U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# 4.1 MiB/s done Bytes transferred = 6202872 (5ea5f8 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.3 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5ea5f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180105-23173-g990b6a0 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Jan 4 21:49:10 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998492K/2096128K available (9216K kernel code, 781K rwdata, 2580K rodata, 1024K init, 298K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 782 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007455] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016983] Switching to timer-based delay loop, resolution 1000ns [ 0.024203] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029208] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039954] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047923] Switching to timer-based delay loop, resolution 83ns [ 0.054378] Console: colour dummy device 80x30 [ 0.058338] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068648] pid_max: default: 32768 minimum: 301 [ 0.073719] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079834] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087672] CPU: Testing write buffer coherency: ok [ 0.092003] /cpus/cpu@0 missing clock-frequency property [ 0.097005] /cpus/cpu@1 missing clock-frequency property [ 0.102315] /cpus/cpu@2 missing clock-frequency property [ 0.107580] /cpus/cpu@3 missing clock-frequency property [ 0.112851] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152964] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157717] Hierarchical SRCU implementation. [ 0.173513] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.192985] smp: Bringing up secondary CPUs ... [ 0.243613] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323723] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403838] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413413] smp: Brought up 1 node, 4 CPUs [ 0.432500] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438669] CPU: All CPU(s) started in SVC mode. [ 0.445096] devtmpfs: initialized [ 0.466335] Built 1 zonelists, mobility grouping on. Total pages: 516007 [ 0.471609] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488659] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.495047] pinctrl core: initialized pinctrl subsystem [ 0.501204] NET: Registered protocol family 16 [ 0.505656] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512724] cpuidle: using governor menu [ 0.538154] No ATAGs? [ 0.538288] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.546650] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.554393] iommu: Adding device 50000000.host1x to group 0 [ 0.558159] iommu: Adding device 54200000.dc to group 1 [ 0.563305] iommu: Adding device 54240000.dc to group 1 [ 0.568543] iommu: Adding device 57000000.gpu to group 2 [ 0.590911] +5V_SYS: supplied by +VDD_MUX [ 0.593401] +3.3V_SYS: supplied by +VDD_MUX [ 0.597970] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.603278] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.611405] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.617136] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.625368] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.632159] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.640354] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.646168] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.654393] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.659942] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.668172] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.673808] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.683255] vgaarb: loaded [ 0.685411] SCSI subsystem initialized [ 0.688586] libata version 3.00 loaded. [ 0.692490] usbcore: registered new interface driver usbfs [ 0.697709] usbcore: registered new interface driver hub [ 0.703003] usbcore: registered new device driver usb [ 0.711176] Linux video capture interface: v2.00 [ 0.713956] pps_core: LinuxPPS API ver. 1 registered [ 0.718844] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.727960] PTP clock support registered [ 0.733289] Advanced Linux Sound Architecture Driver Initialized. [ 0.738543] Bluetooth: Core ver 2.22 [ 0.741493] NET: Registered protocol family 31 [ 0.745890] Bluetooth: HCI device and connection manager initialized [ 0.752194] Bluetooth: HCI socket layer initialized [ 0.757072] Bluetooth: L2CAP socket layer initialized [ 0.762103] Bluetooth: SCO socket layer initialized [ 0.767560] clocksource: Switched to clocksource arch_sys_counter [ 0.866828] NET: Registered protocol family 2 [ 0.870287] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.876965] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.884051] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.890535] TCP: Hash tables configured (established 8192 bind 8192) [ 0.897151] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.902617] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.909236] NET: Registered protocol family 1 [ 0.913911] RPC: Registered named UNIX socket transport module. [ 0.919138] RPC: Registered udp transport module. [ 0.923788] RPC: Registered tcp transport module. [ 0.928489] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.935502] PCI: CLS 0 bytes, default 64 [ 0.940637] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.948724] Initialise system trusted keyrings [ 0.951533] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.959149] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.964344] NFS: Registering the id_resolver key type [ 0.968664] Key type id_resolver registered [ 0.972755] Key type id_legacy registered [ 0.981539] Key type asymmetric registered [ 0.983727] Asymmetric key parser 'x509' registered [ 0.988739] bounce: pool size: 64 pages [ 0.992450] io scheduler noop registered (default) [ 0.997160] io scheduler mq-deadline registered [ 1.001690] io scheduler kyber registered [ 1.007488] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.012494] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.019440] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.035432] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.039168] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.049103] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.059746] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.066733] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.072309] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.079876] console [ttyS0] disabled [ 1.081586] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.090532] console [ttyS0] enabled [ 1.090532] console [ttyS0] enabled [ 1.096712] bootconsole [earlycon0] disabled [ 1.096712] bootconsole [earlycon0] disabled [ 1.106108] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.117523] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.146299] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.166306] loop: module loaded [ 1.170923] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.178374] as3722 4-0040: AS3722 with revision 0x1 found [ 1.190612] as3722-sd2: supplied by +5V_SYS [ 1.195278] as3722-sd3: supplied by +5V_SYS [ 1.199719] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.206096] as3722-sd4: supplied by +5V_SYS [ 1.210787] as3722-sd5: supplied by +5V_SYS [ 1.216872] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.223006] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.229326] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.235263] as3722-ldo3: supplied by +3.3V_SYS [ 1.239792] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.247621] as3722-ldo4: supplied by +3.3V_SYS [ 1.252297] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.258551] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.263401] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.270379] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.276032] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.282233] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.293550] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.311872] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.318758] libphy: Fixed MDIO Bus: probed [ 1.322851] CAN device driver interface [ 1.326732] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.333934] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.339675] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.347132] usbcore: registered new interface driver pegasus [ 1.352880] usbcore: registered new interface driver asix [ 1.358347] usbcore: registered new interface driver ax88179_178a [ 1.364485] usbcore: registered new interface driver cdc_ether [ 1.370400] usbcore: registered new interface driver smsc75xx [ 1.376210] usbcore: registered new interface driver smsc95xx [ 1.382021] usbcore: registered new interface driver net1080 [ 1.387747] usbcore: registered new interface driver cdc_subset [ 1.393709] usbcore: registered new interface driver zaurus [ 1.399361] usbcore: registered new interface driver cdc_ncm [ 1.405262] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.410907] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.416608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.423155] ehci-pci: EHCI PCI platform driver [ 1.427673] tegra-ehci: Tegra EHCI driver [ 1.434522] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.439964] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.447778] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.477591] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.484419] hub 1-0:1.0: USB hub found [ 1.488232] hub 1-0:1.0: 1 port detected [ 1.493403] usbcore: registered new interface driver cdc_acm [ 1.499077] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.507128] usbcore: registered new interface driver cdc_wdm [ 1.512889] usbcore: registered new interface driver usb-storage [ 1.527317] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.534212] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.542041] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.549243] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.555762] i2c /dev entries driver [ 1.560539] usbcore: registered new interface driver uvcvideo [ 1.566277] USB Video Class driver (1.1.1) [ 1.570390] gspca_main: v2.14.0 registered [ 1.575119] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.585433] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.594333] sdhci: Secure Digital Host Controller Interface driver [ 1.600655] sdhci: Copyright(c) Pierre Ossman [ 1.605008] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.611019] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.615909] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.637199] mmc0: Unknown controller version (3). You may experience problems. [ 1.644477] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.681607] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.690001] usbcore: registered new interface driver usbhid [ 1.695608] usbhid: USB HID core driver [ 1.739592] mmc0: new high speed MMC card at address 0001 [ 1.750283] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.759968] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.770977] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.777120] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.786273] mmcblk0: p1 [ 2.138985] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.159308] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.170186] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.181425] NET: Registered protocol family 10 [ 2.187268] Segment Routing with IPv6 [ 2.191202] mip6: Mobile IPv6 [ 2.194169] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.201616] NET: Registered protocol family 17 [ 2.206071] NET: Registered protocol family 15 [ 2.210572] can: controller area network core (rev 20170425 abi 9) [ 2.216973] NET: Registered protocol family 29 [ 2.221433] can: raw protocol (rev 20170425) [ 2.225699] can: broadcast manager protocol (rev 20170425 t) [ 2.231376] can: netlink gateway (rev 20170425) max_hops=1 [ 2.237033] Bluetooth: RFCOMM socket layer initialized [ 2.242239] Bluetooth: RFCOMM ver 1.11 [ 2.246007] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.251336] Bluetooth: BNEP socket layer initialized [ 2.256294] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.262228] Bluetooth: HIDP socket layer initialized [ 2.267399] Key type dns_resolver registered [ 2.272223] Registering SWP/SWPB emulation handler [ 2.277837] Loading compiled-in X.509 certificates [ 2.302942] +3.3V_RUN: supplied by +3.3V_SYS [ 2.308094] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.312842] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.318736] +5V_USB_HS: supplied by +5V_SYS [ 2.323758] +3.3V_LP0: supplied by +3.3V_SYS [ 2.329332] +5V_HDMI_CON: supplied by +5V_SYS [ 2.334124] +5V_SATA: supplied by +5V_SYS [ 2.338593] +12V_SATA: supplied by +VDD_MUX [ 2.344178] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.351104] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.358229] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.365721] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.371360] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.380521] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.389868] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.398227] as3722-sd2: supplied by +5V_SYS [ 2.402724] as3722-sd3: supplied by +5V_SYS [ 2.407206] as3722-sd4: supplied by +5V_SYS [ 2.411898] as3722-sd5: supplied by +5V_SYS [ 2.417805] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.423249] as3722-ldo1: supplied by +3.3V_RUN [ 2.428474] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.434056] as3722-ldo3: supplied by +3.3V_SYS [ 2.439452] as3722-ldo4: supplied by +3.3V_SYS [ 2.444197] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.450083] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.458708] as3722-ldo6: supplied by +3.3V_RUN [ 2.463701] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.469119] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.476202] as3722-ldo9: supplied by +5V_SYS [ 2.481707] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.488472] as3722-ldo10: supplied by +5V_SYS [ 2.493580] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.500447] as3722-ldo11: supplied by +3.3V_RUN [ 2.505729] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.515016] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.524094] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.534637] scsi host0: tegra-ahci [ 2.539099] scsi host1: tegra-ahci [ 2.542807] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.550852] ata2: DUMMY [ 2.554582] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.560071] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.567926] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.597691] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.604808] hub 2-0:1.0: USB hub found [ 2.608680] hub 2-0:1.0: 1 port detected [ 2.625637] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 [ 2.635444] tegra-xusb 70090000.usb: failed to request firmware: -2 [ 2.641762] tegra-xusb 70090000.usb: failed to load firmware: -2 [ 2.648480] tegra-xusb: probe of 70090000.usb failed with error -2 [ 2.655512] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.660460] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.671893] mmc1: Unknown controller version (3). You may experience problems. [ 2.679232] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.717222] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.724974] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.732549] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.740542] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.765298] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.773653] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.787695] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.793977] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.800275] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.807256] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.814681] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.820273] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.826307] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.836078] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.845892] pci 0000:00:01.0: enabling Extended Tags [ 2.850981] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.860797] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.870700] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.877427] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.881111] ata1: SATA link down (SStatus 0 SControl 300) [ 2.893080] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.899149] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.908882] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.918698] pci 0000:00:02.0: enabling Extended Tags [ 2.923711] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.933490] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.943329] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.950087] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.960194] PCI: bus0: Fast back to back transfers disabled [ 2.965765] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.973830] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.982129] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.988281] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.995371] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.013573] mmc1: new high speed SDHC card at address aaaa [ 3.024368] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.028908] PCI: bus1: Fast back to back transfers disabled [ 3.028921] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.029153] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.029211] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.029255] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.029285] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.029463] pci 0000:02:00.0: supports D1 D2 [ 3.029469] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.060349] PCI: bus2: Fast back to back transfers disabled [ 3.060359] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.060406] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.060414] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.060424] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.060433] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.060447] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.060479] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.060492] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.060512] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.060539] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.060564] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.060578] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.060585] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.060597] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.060605] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.060642] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.060773] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.061079] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.061262] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.061368] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.061634] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.062018] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.062069] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.094311] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf64e0e0a, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.094319] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.098163] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.122143] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.122147] [drm] No driver support for vblank timestamp query. [ 3.122210] [drm] Cannot find any crtc or sizes [ 3.122408] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.123608] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.123641] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.124165] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.143206] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812) [ 3.143600] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.173566] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.173886] +USB0_VBUS_SW: disabling [ 3.173906] +1.8V_RUN_CAM: disabling [ 3.179016] +2.8V_RUN_CAM: disabling [ 3.185166] +1.2V_RUN_CAM_FRONT: disabling [ 3.192075] +1.05V_RUN_CAM_REAR: disabling [ 3.199943] +3.3V_RUN_TOUCH: disabling [ 3.206948] +2.8V_RUN_CAM_AF: disabling [ 3.213163] +1.8V_RUN_VPP_FUSE: disabling [ 3.219049] ALSA device list: [ 3.219056] #0: tegra-hda at 0x70038000 irq 346 [ 3.219059] #1: NVIDIA Tegra Jetson TK1 [ 3.384758] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.384762] cfg80211: failed to load regulatory.db [ 3.393031] mmcblk1: p1 p2 p3 [ 3.394036] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.433161] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.437949] EXT4-fs (mmcblk0p1): recovery complete [ 3.438730] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.438784] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.443197] devtmpfs: mounted [ 3.444036] Freeing unused kernel memory: 1024K [ 3.603480] Console: switching to colour frame buffer device 512x135 [ 3.963488] drm drm: fb0: frame buffer device bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#