U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.4 MiB/s done Bytes transferred = 6377936 (6151d0 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.3 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997464K/2096128K available (9216K kernel code, 782K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 783 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007455] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016984] Switching to timer-based delay loop, resolution 1000ns [ 0.024158] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029207] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039954] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047923] Switching to timer-based delay loop, resolution 83ns [ 0.054393] Console: colour dummy device 80x30 [ 0.058339] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068648] pid_max: default: 32768 minimum: 301 [ 0.073732] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079833] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087671] CPU: Testing write buffer coherency: ok [ 0.092005] /cpus/cpu@0 missing clock-frequency property [ 0.097007] /cpus/cpu@1 missing clock-frequency property [ 0.102317] /cpus/cpu@2 missing clock-frequency property [ 0.107580] /cpus/cpu@3 missing clock-frequency property [ 0.112852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152967] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157721] Hierarchical SRCU implementation. [ 0.173493] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.192990] smp: Bringing up secondary CPUs ... [ 0.243619] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323731] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403849] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413426] smp: Brought up 1 node, 4 CPUs [ 0.432531] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438683] CPU: All CPU(s) started in SVC mode. [ 0.445115] devtmpfs: initialized [ 0.466729] Built 1 zonelists, mobility grouping on. Total pages: 515750 [ 0.472001] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.489055] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.495441] pinctrl core: initialized pinctrl subsystem [ 0.501602] NET: Registered protocol family 16 [ 0.506042] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.513149] cpuidle: using governor menu [ 0.539116] No ATAGs? [ 0.539253] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.547615] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.555386] iommu: Adding device 50000000.host1x to group 0 [ 0.559153] iommu: Adding device 54200000.dc to group 1 [ 0.564299] iommu: Adding device 54240000.dc to group 1 [ 0.569540] iommu: Adding device 57000000.gpu to group 2 [ 0.592245] +5V_SYS: supplied by +VDD_MUX [ 0.594740] +3.3V_SYS: supplied by +VDD_MUX [ 0.599319] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.604615] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.612742] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.618466] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.626698] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.633495] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.641688] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.647503] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.655728] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.661278] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.669507] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.675149] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.684592] vgaarb: loaded [ 0.686754] SCSI subsystem initialized [ 0.689920] libata version 3.00 loaded. [ 0.693830] usbcore: registered new interface driver usbfs [ 0.699044] usbcore: registered new interface driver hub [ 0.704339] usbcore: registered new device driver usb [ 0.712544] Linux video capture interface: v2.00 [ 0.715329] pps_core: LinuxPPS API ver. 1 registered [ 0.720212] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.729329] PTP clock support registered [ 0.734656] Advanced Linux Sound Architecture Driver Initialized. [ 0.739925] Bluetooth: Core ver 2.22 [ 0.742864] NET: Registered protocol family 31 [ 0.747258] Bluetooth: HCI device and connection manager initialized [ 0.753564] Bluetooth: HCI socket layer initialized [ 0.758440] Bluetooth: L2CAP socket layer initialized [ 0.763472] Bluetooth: SCO socket layer initialized [ 0.768915] clocksource: Switched to clocksource arch_sys_counter [ 0.868867] NET: Registered protocol family 2 [ 0.872330] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.879045] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.886054] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.892577] TCP: Hash tables configured (established 8192 bind 8192) [ 0.899207] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.904632] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.911281] NET: Registered protocol family 1 [ 0.915959] RPC: Registered named UNIX socket transport module. [ 0.921176] RPC: Registered udp transport module. [ 0.925828] RPC: Registered tcp transport module. [ 0.930530] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.937551] PCI: CLS 0 bytes, default 64 [ 0.942657] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.950788] Initialise system trusted keyrings [ 0.953565] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.961212] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.976418] NFS: Registering the id_resolver key type [ 0.979604] Key type id_resolver registered [ 0.983716] Key type id_legacy registered [ 0.992667] Key type asymmetric registered [ 0.994854] Asymmetric key parser 'x509' registered [ 0.999870] bounce: pool size: 64 pages [ 1.003590] io scheduler noop registered (default) [ 1.008288] io scheduler mq-deadline registered [ 1.012819] io scheduler kyber registered [ 1.018633] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.023674] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.030579] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.046631] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.050363] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.060273] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.071013] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.077975] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.083622] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.091185] console [ttyS0] disabled [ 1.092896] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.102218] console [ttyS0] enabled [ 1.102218] console [ttyS0] enabled [ 1.108023] bootconsole [earlycon0] disabled [ 1.108023] bootconsole [earlycon0] disabled [ 1.117429] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.128466] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.157297] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.177264] loop: module loaded [ 1.181893] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.189363] as3722 4-0040: AS3722 with revision 0x1 found [ 1.201708] as3722-sd2: supplied by +5V_SYS [ 1.206396] as3722-sd3: supplied by +5V_SYS [ 1.210844] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.217227] as3722-sd4: supplied by +5V_SYS [ 1.221921] as3722-sd5: supplied by +5V_SYS [ 1.228016] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.234231] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.240503] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.246454] as3722-ldo3: supplied by +3.3V_SYS [ 1.250987] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.258788] as3722-ldo4: supplied by +3.3V_SYS [ 1.263489] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.269753] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.274604] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.281603] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.287256] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.293459] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.304770] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.323206] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.330140] libphy: Fixed MDIO Bus: probed [ 1.334233] CAN device driver interface [ 1.338115] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.345319] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.351075] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.358525] usbcore: registered new interface driver pegasus [ 1.364275] usbcore: registered new interface driver asix [ 1.369744] usbcore: registered new interface driver ax88179_178a [ 1.375883] usbcore: registered new interface driver cdc_ether [ 1.381800] usbcore: registered new interface driver smsc75xx [ 1.387612] usbcore: registered new interface driver smsc95xx [ 1.393428] usbcore: registered new interface driver net1080 [ 1.399158] usbcore: registered new interface driver cdc_subset [ 1.405124] usbcore: registered new interface driver zaurus [ 1.410782] usbcore: registered new interface driver cdc_ncm [ 1.416680] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.422329] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.428027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.434569] ehci-pci: EHCI PCI platform driver [ 1.439087] tegra-ehci: Tegra EHCI driver [ 1.445937] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.451379] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.459211] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.488949] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.495784] hub 1-0:1.0: USB hub found [ 1.499596] hub 1-0:1.0: 1 port detected [ 1.504777] usbcore: registered new interface driver cdc_acm [ 1.510451] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.518504] usbcore: registered new interface driver cdc_wdm [ 1.524265] usbcore: registered new interface driver usb-storage [ 1.538721] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.545616] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.553434] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.560635] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.567155] i2c /dev entries driver [ 1.571953] usbcore: registered new interface driver uvcvideo [ 1.577691] USB Video Class driver (1.1.1) [ 1.581805] gspca_main: v2.14.0 registered [ 1.586543] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.596881] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.605786] sdhci: Secure Digital Host Controller Interface driver [ 1.612116] sdhci: Copyright(c) Pierre Ossman [ 1.616468] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.622483] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.627375] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.648674] mmc0: Unknown controller version (3). You may experience problems. [ 1.655955] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.693095] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.701489] usbcore: registered new interface driver usbhid [ 1.707097] usbhid: USB HID core driver [ 1.751078] mmc0: new high speed MMC card at address 0001 [ 1.761788] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.771502] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.782536] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.788685] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.797865] mmcblk0: p1 [ 2.150348] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.170662] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.181579] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.192888] NET: Registered protocol family 10 [ 2.198766] Segment Routing with IPv6 [ 2.202631] mip6: Mobile IPv6 [ 2.205599] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.213054] NET: Registered protocol family 17 [ 2.217511] NET: Registered protocol family 15 [ 2.222012] can: controller area network core (rev 20170425 abi 9) [ 2.228414] NET: Registered protocol family 29 [ 2.232874] can: raw protocol (rev 20170425) [ 2.237139] can: broadcast manager protocol (rev 20170425 t) [ 2.242818] can: netlink gateway (rev 20170425) max_hops=1 [ 2.248482] Bluetooth: RFCOMM socket layer initialized [ 2.253690] Bluetooth: RFCOMM ver 1.11 [ 2.257458] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.262788] Bluetooth: BNEP socket layer initialized [ 2.267747] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.273683] Bluetooth: HIDP socket layer initialized [ 2.278870] Key type dns_resolver registered [ 2.283720] Registering SWP/SWPB emulation handler [ 2.289353] Loading compiled-in X.509 certificates [ 2.314032] +3.3V_RUN: supplied by +3.3V_SYS [ 2.319141] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.323936] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.329855] +5V_USB_HS: supplied by +5V_SYS [ 2.334877] +3.3V_LP0: supplied by +3.3V_SYS [ 2.340456] +5V_HDMI_CON: supplied by +5V_SYS [ 2.345256] +5V_SATA: supplied by +5V_SYS [ 2.349751] +12V_SATA: supplied by +VDD_MUX [ 2.355352] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.362284] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.369420] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.376921] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.382561] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.391703] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.401029] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.409399] as3722-sd2: supplied by +5V_SYS [ 2.413895] as3722-sd3: supplied by +5V_SYS [ 2.418386] as3722-sd4: supplied by +5V_SYS [ 2.423085] as3722-sd5: supplied by +5V_SYS [ 2.428788] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.434516] as3722-ldo1: supplied by +3.3V_RUN [ 2.439362] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.444997] as3722-ldo3: supplied by +3.3V_SYS [ 2.450695] as3722-ldo4: supplied by +3.3V_SYS [ 2.455445] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.461352] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.469991] as3722-ldo6: supplied by +3.3V_RUN [ 2.474995] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.480417] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.487497] as3722-ldo9: supplied by +5V_SYS [ 2.493009] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.499781] as3722-ldo10: supplied by +5V_SYS [ 2.504891] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.511765] as3722-ldo11: supplied by +3.3V_RUN [ 2.517052] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.526346] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.535425] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.545983] scsi host0: tegra-ahci [ 2.550453] scsi host1: tegra-ahci [ 2.554169] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.562213] ata2: DUMMY [ 2.565924] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.571414] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.579304] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.609048] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.616184] hub 2-0:1.0: USB hub found [ 2.620071] hub 2-0:1.0: 1 port detected [ 2.689670] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.697096] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.702543] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 2.712686] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.721372] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 2.728504] hub 3-0:1.0: USB hub found [ 2.732390] hub 3-0:1.0: 6 ports detected [ 2.737288] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.742765] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 2.750531] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.759996] hub 4-0:1.0: USB hub found [ 2.763809] hub 4-0:1.0: 2 ports detected [ 2.769724] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.774621] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.788055] mmc1: Unknown controller version (3). You may experience problems. [ 2.795422] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.832210] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.839970] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.847779] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.855629] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.880393] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.888697] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.892298] ata1: SATA link down (SStatus 0 SControl 300) [ 2.902676] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.908988] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.915219] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.922169] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.929536] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.935069] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.941140] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.950861] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.960591] pci 0000:00:01.0: enabling Extended Tags [ 2.965557] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.975366] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.985207] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.991880] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.001910] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.007968] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.017689] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.027421] pci 0000:00:02.0: enabling Extended Tags [ 3.032407] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.042212] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.052052] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.058705] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.068745] PCI: bus0: Fast back to back transfers disabled [ 3.074375] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.082455] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.090743] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.096892] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.103971] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.121707] mmc1: new high speed SDHC card at address aaaa [ 3.132537] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.139035] PCI: bus1: Fast back to back transfers disabled [ 3.144708] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.151622] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.157685] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.163608] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.170601] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.178133] pci 0000:02:00.0: supports D1 D2 [ 3.182579] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.194611] mmcblk1: p1 p2 p3 [ 3.219113] PCI: bus2: Fast back to back transfers disabled [ 3.224704] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.231440] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.238223] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.245077] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.252888] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.259011] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.266357] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.271377] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.278178] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.285950] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.293286] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.299398] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.304359] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.310467] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.317249] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.325031] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.332150] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.338551] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.344495] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.351576] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.357931] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.364087] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.369731] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.400803] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3ad0dc5f, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.410481] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.422685] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.431996] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.438622] [drm] No driver support for vblank timestamp query. [ 3.577194] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.741372] Console: switching to colour frame buffer device 512x135 [ 3.837453] drm drm: fb0: frame buffer device [ 3.842120] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.849602] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.856927] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.865973] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.873390] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815) [ 3.882147] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.891808] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.898448] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.899221] +USB0_VBUS_SW: disabling [ 3.907115] cfg80211: failed to load regulatory.db [ 3.910689] +1.8V_RUN_CAM: disabling [ 3.919263] +2.8V_RUN_CAM: disabling [ 3.923007] +1.2V_RUN_CAM_FRONT: disabling [ 3.927265] +1.05V_RUN_CAM_REAR: disabling [ 3.931608] +3.3V_RUN_TOUCH: disabling [ 3.935568] +2.8V_RUN_CAM_AF: disabling [ 3.939648] +1.8V_RUN_VPP_FUSE: disabling [ 3.943866] ALSA device list: [ 3.946831] #0: tegra-hda at 0x70038000 irq 346 [ 3.951554] #1: NVIDIA Tegra Jetson TK1 [ 3.956496] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.011977] EXT4-fs (mmcblk0p1): recovery complete [ 4.017722] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.025898] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.036926] devtmpfs: mounted [ 4.040325] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#