Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.135731886 -0800
+++ /tmp/foob	2018-01-14 22:02:46.139731905 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 21:54:12 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -20,7 +20,7 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: Trusted OS migration not required
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+percpu: Embedded 23 pages/cpu @        (ptrval) s56832 r8192 d29184 u94208
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -80,9 +80,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000007c2494b, 1 data @ 00000000a5ff44e3)
+vdso: 2 pages (1 code @ 00000000b262531d, 1 data @ 00000000db028ab6)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -188,8 +188,9 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-12 06:02:39 UTC (1515736959)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-15 06:01:07 UTC (1515996067)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
 Waiting for root device /dev/vda2...
+script "/home/jonathanh/workdir/tegra/epmt/test/testscripts/qemu-vexpress64_defc
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.151731960 -0800
+++ /tmp/foob	2018-01-14 22:02:46.155731980 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ################################
-	 3 MiB/s
+	 #################################
+	 2.9 MiB/s
 done
-Bytes transferred = 8102400 (7ba200 hex)
+Bytes transferred = 8106496 (7bb200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 308.6 KiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7ba200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bb200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 21:48:11 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -322,19 +322,19 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- mmcblk0: p1 p2 p3
+[drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-[drm] No driver support for vblank timestamp query.
+ mmcblk0: p1 p2 p3
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
@@ -355,7 +355,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-04 12:54:18 UTC (960123258)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-07 12:52:19 UTC (960382339)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -367,4 +367,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.759427] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.749219] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.171732054 -0800
+++ /tmp/foob	2018-01-14 22:02:46.171732054 -0800
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 2.9 MiB/s
+	 ##################################
+	 2.8 MiB/s
 done
-Bytes transferred = 6208968 (5ebdc8 hex)
+Bytes transferred = 6210600 (5ec428 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.3 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ebdc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ec428 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:09 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-04 12:51:47 UTC (960123107)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-07 12:49:38 UTC (960382178)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,4 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.376760] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.355683] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.195732166 -0800
+++ /tmp/foob	2018-01-14 22:02:46.195732166 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -34,21 +34,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ################################
+	 #################################
 	 3.9 MiB/s
 done
-Bytes transferred = 8102400 (7ba200 hex)
+Bytes transferred = 8106496 (7bb200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
-Loading: *T ######
-	 12.7 KiB/s
+Loading: *#####
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7ba200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bb200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 21:48:11 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -400,8 +400,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
 PCI: bus0: Fast back to back transfers disabled
@@ -445,7 +445,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xbd7fb557, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9dd83e98, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -457,7 +457,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:16 UTC (946685056)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:02 UTC (946684922)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.211732241 -0800
+++ /tmp/foob	2018-01-14 22:02:46.215732260 -0800
@@ -32,21 +32,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 3.9 MiB/s
+	 ##################################
+	 945.3 KiB/s
 done
-Bytes transferred = 6208968 (5ebdc8 hex)
+Bytes transferred = 6210600 (5ec428 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 927.7 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ebdc8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ec428 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x7a74b42d, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xfa3eb118, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -450,7 +450,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:18 UTC (946684818)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.235732353 -0800
+++ /tmp/foob	2018-01-14 22:02:46.239732372 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 6373968 (614250 hex)
+Bytes transferred = 6376408 (614bd8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x614250 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x614bd8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:49:09 PST 2018
+Linux version 4.15.0-rc7-next-20180115-227384-gb625c1f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:30 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -382,8 +382,8 @@
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
-tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
@@ -421,7 +421,6 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -446,22 +445,19 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xc83ef849, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x4777d966, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
+[drm] Cannot find any crtc or sizes
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:57 UTC (946684917)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -473,13 +469,18 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 cfg80211: failed to load regulatory.db
+ mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.259732466 -0800
+++ /tmp/foob	2018-01-14 22:02:46.263732484 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,10 +42,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ################################
-	 3.3 MiB/s
+	 #################################
+	 3.2 MiB/s
 done
-Bytes transferred = 8102400 (7ba200 hex)
+Bytes transferred = 8106496 (7bb200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7ba200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bb200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 21:48:11 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -326,26 +326,18 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 +3.3V_RUN: supplied by +3.3V_SYS
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 +5V_VDD_TS_SW: supplied by +5V_SYS
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
@@ -355,17 +347,22 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
@@ -385,8 +382,6 @@
 +3.3V_PANEL: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -397,6 +392,11 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.287732596 -0800
+++ /tmp/foob	2018-01-14 22:02:46.291732615 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,21 +40,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 3.4 MiB/s
+	 ##################################
+	 3.3 MiB/s
 done
-Bytes transferred = 6208968 (5ebdc8 hex)
+Bytes transferred = 6210600 (5ec428 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ebdc8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ec428 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -360,11 +360,10 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -381,13 +380,14 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
+cfg80211: failed to load regulatory.db
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.311732709 -0800
+++ /tmp/foob	2018-01-14 22:02:46.315732727 -0800
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 2.8 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6373968 (614250 hex)
+Bytes transferred = 6376408 (614bd8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.8 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x614250 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x614bd8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:49:09 PST 2018
+Linux version 4.15.0-rc7-next-20180115-227384-gb625c1f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:30 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -387,11 +387,11 @@
 ALSA device list:
   #1: GoogleNyanBig
 cfg80211: failed to load regulatory.db
-tegra-sor 54540000.sor: failed to probe output: -517
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -404,16 +404,14 @@
 panel-simple panel: panel supply power not found, using dummy regulator
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    2.908510] alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
@@ -423,4 +421,6 @@
 alloc_contig_range: [fbca1, fbca2) PFNs busy
 alloc_contig_range: [fbca2, fbca3) PFNs busy
 alloc_contig_range: [fbca3, fbca4) PFNs busy
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    3.097609] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.331732802 -0800
+++ /tmp/foob	2018-01-14 22:02:46.335732820 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801705 us
+Bootloader-Cpu Init at (time stamp): 1801169 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801679  us
-Bootloader (AosInit) time: 733439 us
-Bootloader Main Init time: 180288 us
-BlockDevMgrInit time: 157497 us
+Miscellaneous avp time: 1801143  us
+Bootloader (AosInit) time: 733449 us
+Bootloader Main Init time: 180232 us
+BlockDevMgrInit time: 157544 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77138 us 
-Display init time: 574521 us
+Partition Table load: 77032 us 
+Display init time: 574603 us
 Kernel read time: 1562 msec
 Load Kernel Size:   20686848 Bytes
 Bl Kernel ReadSpeed: 13243000 Bytes/sec
-Pre-Kernel Jump time: 4371749 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9553924 us
+Pre-Kernel Jump time: 4371523 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9551506 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 21:54:12 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -96,7 +96,7 @@
 Initmem setup node 0 [mem 0x0000000080000000-0x00000000ec5fffff]
 /cpus/cpu@1: missing enable-method property
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+percpu: Embedded 23 pages/cpu @        (ptrval) s56832 r8192 d29184 u94208
 Detected PIPT I-cache on CPU0
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA
@@ -155,9 +155,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000002a0ee200, 1 data @ 00000000f3656952)
+vdso: 2 pages (1 code @ 0000000075e8e81a, 1 data @ 0000000016c83dff)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -290,8 +290,6 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.387733063 -0800
+++ /tmp/foob	2018-01-14 22:02:46.391733082 -0800
@@ -47,10 +47,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ################################
-	 3.9 MiB/s
+	 #################################
+	 3.8 MiB/s
 done
-Bytes transferred = 8102400 (7ba200 hex)
+Bytes transferred = 8106496 (7bb200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7ba200 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7bb200 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 21:48:11 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -272,7 +272,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x938753e2, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xbc79ba54, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -347,13 +347,13 @@
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
+ mmcblk1: p1 p2
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
- mmcblk1: p1 p2
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.399733119 -0800
+++ /tmp/foob	2018-01-14 22:02:46.403733138 -0800
@@ -45,10 +45,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 4 MiB/s
+	 ##################################
+	 3.9 MiB/s
 done
-Bytes transferred = 6208968 (5ebdc8 hex)
+Bytes transferred = 6210600 (5ec428 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ebdc8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ec428 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:09 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x1e0a76be, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x477d44f8, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -339,8 +339,8 @@
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
  mmcblk1: p1 p2
+hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.427733250 -0800
+++ /tmp/foob	2018-01-14 22:02:46.431733269 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 738153 us
-Basic modules init took 348530 us
+Tegraboot started after 735893 us
+Basic modules init took 348654 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14370 us
-Carveout took 252698 us
-CPU initialization took 92446 us
-Total time taken by TegraBoot 708044 us
+Next stage binary read took 14388 us
+Carveout took 252663 us
+CPU initialization took 92458 us
+Total time taken by TegraBoot 708163 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.577] LPDDR4 Training: Number of tables = 10
+64b[0001.575] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:53:45 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 21:51:52 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
-pcpu-alloc: s55168 r8192 d30848 u94208 alloc=23*4096
+percpu: Embedded 23 pages/cpu @        (ptrval) s56832 r8192 d29184 u94208
+pcpu-alloc: s56832 r8192 d29184 u94208 alloc=23*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -238,7 +238,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000003278d9da, 1 data @ 00000000a52ab694)
+vdso: 2 pages (1 code @ 00000000b23c7e55, 1 data @ 00000000a9b66110)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -274,7 +274,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a00000
+kvm [1]: IDMAP page: 80a02000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.447733344 -0800
+++ /tmp/foob	2018-01-14 22:02:46.451733362 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 757912 us
-Basic modules init took 348772 us
+Tegraboot started after 729064 us
+Basic modules init took 348889 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14344 us
-Carveout took 252667 us
-CPU initialization took 92974 us
-Total time taken by TegraBoot 708757 us
+Next stage binary read took 14343 us
+Carveout took 252658 us
+CPU initialization took 92470 us
+Total time taken by TegraBoot 708360 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.597] LPDDR4 Training: Number of tables = 10
+64b[0001.568] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17187328 bytes read in 858 ms (19.1 MiB/s)
+17187328 bytes read in 851 ms (19.3 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 21:54:12 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
-pcpu-alloc: s55168 r8192 d30848 u94208 alloc=23*4096
+percpu: Embedded 23 pages/cpu @        (ptrval) s56832 r8192 d29184 u94208
+pcpu-alloc: s56832 r8192 d29184 u94208 alloc=23*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -238,7 +238,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000bff62319, 1 data @ 00000000dd18e0fb)
+vdso: 2 pages (1 code @ 000000006defb40b, 1 data @ 000000006f5dfe2d)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -274,7 +274,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f9000
+kvm [1]: IDMAP page: 809fa000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.455733381 -0800
+++ /tmp/foob	2018-01-14 22:02:46.459733400 -0800
@@ -0,0 +1,1215 @@
+
+
+Pass: Linux Boot Test 1
+	Test Owner(s): N/A
+	Execution Time 56.35 sec
+	Percent passed so far: 50.0
+	
+
+
+Pass: Linux Boot Test 2
+	Test Owner(s): N/A
+	Execution Time 55.88 sec
+	Percent passed so far: 100.0
+	
+
+Final Score: 100.0
+è.485] Enabled early print
+[TegraBoot] (version 24.00.2015.42-mobile-46960d1c)
+Processing in recovery mode
+A02 Bootrom Patch rev = 63
+Power-up reason: pmc por
+Established communication link with host
+Odmdata from BCT: 0x00084000
+DebugPort= 0x3
+BoardId read from EEPROM/NCT: 2180
+Turned on fan for loki board
+Key release before reqd. time for fastboot
+No Battery Present
+RamCode = 0
+Platform has Ddr4 type ram
+max77620 disabling SD1 Remote Sense
+Setting Ddr voltage to 1125mv
+Serial Number of Pmic Max77663: 0x516b1
+Entering ramdump check
+Get RamDumpCarveOut = 0x0
+RamDumpCarveOut=0x0,  RamDumperFlag=0xe59ff3f8
+Last reboot was clean, booting normally!
+Sdram initialization is successful 
+SecureOs Carveout Base=0xff800000 Size=0x00800000
+GSC1 Carveout Base=0xff700000 Size=0x00100000
+GSC2 Carveout Base=0xff600000 Size=0x00100000
+GSC3 Carveout Base=0xff500000 Size=0x00100000
+GSC4 Carveout Base=0xff400000 Size=0x00100000
+GSC5 Carveout Base=0xff300000 Size=0x00100000
+BpmpFw Carveout Base=0xff2c0000 Size=0x00040000
+Lp0 Carveout Base=0xff2bf000 Size=0x00001000
+RamDump Carveout Base=0xff23f000 Size=0x00080000
+Platform-DebugCarveout: 0
+Downloaded Bct successfully
+Downloaded bootloader successfully at 0x92c00000
+Downloaded rp1 successfully at 0x83000000
+MAX77620_GPIO1 Configured.
+MAX77620_GPIO5 Configured.
+CPU power rail is up
+CPU clock enabled
+Performing RAM repair
+Updating A64 Warmreset Address to 0x92c002e9
+Enable APE clock/reset
+Error in NvTbootGetTOSBinaryLength: 0x11 !
+Loading Secure OS image failed. 
+Set NvDecSticky Bits
+GSC1 address : ff700000
+GSC2 address ff63fffc value c0edbbcc
+GSC2 address : ff600000
+GSC3 address : ff500000
+GSC4 address : ff400000
+GSC5 address : ff300000
+GSC MC Settings done
+NvTbootPackSdramParams: start. 
+NvTbootPackSdramParams: done. 
+Next binary entry address: 0x92c00258 
+BoardId: 2180
+dram memory type is 3
+Tegraboot started after 31216785 us
+Basic modules init took -31216785 us
+USB data transfer took 0 us
+Carveout took 32715304 us
+CPU initialization took 3629 us
+Total time taken by TegraBoot 1502148 us
+
+Starting CPU & Halting co-processor 
+
+
+Debug Init done
+Marked DTB cacheable
+Bootloader DTB loaded at 0x83000000
+DeviceTree Init done
+Pinmux applied successfully
+gicd_base: 0x50041000
+gicc_base: 0x50042000
+Interrupts Init done
+Using base:0x60005008 & irq:33 for tick-timer
+Using base:0x60005000 for delay-timer
+platform_init_timer: DONE
+Timer(tick) Init done
+osc freq = 38400 khz
+
+welcome to cboot
+
+Cboot Version: 24.00.2015.42-t210-63d15635
+calling constructors
+initializing heap
+initializing threads
+initializing timers
+creating bootstrap completion thread
+top of bootstrap2()
+CPU: ARM Cortex A57
+CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
+initializing platform
+config for ddr50 mode completed
+sdmmc bdev is already initialized
+of_register: registering tegra_udc to of_hal
+of_register: registering inv20628-driver to of_hal
+of_register: registering ads1015-driver to of_hal
+of_register: registering lp8557-bl-driver to of_hal
+of_register: registering bq2419x_charger to of_hal
+of_register: registering cpc to of_hal
+of_register: registering bq27441_fuel_gauge to of_hal
+gpio framework initialized
+of_register: registering tca9539_gpio to of_hal
+of_register: registering tca9539_gpio to of_hal
+of_register: registering i2c_bus_driver to of_hal
+of_register: registering i2c_bus_driver to of_hal
+of_register: registering i2c_bus_driver to of_hal
+pmic framework initialized
+of_register: registering max77620_pmic to of_hal
+regulator framework initialized
+of_register: registering tps65132_bl_driver to of_hal
+of_register: registering tegra_xhci to of_hal
+initializing target
+gpio_driver_register: register 'tegra_gpio_driver' driver
+fixed regulator driver initialized
+initializing OF layer
+of_children_init: Ops found for compatible string nvidia,tegra210-xhci
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string ti,lp8557
+I2C slave not started
+I2C write failed
+Writing offset failed
+failed to read 0x 0
+lp8557: Couldn't turn off backlight: -3
+lp8557: device config err: -3of_children_init: Ops found for compatible string ti,tca9539
+tca9539_init: i2c bus: 2, slave addr: 0xe8
+gpio_driver_register: register 'tca9539_gpio_driver' driver
+of_children_init: Ops found for compatible string ti,tca9539
+tca9539_init: i2c bus: 2, slave addr: 0xee
+gpio_driver_register: register 'tca9539_gpio_driver' driver
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string maxim,max77620
+max77620_init using irq 118
+register 'maxim,max77620' pmic
+gpio_driver_register: register 'max77620-gpio' driver
+of_children_init: Ops found for compatible string nvidia,tegra210-i2c
+I2C Bus Init done
+of_children_init: Ops found for compatible string nvidia,tegra210-udc
+calling apps_init()
+Found 19 GPT partitions in "sdmmc3_user"
+Proceeding to flashing Server
+usbdcd_reinit Initialize driver to use already enumerated device
+nv3p_priv_usbf_open USB configuration success
+Writing GPT partition
+Erasing Boot device
+Erasing Storage Device
+Sanitizing Storage Device
+Writing protective mbr
+Writing primary GPT
+Writing secondary GPT
+Found 18 GPT partitions in "sdmmc3_user"
+Writing NVC partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition NVC write successful.
+Writing APP partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition APP write successful.
+Writing TBC partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition TBC write successful.
+Writing EBT partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition EBT write successful.
+Writing BPF partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition BPF write successful.
+Writing WB0 partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition WB0 write successful.
+Writing RP1 partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition RP1 write successful.
+Writing TOS partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition TOS write successful.
+Writing DTB partition
+bct_init bctinit 
+bct_init bctinit 
+bct_init bctinit 
+partition DTB write successful.
+Writing BCT partition
+bct_init bctinit 
+partition BCT write successful.
+Change state to cold boot mode
+Flushing data t[0000.153] [TegraBoot] (version 24.00.2015.42-mobile-ec3b827e)
+Processing in cold boot mode Bootloader 2
+A02 Bootrom Patch rev = 63
+Power-up reason: software reset
+No Battery Present
+RamCode = 0
+Platform has Ddr4 type ram
+max77620 disabling SD1 Remote Sense
+Setting Ddr voltage to 1125mv
+Serial Number of Pmic Max77663: 0x516b1
+Entering ramdump check
+Get RamDumpCarveOut = 0x0
+RamDumpCarveOut=0x0,  RamDumperFlag=0xe59ff3f8
+Last reboot was clean, booting normally!
+Sdram initialization is successful 
+SecureOs Carveout Base=0xff800000 Size=0x00800000
+GSC1 Carveout Base=0xff700000 Size=0x00100000
+GSC2 Carveout Base=0xff600000 Size=0x00100000
+GSC3 Carveout Base=0xff500000 Size=0x00100000
+GSC4 Carveout Base=0xff400000 Size=0x00100000
+GSC5 Carveout Base=0xff300000 Size=0x00100000
+BpmpFw Carveout Base=0xff2c0000 Size=0x00040000
+Lp0 Carveout Base=0xff2bf000 Size=0x00001000
+RamDump Carveout Base=0xff23f000 Size=0x00080000
+Platform-DebugCarveout: 0
+Nck Carveout Base=0xff03f000 Size=0x00200000
+Non secure mode. Disable rollback prevention
+AOTAG Init Done
+Using GPT Primary to query partitions 
+Loading Tboot-CPU binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0xa0000000, entry address is 0xa0000258
+Bootloader downloaded successfully.
+Downloaded Tboot-CPU binary to 0xa0000258
+MAX77620_GPIO1 Configured.
+MAX77620_GPIO5 Configured.
+CPU power rail is up
+CPU clock enabled
+Performing RAM repair
+Updating A64 Warmreset Address to 0xa00002e9
+Bootloader DTB Load Address: 0x83000000
+Kernel DTB Load Address: 0x83080000
+Loading cboot binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0x8010fda8, entry address is 0x80110000
+Bootloader downloaded successfully.
+GPT: Partition NOT found ! 
+Find Partition via GPT Failed
+Find Partition via PT Failed
+function NvTbootGetBinaryOffsets: 0x1 error
+Error in NvTbootLoadBinary: 0x1 !
+Next binary entry address: 0x80110000 
+BoardId: 2180
+dram memory type is 3
+WB0 init successful
+Bpmp FW successfully loaded
+Set NvDecSticky Bits
+GSC1 address : ff700000
+GSC2 address ff63fffc value c0edbbcc
+GSC2 address : ff600000
+GSC3 address : ff500000
+GSC4 address : ff400000
+GSC5 address : ff300000
+GSC MC Settings done
+TOS old plaintext Image length 65536
+*** Secure OS image signature not verified ***
+Loading and Validation of Secure OS Successful
+NvTbootPackSdramParams: start. 
+NvTbootPackSdramParams: done. 
+Tegraboot started after 132148 us
+Basic modules init took 292402 us
+Sec Bootdevice Read Time = 193 ms, Read Size = 8464 KB
+Sec Bootdevice Write Time = -1940251267 ms, Write Size = 343597383 KB
+Next stage binary read took 12214 us
+Carveout took 264518 us
+CPU initialization took 92767 us
+Total time taken by TegraBoot 661901 us
+
+Starting CPU & Halting co-processor 
+
+64b[0000.919] RamCode = 0
+LPDDR4 Training: Read DT: Number of tables = 10
+EMC Training (SRC-freq: 204000; DST-freq: 40800)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 68000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 102000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 204000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 408000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 665600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 800000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1065600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1331200)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1600000)
+EMC Training Successful
+Switching to 800000 KHz Success
+DT Write: emc-table@40800 succeeded
+DT Write: emc-table@68000 succeeded
+DT Write: emc-table@102000 succeeded
+DT Write: emc-table@204000 succeeded
+DT Write: emc-table@408000 succeeded
+DT Write: emc-table@665600 succeeded
+DT Write: emc-table@800000 succeeded
+DT Write: emc-table@1065600 succeeded
+DT Write: emc-table@1331200 succeeded
+DT Write: emc-table@1600000 succeeded
+LPDDR4 Training: Write DT: Number of tables = 10
+
+
+U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:47:08 -0700)
+
+TEGRA210
+Model: NVIDIA P2371-2180
+Board: NVIDIA P2371-2180
+DRAM:  3.5 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   No ethernet found.
+Hit any key to stop autoboot:  2 ¸ø[0000.121] [TegraBoot] (version 24.00.2015.42-mobile-ec3b827e)
+Processing in cold boot mode Bootloader 2
+A02 Bootrom Patch rev = 63
+Power-up reason: reset button
+No Battery Present
+RamCode = 0
+Platform has Ddr4 type ram
+max77620 disabling SD1 Remote Sense
+Setting Ddr voltage to 1125mv
+Serial Number of Pmic Max77663: 0x516b1
+Entering ramdump check
+Get RamDumpCarveOut = 0x0
+RamDumpCarveOut=0x0,  RamDumperFlag=0xe59ff3f8
+Last reboot was clean, booting normally!
+Sdram initialization is successful 
+SecureOs Carveout Base=0xff800000 Size=0x00800000
+GSC1 Carveout Base=0xff700000 Size=0x00100000
+GSC2 Carveout Base=0xff600000 Size=0x00100000
+GSC3 Carveout Base=0xff500000 Size=0x00100000
+GSC4 Carveout Base=0xff400000 Size=0x00100000
+GSC5 Carveout Base=0xff300000 Size=0x00100000
+BpmpFw Carveout Base=0xff2c0000 Size=0x00040000
+Lp0 Carveout Base=0xff2bf000 Size=0x00001000
+RamDump Carveout Base=0xff23f000 Size=0x00080000
+Platform-DebugCarveout: 0
+Nck Carveout Base=0xff03f000 Size=0x00200000
+Non secure mode. Disable rollback prevention
+AOTAG Init Done
+Using GPT Primary to query partitions 
+Loading Tboot-CPU binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0xa0000000, entry address is 0xa0000258
+Bootloader downloaded successfully.
+Downloaded Tboot-CPU binary to 0xa0000258
+MAX77620_GPIO1 Configured.
+MAX77620_GPIO5 Configured.
+CPU power rail is up
+CPU clock enabled
+Performing RAM repair
+Updating A64 Warmreset Address to 0xa00002e9
+Bootloader DTB Load Address: 0x83000000
+Kernel DTB Load Address: 0x83080000
+Loading cboot binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0x8010fda8, entry address is 0x80110000
+Bootloader downloaded successfully.
+GPT: Partition NOT found ! 
+Find Partition via GPT Failed
+Find Partition via PT Failed
+function NvTbootGetBinaryOffsets: 0x1 error
+Error in NvTbootLoadBinary: 0x1 !
+Next binary entry address: 0x80110000 
+BoardId: 2180
+dram memory type is 3
+WB0 init successful
+Bpmp FW successfully loaded
+Set NvDecSticky Bits
+GSC1 address : ff700000
+GSC2 address ff63fffc value c0edbbcc
+GSC2 address : ff600000
+GSC3 address : ff500000
+GSC4 address : ff400000
+GSC5 address : ff300000
+GSC MC Settings done
+TOS old plaintext Image length 65536
+*** Secure OS image signature not verified ***
+Loading and Validation of Secure OS Successful
+NvTbootPackSdramParams: start. 
+NvTbootPackSdramParams: done. 
+Tegraboot started after 99078 us
+Basic modules init took 292175 us
+Sec Bootdevice Read Time = 193 ms, Read Size = 8464 KB
+Sec Bootdevice Write Time = -1940251267 ms, Write Size = 343597383 KB
+Next stage binary read took 12214 us
+Carveout took 264514 us
+CPU initialization took 92769 us
+Total time taken by TegraBoot 661672 us
+
+Starting CPU & Halting co-processor 
+
+64b[0000.887] RamCode = 0
+LPDDR4 Training: Read DT: Number of tables = 10
+EMC Training (SRC-freq: 204000; DST-freq: 40800)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 68000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 102000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 204000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 408000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 665600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 800000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1065600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1331200)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1600000)
+EMC Training Successful
+Switching to 800000 KHz Success
+DT Write: emc-table@40800 succeeded
+DT Write: emc-table@68000 succeeded
+DT Write: emc-table@102000 succeeded
+DT Write: emc-table@204000 succeeded
+DT Write: emc-table@408000 succeeded
+DT Write: emc-table@665600 succeeded
+DT Write: emc-table@800000 succeeded
+DT Write: emc-table@1065600 succeeded
+DT Write: emc-table@1331200 succeeded
+DT Write: emc-table@1600000 succeeded
+LPDDR4 Training: Write DT: Number of tables = 10
+
+
+U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:47:08 -0700)
+
+TEGRA210
+Model: NVIDIA P2371-2180
+Board: NVIDIA P2371-2180
+DRAM:  3.5 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   No ethernet found.
+Hit any key to stop autoboot:  2  1  0 
+MMC: no card present
+mmc_init: -123, time 0
+switch to partitions #0, OK
+mmc0(part 0) is current device
+Scanning mmc 0:1...
+Found /boot/extlinux/extlinux.conf
+Retrieving file: /boot/extlinux/extlinux.conf
+431 bytes read in 65 ms (5.9 KiB/s)
+p2371-2180 NFS boot options
+1:	primary kernel
+Enter choice: 1:	primary kernel
+Retrieving file: /boot/initrd
+6915406 bytes read in 212 ms (31.1 MiB/s)
+Retrieving file: /boot/Image
+17318400 bytes read in 440 ms (37.5 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2476/nfsroot,nolock,nfsvers=2 rootwait
+Retrieving file: /boot/tegra210-p2371-2180.dtb
+52710 bytes read in 61 ms (843.8 KiB/s)
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 0000000082000000, end 000000008200fde5
+
+Starting kernel ...
+
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [uart0] disabled
+bootconsole [uart0] disabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+max77620 1-003c: PMIC Version OTP:0x3C and ES:0x8
+max77620-sd0: supplied by regulator-dummy
+max77620-sd1: supplied by regulator-dummy
+max77620-sd2: supplied by regulator-dummy
+max77620-sd3: supplied by regulator-dummy
+max77620-ldo0: supplied by regulator-dummy
+max77620-ldo1: supplied by regulator-dummy
+max77620-ldo2: supplied by regulator-dummy
+max77620-ldo3: supplied by regulator-dummy
+VDD_CAM_HV: Bringing 3100000uV into 2800000-2800000uV
+max77620-ldo4: supplied by regulator-dummy
+VDD_RTC: Bringing 1000000uV into 850000-850000uV
+max77620-ldo5: supplied by regulator-dummy
+VDD_TS_HV: Bringing 3100000uV into 3300000-3300000uV
+max77620-ldo6: supplied by regulator-dummy
+VDD_TS_1V8: Bringing 2800000uV into 1800000-1800000uV
+max77620-ldo7: supplied by regulator-dummy
+max77620-ldo8: supplied by regulator-dummy
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+usbcore: registered new interface driver r8152
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: Got CD GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+VDD_5V0_SYS: supplied by VDD_SYS_MUX
+AVDD_DSI_CSI_1V2: supplied by AVDD_SYS_1V2
+VDD_3V3_SYS: supplied by VDD_SYS_MUX
+VDD_3V3_SD: supplied by VDD_3V3_SYS
+VDD_DIS_3V3_LCD: supplied by VDD_3V3_SYS
+VDD_LCD_1V8_DIS: supplied by VDD_1V8
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 016G32 14.7 GiB 
+mmcblk0boot0: mmc0:0001 016G32 partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 016G32 partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB, chardev (240:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
+RTL_5V: supplied by VDD_5V0_SYS
+USB_VBUS_EN1: supplied by VDD_5V0_SYS
+VDD_HDMI_5V0: supplied by VDD_5V0_SYS
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-3: usb2-3 supply vbus not found, using dummy regulator
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+ usb3-1: usb3-1 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
+tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, ignoring
+tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, ignoring
+tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+tegra-xusb 70090000.usb: 70090000.usb supply dvdd-pex-pll not found, using dummy regulator
+tegra-xusb 70090000.usb: 70090000.usb supply hvdd-pex-pll-e not found, using dummy regulator
+tegra-xusb 70090000.usb: Firmware timestamp: 2015-08-10 09:47:54 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 325, io mem 0x70090000
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 5 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
+usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 4 ports detected
+sdhci-tegra 700b0000.sdhci: Got CD GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+max77686-rtc max77620-rtc: setting system clock to 2018-01-15 05:58:36 UTC (1515995916)
+usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+usb 2-1: reset SuperSpeed USB device number 2 using tegra-xusb
+r8152 2-1:1.0 eth0: v1.09.9
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+r8152 2-1:1.0 eth0: carrier on
+IP-Config: Complete:
+     device=eth0, hwaddr=00:04:4b:79:42:e1, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     host=192.168.99.2, domain=, nis-domain=(none)
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+AVDD_DSI_CSI_1V2: disabling
+VDD_PRE_REG_1V35: disabling
+VDD_CAM_HV: disabling
+VDD_TS_HV: disabling
+VDD_TS_1V8: disabling
+AVDD_SATA_HDMI_DP_1V05: disabling
+VDD_3V3_SD: disabling
+VDD_HDMI_5V0: disabling
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 1152K
+/init: line 58: chmod: command not found
+L4T-INITRD Build DATE: Mon Jan 15 05:58:41 UTC 2018
+Root device found: nfs
+Ethernet interfaces: eth0
+IP Address: 192.168.99.2
+Rootfs mounted over nfs
+Switching from initrd to actual rootfs
+systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
+systemd[1]: Detected architecture arm64.
+
+Welcome to [1mUbuntu 16.04 LTS[0m!
+
+systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Listening on udev Kernel Socket.
+Listening on udev Kernel Socket.
+systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+Listening on /dev/initctl Compatibility Named Pipe.
+systemd[1]: Reached target Encrypted Volumes.
+Reached target Encrypted Volumes.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Listening on Syslog Socket.
+Listening on Syslog Socket.
+systemd[1]: Listening on Journal Socket.
+Listening on Journal Socket.
+systemd[1]: Created slice System Slice.
+Created slice System Slice.
+         Mounting Huge Pages File System...
+         Mounting RPC Pipe File System...
+         Starting Remount Root and Kernel File Systems...
+         Starting Create Static Device Nodes in /dev...
+         Starting Load Kernel Modules...
+         Mounting Debug File System...
+Reached target Swap.
+Started Forward Password Requests to Wall Directory Watch.
+Created slice system-getty.slice.
+Listening on udev Control Socket.
+Created slice system-serial\x2dgetty.slice.
+Started Dispatch Password Requests to Console Directory Watch.
+Listening on Journal Socket (/dev/log).
+         Starting Journal Service...
+Created slice User and Session Slice.
+         Mounting POSIX Message Queue File System...
+Reached target Paths.
+Reached target Slices.
+Mounted Debug File System.
+Mounted POSIX Message Queue File System.
+Mounted Huge Pages File System.
+Mounted RPC Pipe File System.
+Started Remount Root and Kernel File Systems.
+Started Create Static Device Nodes in /dev.
+Started Load Kernel Modules.
+Started Journal Service.
+         Mounting Configuration File System...
+         Starting Apply Kernel Variables...
+         Starting udev Kernel Device Manager...
+         Starting udev Coldplug all Devices...
+Reached target Local File Systems (Pre).
+Reached target Local File Systems.
+         Starting Preprocess NFS configuration...
+         Starting Set console keymap...
+         Starting Load/Save Random Seed...
+         Starting Flush Journal to Persistent Storage...
+Mounted Configuration File System.
+Started Apply Kernel Variables.
+Failed to start Set console keymap.
+See 'systemctl status console-setup.service' for details.
+Started Preprocess NFS configuration.
+Started Load/Save Random Seed.
+systemd-journald[1548]: Received request to flush runtime journal from PID 1
+Reached target NFS client services.
+Reached target Remote File Systems (Pre).
+Reached target Remote File Systems.
+         Starting Raise network interfaces...
+Started udev Kernel Device Manager.
+Started Flush Journal to Persistent Storage.
+         Starting Create Volatile Files and Directories...
+Started udev Coldplug all Devices.
+Found device /dev/ttyS0.
+Started Create Volatile Files and Directories.
+random: crng init done
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
+Reached target System Time Synchronized.
+         Starting Update UTMP about System Boot/Shutdown...
+Started Update UTMP about System Boot/Shutdown.
+Reached target System Initialization.
+Started Daily Cleanup of Temporary Directories.
+Listening on RPCbind Server Activation Socket.
+Started Daily apt activities.
+Reached target Timers.
+Listening on D-Bus System Message Bus Socket.
+Reached target Sockets.
+Reached target Basic System.
+         Starting Permit User Sessions...
+         Starting LSB: Start NTP daemon...
+         Starting System Logging Service...
+         Starting OpenBSD Secure Shell server...
+         Starting /etc/rc.local Compatibility...
+Started Regular background program processing daemon.
+Started D-Bus System Message Bus.
+         Starting Login Service...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started System Logging Service.
+Started Permit User Sessions.
+Started /etc/rc.local Compatibility.
+Started Serial Getty on ttyS0.
+Started Getty on tty1.
+Reached target Login Prompts.
+Started Login Service.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started OpenBSD Secure Shell server.
+Started LSB: Start NTP daemon.
+Reached target Multi-User System.
+Reached target Graphical Interface.
+         Starting Update UTMP about System Runlevel Changes...
+Started Update UTMP about System Runlevel Changes.
+

+Ubuntu 16.04 LTS tegra-ubuntu ttyS0
+
+tegra-ubuntu login: [0000.121] [TegraBoot] (version 24.00.2015.42-mobile-ec3b827e)
+Processing in cold boot mode Bootloader 2
+A02 Bootrom Patch rev = 63
+Power-up reason: reset button
+No Battery Present
+RamCode = 0
+Platform has Ddr4 type ram
+max77620 disabling SD1 Remote Sense
+Setting Ddr voltage to 1125mv
+Serial Number of Pmic Max77663: 0x516b1
+Entering ramdump check
+Get RamDumpCarveOut = 0x0
+RamDumpCarveOut=0x0,  RamDumperFlag=0xe59ff3f8
+Last reboot was clean, booting normally!
+Sdram initialization is successful 
+SecureOs Carveout Base=0xff800000 Size=0x00800000
+GSC1 Carveout Base=0xff700000 Size=0x00100000
+GSC2 Carveout Base=0xff600000 Size=0x00100000
+GSC3 Carveout Base=0xff500000 Size=0x00100000
+GSC4 Carveout Base=0xff400000 Size=0x00100000
+GSC5 Carveout Base=0xff300000 Size=0x00100000
+BpmpFw Carveout Base=0xff2c0000 Size=0x00040000
+Lp0 Carveout Base=0xff2bf000 Size=0x00001000
+RamDump Carveout Base=0xff23f000 Size=0x00080000
+Platform-DebugCarveout: 0
+Nck Carveout Base=0xff03f000 Size=0x00200000
+Non secure mode. Disable rollback prevention
+AOTAG Init Done
+Using GPT Primary to query partitions 
+Loading Tboot-CPU binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0xa0000000, entry address is 0xa0000258
+Bootloader downloaded successfully.
+Downloaded Tboot-CPU binary to 0xa0000258
+MAX77620_GPIO1 Configured.
+MAX77620_GPIO5 Configured.
+CPU power rail is up
+CPU clock enabled
+Performing RAM repair
+Updating A64 Warmreset Address to 0xa00002e9
+Bootloader DTB Load Address: 0x83000000
+Kernel DTB Load Address: 0x83080000
+Loading cboot binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0x8010fda8, entry address is 0x80110000
+Bootloader downloaded successfully.
+GPT: Partition NOT found ! 
+Find Partition via GPT Failed
+Find Partition via PT Failed
+function NvTbootGetBinaryOffsets: 0x1 error
+Error in NvTbootLoadBinary: 0x1 !
+Next binary entry address: 0x80110000 
+BoardId: 2180
+dram memory type is 3
+WB0 init successful
+Bpmp FW successfully loaded
+Set NvDecSticky Bits
+GSC1 address : ff700000
+GSC2 address ff63fffc value c0edbbcc
+GSC2 address : ff600000
+GSC3 address : ff500000
+GSC4 address : ff400000
+GSC5 address : ff300000
+GSC MC Settings done
+TOS old plaintext Image length 65536
+*** Secure OS image signature not verified ***
+Loading and Validation of Secure OS Successful
+NvTbootPackSdramParams: start. 
+NvTbootPackSdramParams: done. 
+Tegraboot started after 99076 us
+Basic modules init took 292181 us
+Sec Bootdevice Read Time = 193 ms, Read Size = 8464 KB
+Sec Bootdevice Write Time = -1940251267 ms, Write Size = 343597383 KB
+Next stage binary read took 12214 us
+Carveout took 264513 us
+CPU initialization took 92768 us
+Total time taken by TegraBoot 661676 us
+
+Starting CPU & Halting co-processor 
+
+64b[0000.887] RamCode = 0
+LPDDR4 Training: Read DT: Number of tables = 10
+EMC Training (SRC-freq: 204000; DST-freq: 40800)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 68000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 102000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 204000)
+EMC Training Skipped
+EMC Training (SRC-freq: 204000; DST-freq: 408000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 665600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 800000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1065600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1331200)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1600000)
+EMC Training Successful
+Switching to 800000 KHz Success
+DT Write: emc-table@40800 succeeded
+DT Write: emc-table@68000 succeeded
+DT Write: emc-table@102000 succeeded
+DT Write: emc-table@204000 succeeded
+DT Write: emc-table@408000 succeeded
+DT Write: emc-table@665600 succeeded
+DT Write: emc-table@800000 succeeded
+DT Write: emc-table@1065600 succeeded
+DT Write: emc-table@1331200 succeeded
+DT Write: emc-table@1600000 succeeded
+LPDDR4 Training: Write DT: Number of tables = 10
+
+
+U-Boot 2017.03-g8537ddd769f4 (Oct 04 2017 - 08:47:08 -0700)
+
+TEGRA210
+Model: NVIDIA P2371-2180
+Board: NVIDIA P2371-2180
+DRAM:  3.5 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   No ethernet found.
+Hit any key to stop autoboot:  2  1  0 
+MMC: no card present
+mmc_init: -123, time 1
+switch to partitions #0, OK
+mmc0(part 0) is current device
+Scanning mmc 0:1...
+Found /boot/extlinux/extlinux.conf
+Retrieving file: /boot/extlinux/extlinux.conf
+431 bytes read in 65 ms (5.9 KiB/s)
+p2371-2180 NFS boot options
+1:	primary kernel
+Enter choice: 1:	primary kernel
+Retrieving file: /boot/initrd
+6915406 bytes read in 212 ms (31.1 MiB/s)
+Retrieving file: /boot/Image
+17318400 bytes read in 440 ms (37.5 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2476/nfsroot,nolock,nfsvers=2 rootwait
+Retrieving file: /boot/tegra210-p2371-2180.dtb
+52710 bytes read in 61 ms (843.8 KiB/s)
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 0000000082000000, end 000000008200fde5
+
+Starting kernel ...
+
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [uart0] disabled
+bootconsole [uart0] disabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+max77620 1-003c: PMIC Version OTP:0x3C and ES:0x8
+max77620-sd0: supplied by regulator-dummy
+max77620-sd1: supplied by regulator-dummy
+max77620-sd2: supplied by regulator-dummy
+max77620-sd3: supplied by regulator-dummy
+max77620-ldo0: supplied by regulator-dummy
+max77620-ldo1: supplied by regulator-dummy
+max77620-ldo2: supplied by regulator-dummy
+max77620-ldo3: supplied by regulator-dummy
+VDD_CAM_HV: Bringing 3100000uV into 2800000-2800000uV
+max77620-ldo4: supplied by regulator-dummy
+VDD_RTC: Bringing 1000000uV into 850000-850000uV
+max77620-ldo5: supplied by regulator-dummy
+VDD_TS_HV: Bringing 3100000uV into 3300000-3300000uV
+max77620-ldo6: supplied by regulator-dummy
+VDD_TS_1V8: Bringing 2800000uV into 1800000-1800000uV
+max77620-ldo7: supplied by regulator-dummy
+max77620-ldo8: supplied by regulator-dummy
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+usbcore: registered new interface driver r8152
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: Got CD GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 016G32 14.7 GiB 
+mmcblk0boot0: mmc0:0001 016G32 partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 016G32 partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB, chardev (240:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
+VDD_5V0_SYS: supplied by VDD_SYS_MUX
+AVDD_DSI_CSI_1V2: supplied by AVDD_SYS_1V2
+VDD_3V3_SYS: supplied by VDD_SYS_MUX
+VDD_3V3_SD: supplied by VDD_3V3_SYS
+VDD_DIS_3V3_LCD: supplied by VDD_3V3_SYS
+VDD_LCD_1V8_DIS: supplied by VDD_1V8
+RTL_5V: supplied by VDD_5V0_SYS
+USB_VBUS_EN1: supplied by VDD_5V0_SYS
+VDD_HDMI_5V0: supplied by VDD_5V0_SYS
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-3: usb2-3 supply vbus not found, using dummy regulator
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+ usb3-1: usb3-1 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
+tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, retrying
+tegra-pcie 1003000.pcie: link 0 down, ignoring
+tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, retrying
+tegra-pcie 1003000.pcie: link 1 down, ignoring
+tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+tegra-xusb 70090000.usb: 70090000.usb supply dvdd-pex-pll not found, using dummy regulator
+tegra-xusb 70090000.usb: 70090000.usb supply hvdd-pex-pll-e not found, using dummy regulator
+tegra-xusb 70090000.usb: Firmware timestamp: 2015-08-10 09:47:54 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 325, io mem 0x70090000
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 5 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
+usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 4 ports detected
+sdhci-tegra 700b0000.sdhci: Got CD GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+max77686-rtc max77620-rtc: setting system clock to 2018-01-15 05:59:37 UTC (1515995977)
+usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+usb 2-1: reset SuperSpeed USB device number 2 using tegra-xusb
+r8152 2-1:1.0 eth0: v1.09.9
+tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe
+pwm-regulator regulators:regulator@100: Failed to get PWM: -517
+r8152 2-1:1.0 eth0: carrier on
+IP-Config: Complete:
+     device=eth0, hwaddr=00:04:4b:79:42:e1, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     host=192.168.99.2, domain=, nis-domain=(none)
+     bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
+AVDD_DSI_CSI_1V2: disabling
+VDD_PRE_REG_1V35: disabling
+VDD_CAM_HV: disabling
+VDD_TS_HV: disabling
+VDD_TS_1V8: disabling
+AVDD_SATA_HDMI_DP_1V05: disabling
+VDD_3V3_SD: disabling
+VDD_HDMI_5V0: disabling
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 1152K
+/init: line 58: chmod: command not found
+L4T-INITRD Build DATE: Mon Jan 15 05:59:42 UTC 2018
+Root device found: nfs
+Ethernet interfaces: eth0
+IP Address: 192.168.99.2
+Rootfs mounted over nfs
+Switching from initrd to actual rootfs
+systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
+systemd[1]: Detected architecture arm64.
+
+Welcome to [1mUbuntu 16.04 LTS[0m!
+
+systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Reached target Encrypted Volumes.
+Reached target Encrypted Volumes.
+systemd[1]: Listening on Syslog Socket.
+Listening on Syslog Socket.
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
+systemd[1]: Created slice System Slice.
+Created slice System Slice.
+systemd[1]: Listening on udev Control Socket.
+Listening on udev Control Socket.
+systemd[1]: Reached target Swap.
+Reached target Swap.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Dispatch Password Requests to Console Directory Watch.
+Listening on Journal Audit Socket.
+Listening on Journal Socket.
+         Mounting RPC Pipe File System...
+         Mounting Huge Pages File System...
+         Starting Create Static Device Nodes in /dev...
+         Starting Load Kernel Modules...
+         Mounting POSIX Message Queue File System...
+         Starting Remount Root and Kernel File Systems...
+         Mounting Debug File System...
+Listening on udev Kernel Socket.
+Created slice system-serial\x2dgetty.slice.
+Created slice system-getty.slice.
+Listening on /dev/initctl Compatibility Named Pipe.
+Created slice User and Session Slice.
+Reached target Slices.
+Reached target Paths.
+Listening on Journal Socket (/dev/log).
+         Starting Journal Service...
+Mounted Debug File System.
+Mounted POSIX Message Queue File System.
+Mounted Huge Pages File System.
+Mounted RPC Pipe File System.
+Started Journal Service.
+Started Create Static Device Nodes in /dev.
+Started Load Kernel Modules.
+Started Remount Root and Kernel File Systems.
+         Starting Load/Save Random Seed...
+         Starting udev Coldplug all Devices...
+         Starting Apply Kernel Variables...
+         Mounting Configuration File System...
+Reached target Local File Systems (Pre).
+Reached target Local File Systems.
+         Starting Set console keymap...
+         Starting Preprocess NFS configuration...
+         Starting udev Kernel Device Manager...
+         Starting Flush Journal to Persistent Storage...
+Mounted Configuration File System.
+Started Load/Save Random Seed.
+Started Apply Kernel Variables.
+Failed to start Set console keymap.
+See 'systemctl status console-setup.service' for details.
+Started Preprocess NFS configuration.
+Started udev Kernel Device Manager.
+systemd-journald[1550]: Received request to flush runtime journal from PID 1
+Reached target NFS client services.
+Reached target Remote File Systems (Pre).
+Reached target Remote File Systems.
+         Starting Raise network interfaces...
+Started Flush Journal to Persistent Storage.
+Started udev Coldplug all Devices.
+         Starting Create Volatile Files and Directories...
+Found device /dev/ttyS0.
+Started Create Volatile Files and Directories.
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
+Reached target System Time Synchronized.
+         Starting Update UTMP about System Boot/Shutdown...
+Started Update UTMP about System Boot/Shutdown.
+Reached target System Initialization.
+Started Daily apt activities.
+Started Daily Cleanup of Temporary Directories.
+Reached target Timers.
+Listening on D-Bus System Message Bus Socket.
+Listening on RPCbind Server Activation Socket.
+Reached target Sockets.
+Reached target Basic System.
+         Starting System Logging Service...
+Started D-Bus System Message Bus.
+         Starting Login Service...
+Started Regular background program processing daemon.
+         Starting /etc/rc.local Compatibility...
+         Starting Permit User Sessions...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting LSB: Start NTP daemon...
+         Starting OpenBSD Secure Shell server...
+Started System Logging Service.
+Started /etc/rc.local Compatibility.
+Started Permit User Sessions.
+Started Getty on tty1.
+Started Serial Getty on ttyS0.
+Reached target Login Prompts.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Login Service.
+random: crng init done
+Started OpenBSD Secure Shell server.
+Started LSB: Start NTP daemon.
+Reached target Multi-User System.
+Reached target Graphical Interface.
+         Starting Update UTMP about System Runlevel Changes...
+Started Update UTMP about System Runlevel Changes.
+

+Ubuntu 16.04 LTS tegra-ubuntu ttyS0
+
+tegra-ubuntu login: þ
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.475733475 -0800
+++ /tmp/foob	2018-01-14 22:02:46.475733475 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 21:54:12 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -22,7 +22,7 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
 random: get_random_bytes called from start_kernel+0xb0/0x414 with crng_init=0
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+percpu: Embedded 23 pages/cpu @        (ptrval) s56832 r8192 d29184 u94208
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -114,7 +114,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000b2ddf880, 1 data @ 0000000090021207)
+vdso: 2 pages (1 code @ 0000000091b48620, 1 data @ 0000000061c3dc08)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -157,7 +157,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f9000
+kvm [1]: IDMAP page: 809fa000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -271,7 +271,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-10-23 11:25:36 UTC (1003836336)
+max77686-rtc max77620-rtc: setting system clock to 2001-10-26 11:23:41 UTC (1004095421)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -282,8 +282,8 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 Freeing unused kernel memory: 1152K
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.491733549 -0800
+++ /tmp/foob	2018-01-14 22:02:46.495733568 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ################################
+	 #################################
 	 2.8 MiB/s
 done
-Bytes transferred = 8102400 (7ba200 hex)
+Bytes transferred = 8106496 (7bb200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7ba200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bb200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
+Linux version 4.15.0-rc7-next-20180115-345625-gb625c1ff8227 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 21:48:11 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -318,20 +318,20 @@
 usb1_vbus: supplied by vdd_5v_in
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+mmc1: new high speed MMC card at address 0001
 tegra-pcie 3000.pcie: 2x3 configuration
 tegra-pcie 3000.pcie: probing port 0, using 2 lanes
-mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (236:0)
-tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
@@ -378,7 +378,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x98bdd374, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x33924b39, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -404,10 +404,10 @@
 EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk1p1): recovery complete
 EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
+VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.094023] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.073603] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-14 22:02:46.511733643 -0800
+++ /tmp/foob	2018-01-14 22:02:46.511733643 -0800
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
+	 ##################################
 	 2.9 MiB/s
 done
-Bytes transferred = 6208968 (5ebdc8 hex)
+Bytes transferred = 6210600 (5ec428 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ebdc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ec428 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
+Linux version 4.15.0-rc7-next-20180115-25676-gb625c1f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 21:47:09 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x36b726e5, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x59971d3b, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.358649] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.368576] usb 2-1: new high-speed USB device number 2 using tegra-ehci
