocks:1
+I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
+I> Binary(17) of size 326672 is loaded @ 0xf77b0200
+I> BPMP-FW load address = 0xf7600000
+I> BPMP-FW DTB load address = 0x501b0200
+I> Loading SCE-FW ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (12) slot 0
+I> Select partition: sce-fw
+I> Loading partition sce-fw at 0xf7800000
+I> Reading two headers - addr:0xf7800000 blocks:1
+I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
+I> Binary(12) of size 65088 is loaded @ 0xf7800000
+I> Init SCE
+I> Copy BTCM section
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (13) slot 0
+I> Select partition: cpu-bootloader
+I> Loading partition cpu-bootloader at 0x96000000
+I> Reading two headers - addr:0x96000000 blocks:1
+I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
+I> Binary(13) of size 195776 is loaded @ 0x96000000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (20) slot 0
+I> Select partition: bootloader-dtb
+I> Loading partition bootloader-dtb at 0x85300000
+I> Reading two headers - addr:0x85300000 blocks:1
+I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
+I> Binary(20) of size 248128 is loaded @ 0x85300000
+I> MB2-params @ 0xf7f00000
+I> CPUBL-params @ 0xf7f00000
+I> CPU-BL loaded at : 0x96000000
+I> Loading TOS ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (14) slot 0
+I> Select partition: secure-os
+I> Loading partition secure-os at 0x8490f400
+I> Reading two headers - addr:0x8490f400 blocks:1
+I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
+I> Binary(14) of size 54384 is loaded @ 0x8490f400
+I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
+I> Erasing Monitor @ 0x8490f600
+I> Unhalting SCE
+I> Waypoint2-ACK: 0x5200b8d0
+I> MB2(TBoot-BPMP) done
 
-tegra-ubuntu login: 
\ No newline at end of file
+NOTICE:  BL31: v1.2(release):ff7a644
+NOTICE:  BL31: Built : 21:06:35, Mar  1 2017
+NOTICE:  Trusty image missing.
+ERROR:   Error initializing runtime service trusty_fast
+I> Welcome to Cboot
+I> Cboot Version: 00.00.2014.50-t186-fabbc56c
+I> CPU-BL Params @ 0xf7f00000
+I>  0) Base:0x00000000 Size:0x00000000
+I>  1) Base:0xf7e00000 Size:0x00100000
+I>  2) Base:0xf7d00000 Size:0x00100000
+I>  3) Base:0xf7c00000 Size:0x00100000
+I>  4) Base:0xf7b00000 Size:0x00100000
+I>  5) Base:0xf7a00000 Size:0x00100000
+I>  6) Base:0xf7600000 Size:0x00200000
+I>  7) Base:0xf7000000 Size:0x00400000
+I>  8) Base:0xf7900000 Size:0x00100000
+I>  9) Base:0xf7800000 Size:0x00100000
+I> 10) Base:0xf6800000 Size:0x00800000
+I> 11) Base:0x30000000 Size:0x00040000
+I> 12) Base:0xf7500000 Size:0x00100000
+I> 13) Base:0x30040000 Size:0x00001000
+I> 14) Base:0x30048000 Size:0x00001000
+I> 15) Base:0x30049000 Size:0x00001000
+I> 16) Base:0x3004a000 Size:0x00001000
+I> 17) Base:0x3004b000 Size:0x00001000
+I> 18) Base:0x3004c000 Size:0x00001000
+I> 19) Base:0x3004d000 Size:0x00001000
+I> 20) Base:0x3004e000 Size:0x00001000
+I> 21) Base:0x3004f000 Size:0x00001000
+I> 22) Base:0x00000000 Size:0x00000000
+I> 23) Base:0xf7ff0000 Size:0x00010000
+I> 24) Base:0x00000000 Size:0x00000000
+I> 25) Base:0x00000000 Size:0x00000000
+I> 26) Base:0x00000000 Size:0x00000000
+I> 27) Base:0x00000000 Size:0x00000000
+I> 28) Base:0x84400000 Size:0x00400000
+I> 29) Base:0x30000000 Size:0x00010000
+I> 30) Base:0xf8000000 Size:0x08000000
+I> 31) Base:0x00000000 Size:0x00000000
+I> 32) Base:0xf6000000 Size:0x00600000
+I> 33) Base:0x80000000 Size:0x76000000
+I> 34) Base:0x100000000 Size:0x180000000
+I> 35) Base:0x00000000 Size:0x00000000
+I> 36) Base:0x00000000 Size:0x00000000
+I> 37) Base:0xf7fc0000 Size:0x00020000
+I> 38) Base:0x84000000 Size:0x00400000
+I> 39) Base:0x96000000 Size:0x02000000
+I> 40) Base:0x84800000 Size:0x00b00000
+I> 41) Base:0xf7f00000 Size:0x00080000
+I> 42) Base:0x00000000 Size:0x00000000
+I> 43) Base:0x00000000 Size:0x00000000
+platform_init_interrupts-121, 1*

+Interrupts Init done

+calling constructors

+initializing heap
+initializing threads

+initializing timers

+creating bootstrap completion thread

+top of bootstrap2()

+CPU: ARM Cortex A57

+CPU: MIDR: 0x411FD073, MPIDR: 0x80000100

+initializing platform

+I> Boot-device: eMMC
+I> odm data is 1090000
+I> Reading GPT from 512 for device 00000003
+I> Reading GPT from 8388096 for device 00000003
+I> Found 6 partitions in 00000003 device
+I> Reading GPT from 512 for device 00010003
+I> Found 17 partitions in 00010003 device
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (1) slot 0
+I> Select partition: kernel-dtb
+I> Loading partition kernel-dtb at 0x92000000
+I> Kernel_dtb @0x92000000
+I> Bl_dtb @0x85300000
+I> gpio framework initialized
+I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
+I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
+I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
+I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
+I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
+I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
+E> tegrabl_blob_init: BMP partition does not have valid Blob
+E> tegrabl_load_bmp_blob: BMP blob initialization failed
+W> Loading bmp blob to memory failed
+I> Find /i2c@c250000's alias i2c7
+I> Reading eeprom i2c=7 address=0x50
+I> Device at /i2c@c250000:0x50
+I> Reading eeprom i2c=7 address=0x57
+I> Device at /i2c@c250000:0x57
+I> Find /i2c@c240000's alias i2c1
+I> Reading eeprom i2c=1 address=0x51
+I> Eeprom read failed 0x1a800027
+I> Find /i2c@3160000's alias i2c0
+I> Reading eeprom i2c=0 address=0x50
+I> Eeprom read failed 0x1a800027
+I> Find /i2c@3180000's alias i2c2
+I> Reading eeprom i2c=2 address=0x54
+I> Enabling gpio chip_id = 2, gpio pin = 9
+I> Disabling gpio chip_id = 2, gpio pin = 9
+I> Device at /i2c@3180000:0x54
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
+initializing target

+calling apps_init()

+starting app android_boot_app

+I> Gpio keyboard init success
+I> Kernel type = Normal
+I> Loading kernel/boot.img ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (0) slot 0
+I> Select partition: kernel
+I> Loading partition kernel at 0xa8000000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (1) slot 0
+I> Select partition: kernel-dtb
+I> Loading partition kernel-dtb at 0x92000000
+I> Kernel DTB @ 0x92000000
+I> Verified boot state = Orange
+E> tegrabl_display_clear: display is not initialized
+I> Checking boot.img header magic ... [0001.779] I> [OK]
+I> Valid boot.img @ 0xa8000000
+I> decompressor handler not found
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6265163) from 0xa8072800 to 0x98000000
+I> Updated bpmp info to DTB
+I> Ramdisk: Base: 0x98000000; Size: 0x5f994b
+I> Updated initrd info to DTB
+I> disabled_core_mask: 0xffffff0c
+I> Kernel type = Normal
+I> add_serialno: Serial Num = 0321517104642
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321517104642 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Updated bootarg info to DTB
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:a7:a8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:a7:a9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:a7:aa
+E> "ids" doesn't exist, creating 
+E> "connection" doesn't exist, creating 
+E> "configs" doesn't exist, creating 
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
+I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
+E> "i2c@c250000" doesn't exist, creating 
+E> "module@0x50" doesn't exist, creating 
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
+E> "module@0x57" doesn't exist, creating 
+I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
+E> "i2c@3180000" doesn't exist, creating 
+E> "module@0x54" doesn't exist, creating 
+I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/configs/3310-mem-type 00
+I> Adding plugin-manager/configs/3310-power-config 00
+I> Adding plugin-manager/configs/3310-misc-config 00
+I> Adding plugin-manager/configs/3310-modem-config 00
+I> Adding plugin-manager/configs/3310-touch-config 00
+I> Adding plugin-manager/configs/3310-display-config 00
+E> "chip-id" doesn't exist, creating 
+I> Adding plugin-manager/chip-id/A02P
+I> Updated memory info to DTB
+E> "reset" doesn't exist, creating 
+E> "pmc-reset-reason" doesn't exist, creating 
+E> "pmic-reset-reason" doesn't exist, creating 
+I> disabled_core_mask: 0xffffff0c
+I> tegrabl_load_kernel_and_dtb: Done
+
+
+U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:46:37 -0700)
+
+TEGRA186
+Model: NVIDIA P2771-0000-500
+DRAM:  7.8 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   eth0: ethernet@2490000
+Hit any key to stop autoboot:  2  1  0 
+MMC: no card present
+mmc_init: -123, time 1
+switch to partitions #0, OK
+mmc0(part 0) is current device
+Scanning mmc 0:1...
+Found /boot/extlinux/extlinux.conf
+Retrieving file: /boot/extlinux/extlinux.conf
+431 bytes read in 70 ms (5.9 KiB/s)
+p2771-0000 NFS boot options
+1:	primary kernel
+Enter choice: 1:	primary kernel
+Retrieving file: /boot/initrd
+6265163 bytes read in 201 ms (29.7 MiB/s)
+Retrieving file: /boot/Image
+17394176 bytes read in 462 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot,nolock,nfsvers=2 rootwait
+Retrieving file: /boot/tegra186-p2771-0000.dtb
+23528 bytes read in 61 ms (376 KiB/s)
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 0000000082000000, end 0000000082008be7
+
+Starting kernel ...
+
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [uart0] disabled
+bootconsole [uart0] disabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+arm-smmu 12000000.iommu: probing hardware configuration...
+arm-smmu 12000000.iommu: SMMUv2 with:
+arm-smmu 12000000.iommu: 	stage 1 translation
+arm-smmu 12000000.iommu: 	stage 2 translation
+arm-smmu 12000000.iommu: 	nested translation
+arm-smmu 12000000.iommu: 	stream matching with 128 register groups
+arm-smmu 12000000.iommu: 	64 context banks (0 stage-2 only)
+arm-smmu 12000000.iommu: 	Supported page sizes: 0x61311000
+arm-smmu 12000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
+arm-smmu 12000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+dwc-eth-dwmac 2490000.ethernet: Cannot get CSR clock
+dwc-eth-dwmac 2490000.ethernet: no reset control found
+stmmac - user ID: 0x10, Synopsys ID: 0x41
+dwc-eth-dwmac 2490000.ethernet: DMA HW capability register supported
+dwc-eth-dwmac 2490000.ethernet: RX Checksum Offload Engine supported
+dwc-eth-dwmac 2490000.ethernet: TX Checksum insertion supported
+dwc-eth-dwmac 2490000.ethernet: Wake-Up On Lan supported
+dwc-eth-dwmac 2490000.ethernet: TSO supported
+dwc-eth-dwmac 2490000.ethernet: TSO feature enabled
+dwc-eth-dwmac 2490000.ethernet: Enable RX Mitigation via HW Watchdog Timer
+libphy: stmmac: probed
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+i2c /dev entries driver
+max77620 0-003c: PMIC Version OTP:0x45 and ES:0x8
+max77620-sd0: supplied by regulator-dummy
+VDD_DDR_1V1_PMIC: Bringing 1125000uV into 1100000-1100000uV
+max77620-sd1: supplied by regulator-dummy
+max77620-sd2: supplied by regulator-dummy
+max77620-sd3: supplied by regulator-dummy
+max77620-ldo0: supplied by regulator-dummy
+max77620-ldo1: supplied by regulator-dummy
+max77620-ldo2: supplied by regulator-dummy
+max77620-ldo3: supplied by regulator-dummy
+max77620-ldo4: supplied by regulator-dummy
+VDD_RTC: Bringing 800000uV into 1000000-1000000uV
+max77620-ldo5: supplied by regulator-dummy
+VDDIO_SDMMC3_AP: Bringing 1800000uV into 2800000-2800000uV
+max77620-ldo6: supplied by regulator-dummy
+max77620-ldo7: supplied by regulator-dummy
+VDD_HDMI_1V05: Bringing 1000000uV into 1050000-1050000uV
+max77620-ldo8: supplied by regulator-dummy
+VDD_PEX_1V05: Bringing 1000000uV into 1050000-1050000uV
+max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 3400000.sdhci: Got CD GPIO
+sdhci-tegra 3400000.sdhci: Got WP GPIO
+mmc0: Unknown controller version (4). You may experience problems.
+mmc0: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+VDD_1V8_AP: supplied by VDD_1V8
+SD_CARD_SW_PWR: supplied by VDD_3V3_SYS
+pca953x 1-0074: 1-0074 supply vcc not found, using dummy regulator
+pca953x 1-0077: 1-0077 supply vcc not found, using dummy regulator
+tegra-pcie 10003000.pcie: 4x1, 1x1 configuration
+tegra-pcie 10003000.pcie: probing port 0, using 4 lanes
+tegra-pcie 10003000.pcie: Slot present pin change, signature: 00000018
+tegra-pcie 10003000.pcie: link 0 down, retrying
+tegra-pcie 10003000.pcie: link 0 down, retrying
+tegra-pcie 10003000.pcie: link 0 down, retrying
+tegra-pcie 10003000.pcie: link 0 down, ignoring
+tegra-pcie 10003000.pcie: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff]
+pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+sdhci-tegra 3400000.sdhci: Got CD GPIO
+sdhci-tegra 3400000.sdhci: Got WP GPIO
+mmc1: Unknown controller version (4). You may experience problems.
+mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA
+mmc2: Unknown controller version (4). You may experience problems.
+mmc2: Switching to 3.3V signalling voltage failed
+mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
+VDD_HDMI_5V0: supplied by VDD_5V0_SYS
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+mmc2: new high speed MMC card at address 0001
+max77686-rtc max77620-rtc: setting system clock to 2016-08-27 08:55:44 UTC (1472288144)
+mmcblk2: mmc2:0001 032G34 29.1 GiB 
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 2a:8f:c7:a2:af:2b
+mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
+mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
+dwmac4: Master AXI performs any burst length
+mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+Modules linked in:
+CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S               4.15.0-rc9-next-20180126-229715-gf0701bf #1
+Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
+IP-Config: Complete:
+Workqueue: events_power_efficient phy_state_machine
+     device=eth0, hwaddr=2a:8f:c7:a2:af:2b, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+pstate: 80000085 (Nzcv daIf -PAN -UAO)
+pc : tegra_bpmp_transfer+0x2dc/0x368
+lr : tegra_bpmp_clk_transfer+0x94/0xd0
+     host=192.168.99.2, domain=, nis-domain=(none)
+sp : ffff000009fa3ab0
+x29: ffff000009fa3ab0 x28: ffff8001f7808070 
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+x27: ffff8001f7808020 x26: ffff000008fffda8 
+x25: 0000000000000000 x24: 0000000000000001 
+x23: ffff8001f4eac878 x22: 0000000000000080 
+x21: ffff000009fa3b58 x20: ffff000008fe9000 
+x19: ffff000009fa3bd8 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000c350000 x6 : ffff000009fa3b68 
+x5 : ffffffffffffffd0 x4 : 0000000000000010 
+x3 : ffff000009fa3bc0 x2 : 0000000000000080 
+x1 : ffff000009fa3b68 x0 : ffff8001f6595a18 
+Call trace:
+ tegra_bpmp_transfer+0x2dc/0x368
+ tegra_bpmp_clk_transfer+0x94/0xd0
+ tegra_bpmp_clk_round_rate+0x70/0xa4
+ clk_core_determine_round_nolock+0x58/0xa0
+ clk_core_round_rate_nolock+0x34/0x90
+ clk_core_set_rate_nolock+0x5c/0x1c0
+ clk_set_rate+0x30/0x8c
+ tegra_eqos_fix_speed+0x1ac/0x250
+ stmmac_adjust_link+0x1fc/0x230
+ phy_link_change+0x54/0x60
+ phy_state_machine+0x300/0x430
+ process_one_work+0x124/0x290
+ worker_thread+0x13c/0x3f8
+ kthread+0xfc/0x128
+ ret_from_fork+0x10/0x18
+---[ end trace 1d940a164f6a5365 ]---
+WARNING: CPU: 5 PID: 46 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+Modules linked in:
+CPU: 5 PID: 46 Comm: kworker/u12:2 Tainted: G S      W        4.15.0-rc9-next-20180126-229715-gf0701bf #1
+Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
+Workqueue: events_power_efficient phy_state_machine
+pstate: 80000085 (Nzcv daIf -PAN -UAO)
+pc : tegra_bpmp_transfer+0x2dc/0x368
+lr : tegra_bpmp_clk_transfer+0x94/0xd0
+sp : ffff000009fa3a40
+x29: ffff000009fa3a40 x28: ffff8001f7808070 
+x27: ffff8001f7808020 x26: ffff000008fffda8 
+x25: 0000000000000000 x24: 0000000000000001 
+x23: 00000000ffffffff x22: 0000000000000080 
+x21: ffff000009fa3ae8 x20: ffff000008fe9000 
+x19: ffff000009fa3b68 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 00000000000079df x12: 00000000000079df 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff976e0 
+x7 : ffff00000c350000 x6 : ffff000009fa3af8 
+x5 : ffffffffffffffd0 x4 : 0000000000000010 
+x3 : ffff000009fa3b50 x2 : 0000000000000080 
+x1 : ffff000009fa3af8 x0 : ffff8001f6595a18 
+Call trace:
+ tegra_bpmp_transfer+0x2dc/0x368
+ tegra_bpmp_clk_transfer+0x94/0xd0
+ tegra_bpmp_clk_round_rate+0x70/0xa4
+ clk_core_determine_round_nolock+0x58/0xa0
+ clk_calc_new_rates+0x88/0x1d8
+ clk_core_set_rate_nolock+0xac/0x1c0
+ clk_set_rate+0x30/0x8c
+ tegra_eqos_fix_speed+0x1ac/0x250
+ stmmac_adjust_link+0x1fc/0x230
+ phy_link_change+0x54/0x60
+ phy_state_machine+0x300/0x430
+ process_one_work+0x124/0x290
+ worker_thread+0x13c/0x3f8
+ kthread+0xfc/0x128
+ ret_from_fork+0x10/0x18
+---[ end trace 1d940a164f6a5366 ]---
+dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
+dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
+VDD_RTC: disabling
+VDDIO_SDMMC3_AP: disabling
+SD_CARD_SW_PWR: disabling
+VDD_HDMI_5V0: disabling
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 1152K
+/init: line 58: chmod: command not found
+L4T-INITRD Build DATE: Sat Aug 27 08:55:48 UTC 2016
+Root device found: nfs
+Ethernet interfaces: eth0
+ERROR: dhclient fail...
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> Default Heap @ [0xd486400 - 0xd488400]
+I> DMA Heap @ [0x84900000 - 0x85300000]
+I> bit @ 0xd480000
+I> BR-BCT relocated to 0xf7f20000
+I> Boot-device: eMMC
+I> pmic: reset reason (nverc)	: 0x10
+I> Reading GPT from 512 for device 00000003
+I> Reading GPT from 8388096 for device 00000003
+I> Found 6 partitions in 00000003 device
+I> Reading GPT from 512 for device 00010003
+I> Found 17 partitions in 00010003 device
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (16) slot 0
+I> Select partition: bpmp-fw
+I> Loading partition bpmp-fw at 0xf7600000
+I> Reading two headers - addr:0xf7600000 blocks:1
+I> Addr: 0xf7600000, start-block: 58739717, num_blocks: 1
+I> Binary(16) of size 524480 is loaded @ 0xf7600000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (17) slot 0
+I> Select partition: bpmp-fw-dtb
+I> Loading partition bpmp-fw-dtb at 0xf77f0000
+I> Reading two headers - addr:0xf77f0000 blocks:1
+I> Addr: 0xf77f0000, start-block: 58740925, num_blocks: 1
+I> Binary(17) of size 326672 is loaded @ 0xf77b0200
+I> BPMP-FW load address = 0xf7600000
+I> BPMP-FW DTB load address = 0x501b0200
+I> Loading SCE-FW ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (12) slot 0
+I> Select partition: sce-fw
+I> Loading partition sce-fw at 0xf7800000
+I> Reading two headers - addr:0xf7800000 blocks:1
+I> Addr: 0xf7800000, start-block: 58741925, num_blocks: 1
+I> Binary(12) of size 65088 is loaded @ 0xf7800000
+I> Init SCE
+I> Copy BTCM section
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (13) slot 0
+I> Select partition: cpu-bootloader
+I> Loading partition cpu-bootloader at 0x96000000
+I> Reading two headers - addr:0x96000000 blocks:1
+I> Addr: 0x96000000, start-block: 58732545, num_blocks: 1
+I> Binary(13) of size 195776 is loaded @ 0x96000000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (20) slot 0
+I> Select partition: bootloader-dtb
+I> Loading partition bootloader-dtb at 0x85300000
+I> Reading two headers - addr:0x85300000 blocks:1
+I> Addr: 0x85300000, start-block: 58733057, num_blocks: 1
+I> Binary(20) of size 248128 is loaded @ 0x85300000
+I> MB2-params @ 0xf7f00000
+I> CPUBL-params @ 0xf7f00000
+I> CPU-BL loaded at : 0x96000000
+I> Loading TOS ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (14) slot 0
+I> Select partition: secure-os
+I> Loading partition secure-os at 0x8490f400
+I> Reading two headers - addr:0x8490f400 blocks:1
+I> Addr: 0x8490f400, start-block: 58733569, num_blocks: 1
+I> Binary(14) of size 54384 is loaded @ 0x8490f400
+I> Copying Monitor (length: 0xd270) from 0x8490f600 to 0x40000000
+I> Erasing Monitor @ 0x8490f600
+I> Unhalting SCE
+I> Waypoint2-ACK: 0x5200b8d0
+I> MB2(TBoot-BPMP) done
+
+NOTICE:  BL31: v1.2(release):ff7a644
+NOTICE:  BL31: Built : 21:06:35, Mar  1 2017
+NOTICE:  Trusty image missing.
+ERROR:   Error initializing runtime service trusty_fast
+I> Welcome to Cboot
+I> Cboot Version: 00.00.2014.50-t186-fabbc56c
+I> CPU-BL Params @ 0xf7f00000
+I>  0) Base:0x00000000 Size:0x00000000
+I>  1) Base:0xf7e00000 Size:0x00100000
+I>  2) Base:0xf7d00000 Size:0x00100000
+I>  3) Base:0xf7c00000 Size:0x00100000
+I>  4) Base:0xf7b00000 Size:0x00100000
+I>  5) Base:0xf7a00000 Size:0x00100000
+I>  6) Base:0xf7600000 Size:0x00200000
+I>  7) Base:0xf7000000 Size:0x00400000
+I>  8) Base:0xf7900000 Size:0x00100000
+I>  9) Base:0xf7800000 Size:0x00100000
+I> 10) Base:0xf6800000 Size:0x00800000
+I> 11) Base:0x30000000 Size:0x00040000
+I> 12) Base:0xf7500000 Size:0x00100000
+I> 13) Base:0x30040000 Size:0x00001000
+I> 14) Base:0x30048000 Size:0x00001000
+I> 15) Base:0x30049000 Size:0x00001000
+I> 16) Base:0x3004a000 Size:0x00001000
+I> 17) Base:0x3004b000 Size:0x00001000
+I> 18) Base:0x3004c000 Size:0x00001000
+I> 19) Base:0x3004d000 Size:0x00001000
+I> 20) Base:0x3004e000 Size:0x00001000
+I> 21) Base:0x3004f000 Size:0x00001000
+I> 22) Base:0x00000000 Size:0x00000000
+I> 23) Base:0xf7ff0000 Size:0x00010000
+I> 24) Base:0x00000000 Size:0x00000000
+I> 25) Base:0x00000000 Size:0x00000000
+I> 26) Base:0x00000000 Size:0x00000000
+I> 27) Base:0x00000000 Size:0x00000000
+I> 28) Base:0x84400000 Size:0x00400000
+I> 29) Base:0x30000000 Size:0x00010000
+I> 30) Base:0xf8000000 Size:0x08000000
+I> 31) Base:0x00000000 Size:0x00000000
+I> 32) Base:0xf6000000 Size:0x00600000
+I> 33) Base:0x80000000 Size:0x76000000
+I> 34) Base:0x100000000 Size:0x180000000
+I> 35) Base:0x00000000 Size:0x00000000
+I> 36) Base:0x00000000 Size:0x00000000
+I> 37) Base:0xf7fc0000 Size:0x00020000
+I> 38) Base:0x84000000 Size:0x00400000
+I> 39) Base:0x96000000 Size:0x02000000
+I> 40) Base:0x84800000 Size:0x00b00000
+I> 41) Base:0xf7f00000 Size:0x00080000
+I> 42) Base:0x00000000 Size:0x00000000
+I> 43) Base:0x00000000 Size:0x00000000
+platform_init_interrupts-121, 1*

+Interrupts Init done

+calling constructors

+initializing heap
+initializing threads

+initializing timers

+creating bootstrap completion thread

+top of bootstrap2()

+CPU: ARM Cortex A57

+CPU: MIDR: 0x411FD073, MPIDR: 0x80000100

+initializing platform

+I> Boot-device: eMMC
+I> odm data is 1090000
+I> Reading GPT from 512 for device 00000003
+I> Reading GPT from 8388096 for device 00000003
+I> Found 6 partitions in 00000003 device
+I> Reading GPT from 512 for device 00010003
+I> Found 17 partitions in 00010003 device
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (1) slot 0
+I> Select partition: kernel-dtb
+I> Loading partition kernel-dtb at 0x92000000
+I> Kernel_dtb @0x92000000
+I> Bl_dtb @0x85300000
+I> gpio framework initialized
+I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
+I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
+I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
+I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
+I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
+I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver
+E> tegrabl_blob_init: BMP partition does not have valid Blob
+E> tegrabl_load_bmp_blob: BMP blob initialization failed
+W> Loading bmp blob to memory failed
+I> Find /i2c@c250000's alias i2c7
+I> Reading eeprom i2c=7 address=0x50
+I> Device at /i2c@c250000:0x50
+I> Reading eeprom i2c=7 address=0x57
+I> Device at /i2c@c250000:0x57
+I> Find /i2c@c240000's alias i2c1
+I> Reading eeprom i2c=1 address=0x51
+I> Eeprom read failed 0x1a800027
+I> Find /i2c@3160000's alias i2c0
+I> Reading eeprom i2c=0 address=0x50
+I> Eeprom read failed 0x1a800027
+I> Find /i2c@3180000's alias i2c2
+I> Reading eeprom i2c=2 address=0x54
+I> Enabling gpio chip_id = 2, gpio pin = 9
+I> Disabling gpio chip_id = 2, gpio pin = 9
+I> Device at /i2c@3180000:0x54
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
+initializing target

+calling apps_init()

+starting app android_boot_app

+I> Gpio keyboard init success
+I> Kernel type = Normal
+I> Loading kernel/boot.img ...
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (0) slot 0
+I> Select partition: kernel
+I> Loading partition kernel at 0xa8000000
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> A/B: bin_type (1) slot 0
+I> Select partition: kernel-dtb
+I> Loading partition kernel-dtb at 0x92000000
+I> Kernel DTB @ 0x92000000
+I> Verified boot state = Orange
+E> tegrabl_display_clear: display is not initialized
+I> Checking boot.img header magic ... [0001.779] I> [OK]
+I> Valid boot.img @ 0xa8000000
+I> decompressor handler not found
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6265163) from 0xa8072800 to 0x98000000
+I> Updated bpmp info to DTB
+I> Ramdisk: Base: 0x98000000; Size: 0x5f994b
+I> Updated initrd info to DTB
+I> disabled_core_mask: 0xffffff0c
+I> Kernel type = Normal
+I> add_serialno: Serial Num = 0321517104642
+W> No valid slot number is found in scratch register
+W> Return default slot: _a
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2510/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321517104642 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Updated bootarg info to DTB
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:a7:a8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:a7:a9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:a7:aa
+E> "ids" doesn't exist, creating 
+E> "connection" doesn't exist, creating 
+E> "configs" doesn't exist, creating 
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
+I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
+I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
+E> "i2c@c250000" doesn't exist, creating 
+E> "module@0x50" doesn't exist, creating 
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
+E> "module@0x57" doesn't exist, creating 
+I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
+E> "i2c@3180000" doesn't exist, creating 
+E> "module@0x54" doesn't exist, creating 
+I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/configs/3310-mem-type 00
+I> Adding plugin-manager/configs/3310-power-config 00
+I> Adding plugin-manager/configs/3310-misc-config 00
+I> Adding plugin-manager/configs/3310-modem-config 00
+I> Adding plugin-manager/configs/3310-touch-config 00
+I> Adding plugin-manager/configs/3310-displaþ
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.146874555 -0800
+++ /tmp/foob	2018-01-25 19:46:22.150874574 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.4 MiB/s
+	 3.9 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 25 19:19:57 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -91,7 +91,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953408K/1048576K available (11264K kernel code, 1564K rwdata, 4336K rodata, 2048K init, 405K bss, 29632K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953404K/1048576K available (11264K kernel code, 1568K rwdata, 4336K rodata, 2048K init, 405K bss, 29636K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,7 +101,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1565 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1569 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
@@ -138,7 +138,7 @@
 SMP: Total of 2 processors activated (4.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 254736
+Built 1 zonelists, mobility grouping on.  Total pages: 254735
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 512 (order: 3, 32768 bytes)
@@ -270,7 +270,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xe6e3457f, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf52d7f3f, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -345,13 +345,13 @@
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
- mmcblk1: p1 p2
+mmc1: new high speed SD card at address b368
 hub 2-0:1.0: USB hub found
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+ mmcblk1: p1 p2
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.158874610 -0800
+++ /tmp/foob	2018-01-25 19:46:22.162874629 -0800
@@ -48,7 +48,7 @@
 	 ##################################
 	 4.1 MiB/s
 done
-Bytes transferred = 6214528 (5ed380 hex)
+Bytes transferred = 6215440 (5ed710 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ed380 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ed710 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:18:48 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959416K/1048576K available (9216K kernel code, 782K rwdata, 2584K rodata, 1024K init, 298K bss, 23624K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959416K/1048576K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 23624K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xbd7913aa, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x1cfef850, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -344,8 +344,8 @@
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+hub 1-1:1.0: 4 ports detected
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.178874702 -0800
+++ /tmp/foob	2018-01-25 19:46:22.178874702 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 732662 us
-Basic modules init took 351134 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14365 us
-Carveout took 252696 us
-CPU initialization took 92458 us
-Total time taken by TegraBoot 710653 us
+Tegraboot started after 732384 us
+Basic modules init took 348713 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14360 us
+Carveout took 253345 us
+CPU initialization took 92975 us
+Total time taken by TegraBoot 709393 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.574] LPDDR4 Training: Number of tables = 10
+64b[0001.573] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17453568 bytes read in 876 ms (19 MiB/s)
+17457664 bytes read in 877 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44914 bytes read in 454 ms (95.7 KiB/s)
+44914 bytes read in 453 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:44:48 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 25 19:23:08 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 24 pages/cpu @        (ptrval) s57600 r8192 d32512 u98304
-pcpu-alloc: s57600 r8192 d32512 u98304 alloc=24*4096
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
+pcpu-alloc: s57984 r8192 d32128 u98304 alloc=24*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981680K/3131392K available (9852K kernel code, 1236K rwdata, 4732K rodata, 1152K init, 404K bss, 133328K reserved, 16384K cma-reserved)
+Memory: 2981676K/3131392K available (9852K kernel code, 1240K rwdata, 4740K rodata, 1152K init, 404K bss, 133332K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -213,7 +213,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749516
+Built 1 zonelists, mobility grouping on.  Total pages: 749515
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000eea5893d, 1 data @ 0000000004050515)
+vdso: 2 pages (1 code @ 0000000071622fff, 1 data @ 000000001cae7daa)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -259,7 +259,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a05000
+kvm [1]: IDMAP page: 80a0b000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -280,6 +280,7 @@
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.198874795 -0800
+++ /tmp/foob	2018-01-25 19:46:22.202874812 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 758757 us
-Basic modules init took 348316 us
+Tegraboot started after 726833 us
+Basic modules init took 348505 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14392 us
-Carveout took 252834 us
-CPU initialization took 92454 us
-Total time taken by TegraBoot 707996 us
+Next stage binary read took 14374 us
+Carveout took 252675 us
+CPU initialization took 92457 us
+Total time taken by TegraBoot 708011 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.597] LPDDR4 Training: Number of tables = 10
+64b[0001.566] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17191424 bytes read in 855 ms (19.2 MiB/s)
+17261056 bytes read in 855 ms (19.3 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 25 19:26:17 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 24 pages/cpu @        (ptrval) s57600 r8192 d32512 u98304
-pcpu-alloc: s57600 r8192 d32512 u98304 alloc=24*4096
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
+pcpu-alloc: s57984 r8192 d32128 u98304 alloc=24*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981936K/3131392K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 133072K reserved, 16384K cma-reserved)
+Memory: 2981868K/3131392K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 133140K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -213,7 +213,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749580
+Built 1 zonelists, mobility grouping on.  Total pages: 749563
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000032127f91, 1 data @ 00000000d35088fd)
+vdso: 2 pages (1 code @ 000000005bafee51, 1 data @ 00000000f3b19a9e)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -259,7 +259,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809fd000
+kvm [1]: IDMAP page: 80a03000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -280,6 +280,7 @@
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.234874959 -0800
+++ /tmp/foob	2018-01-25 19:46:22.234874959 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 25 19:26:17 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -22,7 +22,7 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
 random: get_random_bytes called from start_kernel+0xb0/0x414 with crng_init=0
-percpu: Embedded 24 pages/cpu @        (ptrval) s57600 r8192 d32512 u98304
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -30,7 +30,7 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835084K/2988032K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 136564K reserved, 16384K cma-reserved)
+Memory: 2835016K/2988032K available (9788K kernel code, 1240K rwdata, 4608K rodata, 1152K init, 404K bss, 136632K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -89,7 +89,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 712867
+Built 1 zonelists, mobility grouping on.  Total pages: 712850
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -99,7 +99,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000af0e11ef, 1 data @ 00000000a927d6e9)
+vdso: 2 pages (1 code @ 00000000c9dc2b4c, 1 data @ 000000009eb6168f)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -142,7 +142,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809fd000
+kvm [1]: IDMAP page: 80a03000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -164,6 +164,7 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -254,10 +255,12 @@
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-11-03 23:19:53 UTC (1004829593)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
+max77686-rtc max77620-rtc: setting system clock to 2001-11-06 08:56:08 UTC (1005036968)
 PP1200_AVDD: disabling
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 PP1200_RCAM: disabling
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP2800L_RCAM: disabling
 PP2800L_FCAM: disabling
 PP_LDO6: disabling
@@ -266,9 +269,7 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-[p3 p4 p5 p6 p7 p8 p9 p10 p11
 Freeing unused kernel memory: 1152K
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.254875051 -0800
+++ /tmp/foob	2018-01-25 19:46:22.258875069 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.3 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
+Linux version 4.15.0-rc9-next-20180126-347956-gf0701bf7db7a (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 25 19:19:57 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992512K/2096128K available (11264K kernel code, 1564K rwdata, 4336K rodata, 2048K init, 405K bss, 38080K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992508K/2096128K available (11264K kernel code, 1568K rwdata, 4336K rodata, 2048K init, 405K bss, 38084K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,7 +93,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1565 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1569 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -132,7 +132,7 @@
 SMP: Total of 4 processors activated (8.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 514512
+Built 1 zonelists, mobility grouping on.  Total pages: 514511
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -317,20 +317,20 @@
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie: 2x3 configuration
-tegra-pcie 3000.pcie: probing port 0, using 2 lanes
 mmc0: new ultra high speed DDR50 SDHC card at address aaaa
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+tegra-pcie 3000.pcie: 2x3 configuration
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
+tegra-pcie 3000.pcie: probing port 0, using 2 lanes
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (236:0)
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
  mmcblk0: p1 p2 p3
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
@@ -376,7 +376,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x8f69a6c2, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x9a9914c2, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -407,5 +407,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.093624] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.104452] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-25 19:46:22.266875106 -0800
+++ /tmp/foob	2018-01-25 19:46:22.270875124 -0800
@@ -40,18 +40,18 @@
 	 ##################################
 	 2.9 MiB/s
 done
-Bytes transferred = 6214528 (5ed380 hex)
+Bytes transferred = 6215440 (5ed710 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 750 KiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ed380 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ed710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
+Linux version 4.15.0-rc9-next-20180126-28007-gf0701bf (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 25 19:18:48 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -80,7 +80,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998524K/2096128K available (9216K kernel code, 782K rwdata, 2584K rodata, 1024K init, 298K bss, 32068K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998524K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32068K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,7 +90,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 783 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xb89ecad9, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x015345fb, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.378635] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.378617] usb 2-1: new high-speed USB device number 2 using tegra-ehci
