U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6376664 (614cd8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x614cd8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc8-next-20180118-228282-ga362f6d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Fri Jan 19 08:22:03 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 782K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 783 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008018] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017551] Switching to timer-based delay loop, resolution 1000ns [ 0.024065] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029771] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040518] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048489] Switching to timer-based delay loop, resolution 83ns [ 0.054663] Console: colour dummy device 80x30 [ 0.058897] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069208] pid_max: default: 32768 minimum: 301 [ 0.073975] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080389] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087722] CPU: Testing write buffer coherency: ok [ 0.092403] /cpus/cpu@0 missing clock-frequency property [ 0.097552] /cpus/cpu@1 missing clock-frequency property [ 0.102848] /cpus/cpu@2 missing clock-frequency property [ 0.108126] /cpus/cpu@3 missing clock-frequency property [ 0.113408] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153452] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158107] Hierarchical SRCU implementation. [ 0.173668] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193456] smp: Bringing up secondary CPUs ... [ 0.243758] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323786] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403826] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413603] smp: Brought up 1 node, 4 CPUs [ 0.432686] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438839] CPU: All CPU(s) started in SVC mode. [ 0.444126] devtmpfs: initialized [ 0.453417] Built 1 zonelists, mobility grouping on. Total pages: 516005 [ 0.458462] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475706] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.481984] pinctrl core: initialized pinctrl subsystem [ 0.487518] NET: Registered protocol family 16 [ 0.491928] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498832] cpuidle: using governor menu [ 0.509728] No ATAGs? [ 0.509787] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518131] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524823] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532492] iommu: Adding device 50000000.host1x to group 0 [ 0.537904] iommu: Adding device 54200000.dc to group 1 [ 0.543105] iommu: Adding device 54240000.dc to group 1 [ 0.548304] iommu: Adding device 57000000.gpu to group 2 [ 0.559398] +5V_SYS: supplied by +VDD_MUX [ 0.561625] +3.3V_SYS: supplied by +VDD_MUX [ 0.565948] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571284] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579388] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585324] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593438] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599191] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607321] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613057] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621230] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628051] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636247] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642090] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650685] vgaarb: loaded [ 0.653188] SCSI subsystem initialized [ 0.656743] libata version 3.00 loaded. [ 0.660598] usbcore: registered new interface driver usbfs [ 0.665945] usbcore: registered new interface driver hub [ 0.671254] usbcore: registered new device driver usb [ 0.677464] Linux video capture interface: v2.00 [ 0.680855] pps_core: LinuxPPS API ver. 1 registered [ 0.685779] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694882] PTP clock support registered [ 0.698920] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706142] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712311] Advanced Linux Sound Architecture Driver Initialized. [ 0.718518] Bluetooth: Core ver 2.22 [ 0.721841] NET: Registered protocol family 31 [ 0.726250] Bluetooth: HCI device and connection manager initialized [ 0.732573] Bluetooth: HCI socket layer initialized [ 0.737430] Bluetooth: L2CAP socket layer initialized [ 0.742465] Bluetooth: SCO socket layer initialized [ 0.747548] clocksource: Switched to clocksource arch_sys_counter [ 0.785402] NET: Registered protocol family 2 [ 0.788218] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795490] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802535] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.808968] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815406] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821143] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827580] NET: Registered protocol family 1 [ 0.832059] RPC: Registered named UNIX socket transport module. [ 0.837685] RPC: Registered udp transport module. [ 0.842355] RPC: Registered tcp transport module. [ 0.847035] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.863701] PCI: CLS 0 bytes, default 64 [ 0.866404] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.874507] Initialise system trusted keyrings [ 0.878355] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.885170] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.890821] NFS: Registering the id_resolver key type [ 0.895524] Key type id_resolver registered [ 0.899689] Key type id_legacy registered [ 0.905453] Key type asymmetric registered [ 0.907747] Asymmetric key parser 'x509' registered [ 0.912641] bounce: pool size: 64 pages [ 0.916431] io scheduler noop registered (default) [ 0.921179] io scheduler mq-deadline registered [ 0.925677] io scheduler kyber registered [ 0.930316] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.942682] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.948775] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.957583] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.964342] console [ttyS0] disabled [ 0.967240] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.976174] console [ttyS0] enabled [ 0.976174] console [ttyS0] enabled [ 0.982400] bootconsole [earlycon0] disabled [ 0.982400] bootconsole [earlycon0] disabled [ 1.008537] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.015013] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.022519] panel-simple panel: panel supply power not found, using dummy regulator [ 1.033911] loop: module loaded [ 1.037635] as3722 4-0040: AS3722 with revision 0x1 found [ 1.047689] as3722-sd2: supplied by +5V_SYS [ 1.052111] as3722-sd3: supplied by +5V_SYS [ 1.056448] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.062637] as3722-sd4: supplied by +5V_SYS [ 1.066973] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.072731] as3722-sd5: supplied by +5V_SYS [ 1.078335] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.084087] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.090112] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.095740] as3722-ldo3: supplied by +3.3V_SYS [ 1.100200] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.107781] as3722-ldo4: supplied by +3.3V_SYS [ 1.112377] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.118405] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.123177] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.129875] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.135909] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.140693] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.147245] as3722-ldo9: supplied by +5V_SYS [ 1.151826] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.158033] as3722-ldo10: supplied by +5V_SYS [ 1.162545] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.169000] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.191266] cros-ec-spi spi0.0: Chrome EC device registered [ 1.205988] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.211505] libphy: Fixed MDIO Bus: probed [ 1.215591] CAN device driver interface [ 1.219442] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.226387] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.232001] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.239435] usbcore: registered new interface driver pegasus [ 1.245102] usbcore: registered new interface driver asix [ 1.250510] usbcore: registered new interface driver ax88179_178a [ 1.256606] usbcore: registered new interface driver cdc_ether [ 1.262459] usbcore: registered new interface driver smsc75xx [ 1.268222] usbcore: registered new interface driver smsc95xx [ 1.273969] usbcore: registered new interface driver net1080 [ 1.279637] usbcore: registered new interface driver cdc_subset [ 1.285558] usbcore: registered new interface driver zaurus [ 1.291149] usbcore: registered new interface driver cdc_ncm [ 1.296885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.303403] ehci-pci: EHCI PCI platform driver [ 1.307863] tegra-ehci: Tegra EHCI driver [ 1.312131] usbcore: registered new interface driver cdc_acm [ 1.317781] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.325784] usbcore: registered new interface driver cdc_wdm [ 1.331459] usbcore: registered new interface driver usb-storage [ 1.338125] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.357638] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.364496] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.371264] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.378409] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.384689] i2c /dev entries driver [ 1.388612] usbcore: registered new interface driver uvcvideo [ 1.394342] USB Video Class driver (1.1.1) [ 1.398434] gspca_main: v2.14.0 registered [ 1.402756] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.411416] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.419769] sdhci: Secure Digital Host Controller Interface driver [ 1.425933] sdhci: Copyright(c) Pierre Ossman [ 1.430289] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436060] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.449862] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.454733] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475683] mmc0: Unknown controller version (3). You may experience problems. [ 1.482923] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519701] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527414] usbcore: registered new interface driver usbhid [ 1.533096] usbhid: USB HID core driver [ 1.539194] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587460] mmc0: new high speed MMC card at address 0001 [ 1.593377] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594801] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.604159] max98090 0-0010: use default 2.8v micbias [ 1.604366] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.616980] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.623024] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.623196] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.637928] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.639809] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.645906] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.659882] NET: Registered protocol family 10 [ 1.664904] Segment Routing with IPv6 [ 1.668631] mip6: Mobile IPv6 [ 1.671590] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678037] NET: Registered protocol family 17 [ 1.682474] NET: Registered protocol family 15 [ 1.686906] can: controller area network core (rev 20170425 abi 9) [ 1.693158] NET: Registered protocol family 29 [ 1.697598] can: raw protocol (rev 20170425) [ 1.701855] can: broadcast manager protocol (rev 20170425 t) [ 1.707502] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713051] Bluetooth: RFCOMM socket layer initialized [ 1.718196] Bluetooth: RFCOMM ver 1.11 [ 1.721938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727239] Bluetooth: BNEP socket layer initialized [ 1.732195] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738107] Bluetooth: HIDP socket layer initialized [ 1.743148] Key type dns_resolver registered [ 1.747611] Registering SWP/SWPB emulation handler [ 1.752643] Loading compiled-in X.509 certificates [ 1.764388] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769325] +VDD_LED: supplied by +VDD_MUX [ 1.773522] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779255] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.783964] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.788704] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.793882] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.798611] +5V_USB_HS: supplied by +5V_SYS [ 1.802931] +5V_USB_SS: supplied by +5V_SYS [ 1.808041] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.813236] +3.3V_LP0: supplied by +3.3V_SYS [ 1.818325] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.824139] +5V_HDMI_CON: supplied by +5V_SYS [ 1.829121] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.835853] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.848674] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.854875] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928281] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935677] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941113] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950632] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959259] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965629] hub 1-0:1.0: USB hub found [ 1.969454] hub 1-0:1.0: 6 ports detected [ 1.973826] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979229] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.986895] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995382] hub 2-0:1.0: USB hub found [ 1.999194] hub 2-0:1.0: 2 ports detected [ 2.004221] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017774] mmc1: Unknown controller version (3). You may experience problems. [ 2.025021] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031501] mmc1: Switching to 3.3V signalling voltage failed [ 2.060293] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.067930] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.072801] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083042] mmc2: Unknown controller version (3). You may experience problems. [ 2.090378] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.125054] mmc1: new high speed SDIO card at address 0001 [ 2.130858] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.138463] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.144629] panel-simple panel: panel supply power not found, using dummy regulator [ 2.152767] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.159391] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.165617] panel-simple panel: panel supply power not found, using dummy regulator [ 2.173577] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 05:56:33 UTC (946706193) [ 2.182338] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193897] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200624] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.202055] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.209270] cfg80211: failed to load regulatory.db [ 2.213837] +1.8V_RUN_CAM: disabling [ 2.222460] +1.2V_RUN_CAM_FRONT: disabling [ 2.226768] +1.05V_RUN_CAM_REAR: disabling [ 2.231179] +2.8V_RUN_TOUCH: disabling [ 2.235203] +2.8V_RUN_CAM_AF: disabling [ 2.239330] +1.8V_RUN_VPP_FUSE: disabling [ 2.243517] +VDD_LED: disabling [ 2.246651] +5V_VDD_TS_SW: disabling [ 2.250292] +3.3V_PANEL: disabling [ 2.253734] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.258311] +5V_HDMI_CON: disabling [ 2.261800] ALSA device list: [ 2.264762] #1: GoogleNyanBig [ 2.298127] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.304405] panel-simple panel: panel supply power not found, using dummy regulator [ 2.312413] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.322735] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.347580] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.364199] mmc2: new high speed SDHC card at address 0007 [ 2.371561] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.385270] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.391479] GPT:3014591 != 15564799 [ 2.394958] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.402341] GPT:3014591 != 15564799 [ 2.405817] GPT: Use GNU Parted to correct GPT errors. [ 2.410999] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.418082] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.424252] panel-simple panel: panel supply power not found, using dummy regulator [ 2.462476] EXT4-fs (mmcblk0p3): recovery complete [ 2.467990] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.476101] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.482743] devtmpfs: mounted [ 2.486154] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.596288] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.601646] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.606953] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.612314] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.617659] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.622988] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.628347] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.633675] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.639008] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.644311] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.723729] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.738551] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.748036] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.754193] panel-simple panel: panel supply power not found, using dummy regulator [ 3.097640] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.772274] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.783306] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.789557] panel-simple panel: panel supply power not found, using dummy regulator [ 4.127640] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.315685] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.332231] scsi host0: usb-storage 1-1:1.0 [ 4.336838] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.343030] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399373] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408122] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414332] panel-simple panel: panel supply power not found, using dummy regulator [ 5.605537] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.614186] sd 0:0:0:0: [sda] Write Protect is off [ 5.619014] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 rtcwake -d rtc1 -m mem -s 3 [ 5.625533] sd 0:0:0:0: [sda] No Caching mode page found [ 5.631994] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:2[ 5.660644] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 8 1970 [ 5.676102] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.682025] PM: suspend entry (deep) [ 5.685591] PM: Syncing filesystems ... done. [ 5.691625] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.699777] OOM killer disabled. [ 5.702997] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.711625] Suspending console(s) (use no_console_suspend to debug) [ 5.901391] Disabling non-boot CPUs ... [ 5.957745] IRQ17 no longer affine to CPU1 [ 6.078393] Entering suspend state LP1 [ 6.078419] Enabling non-boot CPUs ... [ 6.079188] CPU1 is up [ 6.079821] CPU2 is up [ 6.080512] CPU3 is up [ 6.121350] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.133329] mmc1: Switching to 3.3V signalling voltage failed [ 7.178307] tegra-sor 54540000.sor: failed to probe output: -517 [ 7.178477] panel-simple panel: panel supply power not found, using dummy regulator [ 7.226020] OOM killer enabled. [ 7.229186] Restarting tasks ... done. [ 7.233789] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.927365] PM: suspend entry (deep) [ 7.930953] PM: Syncing filesystems ... done. [ 7.936509] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.944685] OOM killer disabled. [ 7.947922] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.956512] Suspending console(s) (use no_console_suspend to debug) [ 8.141694] Disabling non-boot CPUs ... [ 8.317679] IRQ17 no longer affine to CPU3 [ 8.318225] Entering suspend state LP1 [ 8.318250] Enabling non-boot CPUs ... [ 8.319052] CPU1 is up [ 8.319712] CPU2 is up [ 8.320427] CPU3 is up [ 8.361621] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.373469] mmc1: Switching to 3.3V signalling voltage failed [ 8.902519] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.902688] panel-simple panel: panel supply power not found, using dummy regulator [ 8.950187] OOM killer enabled. [ 8.953317] Restarting tasks ... done. [ 8.957577] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 10.167226] PM: suspend entry (deep) [ 10.170816] PM: Syncing filesystems ... done. [ 10.176375] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.184538] OOM killer disabled. [ 10.187763] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.196353] Suspending console(s) (use no_console_suspend to debug) [ 10.381167] Disabling non-boot CPUs ... [ 10.567651] IRQ17 no longer affine to CPU3 [ 10.568199] Entering suspend state LP1 [ 10.568225] Enabling non-boot CPUs ... [ 10.569033] CPU1 is up [ 10.569694] CPU2 is up [ 10.570407] CPU3 is up [ 10.611517] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.623563] mmc1: Switching to 3.3V signalling voltage failed [ 11.150483] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.150653] panel-simple panel: panel supply power not found, using dummy regulator [ 11.198230] OOM killer enabled. [ 11.201372] Restarting tasks ... done. [ 11.205612] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.416845] PM: suspend entry (deep) [ 12.420443] PM: Syncing filesystems ... done. [ 12.426134] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.434328] OOM killer disabled. [ 12.437549] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.446140] Suspending console(s) (use no_console_suspend to debug) [ 12.630750] Disabling non-boot CPUs ... [ 12.787630] IRQ17 no longer affine to CPU3 [ 12.788184] Entering suspend state LP1 [ 12.788210] Enabling non-boot CPUs ... [ 12.789019] CPU1 is up [ 12.789679] CPU2 is up [ 12.790394] CPU3 is up [ 12.831495] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.843692] mmc1: Switching to 3.3V signalling voltage failed [ 13.057927] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.372861] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.373028] panel-simple panel: panel supply power not found, using dummy regulator [ 13.427411] OOM killer enabled. [ 13.430546] Restarting tasks ... done. [ 13.434793] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.637221] PM: suspend entry (deep) [ 14.640811] PM: Syncing filesystems ... done. [ 14.646282] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.654472] OOM killer disabled. [ 14.657698] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.666288] Suspending console(s) (use no_console_suspend to debug) [ 14.851213] Disabling non-boot CPUs ... [ 14.998141] Entering suspend state LP1 [ 14.998167] Enabling non-boot CPUs ... [ 14.998977] CPU1 is up [ 14.999636] CPU2 is up [ 15.000348] CPU3 is up [ 15.041472] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.053398] mmc1: Switching to 3.3V signalling voltage failed [ 15.267948] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.583633] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.583800] panel-simple panel: panel supply power not found, using dummy regulator [ 15.634136] OOM killer enabled. [ 15.637277] Restarting tasks ... done. [ 15.641668] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.846664] PM: suspend entry (deep) [ 16.850251] PM: Syncing filesystems ... done. [ 16.855911] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.864106] OOM killer disabled. [ 16.867323] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.875914] Suspending console(s) (use no_console_suspend to debug) [ 17.061259] Disabling non-boot CPUs ... [ 17.218096] Entering suspend state LP1 [ 17.218122] Enabling non-boot CPUs ... [ 17.218932] CPU1 is up [ 17.219591] CPU2 is up [ 17.220305] CPU3 is up [ 17.261605] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.273791] mmc1: Switching to 3.3V signalling voltage failed [ 17.487924] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.802750] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.802919] panel-simple panel: panel supply power not found, using dummy regulator [ 17.853273] OOM killer enabled. [ 17.856414] Restarting tasks ... done. [ 17.860683] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 19.067081] PM: suspend entry (deep) [ 19.070672] PM: Syncing filesystems ... done. [ 19.076391] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.084566] OOM killer disabled. [ 19.087804] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.096398] Suspending console(s) (use no_console_suspend to debug) [ 19.281068] Disabling non-boot CPUs ... [ 19.437555] IRQ17 no longer affine to CPU3 [ 19.438086] Entering suspend state LP1 [ 19.438112] Enabling non-boot CPUs ... [ 19.438923] CPU1 is up [ 19.439567] CPU2 is up [ 19.440284] CPU3 is up [ 19.481573] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.493870] mmc1: Switching to 3.3V signalling voltage failed [ 20.020468] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.020636] panel-simple panel: panel supply power not found, using dummy regulator [ 20.068205] OOM killer enabled. [ 20.071347] Restarting tasks ... done. [ 20.075602] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 21.287312] PM: suspend entry (deep) [ 21.290911] PM: Syncing filesystems ... done. [ 21.296606] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.304780] OOM killer disabled. [ 21.308016] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.316608] Suspending console(s) (use no_console_suspend to debug) [ 21.501602] Disabling non-boot CPUs ... [ 21.648045] Entering suspend state LP1 [ 21.648070] Enabling non-boot CPUs ... [ 21.648881] CPU1 is up [ 21.649538] CPU2 is up [ 21.650248] CPU3 is up [ 21.691747] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.703587] mmc1: Switching to 3.3V signalling voltage failed [ 22.233352] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.233521] panel-simple panel: panel supply power not found, using dummy regulator [ 22.276938] OOM killer enabled. [ 22.280100] Restarting tasks ... done. [ 22.284578] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 23.506725] PM: suspend entry (deep) [ 23.510323] PM: Syncing filesystems ... done. [ 23.516016] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.524210] OOM killer disabled. [ 23.527431] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.536022] Suspending console(s) (use no_console_suspend to debug) [ 23.720629] Disabling non-boot CPUs ... [ 23.888019] Entering suspend state LP1 [ 23.888044] Enabling non-boot CPUs ... [ 23.888855] CPU1 is up [ 23.889521] CPU2 is up [ 23.890238] CPU3 is up [ 23.931446] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.943337] mmc1: Switching to 3.3V signalling voltage failed [ 24.471440] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.471609] panel-simple panel: panel supply power not found, using dummy regulator [ 24.514992] OOM killer enabled. [ 24.518133] Restarting tasks ... done. [ 24.522346] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 25.747076] PM: suspend entry (deep) [ 25.750668] PM: Syncing filesystems ... done. [ 25.756310] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.764397] OOM killer disabled. [ 25.767630] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.776207] Suspending console(s) (use no_console_suspend to debug) [ 25.961027] Disabling non-boot CPUs ... [ 26.138059] Entering suspend state LP1 [ 26.138085] Enabling non-boot CPUs ... [ 26.138896] CPU1 is up [ 26.139555] CPU2 is up [ 26.140267] CPU3 is up [ 26.181729] cros-ec-spi spi0.0: spi transfer failed: -121 [ 26.193539] mmc1: Switching to 3.3V signalling voltage failed [ 26.720809] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.720978] panel-simple panel: panel supply power not found, using dummy regulator [ 26.764412] OOM killer enabled. [ 26.767574] Restarting tasks ... done. [ 26.771951] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE