U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6373968 (614250 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x614250 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:49:09 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 781K rwdata, 2844K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 782 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017556] Switching to timer-based delay loop, resolution 1000ns [ 0.024095] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029777] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040524] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048495] Switching to timer-based delay loop, resolution 83ns [ 0.054675] Console: colour dummy device 80x30 [ 0.058903] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069213] pid_max: default: 32768 minimum: 301 [ 0.073976] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080395] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087727] CPU: Testing write buffer coherency: ok [ 0.092407] /cpus/cpu@0 missing clock-frequency property [ 0.097559] /cpus/cpu@1 missing clock-frequency property [ 0.102854] /cpus/cpu@2 missing clock-frequency property [ 0.108132] /cpus/cpu@3 missing clock-frequency property [ 0.113414] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153458] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158113] Hierarchical SRCU implementation. [ 0.173684] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193461] smp: Bringing up secondary CPUs ... [ 0.243761] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323786] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403824] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413603] smp: Brought up 1 node, 4 CPUs [ 0.432680] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438838] CPU: All CPU(s) started in SVC mode. [ 0.444127] devtmpfs: initialized [ 0.453603] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458646] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475893] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482184] pinctrl core: initialized pinctrl subsystem [ 0.487707] NET: Registered protocol family 16 [ 0.492111] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499032] cpuidle: using governor menu [ 0.509963] No ATAGs? [ 0.510023] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518365] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525047] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532729] iommu: Adding device 50000000.host1x to group 0 [ 0.538141] iommu: Adding device 54200000.dc to group 1 [ 0.543341] iommu: Adding device 54240000.dc to group 1 [ 0.548540] iommu: Adding device 57000000.gpu to group 2 [ 0.559664] +5V_SYS: supplied by +VDD_MUX [ 0.561890] +3.3V_SYS: supplied by +VDD_MUX [ 0.566215] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571551] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579655] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585591] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593706] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599458] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607574] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613324] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621501] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628317] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636515] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642357] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650950] vgaarb: loaded [ 0.653458] SCSI subsystem initialized [ 0.660568] libata version 3.00 loaded. [ 0.662605] usbcore: registered new interface driver usbfs [ 0.667968] usbcore: registered new interface driver hub [ 0.673285] usbcore: registered new device driver usb [ 0.679499] Linux video capture interface: v2.00 [ 0.682877] pps_core: LinuxPPS API ver. 1 registered [ 0.687801] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.696904] PTP clock support registered [ 0.700943] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.708164] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714334] Advanced Linux Sound Architecture Driver Initialized. [ 0.720539] Bluetooth: Core ver 2.22 [ 0.723863] NET: Registered protocol family 31 [ 0.728273] Bluetooth: HCI device and connection manager initialized [ 0.734595] Bluetooth: HCI socket layer initialized [ 0.739452] Bluetooth: L2CAP socket layer initialized [ 0.744488] Bluetooth: SCO socket layer initialized [ 0.749571] clocksource: Switched to clocksource arch_sys_counter [ 0.786999] NET: Registered protocol family 2 [ 0.789828] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.797086] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.804132] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.810565] TCP: Hash tables configured (established 8192 bind 8192) [ 0.817001] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.822740] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.829167] NET: Registered protocol family 1 [ 0.833676] RPC: Registered named UNIX socket transport module. [ 0.839271] RPC: Registered udp transport module. [ 0.843961] RPC: Registered tcp transport module. [ 0.848631] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.855290] PCI: CLS 0 bytes, default 64 [ 0.859650] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.867751] Initialise system trusted keyrings [ 0.871596] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.878403] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.894021] NFS: Registering the id_resolver key type [ 0.897158] Key type id_resolver registered [ 0.901325] Key type id_legacy registered [ 0.906982] Key type asymmetric registered [ 0.909372] Asymmetric key parser 'x509' registered [ 0.914286] bounce: pool size: 64 pages [ 0.918066] io scheduler noop registered (default) [ 0.922812] io scheduler mq-deadline registered [ 0.927312] io scheduler kyber registered [ 0.931948] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.944438] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.950527] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.959315] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.966105] console [ttyS0] disabled [ 0.968993] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.977933] console [ttyS0] enabled [ 0.977933] console [ttyS0] enabled [ 0.984188] bootconsole [earlycon0] disabled [ 0.984188] bootconsole [earlycon0] disabled [ 1.010267] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.016743] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.024256] panel-simple panel: panel supply power not found, using dummy regulator [ 1.035710] loop: module loaded [ 1.039419] as3722 4-0040: AS3722 with revision 0x1 found [ 1.049513] as3722-sd2: supplied by +5V_SYS [ 1.053948] as3722-sd3: supplied by +5V_SYS [ 1.058284] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.064473] as3722-sd4: supplied by +5V_SYS [ 1.068809] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074567] as3722-sd5: supplied by +5V_SYS [ 1.080163] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085910] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091935] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.097560] as3722-ldo3: supplied by +3.3V_SYS [ 1.102020] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109609] as3722-ldo4: supplied by +3.3V_SYS [ 1.114204] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.120229] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.125000] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131696] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137727] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.142514] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.149065] as3722-ldo9: supplied by +5V_SYS [ 1.153646] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159856] as3722-ldo10: supplied by +5V_SYS [ 1.164367] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170819] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.193195] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207994] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213517] libphy: Fixed MDIO Bus: probed [ 1.217602] CAN device driver interface [ 1.221453] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228396] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.234010] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241441] usbcore: registered new interface driver pegasus [ 1.247107] usbcore: registered new interface driver asix [ 1.252514] usbcore: registered new interface driver ax88179_178a [ 1.258609] usbcore: registered new interface driver cdc_ether [ 1.264463] usbcore: registered new interface driver smsc75xx [ 1.270225] usbcore: registered new interface driver smsc95xx [ 1.275973] usbcore: registered new interface driver net1080 [ 1.281640] usbcore: registered new interface driver cdc_subset [ 1.287560] usbcore: registered new interface driver zaurus [ 1.293151] usbcore: registered new interface driver cdc_ncm [ 1.298885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305402] ehci-pci: EHCI PCI platform driver [ 1.309858] tegra-ehci: Tegra EHCI driver [ 1.314121] usbcore: registered new interface driver cdc_acm [ 1.319772] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327775] usbcore: registered new interface driver cdc_wdm [ 1.333449] usbcore: registered new interface driver usb-storage [ 1.340115] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359802] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366660] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373423] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380567] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386847] i2c /dev entries driver [ 1.390766] usbcore: registered new interface driver uvcvideo [ 1.396496] USB Video Class driver (1.1.1) [ 1.400589] gspca_main: v2.14.0 registered [ 1.404910] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413576] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421928] sdhci: Secure Digital Host Controller Interface driver [ 1.428091] sdhci: Copyright(c) Pierre Ossman [ 1.432447] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438214] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.452015] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.456885] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.477709] mmc0: Unknown controller version (3). You may experience problems. [ 1.484952] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.521732] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.529447] usbcore: registered new interface driver usbhid [ 1.535127] usbhid: USB HID core driver [ 1.541256] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.589504] mmc0: new high speed MMC card at address 0001 [ 1.595423] max98090 0-0010: MAX98090 REVID=0x43 [ 1.596846] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.598720] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.600628] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.604634] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.619412] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.631330] max98090 0-0010: use default 2.8v micbias [ 1.638768] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.646324] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.654263] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.662551] NET: Registered protocol family 10 [ 1.667497] Segment Routing with IPv6 [ 1.671223] mip6: Mobile IPv6 [ 1.674182] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680626] NET: Registered protocol family 17 [ 1.685062] NET: Registered protocol family 15 [ 1.689492] can: controller area network core (rev 20170425 abi 9) [ 1.695743] NET: Registered protocol family 29 [ 1.700183] can: raw protocol (rev 20170425) [ 1.704440] can: broadcast manager protocol (rev 20170425 t) [ 1.710095] can: netlink gateway (rev 20170425) max_hops=1 [ 1.715641] Bluetooth: RFCOMM socket layer initialized [ 1.720785] Bluetooth: RFCOMM ver 1.11 [ 1.724525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.729829] Bluetooth: BNEP socket layer initialized [ 1.734779] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.740690] Bluetooth: HIDP socket layer initialized [ 1.745728] Key type dns_resolver registered [ 1.750188] Registering SWP/SWPB emulation handler [ 1.755228] Loading compiled-in X.509 certificates [ 1.767088] +3.3V_RUN: supplied by +3.3V_SYS [ 1.772088] +VDD_LED: supplied by +VDD_MUX [ 1.776284] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.781956] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.786656] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791413] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.796650] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.801281] +5V_USB_HS: supplied by +5V_SYS [ 1.805597] +5V_USB_SS: supplied by +5V_SYS [ 1.810858] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816280] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821397] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.827226] +5V_HDMI_CON: supplied by +5V_SYS [ 1.832218] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.838951] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.851692] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.857904] panel-simple panel: panel supply power not found, using dummy regulator [ 1.930293] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.937690] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.943101] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.952652] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.961284] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.967667] hub 1-0:1.0: USB hub found [ 1.971451] hub 1-0:1.0: 6 ports detected [ 1.975856] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.981288] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.988968] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.997440] hub 2-0:1.0: USB hub found [ 2.001258] hub 2-0:1.0: 2 ports detected [ 2.006287] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.019836] mmc1: Unknown controller version (3). You may experience problems. [ 2.027092] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.033560] mmc1: Switching to 3.3V signalling voltage failed [ 2.062333] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.069978] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.074849] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.085142] mmc2: Unknown controller version (3). You may experience problems. [ 2.092484] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.127813] mmc1: new high speed SDIO card at address 0001 [ 2.133631] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.141220] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.147383] panel-simple panel: panel supply power not found, using dummy regulator [ 2.155516] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.162293] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.168454] panel-simple panel: panel supply power not found, using dummy regulator [ 2.176116] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.176308] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193592] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200456] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.209141] cfg80211: failed to load regulatory.db [ 2.209472] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.209484] +1.8V_RUN_CAM: disabling [ 2.214083] +1.2V_RUN_CAM_FRONT: disabling [ 2.218669] +1.05V_RUN_CAM_REAR: disabling [ 2.222336] +2.8V_RUN_TOUCH: disabling [ 2.226523] +2.8V_RUN_CAM_AF: disabling [ 2.230696] +1.8V_RUN_VPP_FUSE: disabling [ 2.234635] +VDD_LED: disabling [ 2.234639] +5V_VDD_TS_SW: disabling [ 2.234645] +3.3V_PANEL: disabling [ 2.234648] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.234651] +5V_HDMI_CON: disabling [ 2.234654] ALSA device list: [ 2.234656] #1: GoogleNyanBig [ 2.320116] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.328562] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.328771] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.329024] panel-simple panel: panel supply power not found, using dummy regulator [ 2.342821] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.380801] mmc2: new high speed SDHC card at address 0007 [ 2.388141] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.400726] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.406898] GPT:3014591 != 15564799 [ 2.410418] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.417808] GPT:3014591 != 15564799 [ 2.421298] GPT: Use GNU Parted to correct GPT errors. [ 2.426445] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.433474] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.439662] panel-simple panel: panel supply power not found, using dummy regulator [ 2.672143] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.686924] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.696415] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.702585] panel-simple panel: panel supply power not found, using dummy regulator [ 2.721223] EXT4-fs (mmcblk0p3): recovery complete [ 2.726702] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.734856] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.741501] devtmpfs: mounted [ 2.744907] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.890276] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.895961] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.901312] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.906615] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.911924] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.917228] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.922574] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.927879] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.933192] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.938493] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.089664] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.758010] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.769046] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.775238] panel-simple panel: panel supply power not found, using dummy regulator [ 4.109663] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.297955] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.304573] scsi host0: usb-storage 1-1:1.0 [ 4.309180] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.315372] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.321361] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.330064] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.336288] panel-simple panel: panel supply power not found, using dummy regulator [ 5.527297] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.535814] sd 0:0:0:0: [sda] Write Protect is off [ 5.540637] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.546654] sd 0:0:0:0: [sda] No Caching mode page found [ 5.551995] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.582098] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.596643] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 5.673248] PM: suspend entry (deep) [ 5.676819] PM: Syncing filesystems ... done. [ 5.683075] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.691232] OOM killer disabled. [ 5.694452] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.703088] Suspending console(s) (use no_console_suspend to debug) [ 5.893210] Disabling non-boot CPUs ... [ 5.949773] IRQ17 no longer affine to CPU1 [ 6.070296] Entering suspend state LP1 [ 6.070322] Enabling non-boot CPUs ... [ 6.071074] CPU1 is up [ 6.071711] CPU2 is up [ 6.072403] CPU3 is up [ 6.113398] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.125314] mmc1: Switching to 3.3V signalling voltage failed [ 6.652417] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.652586] panel-simple panel: panel supply power not found, using dummy regulator [ 6.700163] OOM killer enabled. [ 6.703304] Restarting tasks ... done. [ 6.707834] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.099195] PM: suspend entry (deep) [ 7.102785] PM: Syncing filesystems ... done. [ 7.108493] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.116576] OOM killer disabled. [ 7.119807] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.128391] Suspending console(s) (use no_console_suspend to debug) [ 7.313683] Disabling non-boot CPUs ... [ 7.470217] Entering suspend state LP1 [ 7.470242] Enabling non-boot CPUs ... [ 7.471034] CPU1 is up [ 7.471683] CPU2 is up [ 7.472395] CPU3 is up [ 7.513646] cros-ec-spi spi0.0: spi transfer failed: -121 [ 7.525905] mmc1: Switching to 3.3V signalling voltage failed [ 7.740049] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.054516] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.054683] panel-simple panel: panel supply power not found, using dummy regulator [ 8.105028] OOM killer enabled. [ 8.108169] Restarting tasks ... done. [ 8.112452] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 8.499246] PM: suspend entry (deep) [ 8.502837] PM: Syncing filesystems ... done. [ 8.508521] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.516686] OOM killer disabled. [ 8.519923] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.528520] Suspending console(s) (use no_console_suspend to debug) [ 8.713208] Disabling non-boot CPUs ... [ 8.879676] IRQ17 no longer affine to CPU3 [ 8.880269] Entering suspend state LP1 [ 8.880294] Enabling non-boot CPUs ... [ 8.881089] CPU1 is up [ 8.881754] CPU2 is up [ 8.882464] CPU3 is up [ 8.923461] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.935707] mmc1: Switching to 3.3V signalling voltage failed [ 9.465182] tegra-sor 54540000.sor: failed to probe output: -517 [ 9.465351] panel-simple panel: panel supply power not found, using dummy regulator [ 9.512925] OOM killer enabled. [ 9.516065] Restarting tasks ... done. [ 9.520464] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 9.908712] PM: suspend entry (deep) [ 9.912300] PM: Syncing filesystems ... done. [ 9.917932] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.926031] OOM killer disabled. [ 9.929247] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.937820] Suspending console(s) (use no_console_suspend to debug) [ 10.123148] Disabling non-boot CPUs ... [ 10.300145] Entering suspend state LP1 [ 10.300170] Enabling non-boot CPUs ... [ 10.300963] CPU1 is up [ 10.301607] CPU2 is up [ 10.302316] CPU3 is up [ 10.343675] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.355638] mmc1: Switching to 3.3V signalling voltage failed [ 10.569956] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.885094] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.885262] panel-simple panel: panel supply power not found, using dummy regulator [ 10.935523] OOM killer enabled. [ 10.938653] Restarting tasks ... done. [ 10.942907] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 11.328390] PM: suspend entry (deep) [ 11.331979] PM: Syncing filesystems ... done. [ 11.337522] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.345692] OOM killer disabled. [ 11.348908] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.357508] Suspending console(s) (use no_console_suspend to debug) [ 11.543555] Disabling non-boot CPUs ... [ 11.599674] IRQ17 no longer affine to CPU1 [ 11.710132] Entering suspend state LP1 [ 11.710157] Enabling non-boot CPUs ... [ 11.710954] CPU1 is up [ 11.711616] CPU2 is up [ 11.712329] CPU3 is up [ 11.753385] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.765348] mmc1: Switching to 3.3V signalling voltage failed [ 11.979976] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.295477] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.295645] panel-simple panel: panel supply power not found, using dummy regulator [ 12.350104] OOM killer enabled. [ 12.353237] Restarting tasks ... done. [ 12.357515] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 12.739376] PM: suspend entry (deep) [ 12.742969] PM: Syncing filesystems ... done. [ 12.748450] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.756620] OOM killer disabled. [ 12.759856] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.768443] Suspending console(s) (use no_console_suspend to debug) [ 12.953120] Disabling non-boot CPUs ... [ 13.110106] Entering suspend state LP1 [ 13.110132] Enabling non-boot CPUs ... [ 13.110931] CPU1 is up [ 13.111577] CPU2 is up [ 13.112289] CPU3 is up [ 13.153473] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.165658] mmc1: Switching to 3.3V signalling voltage failed [ 13.379951] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.694151] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.694321] panel-simple panel: panel supply power not found, using dummy regulator [ 13.744648] OOM killer enabled. [ 13.747789] Restarting tasks ... done. [ 13.752074] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 14.139310] PM: suspend entry (deep) [ 14.142900] PM: Syncing filesystems ... done. [ 14.148543] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.156626] OOM killer disabled. [ 14.159857] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.168435] Suspending console(s) (use no_console_suspend to debug) [ 14.352728] Disabling non-boot CPUs ... [ 14.539583] IRQ17 no longer affine to CPU3 [ 14.540100] Entering suspend state LP1 [ 14.540125] Enabling non-boot CPUs ... [ 14.540927] CPU1 is up [ 14.541570] CPU2 is up [ 14.542283] CPU3 is up [ 14.583722] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.595814] mmc1: Switching to 3.3V signalling voltage failed [ 14.809929] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.123621] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.123789] panel-simple panel: panel supply power not found, using dummy regulator [ 15.178153] OOM killer enabled. [ 15.181292] Restarting tasks ... done. [ 15.185905] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 15.568245] PM: suspend entry (deep) [ 15.571834] PM: Syncing filesystems ... done. [ 15.577388] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.585570] OOM killer disabled. [ 15.588786] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.597380] Suspending console(s) (use no_console_suspend to debug) [ 15.783127] Disabling non-boot CPUs ... [ 15.959557] IRQ17 no longer affine to CPU3 [ 15.960066] Entering suspend state LP1 [ 15.960091] Enabling non-boot CPUs ... [ 15.960891] CPU1 is up [ 15.961563] CPU2 is up [ 15.962274] CPU3 is up [ 16.003756] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.015762] mmc1: Switching to 3.3V signalling voltage failed [ 17.050077] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.050243] panel-simple panel: panel supply power not found, using dummy regulator [ 17.097741] OOM killer enabled. [ 17.100901] Restarting tasks ... done. [ 17.105220] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:10 1970 [ 17.989206] PM: suspend entry (deep) [ 17.992795] PM: Syncing filesystems ... done. [ 17.998296] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.006366] OOM killer disabled. [ 18.009597] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.018172] Suspending console(s) (use no_console_suspend to debug) [ 18.203090] Disabling non-boot CPUs ... [ 18.390036] Entering suspend state LP1 [ 18.390061] Enabling non-boot CPUs ... [ 18.390858] CPU1 is up [ 18.391534] CPU2 is up [ 18.392240] CPU3 is up [ 18.433310] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.445613] mmc1: Switching to 3.3V signalling voltage failed [ 18.974372] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.974540] panel-simple panel: panel supply power not found, using dummy regulator [ 19.017918] OOM killer enabled. [ 19.021059] Restarting tasks ... done. [ 19.025499] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:15 1970 [ 19.429206] PM: suspend entry (deep) [ 19.432805] PM: Syncing filesystems ... done. [ 19.438499] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.446670] OOM killer disabled. [ 19.449906] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.458497] Suspending console(s) (use no_console_suspend to debug) [ 19.642740] Disabling non-boot CPUs ... [ 19.819513] IRQ17 no longer affine to CPU3 [ 19.820039] Entering suspend state LP1 [ 19.820064] Enabling non-boot CPUs ... [ 19.820869] CPU1 is up [ 19.821542] CPU2 is up [ 19.822252] CPU3 is up [ 19.863455] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.875696] mmc1: Switching to 3.3V signalling voltage failed [ 20.405302] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.405470] panel-simple panel: panel supply power not found, using dummy regulator [ 20.453044] OOM killer enabled. [ 20.456185] Restarting tasks ... done. [ 20.460473] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE