Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:10.920624497 -0800
+++ /tmp/foob	2018-01-23 10:36:10.920624497 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Fri Jan 19 08:28:24 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -27,7 +27,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA32
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998328K/1048576K available (9788K kernel code, 1234K rwdata, 4592K rodata, 1152K init, 402K bss, 33864K reserved, 16384K cma-reserved)
+Memory: 998324K/1048576K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 33868K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -57,7 +57,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 253678
+Built 1 zonelists, mobility grouping on.  Total pages: 253677
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -65,9 +65,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000a790aef8, 1 data @ 0000000042f3c6d7)
+vdso: 2 pages (1 code @ 00000000f3d43bc2, 1 data @ 0000000022de8c94)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -173,7 +173,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-19 16:35:35 UTC (1516379735)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-23 18:35:23 UTC (1516732523)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:10.996624846 -0800
+++ /tmp/foob	2018-01-23 10:36:10.996624846 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.8 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 302.7 KiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Jan 19 08:22:20 PST 2018
+Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -320,14 +320,14 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb1_vbus: supplied by vdd-sys-5v0
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-mmc1: new high speed MMC card at address 0001
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
+mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
@@ -353,7 +353,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-11 23:27:02 UTC (960766022)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-16 00:46:18 UTC (961116378)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -365,4 +365,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.729223] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.739209] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.080625231 -0800
+++ /tmp/foob	2018-01-23 10:36:11.084625250 -0800
@@ -40,7 +40,7 @@
 	 ##################################
 	 2.9 MiB/s
 done
-Bytes transferred = 6213712 (5ed050 hex)
+Bytes transferred = 6214528 (5ed380 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ed050 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ed380 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-26574-ga362f6d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:21:56 PST 2018
+Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -289,8 +289,8 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmc0: new high speed SDHC card at address aaaa
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-11 23:24:20 UTC (960765860)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-16 00:35:14 UTC (961115714)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,4 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.366511] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.368457] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.136625489 -0800
+++ /tmp/foob	2018-01-23 10:36:11.140625508 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.1 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Jan 19 08:22:20 PST 2018
+Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -328,17 +328,11 @@
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
-mmc0: new high speed MMC card at address 0001
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
- mmcblk0: p1
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -351,10 +345,16 @@
 as3722-ldo5: supplied by +1.8V_VDDIO
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
+ mmcblk0: p1
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
@@ -398,8 +398,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
 ata1: SATA link down (SStatus 0 SControl 300)
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
 PCI: bus0: Fast back to back transfers disabled
@@ -443,7 +443,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf163d8c6, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xe07c6878, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -455,7 +455,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:47 UTC (946685087)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.200625784 -0800
+++ /tmp/foob	2018-01-23 10:36:11.204625802 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6213712 (5ed050 hex)
+Bytes transferred = 6214528 (5ed380 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ed050 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ed380 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-26574-ga362f6d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:21:56 PST 2018
+Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -339,9 +339,9 @@
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
@@ -388,8 +388,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 ata1: SATA link down (SStatus 0 SControl 300)
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x49af406d, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9dea3628, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -454,8 +454,8 @@
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
+cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.288626187 -0800
+++ /tmp/foob	2018-01-23 10:36:11.288626187 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.5 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6376664 (614cd8 hex)
+Bytes transferred = 6377936 (6151d0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x614cd8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-228282-ga362f6d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:22:03 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -446,7 +446,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x75e44799, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3ad0dc5f, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -458,12 +458,12 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:34 UTC (946684954)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
+cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.380626611 -0800
+++ /tmp/foob	2018-01-23 10:36:11.384626630 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Jan 19 08:22:20 PST 2018
+Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -308,9 +308,7 @@
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 usbcore: registered new interface driver usbhid
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbhid: USB HID core driver
 NET: Registered protocol family 10
 Segment Routing with IPv6
@@ -325,28 +323,30 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
+mmc0: new high speed MMC card at address 0001
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +5V_VDD_TS_SW: supplied by +5V_SYS
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
-mmc0: new high speed MMC card at address 0001
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +5V_USB_SS: supplied by +5V_SYS
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +3.3V_PANEL: supplied by +3.3V_RUN
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_LP0: supplied by +3.3V_SYS
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -357,16 +357,16 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: invalid report id data (ff)
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
 tegra-sor 54540000.sor: failed to probe output: -517
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 05:58:02 UTC (946706282)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.480627072 -0800
+++ /tmp/foob	2018-01-23 10:36:11.480627072 -0800
@@ -41,9 +41,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6213712 (5ed050 hex)
+Bytes transferred = 6214528 (5ed380 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -54,7 +54,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ed050 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ed380 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-26574-ga362f6d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:21:56 PST 2018
+Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -360,7 +360,7 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 05:53:54 UTC (946706034)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -387,13 +387,13 @@
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
+GPT: Use GNU Parted to correct GPT errors.
 panel-simple panel: panel supply power not found, using dummy regulator
-tegra-sor 54540000.sor: failed to probe output: -517
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.604627642 -0800
+++ /tmp/foob	2018-01-23 10:36:11.604627642 -0800
@@ -43,18 +43,18 @@
 	 #############################################
 	 2.8 MiB/s
 done
-Bytes transferred = 6376664 (614cd8 hex)
+Bytes transferred = 6377936 (6151d0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.9 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x614cd8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6151d0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-228282-ga362f6d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:22:03 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:33:16 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -293,15 +293,15 @@
 usbhid: USB HID core driver
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 max98090 0-0010: MAX98090 REVID=0x43
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 max98090 0-0010: use default 2.8v micbias
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
 Segment Routing with IPv6
@@ -368,12 +368,12 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 05:54:38 UTC (946706078)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
+cfg80211: failed to load regulatory.db
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -388,10 +388,10 @@
 ALSA device list:
   #1: GoogleNyanBig
 tegra-sor 54540000.sor: failed to probe output: -517
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 panel-simple panel: panel supply power not found, using dummy regulator
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -400,27 +400,27 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.616691] alloc_contig_range: [fbc77, fbc78) PFNs busy
-alloc_contig_range: [fbc78, fbc79) PFNs busy
+root@(none):/# [    2.890113] alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
-alloc_contig_range: [fbc7a, fbc7b) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
 alloc_contig_range: [fbc7d, fbc7e) PFNs busy
 alloc_contig_range: [fbc7e, fbc7f) PFNs busy
 alloc_contig_range: [fbc7f, fbc80) PFNs busy
 alloc_contig_range: [fbca1, fbca2) PFNs busy
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
+alloc_contig_range: [fbca2, fbca3) PFNs busy
+alloc_contig_range: [fbca3, fbca4) PFNs busy
 usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.680627991 -0800
+++ /tmp/foob	2018-01-23 10:36:11.680627991 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801581 us
+Bootloader-Cpu Init at (time stamp): 1801871 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801555  us
-Bootloader (AosInit) time: 733478 us
-Bootloader Main Init time: 180230 us
-BlockDevMgrInit time: 157533 us
+Miscellaneous avp time: 1801845  us
+Bootloader (AosInit) time: 734238 us
+Bootloader Main Init time: 180075 us
+BlockDevMgrInit time: 157536 us
 PartMgrInit time: 8 us
 StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77022 us 
-Display init time: 574610 us
+Partition Table load: 76691 us 
+Display init time: 574805 us
 Kernel read time: 1561 msec
-Load Kernel Size:   20688896 Bytes
-Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 4372297 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9551334 us
+Load Kernel Size:   20690944 Bytes
+Bl Kernel ReadSpeed: 13254000 Bytes/sec
+Pre-Kernel Jump time: 4372840 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9553898 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Fri Jan 19 08:28:24 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -101,7 +101,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA32
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1705444K/1775616K available (9788K kernel code, 1234K rwdata, 4592K rodata, 1152K init, 402K bss, 53788K reserved, 16384K cma-reserved)
+Memory: 1705440K/1775616K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 53792K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -132,7 +132,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 430457
+Built 1 zonelists, mobility grouping on.  Total pages: 430456
 Policy zone: DMA32
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -142,7 +142,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000008e06a25e, 1 data @ 00000000b0a1c707)
+vdso: 2 pages (1 code @ 00000000b84fe9d4, 1 data @ 00000000d51e5fc4)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -259,13 +259,13 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 NET: Registered protocol family 17
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 9pnet: Installing 9P2000 support
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 Key type dns_resolver registered
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 registered taskstats version 1
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 Loading compiled-in X.509 certificates
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.748628305 -0800
+++ /tmp/foob	2018-01-23 10:36:11.756628342 -0800
@@ -2,14 +2,14 @@
 
 Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.66 sec
+	Execution Time 56.42 sec
 	Percent passed so far: 50.0
 	
 
 
 Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 55.97 sec
+	Execution Time 56.06 sec
 	Percent passed so far: 100.0
 	
 
@@ -32,7 +32,7 @@
 I> Version of mb1 bct binary 12
 W> MB1 BCT does not have controller prod config data
 I> Bootrom patch version : 31 (correctly patched)
-I> ATE fuse revision : 0x30880
+I> ATE fuse revision : 0x40080
 I> chip revision : A02P
 I> disabled_core_mask: 0xffffff0c
 I> Enabled Cores: 0xf3
@@ -97,8 +97,8 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
-I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0760ec5c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0760ec5c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -131,12 +131,12 @@
 I> bit @ 0xd480000
 I> BR-BCT relocated to 0xf7f20000
 I> Boot-device: eMMC
-I> pmic: reset reason (nverc)	: 0x10
+I> pmic: reset reason (nverc)	: 0x90
 I> Reading GPT from 512 for device 00000003
 I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
+I> Found 14 partitions in 00000003 device
 I> Reading GPT from 512 for device 00010003
-I> Found 18 partitions in 00010003 device
+I> Found 49 partitions in 00010003 device
 I> Binary(16) of size 524480 is loaded @ 0xf7600000
 I> Binary(17) of size 326672 is loaded @ 0xf77b03e0
 I> BPMP-FW load address = 0xf7600000
@@ -219,9 +219,9 @@
 I> sdmmc bdev is already initialized
 I> Reading GPT from 512 for device 00000003
 I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
+I> Found 14 partitions in 00000003 device
 I> Reading GPT from 512 for device 00010003
-I> Found 18 partitions in 00010003 device
+I> Found 49 partitions in 00010003 device
 I> Recovery boot_type: 0
 I> Entering 3p server
 I> Entering into 3p server..
@@ -269,7 +269,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 28280060 bytes
+I> Total write size is 28284156 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -492,7 +492,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -515,71 +515,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.774] I> [OK]
+I> Checking boot.img header magic ... [0001.787] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.791] I> Done
-I> Move ramdisk (len: 6265161) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.804] I> Done
+I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9949
+I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320717048691
+I> add_serialno: Serial Num = 0320817138601
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2603/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320717048691 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:3b:4a
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:3b:4b
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:3b:4c
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
 I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-E
-I> Adding plugin-manager/configs/3310-mem-type 00
-I> Adding plugin-manager/configs/3310-power-config 00
-I> Adding plugin-manager/configs/3310-misc-config 00
-I> Adding plugin-manager/configs/3310-modem-config 00
-I> Adding plugin-manager/configs/3310-touch-config 00
-I> Adding plugin-manager/configs/3310-display-config 00
-E> "chip-id" doesn't exist, creating 
-I> Adding plugin-manager/chip-id/A02P
-I> Updated memory info to DTB
-E> "reset" doesn't exist, creating 
-E> "pmc-reset-reason" doesn't exist, creating 
-E> "pmic-reset-reason" doesn't exist, creating 
-I> disabled_core_mask: 0xffffff0c
-I> tegrabl_load_kernel_and_dtb: Done
-
-
-U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:46:37 -0700)
-
-TEGRA186
-Model: NVIDIA P2771-0000-500
-DRAM:  7.8 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2 [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> AddiŽ[0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -758,7 +729,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -785,33 +756,33 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265161) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9949
+I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320717048691
+I> add_serialno: Serial Num = 0320817138601
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2603/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320717048691 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:3b:4a
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:3b:4b
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:3b:4c
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
 I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
@@ -853,15 +824,15 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 74 ms (4.9 KiB/s)
+431 bytes read in 65 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265161 bytes read in 201 ms (29.7 MiB/s)
+6265227 bytes read in 209 ms (28.6 MiB/s)
 Retrieving file: /boot/Image
 17322496 bytes read in 461 ms (35.8 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2603/nfsroot,nolock,nfsvers=2 rootwait
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
 23528 bytes read in 57 ms (402.3 KiB/s)
 ## Flattened Device Tree blob at 82000000
@@ -984,47 +955,47 @@
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-10-15 00:08:26 UTC (1476490106)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 06:a1:ca:7f:76:d8
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
-dwmac4: Master AXI performs any burst length
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmc2: new high speed MMC card at address 0001
+max77686-rtc max77620-rtc: setting system clock to 2016-10-11 01:12:27 UTC (1476148347)
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address c2:b0:d8:de:6e:50
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
+dwmac4: Master AXI performs any burst length
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-WARNING: CPU: 4 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
+WARNING: CPU: 4 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 5 Comm: kworker/u12:0 Tainted: G S               4.15.0-rc8-next-20180118-26574-ga362f6d #1
+CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S               4.15.0-rc8-next-20180119-228575-g761914d #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-IP-Config: Complete:
 Workqueue: events_power_efficient phy_state_machine
-     device=eth0, hwaddr=06:a1:ca:7f:76:d8, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+IP-Config: Complete:
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
+sp : ffff000009f2bab0
+     device=eth0, hwaddr=c2:b0:d8:de:6e:50, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+x29: ffff000009f2bab0 x28: ffff8001f7808070 
+x27: ffff8001f7808020 x26: ffff000008fefd28 
      host=192.168.99.2, domain=, nis-domain=(none)
-sp : ffff000009d93ab0
-x29: ffff000009d93ab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 
-     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x26: ffff000008fefd28 
 x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4cd8878 x22: 0000000000000080 
-x21: ffff000009d93b58 x20: ffff000008fd9000 
-x19: ffff000009d93bd8 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 00000000ffffff80 x14: 00000000000c8000 
+x23: ffff8001f4e2c878 
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+x22: 0000000000000080 
+x21: ffff000009f2bb58 x20: ffff000008fd9000 
+x19: ffff000009f2bbd8 x18: 0000000000000000 
+x17: 00000000efb9c8d6 x16: 000000007922798e 
+x15: 00000000f81250ae x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000000 
-x9 : 00000000ffffffff x8 : ffff8001fff4f560 
-x7 : ffff00000bf50000 x6 : ffff000009d93b68 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff97560 
+x7 : ffff00000c980000 x6 : ffff000009f2bb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009d93bc0 x2 : 0000000000000080 
-x1 : ffff000009d93b68 x0 : ffff8001f65bfa18 
+x3 : ffff000009f2bbc0 x2 : 0000000000000080 
+x1 : ffff000009f2bb68 x0 : ffff8001f658fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1041,31 +1012,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 160007c1ea2093c9 ]---
-WARNING: CPU: 4 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace a72ece9fe88d6d53 ]---
+WARNING: CPU: 4 PID: 40 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 5 Comm: kworker/u12:0 Tainted: G S      W        4.15.0-rc8-next-20180118-26574-ga362f6d #1
+CPU: 4 PID: 40 Comm: kworker/u12:1 Tainted: G S      W        4.15.0-rc8-next-20180119-228575-g761914d #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009d93a40
-x29: ffff000009d93a40 x28: ffff8001f7808070 
+sp : ffff000009f2ba40
+x29: ffff000009f2ba40 x28: ffff8001f7808070 
 x27: ffff8001f7808020 x26: ffff000008fefd28 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009d93ae8 x20: ffff000008fd9000 
-x19: ffff000009d93b68 x18: 0000000000000007 
-x17: 000000000000000e x16: 0000000000000001 
-x15: 00000000ffffff80 x14: 00000000000c8000 
+x21: ffff000009f2bae8 x20: ffff000008fd9000 
+x19: ffff000009f2bb68 x18: 0000000000000000 
+x17: 00000000efb9c8d6 x16: 000000007922798e 
+x15: 00000000f81250ae x14: 00000000000c8000 
 x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000000 
-x9 : 00000000ffffffff x8 : ffff8001fff4f560 
-x7 : ffff00000bf50000 x6 : ffff000009d93af8 
+x11: ffffffffffffffff x10: 0000000000000003 
+x9 : 00000000ffffffff x8 : ffff8001fff97560 
+x7 : ffff00000c980000 x6 : ffff000009f2baf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009d93b50 x2 : 0000000000000080 
-x1 : ffff000009d93af8 x0 : ffff8001f65bfa18 
+x3 : ffff000009f2bb50 x2 : 0000000000000080 
+x1 : ffff000009f2baf8 x0 : ffff8001f658fa18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1082,7 +1053,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 160007c1ea2093ca ]---
+---[ end trace a72ece9fe88d6d54 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1093,7 +1064,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sat Oct 15 00:08:30 UTC 2016
+L4T-INITRD Build DATE: Tue Oct 11 01:12:32 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1105,104 +1076,104 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Created slice System Slice.
-Created slice System Slice.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
+systemd[1]: Listening on Journal Socket.
+Listening on Journal Socket.
 systemd[1]: Listening on Syslog Socket.
 Listening on Syslog Socket.
-systemd[1]: Listening on udev Control Socket.
-Listening on udev Control Socket.
-systemd[1]: Reached target Encrypted Volumes.
-Reached target Encrypted Volumes.
-systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
-Listening on /dev/initctl Compatibility Named Pipe.
-systemd[1]: Reached target Swap.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Dispatch Password Requests to Console Directory Watch.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Listening on Journal Socket (/dev/log).
+Listening on Journal Socket (/dev/log).
+systemd[1]: Created slice System Slice.
+Created slice System Slice.
+systemd[1]: Starting Load Kernel Modules...
+         Starting Load Kernel Modules...
+         Mounting Debug File System...
 Reached target Swap.
-Listening on udev Kernel Socket.
-Created slice system-serial\x2dgetty.slice.
-Created slice system-getty.slice.
 Created slice User and Session Slice.
-Reached target Slices.
+         Starting Journal Service...
+Created slice system-getty.slice.
+         Mounting Huge Pages File System...
 Started Forward Password Requests to Wall Directory Watch.
-Started Dispatch Password Requests to Console Directory Watch.
 Reached target Paths.
-Listening on Journal Socket (/dev/log).
-Listening on Journal Socket.
+         Starting Remount Root and Kernel File Systems...
+Reached target Encrypted Volumes.
          Mounting RPC Pipe File System...
-         Mounting Huge Pages File System...
-         Starting Load Kernel Modules...
+Listening on udev Control Socket.
+Listening on /dev/initctl Compatibility Named Pipe.
+Listening on udev Kernel Socket.
+Reached target Slices.
          Mounting POSIX Message Queue File System...
-         Mounting Debug File System...
-         Starting Remount Root and Kernel File Systems...
-         Starting Journal Service...
+Created slice system-serial\x2dgetty.slice.
          Starting Create Static Device Nodes in /dev...
+Mounted POSIX Message Queue File System.
 Mounted Huge Pages File System.
 Mounted Debug File System.
-Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
+Started Journal Service.
 Started Load Kernel Modules.
 Started Remount Root and Kernel File Systems.
-         Starting Load/Save Random Seed...
          Starting udev Coldplug all Devices...
-         Starting Apply Kernel Variables...
+         Starting Load/Save Random Seed...
          Mounting Configuration File System...
-Started Journal Service.
+         Starting Apply Kernel Variables...
          Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
+Started Create Static Device Nodes in /dev.
 Started Load/Save Random Seed.
-systemd-journald[1508]: Received request to flush runtime journal from PID 1
-Started Flush Journal to Persistent Storage.
 Started Apply Kernel Variables.
-Started udev Coldplug all Devices.
-Started Create Static Device Nodes in /dev.
-         Starting udev Kernel Device Manager...
+systemd-journald[1499]: Received request to flush runtime journal from PID 1
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
-         Starting Raise network interfaces...
          Starting Set console keymap...
-         Starting Create Volatile Files and Directories...
+         Starting Raise network interfaces...
          Starting Preprocess NFS configuration...
+         Starting udev Kernel Device Manager...
+Started Flush Journal to Persistent Storage.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
 Started Preprocess NFS configuration.
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
-Started Create Volatile Files and Directories.
+         Starting Create Volatile Files and Directories...
+Started udev Coldplug all Devices.
 Started udev Kernel Device Manager.
+Found device /dev/ttyS0.
+Started Create Volatile Files and Directories.
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
          Starting Update UTMP about System Boot/Shutdown...
 Reached target System Time Synchronized.
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Started Daily Cleanup of Temporary Directories.
 Listening on RPCbind Server Activation Socket.
+Started Daily apt activities.
 Listening on D-Bus System Message Bus Socket.
 Reached target Sockets.
 Reached target Basic System.
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
-         Starting Permit User Sessions...
+Started D-Bus System Message Bus.
+         Starting Login Service...
+         Starting OpenBSD Secure Shell server...
 Started Regular background program processing daemon.
+         Starting /etc/rc.local Compatibility...
+         Starting Permit User Sessions...
+         Starting LSB: Start NTP daemon...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
          Starting System Logging Service...
-Started Daily apt activities.
+Started Daily Cleanup of Temporary Directories.
 Reached target Timers.
-         Starting Login Service...
-Started D-Bus System Message Bus.
-Started System Logging Service.
-Started Permit User Sessions.
-Found device /dev/ttyS0.
-Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
-         Starting LSB: Start NTP daemon...
-         Starting /etc/rc.local Compatibility...
-         Starting OpenBSD Secure Shell server...
 Started /etc/rc.local Compatibility.
-Started Login Service.
+Started Permit User Sessions.
 Started Serial Getty on ttyS0.
 Started Getty on tty1.
 Reached target Login Prompts.
+Started Login Service.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started System Logging Service.
 Started LSB: Start NTP daemon.
 Started OpenBSD Secure Shell server.
 Reached target Multi-User System.
@@ -1391,7 +1362,7 @@
 I> Device at /i2c@3180000:0x54
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
@@ -1418,33 +1389,33 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265161) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6265227) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9949
+I> Ramdisk: Base: 0x98000000; Size: 0x5f998b
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320717048691
+I> add_serialno: Serial Num = 0320817138601
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2603/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320717048691 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817138601 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:3b:4a
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:3b:4b
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:3b:4c
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:5a:ed
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:5a:ee
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:5a:ef
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
 I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-500-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
 I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
 I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
@@ -1486,17 +1457,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 74 ms (4.9 KiB/s)
+431 bytes read in 65 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265161 bytes read in 201 ms (29.7 MiB/s)
+6265227 bytes read in 209 ms (28.6 MiB/s)
 Retrieving file: /boot/Image
-17322496 bytes read in 460 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2603/nfsroot,nolock,nfsvers=2 rootwait
+17322496 bytes read in 461 ms (35.8 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2297/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-23528 bytes read in 57 ms (402.3 KiB/s)
+23528 bytes read in 56 ms (410.2 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 0000000082008be7
@@ -1617,46 +1588,46 @@
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 VDD_HDMI_5V0: supplied by VDD_5V0_SYS
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
+max77686-rtc max77620-rtc: setting system clock to 2016-10-11 01:13:29 UTC (1476148409)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address f6:cd:d5:f2:fd:a0
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 mmc2: new high speed MMC card at address 0001
-max77686-rtc max77620-rtc: setting system clock to 2016-10-15 00:09:28 UTC (1476490168)
+dwmac4: Master AXI performs any burst length
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address fe:40:d2:84:73:ae
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
-dwmac4: Master AXI performs any burst length
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
-WARNING: CPU: 4 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+WARNING: CPU: 4 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 5 Comm: kworker/u12:0 Tainted: G S               4.15.0-rc8-next-20180118-26574-ga362f6d #1
+CPU: 4 PID: 51 Comm: kworker/u12:3 Tainted: G S               4.15.0-rc8-next-20180119-228575-g761914d #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
-Workqueue: events_power_efficient phy_state_machine
 IP-Config: Complete:
+Workqueue: events_power_efficient phy_state_machine
+     device=eth0, hwaddr=f6:cd:d5:f2:fd:a0, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009d93ab0
-     device=eth0, hwaddr=fe:40:d2:84:73:ae, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
-x29: ffff000009d93ab0 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fefd28 
      host=192.168.99.2, domain=, nis-domain=(none)
-x25: 0000000000000000 x24: 0000000000000001 
-x23: ffff8001f4e00878 x22: 0000000000000080 
+sp : ffff000009fbbab0
+x29: ffff000009fbbab0 x28: 0000000000000000 
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
-x21: ffff000009d93b58 x20: ffff000008fd9000 
-x19: ffff000009d93bd8 x18: 0000000000000000 
-x17: 00000000005d606c x16: 0000000051ad0132 
-x15: 0000000095cb9742 x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff97560 
-x7 : ffff00000bfd0000 x6 : ffff000009d93b68 
+x27: ffff000009f93ce8 x26: ffff000008fefd28 
+x25: 0000000000000000 x24: 0000000000000001 
+x23: ffff8001f5d8c878 x22: 0000000000000080 
+x21: ffff000009fbbb58 x20: ffff000008fd9000 
+x19: ffff000009fbbbd8 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000068 
+x11: ffff00000cdf3d88 x10: 0000000000000a00 
+x9 : ffff000009fbbb40 x8 : ffff8001f6b39860 
+x7 : ffff00000beb0000 x6 : ffff000009fbbb68 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009d93bc0 x2 : 0000000000000080 
-x1 : ffff000009d93b68 x0 : ffff8001f659dc18 
+x3 : ffff000009fbbbc0 x2 : 0000000000000080 
+x1 : ffff000009fbbb68 x0 : ffff8001f65abc18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1673,31 +1644,31 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 104e8b58a1ae63c3 ]---
-WARNING: CPU: 4 PID: 5 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
+---[ end trace 4450bb5af7e6af7f ]---
+WARNING: CPU: 4 PID: 51 at drivers/firmware/tegra/bpmp.c:360 tegra_bpmp_transfer+0x2dc/0x368
 Modules linked in:
-CPU: 4 PID: 5 Comm: kworker/u12:0 Tainted: G S      W        4.15.0-rc8-next-20180118-26574-ga362f6d #1
+CPU: 4 PID: 51 Comm: kworker/u12:3 Tainted: G S      W        4.15.0-rc8-next-20180119-228575-g761914d #1
 Hardware name: NVIDIA Tegra186 P2771-0000 Development Board (DT)
 Workqueue: events_power_efficient phy_state_machine
 pstate: 80000085 (Nzcv daIf -PAN -UAO)
 pc : tegra_bpmp_transfer+0x2dc/0x368
 lr : tegra_bpmp_clk_transfer+0x94/0xd0
-sp : ffff000009d93a40
-x29: ffff000009d93a40 x28: ffff8001f7808070 
-x27: ffff8001f7808020 x26: ffff000008fefd28 
+sp : ffff000009fbba40
+x29: ffff000009fbba40 x28: 0000000000000000 
+x27: ffff000009f93ce8 x26: ffff000008fefd28 
 x25: 0000000000000000 x24: 0000000000000001 
 x23: 00000000ffffffff x22: 0000000000000080 
-x21: ffff000009d93ae8 x20: ffff000008fd9000 
-x19: ffff000009d93b68 x18: 0000000000000000 
-x17: 00000000005d606c x16: 0000000051ad0132 
-x15: 0000000095cb9742 x14: 00000000000c8000 
-x13: 00000000000079df x12: 00000000000079df 
-x11: ffffffffffffffff x10: 0000000000000003 
-x9 : 00000000ffffffff x8 : ffff8001fff97560 
-x7 : ffff00000bfd0000 x6 : ffff000009d93af8 
+x21: ffff000009fbbae8 x20: ffff000008fd9000 
+x19: ffff000009fbbb68 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000068 
+x11: ffff00000cdf3d88 x10: 0000000000000a00 
+x9 : ffff000009fbbb40 x8 : ffff8001f6b39860 
+x7 : ffff00000beb0000 x6 : ffff000009fbbaf8 
 x5 : ffffffffffffffd0 x4 : 0000000000000010 
-x3 : ffff000009d93b50 x2 : 0000000000000080 
-x1 : ffff000009d93af8 x0 : ffff8001f659dc18 
+x3 : ffff000009fbbb50 x2 : 0000000000000080 
+x1 : ffff000009fbbaf8 x0 : ffff8001f65abc18 
 Call trace:
  tegra_bpmp_transfer+0x2dc/0x368
  tegra_bpmp_clk_transfer+0x94/0xd0
@@ -1714,7 +1685,7 @@
  worker_thread+0x13c/0x3f8
  kthread+0xfc/0x128
  ret_from_fork+0x10/0x18
----[ end trace 104e8b58a1ae63c4 ]---
+---[ end trace 4450bb5af7e6af80 ]---
 dwc-eth-dwmac 2490000.ethernet: failed to set TX rate: -22
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 VDD_RTC: disabling
@@ -1725,7 +1696,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sat Oct 15 00:09:32 UTC 2016
+L4T-INITRD Build DATE: Tue Oct 11 01:13:33 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1737,68 +1708,68 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Listening on Journal Socket.
+Listening on Journal Socket.
+systemd[1]: Reached target Swap.
+Reached target Swap.
 systemd[1]: Created slice User and Session Slice.
 Created slice User and Session Slice.
-systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
-Listening on /dev/initctl Compatibility Named Pipe.
-systemd[1]: Listening on udev Kernel Socket.
-Listening on udev Kernel Socket.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
 systemd[1]: Created slice System Slice.
 Created slice System Slice.
+systemd[1]: Created slice system-serial\x2dgetty.slice.
+Created slice system-serial\x2dgetty.slice.
+systemd[1]: Created slice system-getty.slice.
+Created slice system-getty.slice.
 systemd[1]: Reached target Slices.
 Reached target Slices.
-systemd[1]: Listening on udev Control Socket.
-Listening on udev Control Socket.
-Created slice system-getty.slice.
-Reached target Encrypted Volumes.
-Listening on Journal Socket.
          Mounting Huge Pages File System...
          Mounting RPC Pipe File System...
-         Mounting Debug File System...
-         Starting Load Kernel Modules...
-Created slice system-serial\x2dgetty.slice.
-Started Dispatch Password Requests to Console Directory Watch.
-Started Forward Password Requests to Wall Directory Watch.
-Reached target Paths.
          Starting Create Static Device Nodes in /dev...
-         Starting Remount Root and Kernel File Systems...
+Listening on Journal Socket (/dev/log).
+Started Dispatch Password Requests to Console Directory Watch.
+Listening on udev Kernel Socket.
          Mounting POSIX Message Queue File System...
+         Mounting Debug File System...
+Listening on udev Control Socket.
+         Starting Remount Root and Kernel File Systems...
+Listening on /dev/initctl Compatibility Named Pipe.
+Listening on Journal Audit Socket.
 Listening on Syslog Socket.
-Listening on Journal Socket (/dev/log).
          Starting Journal Service...
-Reached target Swap.
+Started Forward Password Requests to Wall Directory Watch.
+Reached target Paths.
+         Starting Load Kernel Modules...
+Reached target Encrypted Volumes.
+Mounted POSIX Message Queue File System.
 Mounted Huge Pages File System.
 Mounted Debug File System.
-Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
-Started Load Kernel Modules.
+Started Journal Service.
 Started Create Static Device Nodes in /dev.
 Started Remount Root and Kernel File Systems.
-Started Journal Service.
-         Starting Load/Save Random Seed...
-         Starting Flush Journal to Persistent Storage...
+Started Load Kernel Modules.
+         Starting Apply Kernel Variables...
+         Mounting Configuration File System...
          Starting udev Coldplug all Devices...
+         Starting Load/Save Random Seed...
          Starting udev Kernel Device Manager...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
-         Starting Preprocess NFS configuration...
          Starting Set console keymap...
-         Mounting Configuration File System...
-         Starting Apply Kernel Variables...
+         Starting Preprocess NFS configuration...
+         Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
+Started Apply Kernel Variables.
 Started Load/Save Random Seed.
-Started Preprocess NFS configuration.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-Started Apply Kernel Variables.
+Started Preprocess NFS configuration.
 Started udev Kernel Device Manager.
-systemd-journald[1509]: Received request to flush runtime journal from PID 1
-         Starting Raise network interfaces...
+systemd-journald[1508]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
+         Starting Raise network interfaces...
 Started Flush Journal to Persistent Storage.
 Started udev Coldplug all Devices.
 Found device /dev/ttyS0.
@@ -1807,31 +1778,31 @@
 Reached target Network is Online.
          Starting Create Volatile Files and Directories...
 Started Create Volatile Files and Directories.
-         Starting Update UTMP about System Boot/Shutdown...
 Reached target System Time Synchronized.
+         Starting Update UTMP about System Boot/Shutdown...
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
+Listening on D-Bus System Message Bus Socket.
 Started Daily Cleanup of Temporary Directories.
 Listening on RPCbind Server Activation Socket.
+Reached target Sockets.
 Started Daily apt activities.
 Reached target Timers.
-Listening on D-Bus System Message Bus Socket.
-Reached target Sockets.
 Reached target Basic System.
-         Starting LSB: Start NTP daemon...
-         Starting OpenBSD Secure Shell server...
-         Starting /etc/rc.local Compatibility...
-         Starting Permit User Sessions...
 Started Regular background program processing daemon.
-         Starting System Logging Service...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting OpenBSD Secure Shell server...
 Started D-Bus System Message Bus.
          Starting Login Service...
-Started System Logging Service.
-Started /etc/rc.local Compatibility.
+         Starting System Logging Service...
+         Starting Permit User Sessions...
+         Starting /etc/rc.local Compatibility...
+         Starting LSB: Start NTP daemon...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
 Started Permit User Sessions.
-Started Serial Getty on ttyS0.
+Started /etc/rc.local Compatibility.
+Started System Logging Service.
 Started Getty on tty1.
+Started Serial Getty on ttyS0.
 Reached target Login Prompts.
 Started OpenBSD Secure Shell server.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.820628637 -0800
+++ /tmp/foob	2018-01-23 10:36:11.820628637 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 3.7 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -57,7 +57,7 @@
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Jan 19 08:22:20 PST 2018
+Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -270,7 +270,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x62618fd7, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xe6e3457f, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -348,8 +348,8 @@
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
  mmcblk1: p1 p2
+hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.876628895 -0800
+++ /tmp/foob	2018-01-23 10:36:11.876628895 -0800
@@ -48,7 +48,7 @@
 	 ##################################
 	 4.1 MiB/s
 done
-Bytes transferred = 6213712 (5ed050 hex)
+Bytes transferred = 6214528 (5ed380 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ed050 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ed380 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-26574-ga362f6d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:21:56 PST 2018
+Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xde3a0d23, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xbd7913aa, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -351,8 +351,8 @@
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 ALSA device list:
   #0: tegra-trimslice
-cfg80211: failed to load regulatory.db
 Waiting for root device PARTUUID=11eb23c1-01...
+cfg80211: failed to load regulatory.db
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-23 10:36:11.976629354 -0800
+++ /tmp/foob	2018-01-23 10:36:11.976629354 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 737525 us
-Basic modules init took 348448 us
+Tegraboot started after 732662 us
+Basic modules init took 351134 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14362 us
-Carveout took 252670 us
-CPU initialization took 92441 us
-Total time taken by TegraBoot 707921 us
+Next stage binary read took 14365 us
+Carveout took 252696 us
+CPU initialization took 92458 us
+Total time taken by TegraBoot 710653 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.576] LPDDR4 Training: Number of tables = 10
+64b[0001.574] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17453568 bytes read in 882 ms (18.9 MiB/s)
+17453568 bytes read in 876 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44914 bytes read in 453 ms (96.7 KiB/s)
+44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180118-228282-ga362f6d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Fri Jan 19 08:26:02 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:44:48 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981680K/3131392K available (9852K kernel code, 1236K rwdata, 4728K rodata, 1152K init, 404K bss, 133328K reserved, 16384K cma-reserved)
+Memory: 2981680K/3131392K available (9852K kernel code, 1236K rwdata, 4732K rodata, 1152K init, 404K bss, 133328K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000073bd4769, 1 data @ 00000000cbe7eb46)
+vdso: 2 pages (1 code @ 00000000eea5893d, 1 data @ 0000000004050515)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:12.120630016 -0800
+++ /tmp/foob	2018-01-23 10:36:12.124630035 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 767549 us
-Basic modules init took 349063 us
+Tegraboot started after 758757 us
+Basic modules init took 348316 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14367 us
-Carveout took 252756 us
-CPU initialization took 92440 us
-Total time taken by TegraBoot 708626 us
+Next stage binary read took 14392 us
+Carveout took 252834 us
+CPU initialization took 92454 us
+Total time taken by TegraBoot 707996 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.606] LPDDR4 Training: Number of tables = 10
+64b[0001.597] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17189376 bytes read in 852 ms (19.2 MiB/s)
+17191424 bytes read in 855 ms (19.2 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Fri Jan 19 08:28:24 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981940K/3131392K available (9788K kernel code, 1234K rwdata, 4592K rodata, 1152K init, 402K bss, 133068K reserved, 16384K cma-reserved)
+Memory: 2981936K/3131392K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 133072K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -213,7 +213,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749581
+Built 1 zonelists, mobility grouping on.  Total pages: 749580
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -223,7 +223,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000009839e346, 1 data @ 000000005b8c4fdc)
+vdso: 2 pages (1 code @ 0000000032127f91, 1 data @ 00000000d35088fd)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:12.392631267 -0800
+++ /tmp/foob	2018-01-23 10:36:12.392631267 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Fri Jan 19 08:28:24 PST 2018
+Linux version 4.15.0-rc8-next-20180119-228575-g761914d (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Jan 23 09:53:22 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -30,7 +30,7 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835084K/2988032K available (9788K kernel code, 1234K rwdata, 4592K rodata, 1152K init, 402K bss, 136564K reserved, 16384K cma-reserved)
+Memory: 2835084K/2988032K available (9788K kernel code, 1236K rwdata, 4596K rodata, 1152K init, 404K bss, 136564K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -99,7 +99,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000003a73e0c1, 1 data @ 0000000088a9c791)
+vdso: 2 pages (1 code @ 00000000af0e11ef, 1 data @ 00000000a927d6e9)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -140,7 +140,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 3412K
+Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
 kvm [1]: IDMAP page: 809fd000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
@@ -254,11 +254,9 @@
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2001-11-03 23:19:53 UTC (1004829593)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
-max77686-rtc max77620-rtc: setting system clock to 2001-10-30 21:58:05 UTC (1004479085)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 PP1200_AVDD: disabling
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
 PP2800L_FCAM: disabling
@@ -268,7 +266,9 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
+[p3 p4 p5 p6 p7 p8 p9 p10 p11
 Freeing unused kernel memory: 1152K
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:12.600632224 -0800
+++ /tmp/foob	2018-01-23 10:36:12.600632224 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##################################
-	 2.8 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 8118784 (7be200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.6 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-346523-ga362f6d2cdbd (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Jan 19 08:22:20 PST 2018
+Linux version 4.15.0-rc8-next-20180119-346816-g761914dd2975 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jan 23 09:41:20 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -318,18 +318,18 @@
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-mmc1: new high speed MMC card at address 0001
 tegra-pcie 3000.pcie: 2x3 configuration
-mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 tegra-pcie 3000.pcie: probing port 0, using 2 lanes
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+mmc1: new high speed MMC card at address 0001
+mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (236:0)
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
-tegra-pcie 3000.pcie: probing port 2, using 2 lanes
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
@@ -376,7 +376,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x276e1482, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x8f69a6c2, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -402,10 +402,10 @@
 EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk1p1): recovery complete
 EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.083646] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.093624] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-23 10:36:12.688632629 -0800
+++ /tmp/foob	2018-01-23 10:36:12.688632629 -0800
@@ -40,18 +40,18 @@
 	 ##################################
 	 2.9 MiB/s
 done
-Bytes transferred = 6213712 (5ed050 hex)
+Bytes transferred = 6214528 (5ed380 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.6 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ed050 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ed380 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-next-20180118-26574-ga362f6d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:21:56 PST 2018
+Linux version 4.15.0-rc8-next-20180119-26867-g761914d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 23 09:32:06 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x5659ff31, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xb89ecad9, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.378642] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.378635] usb 2-1: new high-speed USB device number 2 using tegra-ehci
