Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.561882114 -0800
+++ /tmp/foob	2018-01-11 22:58:50.565882133 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Jan 10 22:40:59 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -27,7 +27,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998332K/1048576K available (9788K kernel code, 1232K rwdata, 4584K rodata, 1152K init, 404K bss, 33860K reserved, 16384K cma-reserved)
+Memory: 998332K/1048576K available (9788K kernel code, 1232K rwdata, 4588K rodata, 1152K init, 404K bss, 33860K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -68,6 +68,7 @@
 smp: Brought up 1 node, 1 CPU
 SMP: Total of 1 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -79,9 +80,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000004b6e36d, 1 data @ 000000005cc6fdb1)
+vdso: 2 pages (1 code @ 0000000007c2494b, 1 data @ 00000000a5ff44e3)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -187,9 +188,8 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-11 06:47:53 UTC (1515653273)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-12 06:02:39 UTC (1515736959)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
 Waiting for root device /dev/vda2...
-script "/home/jonathanh/workdir/tegra/epmt/test/testscripts/qemu-vexpress64_defc
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.597882279 -0800
+++ /tmp/foob	2018-01-11 22:58:50.601882296 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ################################
-	 3.2 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 8102400 (7ba200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 10 22:34:45 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992584K/2096128K available (11264K kernel code, 1563K rwdata, 4328K rodata, 2048K init, 405K bss, 38008K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992584K/2096128K available (11264K kernel code, 1563K rwdata, 4332K rodata, 2048K init, 405K bss, 38008K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -328,13 +328,13 @@
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  mmcblk0: p1 p2 p3
-[drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+[drm] No driver support for vblank timestamp query.
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
@@ -355,7 +355,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-03 13:39:16 UTC (960039556)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-04 12:54:18 UTC (960123258)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -367,4 +367,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.759264] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.759427] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.629882425 -0800
+++ /tmp/foob	2018-01-11 22:58:50.633882442 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.3 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 6208520 (5ebc08 hex)
+Bytes transferred = 6208968 (5ebdc8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.3 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ebc08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ebdc8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:32:58 PST 2018
+Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -343,7 +343,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-03 13:36:32 UTC (960039392)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-04 12:51:47 UTC (960123107)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -361,5 +361,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.376760] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.653882534 -0800
+++ /tmp/foob	2018-01-11 22:58:50.657882552 -0800
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ################################
-	 3.8 MiB/s
+	 3.9 MiB/s
 done
 Bytes transferred = 8102400 (7ba200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -43,8 +43,8 @@
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
-Loading: *#####
-	 2.4 MiB/s
+Loading: *T ######
+	 12.7 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 10 22:34:45 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992476K/2096128K available (11264K kernel code, 1563K rwdata, 4328K rodata, 2048K init, 405K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992476K/2096128K available (11264K kernel code, 1563K rwdata, 4332K rodata, 2048K init, 405K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -325,13 +325,14 @@
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
 +3.3V_LP0: supplied by +3.3V_SYS
-+5V_HDMI_CON: supplied by +5V_SYS
-+5V_SATA: supplied by +5V_SYS
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
+ mmcblk0: p1
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
@@ -339,7 +340,6 @@
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
- mmcblk0: p1
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
@@ -445,7 +445,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x457dfea7, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xbd7fb557, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -457,7 +457,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:41 UTC (946685081)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:16 UTC (946685056)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.661882571 -0800
+++ /tmp/foob	2018-01-11 22:58:50.665882588 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 4 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6208520 (5ebc08 hex)
+Bytes transferred = 6208968 (5ebdc8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ebc08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ebdc8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:32:58 PST 2018
+Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -438,7 +438,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x0bf332d8, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x7a74b42d, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.673882625 -0800
+++ /tmp/foob	2018-01-11 22:58:50.677882644 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #############################################
-	 3.6 MiB/s
+	 3.7 MiB/s
 done
-Bytes transferred = 6372016 (613ab0 hex)
+Bytes transferred = 6373968 (614250 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x613ab0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x614250 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-226631-g8418f8876 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:33:38 PST 2018
+Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:49:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997468K/2096128K available (9216K kernel code, 781K rwdata, 2840K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997468K/2096128K available (9216K kernel code, 781K rwdata, 2844K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -382,8 +382,8 @@
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
@@ -421,6 +421,7 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -445,19 +446,22 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x6ae98ec4, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xc83ef849, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:26 UTC (946684946)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:57 UTC (946684917)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -469,18 +473,13 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 cfg80211: failed to load regulatory.db
- mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.693882717 -0800
+++ /tmp/foob	2018-01-11 22:58:50.693882717 -0800
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ################################
-	 2.9 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 8102400 (7ba200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 10 22:34:45 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993492K/2097148K available (11264K kernel code, 1563K rwdata, 4328K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993492K/2097148K available (11264K kernel code, 1563K rwdata, 4332K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -325,11 +325,18 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 +5V_VDD_TS_SW: supplied by +5V_SYS
@@ -338,6 +345,7 @@
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
@@ -347,24 +355,20 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
+elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-04 07:27:15 UTC (946970835)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -372,7 +376,6 @@
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
-mmc1: new high speed SDIO card at address 0001
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +VDD_LED: disabling
@@ -382,6 +385,8 @@
 +3.3V_PANEL: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -392,11 +397,6 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-[ pad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
-EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.717882826 -0800
+++ /tmp/foob	2018-01-11 22:58:50.717882826 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6208520 (5ebc08 hex)
+Bytes transferred = 6208968 (5ebdc8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ebc08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ebdc8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:32:58 PST 2018
+Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -360,10 +360,11 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-04 07:26:01 UTC (946970761)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -380,12 +381,11 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
-cfg80211: failed to load regulatory.db
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 tegra-sor 54540000.sor: failed to probe output: -517
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 panel-simple panel: panel supply power not found, using dummy regulator
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.741882936 -0800
+++ /tmp/foob	2018-01-11 22:58:50.745882953 -0800
@@ -43,18 +43,18 @@
 	 #############################################
 	 2.8 MiB/s
 done
-Bytes transferred = 6372016 (613ab0 hex)
+Bytes transferred = 6373968 (614250 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x613ab0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x614250 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-226631-g8418f8876 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:33:38 PST 2018
+Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:49:09 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998488K/2097148K available (9216K kernel code, 781K rwdata, 2840K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1998488K/2097148K available (9216K kernel code, 781K rwdata, 2844K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -368,7 +368,7 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-04 07:26:39 UTC (946970799)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -402,25 +402,25 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-alloc_contig_range: [fbc77, fbc78) PFNs busy
-alloc_contig_range: [fbc78, fbc79) PFNs busy
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.908510] alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
-alloc_contig_range: [fbc7a, fbc7b) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
 alloc_contig_range: [fbc7d, fbc7e) PFNs busy
 alloc_contig_range: [fbc7e, fbc7f) PFNs busy
-bash: cannot set terminal process group [    2.630312] alloc_contig_range: [fbc7f, fbc80) PFNs busy
-(-1): Inappropriate ioctl for device
-ba[    2.639300] alloc_contig_range: [fbca1, fbca2) PFNs busy
-sh: no job control in this shell
-root@(none):/# [    2.721983] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
+alloc_contig_range: [fbc7f, fbc80) PFNs busy
+alloc_contig_range: [fbca1, fbca2) PFNs busy
+alloc_contig_range: [fbca2, fbca3) PFNs busy
+alloc_contig_range: [fbca3, fbca4) PFNs busy
 usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.769883063 -0800
+++ /tmp/foob	2018-01-11 22:58:50.773883081 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801221 us
+Bootloader-Cpu Init at (time stamp): 1801705 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801195  us
-Bootloader (AosInit) time: 735167 us
-Bootloader Main Init time: 180248 us
-BlockDevMgrInit time: 157527 us
+Miscellaneous avp time: 1801679  us
+Bootloader (AosInit) time: 733439 us
+Bootloader Main Init time: 180288 us
+BlockDevMgrInit time: 157497 us
 PartMgrInit time: 8 us
-StorMgrInit time: 31 us
+StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76623 us 
-Display init time: 574946 us
-Kernel read time: 1561 msec
+Partition Table load: 77138 us 
+Display init time: 574521 us
+Kernel read time: 1562 msec
 Load Kernel Size:   20686848 Bytes
-Bl Kernel ReadSpeed: 13252000 Bytes/sec
-Pre-Kernel Jump time: 4371950 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9552914 us
+Bl Kernel ReadSpeed: 13243000 Bytes/sec
+Pre-Kernel Jump time: 4371749 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9553924 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Jan 10 22:40:59 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -101,7 +101,7 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1705448K/1775616K available (9788K kernel code, 1232K rwdata, 4584K rodata, 1152K init, 404K bss, 53784K reserved, 16384K cma-reserved)
+Memory: 1705448K/1775616K available (9788K kernel code, 1232K rwdata, 4588K rodata, 1152K init, 404K bss, 53784K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -143,7 +143,9 @@
 smp: Brought up 1 node, 1 CPU
 SMP: Total of 1 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL1
+alternatives: patching kernel code
 devtmpfs: initialized
 Built 1 zonelists, mobility grouping on.  Total pages: 430458
 Policy zone: DMA
@@ -153,9 +155,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000a7eb1d94, 1 data @ 000000005ce86ea1)
+vdso: 2 pages (1 code @ 000000002a0ee200, 1 data @ 00000000f3656952)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.825883319 -0800
+++ /tmp/foob	2018-01-11 22:58:50.829883337 -0800
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ################################
-	 3.7 MiB/s
+	 3.9 MiB/s
 done
 Bytes transferred = 8102400 (7ba200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -57,7 +57,7 @@
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 10 22:34:45 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -91,7 +91,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953408K/1048576K available (11264K kernel code, 1563K rwdata, 4328K rodata, 2048K init, 405K bss, 29632K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953408K/1048576K available (11264K kernel code, 1563K rwdata, 4332K rodata, 2048K init, 405K bss, 29632K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -272,7 +272,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x48c6fd8c, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x938753e2, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -351,9 +351,9 @@
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 hub 2-0:1.0: USB hub found
- mmcblk1: p1 p2
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+ mmcblk1: p1 p2
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.833883356 -0800
+++ /tmp/foob	2018-01-11 22:58:50.837883373 -0800
@@ -46,9 +46,9 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 4.1 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6208520 (5ebc08 hex)
+Bytes transferred = 6208968 (5ebdc8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ebc08 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ebdc8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024104b5
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:32:58 PST 2018
+Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -261,7 +261,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xe2640b30, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x1e0a76be, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -339,8 +339,8 @@
 tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
- mmcblk1: p1 p2
 hub 2-0:1.0: USB hub found
+ mmcblk1: p1 p2
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.865883502 -0800
+++ /tmp/foob	2018-01-11 22:58:50.865883502 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 730965 us
-Basic modules init took 349129 us
-Sec Bootdevice Read Time = 205 ms, Read Size = 8459 KB
-Next stage binary read took 16469 us
-Carveout took 253352 us
-CPU initialization took 92442 us
-Total time taken by TegraBoot 711392 us
+Tegraboot started after 738153 us
+Basic modules init took 348530 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14370 us
+Carveout took 252698 us
+CPU initialization took 92446 us
+Total time taken by TegraBoot 708044 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.573] LPDDR4 Training: Number of tables = 10
+64b[0001.577] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,7 +117,7 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17318400 bytes read in 869 ms (19 MiB/s)
+17318400 bytes read in 879 ms (18.8 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Jan 10 22:37:14 PST 2018
+Linux version 4.15.0-rc7-next-20180112-226908-g3e53c74 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:53:45 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981828K/3131392K available (9788K kernel code, 1232K rwdata, 4720K rodata, 1152K init, 404K bss, 133180K reserved, 16384K cma-reserved)
+Memory: 2981828K/3131392K available (9788K kernel code, 1232K rwdata, 4724K rodata, 1152K init, 404K bss, 133180K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -224,6 +224,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -235,9 +236,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000d0e48c1f, 1 data @ 000000008570158f)
+vdso: 2 pages (1 code @ 000000003278d9da, 1 data @ 00000000a52ab694)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -273,7 +274,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809fd000
+kvm [1]: IDMAP page: 80a00000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.885883592 -0800
+++ /tmp/foob	2018-01-11 22:58:50.885883592 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 765126 us
-Basic modules init took 348266 us
+Tegraboot started after 757912 us
+Basic modules init took 348772 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14788 us
-Carveout took 252694 us
-CPU initialization took 92440 us
-Total time taken by TegraBoot 708188 us
+Next stage binary read took 14344 us
+Carveout took 252667 us
+CPU initialization took 92974 us
+Total time taken by TegraBoot 708757 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.603] LPDDR4 Training: Number of tables = 10
+64b[0001.597] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17187328 bytes read in 855 ms (19.2 MiB/s)
+17187328 bytes read in 858 ms (19.1 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Jan 10 22:40:59 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981956K/3131392K available (9788K kernel code, 1232K rwdata, 4584K rodata, 1152K init, 404K bss, 133052K reserved, 16384K cma-reserved)
+Memory: 2981956K/3131392K available (9788K kernel code, 1232K rwdata, 4588K rodata, 1152K init, 404K bss, 133052K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -224,6 +224,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -235,9 +236,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000835e968b, 1 data @ 000000003fe72447)
+vdso: 2 pages (1 code @ 00000000bff62319, 1 data @ 00000000dd18e0fb)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -273,7 +274,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f5000
+kvm [1]: IDMAP page: 809f9000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -350,6 +351,7 @@
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
   No soundcards found.
+Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.901883665 -0800
+++ /tmp/foob	2018-01-11 22:58:50.901883665 -0800
@@ -1,25 +0,0 @@
-
-
-Pass: Linux Boot Test 1
-	Test Owner(s): N/A
-	Execution Time 56.39 sec
-	Percent passed so far: 50.0
-	
-
-
-Pass: Linux Boot Test 2
-	Test Owner(s): N/A
-	Execution Time 55.87 sec
-	Percent passed so far: 100.0
-	
-
-Final Score: 100.0
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
-<html><head>
-<title>404 Not Found</title>
-</head><body>
-<h1>Not Found</h1>
-<p>The requested URL /jobs/302458/302458413/uart_log.txt was not found on this server.</p>
-<hr>
-<address>Apache/2.2.3 (CentOS) Server at ausvrldsk.nvidia.com Port 80</address>
-</body></html>
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.921883757 -0800
+++ /tmp/foob	2018-01-11 22:58:50.925883775 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Jan 10 22:40:59 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Jan 11 21:55:24 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -30,7 +30,7 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835104K/2988032K available (9788K kernel code, 1232K rwdata, 4584K rodata, 1152K init, 404K bss, 136544K reserved, 16384K cma-reserved)
+Memory: 2835104K/2988032K available (9788K kernel code, 1232K rwdata, 4588K rodata, 1152K init, 404K bss, 136544K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -100,6 +100,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -113,7 +114,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000bc975dc0, 1 data @ 0000000024cf6b94)
+vdso: 2 pages (1 code @ 00000000b2ddf880, 1 data @ 0000000090021207)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -156,7 +157,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f5000
+kvm [1]: IDMAP page: 809f9000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -270,7 +271,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-10-22 12:10:31 UTC (1003752631)
+max77686-rtc max77620-rtc: setting system clock to 2001-10-23 11:25:36 UTC (1003836336)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -281,8 +282,8 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-Freeing unused kernel memory: 1152K
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+Freeing unused kernel memory: 1152K
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.937883830 -0800
+++ /tmp/foob	2018-01-11 22:58:50.941883848 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ################################
-	 3.3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8102400 (7ba200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.5 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-344872-g8418f8876404 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Jan 10 22:34:45 PST 2018
+Linux version 4.15.0-rc7-next-20180112-345149-g3e53c7415294 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Jan 11 21:49:35 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992512K/2096128K available (11264K kernel code, 1563K rwdata, 4328K rodata, 2048K init, 405K bss, 38080K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992512K/2096128K available (11264K kernel code, 1563K rwdata, 4332K rodata, 2048K init, 405K bss, 38080K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -318,21 +318,21 @@
 usb1_vbus: supplied by vdd_5v_in
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie: 2x3 configuration
+tegra-pcie 3000.pcie: probing port 0, using 2 lanes
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (236:0)
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
  mmcblk0: p1 p2 p3
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie: 2x3 configuration
-tegra-pcie 3000.pcie: probing port 0, using 2 lanes
-tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
 tegra-pcie 3000.pcie: link 2 down, retrying
@@ -378,7 +378,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x572aae1f, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x98bdd374, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -409,5 +409,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.144027] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.094023] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-11 22:58:50.953883903 -0800
+++ /tmp/foob	2018-01-11 22:58:50.957883921 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.4 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 6208520 (5ebc08 hex)
+Bytes transferred = 6208968 (5ebdc8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ebc08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ebdc8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc7-next-20180111-24923-g8418f8876 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 10 22:32:58 PST 2018
+Linux version 4.15.0-rc7-next-20180112-25200-g3e53c74 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 11 21:48:59 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -366,7 +366,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x60f6ced9, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x36b726e5, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -403,4 +403,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.358579] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.358649] usb 2-1: new high-speed USB device number 2 using tegra-ehci
