U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.1 MiB/s done Bytes transferred = 6367496 (612908 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x612908 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180105-224881-g990b6a0 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 4 21:50:17 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 781K rwdata, 2840K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 782 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008017] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017549] Switching to timer-based delay loop, resolution 1000ns [ 0.024084] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029770] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040517] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048488] Switching to timer-based delay loop, resolution 83ns [ 0.054658] Console: colour dummy device 80x30 [ 0.058897] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069206] pid_max: default: 32768 minimum: 301 [ 0.073970] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080388] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087726] CPU: Testing write buffer coherency: ok [ 0.092401] /cpus/cpu@0 missing clock-frequency property [ 0.097552] /cpus/cpu@1 missing clock-frequency property [ 0.102848] /cpus/cpu@2 missing clock-frequency property [ 0.108125] /cpus/cpu@3 missing clock-frequency property [ 0.113408] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153450] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158106] Hierarchical SRCU implementation. [ 0.173668] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193453] smp: Bringing up secondary CPUs ... [ 0.243751] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403819] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413597] smp: Brought up 1 node, 4 CPUs [ 0.432675] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438833] CPU: All CPU(s) started in SVC mode. [ 0.444122] devtmpfs: initialized [ 0.453564] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458613] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466249] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475853] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482134] pinctrl core: initialized pinctrl subsystem [ 0.487669] NET: Registered protocol family 16 [ 0.492069] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498984] cpuidle: using governor menu [ 0.509875] No ATAGs? [ 0.509935] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518279] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524956] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532641] iommu: Adding device 50000000.host1x to group 0 [ 0.538051] iommu: Adding device 54200000.dc to group 1 [ 0.543253] iommu: Adding device 54240000.dc to group 1 [ 0.548453] iommu: Adding device 57000000.gpu to group 2 [ 0.559481] +5V_SYS: supplied by +VDD_MUX [ 0.561707] +3.3V_SYS: supplied by +VDD_MUX [ 0.566030] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571367] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579470] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585407] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593520] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599273] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607402] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613140] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621312] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628133] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636330] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642173] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650764] vgaarb: loaded [ 0.653273] SCSI subsystem initialized [ 0.660384] libata version 3.00 loaded. [ 0.662419] usbcore: registered new interface driver usbfs [ 0.667784] usbcore: registered new interface driver hub [ 0.673100] usbcore: registered new device driver usb [ 0.679302] Linux video capture interface: v2.00 [ 0.682691] pps_core: LinuxPPS API ver. 1 registered [ 0.687617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.696720] PTP clock support registered [ 0.700758] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.707979] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714151] Advanced Linux Sound Architecture Driver Initialized. [ 0.720356] Bluetooth: Core ver 2.22 [ 0.723679] NET: Registered protocol family 31 [ 0.728088] Bluetooth: HCI device and connection manager initialized [ 0.734411] Bluetooth: HCI socket layer initialized [ 0.739268] Bluetooth: L2CAP socket layer initialized [ 0.744304] Bluetooth: SCO socket layer initialized [ 0.749385] clocksource: Switched to clocksource arch_sys_counter [ 0.787762] NET: Registered protocol family 2 [ 0.790580] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.797850] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.804895] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.811328] TCP: Hash tables configured (established 8192 bind 8192) [ 0.817760] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.823504] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.829939] NET: Registered protocol family 1 [ 0.834431] RPC: Registered named UNIX socket transport module. [ 0.840045] RPC: Registered udp transport module. [ 0.844714] RPC: Registered tcp transport module. [ 0.849402] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.856044] PCI: CLS 0 bytes, default 64 [ 0.860415] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.868499] Initialise system trusted keyrings [ 0.872362] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.879165] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.894792] NFS: Registering the id_resolver key type [ 0.897928] Key type id_resolver registered [ 0.902097] Key type id_legacy registered [ 0.907758] Key type asymmetric registered [ 0.910153] Asymmetric key parser 'x509' registered [ 0.915045] bounce: pool size: 64 pages [ 0.918831] io scheduler noop registered (default) [ 0.923583] io scheduler mq-deadline registered [ 0.928082] io scheduler kyber registered [ 0.932716] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.945179] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.951274] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.960065] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.966834] console [ttyS0] disabled [ 0.969746] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.978663] console [ttyS0] enabled [ 0.978663] console [ttyS0] enabled [ 0.984926] bootconsole [earlycon0] disabled [ 0.984926] bootconsole [earlycon0] disabled [ 1.010992] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.017464] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.024975] panel-simple panel: panel supply power not found, using dummy regulator [ 1.036438] loop: module loaded [ 1.040159] as3722 4-0040: AS3722 with revision 0x1 found [ 1.050212] as3722-sd2: supplied by +5V_SYS [ 1.054631] as3722-sd3: supplied by +5V_SYS [ 1.058966] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.065155] as3722-sd4: supplied by +5V_SYS [ 1.069494] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.075238] as3722-sd5: supplied by +5V_SYS [ 1.080845] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.086590] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.092614] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.098236] as3722-ldo3: supplied by +3.3V_SYS [ 1.102696] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.110280] as3722-ldo4: supplied by +3.3V_SYS [ 1.114875] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.120900] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.125673] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.132366] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.138398] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.143180] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.149740] as3722-ldo9: supplied by +5V_SYS [ 1.154308] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.160516] as3722-ldo10: supplied by +5V_SYS [ 1.165028] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.171477] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.193838] cros-ec-spi spi0.0: Chrome EC device registered [ 1.208547] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.214077] libphy: Fixed MDIO Bus: probed [ 1.218162] CAN device driver interface [ 1.222014] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228958] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.234570] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.242006] usbcore: registered new interface driver pegasus [ 1.247673] usbcore: registered new interface driver asix [ 1.253081] usbcore: registered new interface driver ax88179_178a [ 1.259175] usbcore: registered new interface driver cdc_ether [ 1.265023] usbcore: registered new interface driver smsc75xx [ 1.270783] usbcore: registered new interface driver smsc95xx [ 1.276531] usbcore: registered new interface driver net1080 [ 1.282198] usbcore: registered new interface driver cdc_subset [ 1.288118] usbcore: registered new interface driver zaurus [ 1.293708] usbcore: registered new interface driver cdc_ncm [ 1.299450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305960] ehci-pci: EHCI PCI platform driver [ 1.310418] tegra-ehci: Tegra EHCI driver [ 1.314681] usbcore: registered new interface driver cdc_acm [ 1.320331] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.328334] usbcore: registered new interface driver cdc_wdm [ 1.334014] usbcore: registered new interface driver usb-storage [ 1.340678] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.360338] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.367196] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373955] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.381100] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.387379] i2c /dev entries driver [ 1.391297] usbcore: registered new interface driver uvcvideo [ 1.397027] USB Video Class driver (1.1.1) [ 1.401119] gspca_main: v2.14.0 registered [ 1.405438] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.414089] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.422438] sdhci: Secure Digital Host Controller Interface driver [ 1.428602] sdhci: Copyright(c) Pierre Ossman [ 1.432959] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438729] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.452528] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.457399] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.477521] mmc0: Unknown controller version (3). You may experience problems. [ 1.484765] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.521547] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.529258] usbcore: registered new interface driver usbhid [ 1.534938] usbhid: USB HID core driver [ 1.541042] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.589311] mmc0: new high speed MMC card at address 0001 [ 1.595232] max98090 0-0010: MAX98090 REVID=0x43 [ 1.596643] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.598500] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.600398] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.604441] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.619198] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.631135] max98090 0-0010: use default 2.8v micbias [ 1.638569] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.646081] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.654020] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.662307] NET: Registered protocol family 10 [ 1.667259] Segment Routing with IPv6 [ 1.670988] mip6: Mobile IPv6 [ 1.673947] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680390] NET: Registered protocol family 17 [ 1.684828] NET: Registered protocol family 15 [ 1.689258] can: controller area network core (rev 20170425 abi 9) [ 1.695507] NET: Registered protocol family 29 [ 1.699946] can: raw protocol (rev 20170425) [ 1.704203] can: broadcast manager protocol (rev 20170425 t) [ 1.709859] can: netlink gateway (rev 20170425) max_hops=1 [ 1.715404] Bluetooth: RFCOMM socket layer initialized [ 1.720546] Bluetooth: RFCOMM ver 1.11 [ 1.724288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.729592] Bluetooth: BNEP socket layer initialized [ 1.734542] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.740453] Bluetooth: HIDP socket layer initialized [ 1.745493] Key type dns_resolver registered [ 1.749951] Registering SWP/SWPB emulation handler [ 1.754991] Loading compiled-in X.509 certificates [ 1.766970] +3.3V_RUN: supplied by +3.3V_SYS [ 1.771965] +VDD_LED: supplied by +VDD_MUX [ 1.776160] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.781830] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.786535] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791294] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.796531] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.801163] +5V_USB_HS: supplied by +5V_SYS [ 1.805478] +5V_USB_SS: supplied by +5V_SYS [ 1.810786] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816096] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821124] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.826950] +5V_HDMI_CON: supplied by +5V_SYS [ 1.831946] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.838677] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.851520] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.857731] panel-simple panel: panel supply power not found, using dummy regulator [ 1.930118] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.937513] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.942949] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.952481] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.961109] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.967487] hub 1-0:1.0: USB hub found [ 1.971312] hub 1-0:1.0: 6 ports detected [ 1.975679] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.981083] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.988748] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.997236] hub 2-0:1.0: USB hub found [ 2.001047] hub 2-0:1.0: 2 ports detected [ 2.006081] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.019610] mmc1: Unknown controller version (3). You may experience problems. [ 2.026853] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.033335] mmc1: Switching to 3.3V signalling voltage failed [ 2.062129] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.069770] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.074641] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.084959] mmc2: Unknown controller version (3). You may experience problems. [ 2.092296] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.127173] mmc1: new high speed SDIO card at address 0001 [ 2.132981] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.140585] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.146750] panel-simple panel: panel supply power not found, using dummy regulator [ 2.154883] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.161501] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.167724] panel-simple panel: panel supply power not found, using dummy regulator [ 2.175679] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 19:03:03 UTC (946753383) [ 2.184442] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.196219] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.203012] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.205451] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.205463] +1.8V_RUN_CAM: disabling [ 2.205610] +1.2V_RUN_CAM_FRONT: disabling [ 2.205737] +1.05V_RUN_CAM_REAR: disabling [ 2.205859] +2.8V_RUN_TOUCH: disabling [ 2.205983] +2.8V_RUN_CAM_AF: disabling [ 2.206105] +1.8V_RUN_VPP_FUSE: disabling [ 2.206226] +VDD_LED: disabling [ 2.206229] +5V_VDD_TS_SW: disabling [ 2.206236] +3.3V_PANEL: disabling [ 2.206239] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.206241] +5V_HDMI_CON: disabling [ 2.206244] ALSA device list: [ 2.206246] #1: GoogleNyanBig [ 2.263794] cfg80211: failed to load regulatory.db [ 2.319924] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.325973] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.334338] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.339443] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.350299] panel-simple panel: panel supply power not found, using dummy regulator [ 2.366567] mmc2: new high speed SDHC card at address 0007 [ 2.373975] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.387481] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.393691] GPT:3014591 != 15564799 [ 2.397177] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.404586] GPT:3014591 != 15564799 [ 2.408064] GPT: Use GNU Parted to correct GPT errors. [ 2.413250] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.420407] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.426571] panel-simple panel: panel supply power not found, using dummy regulator [ 2.493441] EXT4-fs (mmcblk0p3): recovery complete [ 2.501552] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.509697] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.516288] devtmpfs: mounted [ 2.519714] Freeing unused kernel memory: 1024K [ 2.598301] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.604273] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.609947] alloc_contig_range: [fbc79, fbc7a) PFNs busy bash: cannot set terminal process group [ 2.615579] alloc_contig_range: [fbc7a, fbc7b) PFNs busy (-1): Inappropriate ioctl for de[ 2.624309] alloc_contig_range: [fbc7b, fbc7c) PFNs busy vice bash: no job control in this shell[ 2.632624] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.641054] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.646518] alloc_contig_range: [fbc7e, fbc7f) PFNs busy root@(none):/# [ 2.652104] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.658516] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.737942] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.752711] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.762264] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.768424] panel-simple panel: panel supply power not found, using dummy regulator [ 3.109476] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.779190] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.790178] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.796336] panel-simple panel: panel supply power not found, using dummy regulator [ 4.139476] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.327780] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.334358] scsi host0: usb-storage 1-1:1.0 [ 4.338965] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.345158] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.401218] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.409961] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.416183] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 [ 5.607563] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.616702] sd 0:0:0:0: [sda] Write Protect is off rtcwake: assuming RTC uses UTC .[ 5.621515] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 .. [ 5.630618] sd 0:0:0:0: [sda] No Caching mode page found rtcwake: wakeup [ 5.635930] sd 0:0:0:0: [sda] Assuming drive cache: write through from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.664324] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.675454] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.678802] PM: suspend entry (deep) [ 5.678804] PM: Syncing filesystems ... done. [ 5.689316] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.697450] OOM killer disabled. [ 5.700708] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.709306] Suspending console(s) (use no_console_suspend to debug) [ 5.903098] Disabling non-boot CPUs ... [ 5.959586] IRQ17 no longer affine to CPU1 [ 6.070200] Entering suspend state LP1 [ 6.070226] Enabling non-boot CPUs ... [ 6.070988] CPU1 is up [ 6.071635] CPU2 is up [ 6.072328] CPU3 is up [ 6.113271] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.125271] mmc1: Switching to 3.3V signalling voltage failed [ 6.340037] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.670341] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.670564] panel-simple panel: panel supply power not found, using dummy regulator [ 6.707210] OOM killer enabled. [ 6.710387] Restarting tasks ... done. [ 6.714867] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.828146] PM: suspend entry (deep) [ 7.831734] PM: Syncing filesystems ... done. [ 7.837286] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.845463] OOM killer disabled. [ 7.848679] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.857290] Suspending console(s) (use no_console_suspend to debug) [ 8.043026] Disabling non-boot CPUs ... [ 8.210045] Entering suspend state LP1 [ 8.210070] Enabling non-boot CPUs ... [ 8.210873] CPU1 is up [ 8.211535] CPU2 is up [ 8.212240] CPU3 is up [ 8.253511] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.265592] mmc1: Switching to 3.3V signalling voltage failed [ 8.479856] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.794710] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.794880] panel-simple panel: panel supply power not found, using dummy regulator [ 8.845186] OOM killer enabled. [ 8.848326] Restarting tasks ... done. [ 8.852924] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.967985] PM: suspend entry (deep) [ 9.971572] PM: Syncing filesystems ... done. [ 9.977037] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.985121] OOM killer disabled. [ 9.988336] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.996920] Suspending console(s) (use no_console_suspend to debug) [ 10.183173] Disabling non-boot CPUs ... [ 10.360017] Entering suspend state LP1 [ 10.360042] Enabling non-boot CPUs ... [ 10.360836] CPU1 is up [ 10.361500] CPU2 is up [ 10.362203] CPU3 is up [ 10.403263] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.415061] mmc1: Switching to 3.3V signalling voltage failed [ 10.944114] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.944284] panel-simple panel: panel supply power not found, using dummy regulator [ 10.987657] OOM killer enabled. [ 10.990798] Restarting tasks ... done. [ 10.995011] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.118395] PM: suspend entry (deep) [ 12.121985] PM: Syncing filesystems ... done. [ 12.127665] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.135843] OOM killer disabled. [ 12.139059] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.147650] Suspending console(s) (use no_console_suspend to debug) [ 12.332534] Disabling non-boot CPUs ... [ 12.439492] IRQ17 no longer affine to CPU2 [ 12.499975] Entering suspend state LP1 [ 12.500000] Enabling non-boot CPUs ... [ 12.500793] CPU1 is up [ 12.501457] CPU2 is up [ 12.502165] CPU3 is up [ 12.543132] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.555054] mmc1: Switching to 3.3V signalling voltage failed [ 12.769786] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.084359] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.084529] panel-simple panel: panel supply power not found, using dummy regulator [ 13.138953] OOM killer enabled. [ 13.142116] Restarting tasks ... done. [ 13.146590] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.267572] PM: suspend entry (deep) [ 14.271159] PM: Syncing filesystems ... done. [ 14.276612] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.284695] OOM killer disabled. [ 14.287911] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.296507] Suspending console(s) (use no_console_suspend to debug) [ 14.482963] Disabling non-boot CPUs ... [ 14.629966] Entering suspend state LP1 [ 14.629991] Enabling non-boot CPUs ... [ 14.630794] CPU1 is up [ 14.631456] CPU2 is up [ 14.632157] CPU3 is up [ 14.673349] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.685466] mmc1: Switching to 3.3V signalling voltage failed [ 14.899786] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.214401] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.214572] panel-simple panel: panel supply power not found, using dummy regulator [ 15.264933] OOM killer enabled. [ 15.268063] Restarting tasks ... done. [ 15.272282] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.397210] PM: suspend entry (deep) [ 16.400786] PM: Syncing filesystems ... done. [ 16.406250] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.414335] OOM killer disabled. [ 16.417551] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.426152] Suspending console(s) (use no_console_suspend to debug) [ 16.613095] Disabling non-boot CPUs ... [ 16.779918] Entering suspend state LP1 [ 16.779944] Enabling non-boot CPUs ... [ 16.780738] CPU1 is up [ 16.781408] CPU2 is up [ 16.782113] CPU3 is up [ 16.823325] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.835457] mmc1: Switching to 3.3V signalling voltage failed [ 17.049742] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.362683] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.362854] panel-simple panel: panel supply power not found, using dummy regulator [ 17.413195] OOM killer enabled. [ 17.416336] Restarting tasks ... done. [ 17.420772] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.547185] PM: suspend entry (deep) [ 18.550762] PM: Syncing filesystems ... done. [ 18.556229] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.564314] OOM killer disabled. [ 18.567530] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.576133] Suspending console(s) (use no_console_suspend to debug) [ 18.762919] Disabling non-boot CPUs ... [ 18.929393] IRQ17 no longer affine to CPU3 [ 18.929903] Entering suspend state LP1 [ 18.929928] Enabling non-boot CPUs ... [ 18.930730] CPU1 is up [ 18.931395] CPU2 is up [ 18.932105] CPU3 is up [ 18.973224] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.985306] mmc1: Switching to 3.3V signalling voltage failed [ 19.199699] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 19.514359] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.514528] panel-simple panel: panel supply power not found, using dummy regulator [ 19.568952] OOM killer enabled. [ 19.572115] Restarting tasks ... done. [ 19.576315] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.697147] PM: suspend entry (deep) [ 20.700730] PM: Syncing filesystems ... done. [ 20.706204] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.714289] OOM killer disabled. [ 20.717505] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.726109] Suspending console(s) (use no_console_suspend to debug) [ 20.912605] Disabling non-boot CPUs ... [ 21.079881] Entering suspend state LP1 [ 21.079906] Enabling non-boot CPUs ... [ 21.080700] CPU1 is up [ 21.081366] CPU2 is up [ 21.082073] CPU3 is up [ 21.123278] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.135111] mmc1: Switching to 3.3V signalling voltage failed [ 21.349687] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.662938] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.663107] panel-simple panel: panel supply power not found, using dummy regulator [ 21.713353] OOM killer enabled. [ 21.716482] Restarting tasks ... done. [ 21.720760] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.848767] PM: suspend entry (deep) [ 22.852356] PM: Syncing filesystems ... done. [ 22.858075] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.866245] OOM killer disabled. [ 22.869482] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.878072] Suspending console(s) (use no_console_suspend to debug) [ 23.063031] Disabling non-boot CPUs ... [ 23.179369] IRQ17 no longer affine to CPU2 [ 23.239971] Entering suspend state LP1 [ 23.239996] Enabling non-boot CPUs ... [ 23.240794] CPU1 is up [ 23.241458] CPU2 is up [ 23.242164] CPU3 is up [ 23.283209] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.295336] mmc1: Switching to 3.3V signalling voltage failed [ 23.825024] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.825192] panel-simple panel: panel supply power not found, using dummy regulator [ 23.872738] OOM killer enabled. [ 23.875875] Restarting tasks ... done. [ 23.880280] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 25.007114] PM: suspend entry (deep) [ 25.010691] PM: Syncing filesystems ... done. [ 25.016163] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.024347] OOM killer disabled. [ 25.027563] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.036178] Suspending console(s) (use no_console_suspend to debug) [ 25.222840] Disabling non-boot CPUs ... [ 25.379881] Entering suspend state LP1 [ 25.379907] Enabling non-boot CPUs ... [ 25.380709] CPU1 is up [ 25.381370] CPU2 is up [ 25.382082] CPU3 is up [ 25.423168] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.435192] mmc1: Switching to 3.3V signalling voltage failed [ 25.963971] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.964141] panel-simple panel: panel supply power not found, using dummy regulator [ 26.007553] OOM killer enabled. [ 26.010714] Restarting tasks ... done. [ 26.014945] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE