U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3 MiB/s done Bytes transferred = 6366816 (612660 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.1 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x612660 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180104-224641-gf4286eee (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 3 21:34:23 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 781K rwdata, 2840K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 782 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017543] Switching to timer-based delay loop, resolution 1000ns [ 0.024081] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029764] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040510] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048481] Switching to timer-based delay loop, resolution 83ns [ 0.054657] Console: colour dummy device 80x30 [ 0.058890] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069200] pid_max: default: 32768 minimum: 301 [ 0.073965] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080382] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087730] CPU: Testing write buffer coherency: ok [ 0.092394] /cpus/cpu@0 missing clock-frequency property [ 0.097545] /cpus/cpu@1 missing clock-frequency property [ 0.102841] /cpus/cpu@2 missing clock-frequency property [ 0.108118] /cpus/cpu@3 missing clock-frequency property [ 0.113401] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153445] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158100] Hierarchical SRCU implementation. [ 0.173663] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193446] smp: Bringing up secondary CPUs ... [ 0.243749] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323775] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403814] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413592] smp: Brought up 1 node, 4 CPUs [ 0.432670] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438829] CPU: All CPU(s) started in SVC mode. [ 0.444122] devtmpfs: initialized [ 0.453660] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458709] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475951] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482239] pinctrl core: initialized pinctrl subsystem [ 0.487772] NET: Registered protocol family 16 [ 0.492172] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499089] cpuidle: using governor menu [ 0.510163] No ATAGs? [ 0.510224] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518564] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525249] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532930] iommu: Adding device 50000000.host1x to group 0 [ 0.538340] iommu: Adding device 54200000.dc to group 1 [ 0.543541] iommu: Adding device 54240000.dc to group 1 [ 0.548741] iommu: Adding device 57000000.gpu to group 2 [ 0.559881] +5V_SYS: supplied by +VDD_MUX [ 0.562109] +3.3V_SYS: supplied by +VDD_MUX [ 0.566431] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571767] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579870] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585806] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593920] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599673] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607803] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613540] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621713] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628533] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636722] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642573] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651176] vgaarb: loaded [ 0.653675] SCSI subsystem initialized [ 0.660778] libata version 3.00 loaded. [ 0.662815] usbcore: registered new interface driver usbfs [ 0.668179] usbcore: registered new interface driver hub [ 0.673500] usbcore: registered new device driver usb [ 0.679703] Linux video capture interface: v2.00 [ 0.683086] pps_core: LinuxPPS API ver. 1 registered [ 0.688013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.697114] PTP clock support registered [ 0.701161] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.708374] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714546] Advanced Linux Sound Architecture Driver Initialized. [ 0.720751] Bluetooth: Core ver 2.22 [ 0.724074] NET: Registered protocol family 31 [ 0.728491] Bluetooth: HCI device and connection manager initialized [ 0.734804] Bluetooth: HCI socket layer initialized [ 0.739662] Bluetooth: L2CAP socket layer initialized [ 0.744697] Bluetooth: SCO socket layer initialized [ 0.749779] clocksource: Switched to clocksource arch_sys_counter [ 0.787970] NET: Registered protocol family 2 [ 0.790794] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.798058] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.805112] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.811536] TCP: Hash tables configured (established 8192 bind 8192) [ 0.817973] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.823725] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.830149] NET: Registered protocol family 1 [ 0.834635] RPC: Registered named UNIX socket transport module. [ 0.840263] RPC: Registered udp transport module. [ 0.844922] RPC: Registered tcp transport module. [ 0.849602] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.856260] PCI: CLS 0 bytes, default 64 [ 0.860625] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.868714] Initialise system trusted keyrings [ 0.872577] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.879379] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.895000] NFS: Registering the id_resolver key type [ 0.898138] Key type id_resolver registered [ 0.902304] Key type id_legacy registered [ 0.908006] Key type asymmetric registered [ 0.910366] Asymmetric key parser 'x509' registered [ 0.915254] bounce: pool size: 64 pages [ 0.919039] io scheduler noop registered (default) [ 0.923791] io scheduler mq-deadline registered [ 0.928291] io scheduler kyber registered [ 0.932926] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.945429] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.951512] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.960322] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.967091] console [ttyS0] disabled [ 0.970081] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.978911] console [ttyS0] enabled [ 0.978911] console [ttyS0] enabled [ 0.985157] bootconsole [earlycon0] disabled [ 0.985157] bootconsole [earlycon0] disabled [ 1.010025] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.016496] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.024013] panel-simple panel: panel supply power not found, using dummy regulator [ 1.035515] loop: module loaded [ 1.039219] as3722 4-0040: AS3722 with revision 0x1 found [ 1.049321] as3722-sd2: supplied by +5V_SYS [ 1.053757] as3722-sd3: supplied by +5V_SYS [ 1.058093] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.064282] as3722-sd4: supplied by +5V_SYS [ 1.068619] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074377] as3722-sd5: supplied by +5V_SYS [ 1.079981] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085728] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091754] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.097382] as3722-ldo3: supplied by +3.3V_SYS [ 1.101841] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109421] as3722-ldo4: supplied by +3.3V_SYS [ 1.114027] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.120055] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.124827] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131524] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137557] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.142341] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.148895] as3722-ldo9: supplied by +5V_SYS [ 1.153474] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159676] as3722-ldo10: supplied by +5V_SYS [ 1.164197] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170648] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.193064] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207897] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213413] libphy: Fixed MDIO Bus: probed [ 1.217499] CAN device driver interface [ 1.221352] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228294] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233908] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241340] usbcore: registered new interface driver pegasus [ 1.247006] usbcore: registered new interface driver asix [ 1.252417] usbcore: registered new interface driver ax88179_178a [ 1.258511] usbcore: registered new interface driver cdc_ether [ 1.264365] usbcore: registered new interface driver smsc75xx [ 1.270130] usbcore: registered new interface driver smsc95xx [ 1.275878] usbcore: registered new interface driver net1080 [ 1.281546] usbcore: registered new interface driver cdc_subset [ 1.287466] usbcore: registered new interface driver zaurus [ 1.293058] usbcore: registered new interface driver cdc_ncm [ 1.298792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305310] ehci-pci: EHCI PCI platform driver [ 1.309760] tegra-ehci: Tegra EHCI driver [ 1.314030] usbcore: registered new interface driver cdc_acm [ 1.319674] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327686] usbcore: registered new interface driver cdc_wdm [ 1.333361] usbcore: registered new interface driver usb-storage [ 1.340025] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359640] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366506] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373270] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380413] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386692] i2c /dev entries driver [ 1.390610] usbcore: registered new interface driver uvcvideo [ 1.396340] USB Video Class driver (1.1.1) [ 1.400430] gspca_main: v2.14.0 registered [ 1.404752] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413414] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421763] sdhci: Secure Digital Host Controller Interface driver [ 1.427926] sdhci: Copyright(c) Pierre Ossman [ 1.432281] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438050] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.449902] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.454773] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.473810] mmc0: Unknown controller version (3). You may experience problems. [ 1.481050] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.517819] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.525540] usbcore: registered new interface driver usbhid [ 1.531219] usbhid: USB HID core driver [ 1.537326] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.580275] max98090 0-0010: MAX98090 REVID=0x43 [ 1.586816] max98090 0-0010: use default 2.8v micbias [ 1.594379] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.600951] mmc0: new high speed MMC card at address 0001 [ 1.608179] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.615375] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.621540] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.629888] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.638194] NET: Registered protocol family 10 [ 1.639029] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.642717] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.651695] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.662322] Segment Routing with IPv6 [ 1.666072] mip6: Mobile IPv6 [ 1.669053] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.675516] NET: Registered protocol family 17 [ 1.679965] NET: Registered protocol family 15 [ 1.684396] can: controller area network core (rev 20170425 abi 9) [ 1.690642] NET: Registered protocol family 29 [ 1.695074] can: raw protocol (rev 20170425) [ 1.699331] can: broadcast manager protocol (rev 20170425 t) [ 1.704986] can: netlink gateway (rev 20170425) max_hops=1 [ 1.710540] Bluetooth: RFCOMM socket layer initialized [ 1.715674] Bluetooth: RFCOMM ver 1.11 [ 1.719415] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.724723] Bluetooth: BNEP socket layer initialized [ 1.729673] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.735585] Bluetooth: HIDP socket layer initialized [ 1.740646] Key type dns_resolver registered [ 1.745103] Registering SWP/SWPB emulation handler [ 1.750150] Loading compiled-in X.509 certificates [ 1.762530] +3.3V_RUN: supplied by +3.3V_SYS [ 1.767467] +VDD_LED: supplied by +VDD_MUX [ 1.771694] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.777317] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.782076] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.786776] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.791989] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.796587] +5V_USB_HS: supplied by +5V_SYS [ 1.801106] +5V_USB_SS: supplied by +5V_SYS [ 1.806259] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.811571] +3.3V_LP0: supplied by +3.3V_SYS [ 1.816522] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.822357] +5V_HDMI_CON: supplied by +5V_SYS [ 1.827313] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.834057] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.847222] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.853466] panel-simple panel: panel supply power not found, using dummy regulator [ 1.930513] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.937911] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.943349] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.952880] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.961509] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.967899] hub 1-0:1.0: USB hub found [ 1.971723] hub 1-0:1.0: 6 ports detected [ 1.976094] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.981497] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.989164] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.997655] hub 2-0:1.0: USB hub found [ 2.001465] hub 2-0:1.0: 2 ports detected [ 2.006494] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.020007] mmc1: Unknown controller version (3). You may experience problems. [ 2.027250] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.033739] mmc1: Switching to 3.3V signalling voltage failed [ 2.062524] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.070167] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.075038] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.085352] mmc2: Unknown controller version (3). You may experience problems. [ 2.092688] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.128184] mmc1: new high speed SDIO card at address 0001 [ 2.133989] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.141545] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.147702] panel-simple panel: panel supply power not found, using dummy regulator [ 2.155789] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.162410] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.168625] panel-simple panel: panel supply power not found, using dummy regulator [ 2.176555] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.185317] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.197056] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.203794] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.210097] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.210110] +1.8V_RUN_CAM: disabling [ 2.212581] +1.2V_RUN_CAM_FRONT: disabling [ 2.217213] +1.05V_RUN_CAM_REAR: disabling [ 2.220886] +2.8V_RUN_TOUCH: disabling [ 2.225066] +2.8V_RUN_CAM_AF: disabling [ 2.229244] +1.8V_RUN_VPP_FUSE: disabling [ 2.233116] +VDD_LED: disabling [ 2.233120] +5V_VDD_TS_SW: disabling [ 2.233126] +3.3V_PANEL: disabling [ 2.233129] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.233132] +5V_HDMI_CON: disabling [ 2.233136] ALSA device list: [ 2.233138] #1: GoogleNyanBig [ 2.265497] cfg80211: failed to load regulatory.db [ 2.300277] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.308727] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.308902] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.309150] panel-simple panel: panel supply power not found, using dummy regulator [ 2.349832] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.381180] mmc2: new high speed SDHC card at address 0007 [ 2.388596] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.401594] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.407764] GPT:3014591 != 15564799 [ 2.411272] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.418651] GPT:3014591 != 15564799 [ 2.422155] GPT: Use GNU Parted to correct GPT errors. [ 2.427307] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.434357] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.440607] panel-simple panel: panel supply power not found, using dummy regulator [ 2.672308] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.687018] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.696510] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.702676] panel-simple panel: panel supply power not found, using dummy regulator [ 2.729449] EXT4-fs (mmcblk0p3): recovery complete [ 2.734836] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.742986] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.749531] devtmpfs: mounted [ 2.752969] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.890495] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.896205] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.901549] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.906876] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.912224] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.917529] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.922874] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.928177] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.933493] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.938795] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.089871] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.758834] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.769878] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.776036] panel-simple panel: panel supply power not found, using dummy regulator [ 4.109870] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.298105] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.304816] scsi host0: usb-storage 1-1:1.0 [ 4.309418] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.315683] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.321416] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.330086] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.336307] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 [ 5.527452] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.536159] sd 0:0:0:0: [sda] Write Protect is off [ 5.540985] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 rtcwake: assuming RTC uses UTC ... [ 5.547308] sd 0:0:0:0: [sda] No Caching mode page found rtcwake: wakeup from "mem" using[ 5.554487] sd 0:0:0:0: [sda] Assuming drive cache: write through /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.583360] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.596568] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.601448] PM: suspend entry (deep) [ 5.601451] PM: Syncing filesystems ... done. [ 5.610771] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.618814] OOM killer disabled. [ 5.622055] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.630672] Suspending console(s) (use no_console_suspend to debug) [ 5.823089] Disabling non-boot CPUs ... [ 5.879980] IRQ17 no longer affine to CPU1 [ 6.000515] Entering suspend state LP1 [ 6.000541] Enabling non-boot CPUs ... [ 6.001305] CPU1 is up [ 6.001945] CPU2 is up [ 6.002635] CPU3 is up [ 6.043615] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.055689] mmc1: Switching to 3.3V signalling voltage failed [ 6.600091] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.600312] panel-simple panel: panel supply power not found, using dummy regulator [ 6.632421] OOM killer enabled. [ 6.635550] Restarting tasks ... done. [ 6.640074] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.719606] PM: suspend entry (deep) [ 7.723205] PM: Syncing filesystems ... done. [ 7.728734] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.736901] OOM killer disabled. [ 7.740136] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.748730] Suspending console(s) (use no_console_suspend to debug) [ 7.933469] Disabling non-boot CPUs ... [ 8.120500] Entering suspend state LP1 [ 8.120526] Enabling non-boot CPUs ... [ 8.121329] CPU1 is up [ 8.121984] CPU2 is up [ 8.122690] CPU3 is up [ 8.163760] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.175882] mmc1: Switching to 3.3V signalling voltage failed [ 8.390250] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.703327] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.703495] panel-simple panel: panel supply power not found, using dummy regulator [ 8.753817] OOM killer enabled. [ 8.756947] Restarting tasks ... done. [ 8.771596] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.839599] PM: suspend entry (deep) [ 9.843186] PM: Syncing filesystems ... done. [ 9.848896] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.857063] OOM killer disabled. [ 9.860299] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.868889] Suspending console(s) (use no_console_suspend to debug) [ 10.052991] Disabling non-boot CPUs ... [ 10.210491] Entering suspend state LP1 [ 10.210516] Enabling non-boot CPUs ... [ 10.211323] CPU1 is up [ 10.211969] CPU2 is up [ 10.212679] CPU3 is up [ 10.253829] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.265995] mmc1: Switching to 3.3V signalling voltage failed [ 10.795358] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.795526] panel-simple panel: panel supply power not found, using dummy regulator [ 10.838971] OOM killer enabled. [ 10.842132] Restarting tasks ... done. [ 10.846569] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.928688] PM: suspend entry (deep) [ 11.932289] PM: Syncing filesystems ... done. [ 11.937977] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.946171] OOM killer disabled. [ 11.949393] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.958050] Suspending console(s) (use no_console_suspend to debug) [ 12.142953] Disabling non-boot CPUs ... [ 12.340429] Entering suspend state LP1 [ 12.340454] Enabling non-boot CPUs ... [ 12.341261] CPU1 is up [ 12.341921] CPU2 is up [ 12.342632] CPU3 is up [ 12.384069] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.396185] mmc1: Switching to 3.3V signalling voltage failed [ 12.610174] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.923805] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.923972] panel-simple panel: panel supply power not found, using dummy regulator [ 12.974212] OOM killer enabled. [ 12.977342] Restarting tasks ... done. [ 12.981771] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.059354] PM: suspend entry (deep) [ 14.062940] PM: Syncing filesystems ... done. [ 14.068577] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.076724] OOM killer disabled. [ 14.079960] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.088545] Suspending console(s) (use no_console_suspend to debug) [ 14.283412] Disabling non-boot CPUs ... [ 14.440426] Entering suspend state LP1 [ 14.440450] Enabling non-boot CPUs ... [ 14.441259] CPU1 is up [ 14.441927] CPU2 is up [ 14.442637] CPU3 is up [ 14.483694] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.495822] mmc1: Switching to 3.3V signalling voltage failed [ 14.710143] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.024451] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.024618] panel-simple panel: panel supply power not found, using dummy regulator [ 15.074918] OOM killer enabled. [ 15.078058] Restarting tasks ... done. [ 15.082637] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.159063] PM: suspend entry (deep) [ 16.162661] PM: Syncing filesystems ... done. [ 16.168183] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.176370] OOM killer disabled. [ 16.179586] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.188181] Suspending console(s) (use no_console_suspend to debug) [ 16.372911] Disabling non-boot CPUs ... [ 16.489839] IRQ17 no longer affine to CPU2 [ 16.550406] Entering suspend state LP1 [ 16.550432] Enabling non-boot CPUs ... [ 16.551225] CPU1 is up [ 16.551897] CPU2 is up [ 16.552612] CPU3 is up [ 16.593592] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.605804] mmc1: Switching to 3.3V signalling voltage failed [ 16.820151] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.133994] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.134161] panel-simple panel: panel supply power not found, using dummy regulator [ 17.188605] OOM killer enabled. [ 17.191768] Restarting tasks ... done. [ 17.196035] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.269113] PM: suspend entry (deep) [ 18.272703] PM: Syncing filesystems ... done. [ 18.278341] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.286467] OOM killer disabled. [ 18.289694] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.298317] Suspending console(s) (use no_console_suspend to debug) [ 18.483343] Disabling non-boot CPUs ... [ 18.640386] Entering suspend state LP1 [ 18.640411] Enabling non-boot CPUs ... [ 18.641209] CPU1 is up [ 18.641883] CPU2 is up [ 18.642596] CPU3 is up [ 18.683571] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.695793] mmc1: Switching to 3.3V signalling voltage failed [ 19.223866] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.224033] panel-simple panel: panel supply power not found, using dummy regulator [ 19.267570] OOM killer enabled. [ 19.270737] Restarting tasks ... done. [ 19.275025] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.359389] PM: suspend entry (deep) [ 20.362989] PM: Syncing filesystems ... done. [ 20.368676] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.376849] OOM killer disabled. [ 20.380086] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.388674] Suspending console(s) (use no_console_suspend to debug) [ 20.573355] Disabling non-boot CPUs ... [ 20.750288] Entering suspend state LP1 [ 20.750313] Enabling non-boot CPUs ... [ 20.751113] CPU1 is up [ 20.751771] CPU2 is up [ 20.752491] CPU3 is up [ 20.793775] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.806020] mmc1: Switching to 3.3V signalling voltage failed [ 21.020110] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.334027] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.334194] panel-simple panel: panel supply power not found, using dummy regulator [ 21.384490] OOM killer enabled. [ 21.387630] Restarting tasks ... done. [ 21.391929] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.479444] PM: suspend entry (deep) [ 22.483044] PM: Syncing filesystems ... done. [ 22.488733] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.496903] OOM killer disabled. [ 22.500140] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.508728] Suspending console(s) (use no_console_suspend to debug) [ 22.693030] Disabling non-boot CPUs ... [ 22.870352] Entering suspend state LP1 [ 22.870377] Enabling non-boot CPUs ... [ 22.871173] CPU1 is up [ 22.871837] CPU2 is up [ 22.872551] CPU3 is up [ 22.913689] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.925924] mmc1: Switching to 3.3V signalling voltage failed [ 23.140053] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.453848] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.454014] panel-simple panel: panel supply power not found, using dummy regulator [ 23.504320] OOM killer enabled. [ 23.507460] Restarting tasks ... done. [ 23.511965] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 24.599031] PM: suspend entry (deep) [ 24.602632] PM: Syncing filesystems ... done. [ 24.608320] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.616511] OOM killer disabled. [ 24.619733] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.628321] Suspending console(s) (use no_console_suspend to debug) [ 24.813277] Disabling non-boot CPUs ... [ 24.990231] Entering suspend state LP1 [ 24.990256] Enabling non-boot CPUs ... [ 24.991053] CPU1 is up [ 24.991716] CPU2 is up [ 24.992436] CPU3 is up [ 25.033582] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.045586] mmc1: Switching to 3.3V signalling voltage failed [ 25.573890] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.574059] panel-simple panel: panel supply power not found, using dummy regulator [ 25.617495] OOM killer enabled. [ 25.620661] Restarting tasks ... done. [ 25.625041] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE