U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.2 MiB/s done Bytes transferred = 6377936 (6151d0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 276.4 KiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 782K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 783 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008018] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017550] Switching to timer-based delay loop, resolution 1000ns [ 0.024066] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029770] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040517] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048488] Switching to timer-based delay loop, resolution 83ns [ 0.054665] Console: colour dummy device 80x30 [ 0.058897] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069207] pid_max: default: 32768 minimum: 301 [ 0.073972] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080388] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087727] CPU: Testing write buffer coherency: ok [ 0.092402] /cpus/cpu@0 missing clock-frequency property [ 0.097551] /cpus/cpu@1 missing clock-frequency property [ 0.102848] /cpus/cpu@2 missing clock-frequency property [ 0.108124] /cpus/cpu@3 missing clock-frequency property [ 0.113408] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153451] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158107] Hierarchical SRCU implementation. [ 0.173665] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193454] smp: Bringing up secondary CPUs ... [ 0.243754] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323780] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403819] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413598] smp: Brought up 1 node, 4 CPUs [ 0.432682] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438835] CPU: All CPU(s) started in SVC mode. [ 0.444122] devtmpfs: initialized [ 0.453666] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458712] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466340] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475956] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482245] pinctrl core: initialized pinctrl subsystem [ 0.487770] NET: Registered protocol family 16 [ 0.492173] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499098] cpuidle: using governor menu [ 0.510133] No ATAGs? [ 0.510192] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518534] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525226] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532897] iommu: Adding device 50000000.host1x to group 0 [ 0.538309] iommu: Adding device 54200000.dc to group 1 [ 0.543509] iommu: Adding device 54240000.dc to group 1 [ 0.548710] iommu: Adding device 57000000.gpu to group 2 [ 0.559860] +5V_SYS: supplied by +VDD_MUX [ 0.562087] +3.3V_SYS: supplied by +VDD_MUX [ 0.566413] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571747] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579850] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585787] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593899] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599653] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607782] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613520] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621692] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628513] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636701] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642553] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651154] vgaarb: loaded [ 0.653656] SCSI subsystem initialized [ 0.660759] libata version 3.00 loaded. [ 0.662794] usbcore: registered new interface driver usbfs [ 0.668160] usbcore: registered new interface driver hub [ 0.673479] usbcore: registered new device driver usb [ 0.679684] Linux video capture interface: v2.00 [ 0.683067] pps_core: LinuxPPS API ver. 1 registered [ 0.687993] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.697095] PTP clock support registered [ 0.701144] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.708355] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714527] Advanced Linux Sound Architecture Driver Initialized. [ 0.720736] Bluetooth: Core ver 2.22 [ 0.724054] NET: Registered protocol family 31 [ 0.728472] Bluetooth: HCI device and connection manager initialized [ 0.734786] Bluetooth: HCI socket layer initialized [ 0.739643] Bluetooth: L2CAP socket layer initialized [ 0.744678] Bluetooth: SCO socket layer initialized [ 0.749761] clocksource: Switched to clocksource arch_sys_counter [ 0.788169] NET: Registered protocol family 2 [ 0.790989] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.798257] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.805312] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.811736] TCP: Hash tables configured (established 8192 bind 8192) [ 0.818174] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.823924] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.830346] NET: Registered protocol family 1 [ 0.834836] RPC: Registered named UNIX socket transport module. [ 0.840462] RPC: Registered udp transport module. [ 0.845122] RPC: Registered tcp transport module. [ 0.849808] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.856453] PCI: CLS 0 bytes, default 64 [ 0.860815] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.868917] Initialise system trusted keyrings [ 0.872780] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.879583] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.895200] NFS: Registering the id_resolver key type [ 0.898337] Key type id_resolver registered [ 0.902503] Key type id_legacy registered [ 0.908179] Key type asymmetric registered [ 0.910567] Asymmetric key parser 'x509' registered [ 0.915452] bounce: pool size: 64 pages [ 0.919239] io scheduler noop registered (default) [ 0.923992] io scheduler mq-deadline registered [ 0.928490] io scheduler kyber registered [ 0.933132] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.945518] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.951606] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.960405] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.967192] console [ttyS0] disabled [ 0.970171] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.979001] console [ttyS0] enabled [ 0.979001] console [ttyS0] enabled [ 0.985248] bootconsole [earlycon0] disabled [ 0.985248] bootconsole [earlycon0] disabled [ 1.010011] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.016485] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.024004] panel-simple panel: panel supply power not found, using dummy regulator [ 1.035419] loop: module loaded [ 1.039122] as3722 4-0040: AS3722 with revision 0x1 found [ 1.049228] as3722-sd2: supplied by +5V_SYS [ 1.053666] as3722-sd3: supplied by +5V_SYS [ 1.058001] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.064189] as3722-sd4: supplied by +5V_SYS [ 1.068526] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074285] as3722-sd5: supplied by +5V_SYS [ 1.079887] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085636] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091664] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.097292] as3722-ldo3: supplied by +3.3V_SYS [ 1.101751] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109332] as3722-ldo4: supplied by +3.3V_SYS [ 1.113939] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119963] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.124736] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131437] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137472] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.142255] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.148809] as3722-ldo9: supplied by +5V_SYS [ 1.153388] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159589] as3722-ldo10: supplied by +5V_SYS [ 1.164110] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170569] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.192929] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207831] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213344] libphy: Fixed MDIO Bus: probed [ 1.217430] CAN device driver interface [ 1.221289] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228232] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233849] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241286] usbcore: registered new interface driver pegasus [ 1.246954] usbcore: registered new interface driver asix [ 1.252374] usbcore: registered new interface driver ax88179_178a [ 1.258468] usbcore: registered new interface driver cdc_ether [ 1.264319] usbcore: registered new interface driver smsc75xx [ 1.270084] usbcore: registered new interface driver smsc95xx [ 1.275832] usbcore: registered new interface driver net1080 [ 1.281502] usbcore: registered new interface driver cdc_subset [ 1.287423] usbcore: registered new interface driver zaurus [ 1.293017] usbcore: registered new interface driver cdc_ncm [ 1.298753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305272] ehci-pci: EHCI PCI platform driver [ 1.309724] tegra-ehci: Tegra EHCI driver [ 1.314003] usbcore: registered new interface driver cdc_acm [ 1.319647] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327660] usbcore: registered new interface driver cdc_wdm [ 1.333335] usbcore: registered new interface driver usb-storage [ 1.340007] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359619] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366486] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373256] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380403] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386681] i2c /dev entries driver [ 1.390606] usbcore: registered new interface driver uvcvideo [ 1.396336] USB Video Class driver (1.1.1) [ 1.400428] gspca_main: v2.14.0 registered [ 1.404748] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413416] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421763] sdhci: Secure Digital Host Controller Interface driver [ 1.427927] sdhci: Copyright(c) Pierre Ossman [ 1.432282] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438054] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.449888] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.454760] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475791] mmc0: Unknown controller version (3). You may experience problems. [ 1.483031] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519803] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527514] usbcore: registered new interface driver usbhid [ 1.533194] usbhid: USB HID core driver [ 1.539296] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.580259] max98090 0-0010: MAX98090 REVID=0x43 [ 1.586804] max98090 0-0010: use default 2.8v micbias [ 1.594301] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.601598] mmc0: new high speed MMC card at address 0001 [ 1.608829] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.614340] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.615304] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.622358] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.630016] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.636444] NET: Registered protocol family 10 [ 1.641753] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.646712] Segment Routing with IPv6 [ 1.656471] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.657003] mip6: Mobile IPv6 [ 1.665531] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.672001] NET: Registered protocol family 17 [ 1.676439] NET: Registered protocol family 15 [ 1.680882] can: controller area network core (rev 20170425 abi 9) [ 1.687122] NET: Registered protocol family 29 [ 1.691561] can: raw protocol (rev 20170425) [ 1.695818] can: broadcast manager protocol (rev 20170425 t) [ 1.701471] can: netlink gateway (rev 20170425) max_hops=1 [ 1.707013] Bluetooth: RFCOMM socket layer initialized [ 1.712153] Bluetooth: RFCOMM ver 1.11 [ 1.715895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.721200] Bluetooth: BNEP socket layer initialized [ 1.726150] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.732062] Bluetooth: HIDP socket layer initialized [ 1.737114] Key type dns_resolver registered [ 1.741586] Registering SWP/SWPB emulation handler [ 1.746649] Loading compiled-in X.509 certificates [ 1.758524] +3.3V_RUN: supplied by +3.3V_SYS [ 1.763521] +VDD_LED: supplied by +VDD_MUX [ 1.767710] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.773384] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.778081] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.782844] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.788083] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.792714] +5V_USB_HS: supplied by +5V_SYS [ 1.797039] +5V_USB_SS: supplied by +5V_SYS [ 1.802273] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.807617] +3.3V_LP0: supplied by +3.3V_SYS [ 1.812650] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.818477] +5V_HDMI_CON: supplied by +5V_SYS [ 1.823469] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.830213] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.843199] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.849411] panel-simple panel: panel supply power not found, using dummy regulator [ 1.920487] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.927885] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.933297] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.942859] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.951496] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.958015] hub 1-0:1.0: USB hub found [ 1.961835] hub 1-0:1.0: 6 ports detected [ 1.966209] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.971638] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.979329] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.988004] hub 2-0:1.0: USB hub found [ 1.991822] hub 2-0:1.0: 2 ports detected [ 1.996582] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.010046] mmc1: Unknown controller version (3). You may experience problems. [ 2.017292] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.023633] mmc1: Switching to 3.3V signalling voltage failed [ 2.052497] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.060197] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.065089] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.075427] mmc2: Unknown controller version (3). You may experience problems. [ 2.082768] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.118902] mmc1: new high speed SDIO card at address 0001 [ 2.124720] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.132328] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.138489] panel-simple panel: panel supply power not found, using dummy regulator [ 2.146778] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.153542] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.159837] panel-simple panel: panel supply power not found, using dummy regulator [ 2.167553] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 2.176318] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.186029] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.192700] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.194312] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.201327] cfg80211: failed to load regulatory.db [ 2.210754] +1.8V_RUN_CAM: disabling [ 2.214580] +1.2V_RUN_CAM_FRONT: disabling [ 2.218852] +1.05V_RUN_CAM_REAR: disabling [ 2.223219] +2.8V_RUN_TOUCH: disabling [ 2.227193] +2.8V_RUN_CAM_AF: disabling [ 2.231343] +1.8V_RUN_VPP_FUSE: disabling [ 2.235552] +VDD_LED: disabling [ 2.238689] +5V_VDD_TS_SW: disabling [ 2.242310] +3.3V_PANEL: disabling [ 2.245704] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.250304] +5V_HDMI_CON: disabling [ 2.253832] ALSA device list: [ 2.256822] #1: GoogleNyanBig [ 2.300305] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.306438] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.306724] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.323337] panel-simple panel: panel supply power not found, using dummy regulator [ 2.329817] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.337919] mmc2: new high speed SDHC card at address 0007 [ 2.345337] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.358770] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.364977] GPT:3014591 != 15564799 [ 2.368456] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.375869] GPT:3014591 != 15564799 [ 2.379348] GPT: Use GNU Parted to correct GPT errors. [ 2.384531] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.392544] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.398772] panel-simple panel: panel supply power not found, using dummy regulator [ 2.635785] EXT4-fs (mmcblk0p3): recovery complete [ 2.641306] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.649416] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.656034] devtmpfs: mounted [ 2.659439] Freeing unused kernel memory: 1024K [ 2.672365] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.687362] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.697412] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.703730] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.890473] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.896153] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.901480] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.906784] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.912093] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.917397] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.922729] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.928033] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.933345] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.938647] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.089855] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.759202] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.770246] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.776410] panel-simple panel: panel supply power not found, using dummy regulator [ 4.119859] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.308240] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.314950] scsi host0: usb-storage 1-1:1.0 [ 4.319561] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.325752] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.321556] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.330232] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.336446] panel-simple panel: panel supply power not found, using dummy regulator [ 5.527657] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) rtcwake -d rtc1 -m mem -s 3 [ 5.536888] sd 0:0:0:0: [sda] Write Protect is off [ 5.542797] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.549061] sd 0:0:0:0: [sda] No Caching mode page found [ 5.554400] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 5.584455] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.597188] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.601184] PM: suspend entry (deep) [ 5.606238] PM: Syncing filesystems ... done. [ 5.612588] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.620732] OOM killer disabled. [ 5.623952] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.632596] Suspending console(s) (use no_console_suspend to debug) [ 5.833639] Disabling non-boot CPUs ... [ 5.949947] IRQ17 no longer affine to CPU2 [ 6.010675] Entering suspend state LP1 [ 6.010701] Enabling non-boot CPUs ... [ 6.011465] CPU1 is up [ 6.012123] CPU2 is up [ 6.012826] CPU3 is up [ 6.053579] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.065933] mmc1: Switching to 3.3V signalling voltage failed [ 6.594600] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.594768] panel-simple panel: panel supply power not found, using dummy regulator [ 6.642229] OOM killer enabled. [ 6.645358] Restarting tasks ... done. [ 6.649963] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.598673] PM: suspend entry (deep) [ 7.602263] PM: Syncing filesystems ... done. [ 7.607547] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.615616] OOM killer disabled. [ 7.618832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.627402] Suspending console(s) (use no_console_suspend to debug) [ 7.813153] Disabling non-boot CPUs ... [ 7.919914] IRQ17 no longer affine to CPU2 [ 7.980451] Entering suspend state LP1 [ 7.980477] Enabling non-boot CPUs ... [ 7.981274] CPU1 is up [ 7.981946] CPU2 is up [ 7.982664] CPU3 is up [ 8.023812] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.036045] mmc1: Switching to 3.3V signalling voltage failed [ 8.564586] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.564754] panel-simple panel: panel supply power not found, using dummy regulator [ 8.612276] OOM killer enabled. [ 8.615408] Restarting tasks ... done. [ 8.619993] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 9.568583] PM: suspend entry (deep) [ 9.572172] PM: Syncing filesystems ... done. [ 9.577709] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.585797] OOM killer disabled. [ 9.589013] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.597597] Suspending console(s) (use no_console_suspend to debug) [ 9.783298] Disabling non-boot CPUs ... [ 9.829917] IRQ17 no longer affine to CPU1 [ 9.960432] Entering suspend state LP1 [ 9.960458] Enabling non-boot CPUs ... [ 9.961258] CPU1 is up [ 9.961919] CPU2 is up [ 9.962642] CPU3 is up [ 10.003727] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.015972] mmc1: Switching to 3.3V signalling voltage failed [ 10.542826] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.542995] panel-simple panel: panel supply power not found, using dummy regulator [ 10.590461] OOM killer enabled. [ 10.593590] Restarting tasks ... done. [ 10.597795] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 11.548404] PM: suspend entry (deep) [ 11.551992] PM: Syncing filesystems ... done. [ 11.557460] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.565546] OOM killer disabled. [ 11.568762] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.577345] Suspending console(s) (use no_console_suspend to debug) [ 11.762993] Disabling non-boot CPUs ... [ 11.939839] IRQ17 no longer affine to CPU3 [ 11.940402] Entering suspend state LP1 [ 11.940428] Enabling non-boot CPUs ... [ 11.941228] CPU1 is up [ 11.941892] CPU2 is up [ 11.942608] CPU3 is up [ 11.983781] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.995927] mmc1: Switching to 3.3V signalling voltage failed [ 12.210147] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.525041] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.525210] panel-simple panel: panel supply power not found, using dummy regulator [ 12.579530] OOM killer enabled. [ 12.582665] Restarting tasks ... done. [ 12.586880] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 13.527945] PM: suspend entry (deep) [ 13.531534] PM: Syncing filesystems ... done. [ 13.536995] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.545082] OOM killer disabled. [ 13.548298] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.556903] Suspending console(s) (use no_console_suspend to debug) [ 13.743111] Disabling non-boot CPUs ... [ 13.910368] Entering suspend state LP1 [ 13.910394] Enabling non-boot CPUs ... [ 13.911195] CPU1 is up [ 13.911860] CPU2 is up [ 13.912576] CPU3 is up [ 13.953675] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.966375] mmc1: Switching to 3.3V signalling voltage failed [ 14.492860] tegra-sor 54540000.sor: failed to probe output: -517 [ 14.493029] panel-simple panel: panel supply power not found, using dummy regulator [ 14.536469] OOM killer enabled. [ 14.539599] Restarting tasks ... done. [ 14.544080] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 15.497582] PM: suspend entry (deep) [ 15.501158] PM: Syncing filesystems ... done. [ 15.506615] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.514698] OOM killer disabled. [ 15.517914] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.526516] Suspending console(s) (use no_console_suspend to debug) [ 15.713380] Disabling non-boot CPUs ... [ 15.880345] Entering suspend state LP1 [ 15.880371] Enabling non-boot CPUs ... [ 15.881170] CPU1 is up [ 15.881828] CPU2 is up [ 15.882546] CPU3 is up [ 15.923734] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.935995] mmc1: Switching to 3.3V signalling voltage failed [ 16.150132] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 16.465331] tegra-sor 54540000.sor: failed to probe output: -517 [ 16.465500] panel-simple panel: panel supply power not found, using dummy regulator [ 16.515743] OOM killer enabled. [ 16.518872] Restarting tasks ... done. [ 16.523114] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 17.467551] PM: suspend entry (deep) [ 17.471128] PM: Syncing filesystems ... done. [ 17.476593] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.484773] OOM killer disabled. [ 17.487989] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.496600] Suspending console(s) (use no_console_suspend to debug) [ 17.683203] Disabling non-boot CPUs ... [ 17.850318] Entering suspend state LP1 [ 17.850343] Enabling non-boot CPUs ... [ 17.851146] CPU1 is up [ 17.851806] CPU2 is up [ 17.852520] CPU3 is up [ 17.893638] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.906283] mmc1: Switching to 3.3V signalling voltage failed [ 18.435263] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.435433] panel-simple panel: panel supply power not found, using dummy regulator [ 18.478802] OOM killer enabled. [ 18.481945] Restarting tasks ... done. [ 18.486177] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 19.437527] PM: suspend entry (deep) [ 19.441103] PM: Syncing filesystems ... done. [ 19.446563] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.454645] OOM killer disabled. [ 19.457861] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.466465] Suspending console(s) (use no_console_suspend to debug) [ 19.653010] Disabling non-boot CPUs ... [ 19.759766] IRQ17 no longer affine to CPU2 [ 19.820289] Entering suspend state LP1 [ 19.820316] Enabling non-boot CPUs ... [ 19.821116] CPU1 is up [ 19.821777] CPU2 is up [ 19.822498] CPU3 is up [ 19.863430] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.875710] mmc1: Switching to 3.3V signalling voltage failed [ 20.090089] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 20.404309] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.404477] panel-simple panel: panel supply power not found, using dummy regulator [ 20.458808] OOM killer enabled. [ 20.461948] Restarting tasks ... done. [ 20.466202] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 21.409424] PM: suspend entry (deep) [ 21.413026] PM: Syncing filesystems ... done. [ 21.418757] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.426902] OOM killer disabled. [ 21.430153] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.438801] Suspending console(s) (use no_console_suspend to debug) [ 21.623011] Disabling non-boot CPUs ... [ 21.800272] Entering suspend state LP1 [ 21.800297] Enabling non-boot CPUs ... [ 21.801100] CPU1 is up [ 21.801758] CPU2 is up [ 21.802476] CPU3 is up [ 21.843888] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.856143] mmc1: Switching to 3.3V signalling voltage failed [ 22.070062] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 22.385073] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.385241] panel-simple panel: panel supply power not found, using dummy regulator [ 22.435562] OOM killer enabled. [ 22.438703] Restarting tasks ... done. [ 22.443499] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 23.389581] PM: suspend entry (deep) [ 23.393149] PM: Syncing filesystems ... done. [ 23.398643] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.406805] OOM killer disabled. [ 23.410040] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.418626] Suspending console(s) (use no_console_suspend to debug) [ 23.602799] Disabling non-boot CPUs ... [ 23.780259] Entering suspend state LP1 [ 23.780285] Enabling non-boot CPUs ... [ 23.781089] CPU1 is up [ 23.781751] CPU2 is up [ 23.782474] CPU3 is up [ 23.823695] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.835934] mmc1: Switching to 3.3V signalling voltage failed [ 24.050036] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 24.365069] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.365239] panel-simple panel: panel supply power not found, using dummy regulator [ 24.415476] OOM killer enabled. [ 24.418605] Restarting tasks ... done. [ 24.422832] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE