U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.4 MiB/s done Bytes transferred = 6367400 (6128a8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6128a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180103-224395-g73005e1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Jan 3 01:46:04 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017543] Switching to timer-based delay loop, resolution 1000ns [ 0.024076] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029764] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040511] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048482] Switching to timer-based delay loop, resolution 83ns [ 0.054657] Console: colour dummy device 80x30 [ 0.058891] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069200] pid_max: default: 32768 minimum: 301 [ 0.073967] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080382] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087727] CPU: Testing write buffer coherency: ok [ 0.092393] /cpus/cpu@0 missing clock-frequency property [ 0.097545] /cpus/cpu@1 missing clock-frequency property [ 0.102842] /cpus/cpu@2 missing clock-frequency property [ 0.108120] /cpus/cpu@3 missing clock-frequency property [ 0.113401] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153445] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158100] Hierarchical SRCU implementation. [ 0.173660] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193446] smp: Bringing up secondary CPUs ... [ 0.243742] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323771] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403812] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413589] smp: Brought up 1 node, 4 CPUs [ 0.432667] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438825] CPU: All CPU(s) started in SVC mode. [ 0.444115] devtmpfs: initialized [ 0.453649] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458696] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475938] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482215] pinctrl core: initialized pinctrl subsystem [ 0.487757] NET: Registered protocol family 16 [ 0.492158] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499070] cpuidle: using governor menu [ 0.509954] No ATAGs? [ 0.510014] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518356] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525025] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532719] iommu: Adding device 50000000.host1x to group 0 [ 0.538132] iommu: Adding device 54200000.dc to group 1 [ 0.543331] iommu: Adding device 54240000.dc to group 1 [ 0.548532] iommu: Adding device 57000000.gpu to group 2 [ 0.559566] +5V_SYS: supplied by +VDD_MUX [ 0.561793] +3.3V_SYS: supplied by +VDD_MUX [ 0.566114] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571453] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579556] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585492] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593605] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599359] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607488] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613225] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621398] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628219] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636415] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642259] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650849] vgaarb: loaded [ 0.653359] SCSI subsystem initialized [ 0.656915] libata version 3.00 loaded. [ 0.660768] usbcore: registered new interface driver usbfs [ 0.666114] usbcore: registered new interface driver hub [ 0.671423] usbcore: registered new device driver usb [ 0.677624] Linux video capture interface: v2.00 [ 0.681023] pps_core: LinuxPPS API ver. 1 registered [ 0.685948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695050] PTP clock support registered [ 0.699085] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706309] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712481] Advanced Linux Sound Architecture Driver Initialized. [ 0.718690] Bluetooth: Core ver 2.22 [ 0.722008] NET: Registered protocol family 31 [ 0.726418] Bluetooth: HCI device and connection manager initialized [ 0.732740] Bluetooth: HCI socket layer initialized [ 0.737598] Bluetooth: L2CAP socket layer initialized [ 0.742634] Bluetooth: SCO socket layer initialized [ 0.747714] clocksource: Switched to clocksource arch_sys_counter [ 0.785711] NET: Registered protocol family 2 [ 0.788533] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795798] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802844] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.809276] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815712] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821452] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827887] NET: Registered protocol family 1 [ 0.832386] RPC: Registered named UNIX socket transport module. [ 0.837994] RPC: Registered udp transport module. [ 0.842663] RPC: Registered tcp transport module. [ 0.847344] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853999] PCI: CLS 0 bytes, default 64 [ 0.858355] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.866442] Initialise system trusted keyrings [ 0.870319] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.877121] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.882729] NFS: Registering the id_resolver key type [ 0.887478] Key type id_resolver registered [ 0.891651] Key type id_legacy registered [ 0.897273] Key type asymmetric registered [ 0.899703] Asymmetric key parser 'x509' registered [ 0.904594] bounce: pool size: 64 pages [ 0.908388] io scheduler noop registered (default) [ 0.913124] io scheduler mq-deadline registered [ 0.917630] io scheduler kyber registered [ 0.922274] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.934662] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.940750] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.949548] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.956313] console [ttyS0] disabled [ 0.959228] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.968154] console [ttyS0] enabled [ 0.968154] console [ttyS0] enabled [ 0.974371] bootconsole [earlycon0] disabled [ 0.974371] bootconsole [earlycon0] disabled [ 1.000481] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.006955] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.014467] panel-simple panel: panel supply power not found, using dummy regulator [ 1.025916] loop: module loaded [ 1.029636] as3722 4-0040: AS3722 with revision 0x1 found [ 1.039705] as3722-sd2: supplied by +5V_SYS [ 1.044126] as3722-sd3: supplied by +5V_SYS [ 1.048473] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.054649] as3722-sd4: supplied by +5V_SYS [ 1.058999] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.064742] as3722-sd5: supplied by +5V_SYS [ 1.070348] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.076093] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.082118] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.087741] as3722-ldo3: supplied by +3.3V_SYS [ 1.092192] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.099780] as3722-ldo4: supplied by +3.3V_SYS [ 1.104376] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.110407] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.115181] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.121872] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.127907] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.132681] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.139241] as3722-ldo9: supplied by +5V_SYS [ 1.143810] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.150021] as3722-ldo10: supplied by +5V_SYS [ 1.154533] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.160983] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.183523] cros-ec-spi spi0.0: Chrome EC device registered [ 1.198299] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213806] libphy: Fixed MDIO Bus: probed [ 1.217900] CAN device driver interface [ 1.221743] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228693] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.234300] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241730] usbcore: registered new interface driver pegasus [ 1.247396] usbcore: registered new interface driver asix [ 1.252807] usbcore: registered new interface driver ax88179_178a [ 1.258913] usbcore: registered new interface driver cdc_ether [ 1.264754] usbcore: registered new interface driver smsc75xx [ 1.270516] usbcore: registered new interface driver smsc95xx [ 1.276263] usbcore: registered new interface driver net1080 [ 1.281930] usbcore: registered new interface driver cdc_subset [ 1.287858] usbcore: registered new interface driver zaurus [ 1.293443] usbcore: registered new interface driver cdc_ncm [ 1.299186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305697] ehci-pci: EHCI PCI platform driver [ 1.310156] tegra-ehci: Tegra EHCI driver [ 1.314420] usbcore: registered new interface driver cdc_acm [ 1.320069] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.328079] usbcore: registered new interface driver cdc_wdm [ 1.333746] usbcore: registered new interface driver usb-storage [ 1.340411] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359914] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366772] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373527] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380676] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386954] i2c /dev entries driver [ 1.390863] usbcore: registered new interface driver uvcvideo [ 1.396593] USB Video Class driver (1.1.1) [ 1.400685] gspca_main: v2.14.0 registered [ 1.405001] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413665] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.422012] sdhci: Secure Digital Host Controller Interface driver [ 1.428190] sdhci: Copyright(c) Pierre Ossman [ 1.432533] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438311] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.451845] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.456715] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475846] mmc0: Unknown controller version (3). You may experience problems. [ 1.483089] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519862] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527572] usbcore: registered new interface driver usbhid [ 1.533252] usbhid: USB HID core driver [ 1.539370] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587639] mmc0: new high speed MMC card at address 0001 [ 1.593562] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594994] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.596857] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.598766] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.602814] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.611816] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.629481] max98090 0-0010: use default 2.8v micbias [ 1.636931] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.644450] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.652387] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.660597] NET: Registered protocol family 10 [ 1.665545] Segment Routing with IPv6 [ 1.669273] mip6: Mobile IPv6 [ 1.672232] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678683] NET: Registered protocol family 17 [ 1.683119] NET: Registered protocol family 15 [ 1.687549] can: controller area network core (rev 20170425 abi 9) [ 1.693801] NET: Registered protocol family 29 [ 1.698239] can: raw protocol (rev 20170425) [ 1.702496] can: broadcast manager protocol (rev 20170425 t) [ 1.708152] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713691] Bluetooth: RFCOMM socket layer initialized [ 1.718834] Bluetooth: RFCOMM ver 1.11 [ 1.722575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727881] Bluetooth: BNEP socket layer initialized [ 1.732831] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738742] Bluetooth: HIDP socket layer initialized [ 1.743786] Key type dns_resolver registered [ 1.748245] Registering SWP/SWPB emulation handler [ 1.753282] Loading compiled-in X.509 certificates [ 1.765299] +3.3V_RUN: supplied by +3.3V_SYS [ 1.770297] +VDD_LED: supplied by +VDD_MUX [ 1.774494] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.780165] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.784870] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.789629] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.794866] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.799497] +5V_USB_HS: supplied by +5V_SYS [ 1.803815] +5V_USB_SS: supplied by +5V_SYS [ 1.809170] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.814596] +3.3V_LP0: supplied by +3.3V_SYS [ 1.819626] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.825455] +5V_HDMI_CON: supplied by +5V_SYS [ 1.830549] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.837285] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.850600] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.856813] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928447] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935845] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941279] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950804] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959429] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965804] hub 1-0:1.0: USB hub found [ 1.969632] hub 1-0:1.0: 6 ports detected [ 1.974000] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979402] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.987067] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995557] hub 2-0:1.0: USB hub found [ 1.999367] hub 2-0:1.0: 2 ports detected [ 2.004412] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017943] mmc1: Unknown controller version (3). You may experience problems. [ 2.025188] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031674] mmc1: Switching to 3.3V signalling voltage failed [ 2.060461] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.068102] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.072973] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083216] mmc2: Unknown controller version (3). You may experience problems. [ 2.090552] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126172] mmc1: new high speed SDIO card at address 0001 [ 2.132006] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139611] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145775] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153906] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160683] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166908] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174864] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 18:30:11 UTC (946751411) [ 2.183626] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.195154] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.201909] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208229] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.208241] +1.8V_RUN_CAM: disabling [ 2.208437] +1.2V_RUN_CAM_FRONT: disabling [ 2.208659] +1.05V_RUN_CAM_REAR: disabling [ 2.208887] +2.8V_RUN_TOUCH: disabling [ 2.209111] +2.8V_RUN_CAM_AF: disabling [ 2.209337] +1.8V_RUN_VPP_FUSE: disabling [ 2.209564] +VDD_LED: disabling [ 2.209568] +5V_VDD_TS_SW: disabling [ 2.209574] +3.3V_PANEL: disabling [ 2.209578] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.209580] +5V_HDMI_CON: disabling [ 2.209584] ALSA device list: [ 2.209586] #1: GoogleNyanBig [ 2.262675] cfg80211: failed to load regulatory.db [ 2.318259] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.324390] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.332726] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.341599] panel-simple panel: panel supply power not found, using dummy regulator [ 2.357748] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.364621] mmc2: new high speed SDHC card at address 0007 [ 2.372034] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.385465] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.391675] GPT:3014591 != 15564799 [ 2.395162] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.402571] GPT:3014591 != 15564799 [ 2.406048] GPT: Use GNU Parted to correct GPT errors. [ 2.411232] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.418383] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.424551] panel-simple panel: panel supply power not found, using dummy regulator [ 2.678891] EXT4-fs (mmcblk0p3): recovery complete [ 2.684397] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.692539] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.699196] devtmpfs: mounted [ 2.700373] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.708710] Freeing unused kernel memory: 1024K [ 2.709142] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.709692] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.709926] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.908426] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.914117] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.919473] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.924778] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.930092] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.935394] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.940704] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.946006] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.951316] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.956618] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.107806] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.776966] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.787959] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.794123] panel-simple panel: panel supply power not found, using dummy regulator [ 4.137805] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.326089] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.332877] scsi host0: usb-storage 1-1:1.0 [ 4.337487] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.343679] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399398] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408079] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414301] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.568063] PM: suspend entry (deep) [ 5.571630] PM: Syncing filesystems ... done. [ 5.577489] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.585541] OOM killer disabled. [ 5.588812] Freezing remaining freezable tasks ... [ 5.605680] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.612508] (elapsed 0.023 seconds) done. [ 5.612516] Suspending console(s) (use no_console_suspend to debug) [ 5.629635] sd 0:0:0:0: [sda] Write Protect is off [ 5.629640] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.630629] sd 0:0:0:0: [sda] No Caching mode page found [ 5.630634] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.649835] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.654779] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.840957] Disabling non-boot CPUs ... [ 5.897920] IRQ17 no longer affine to CPU1 [ 6.018419] Entering suspend state LP1 [ 6.018444] Enabling non-boot CPUs ... [ 6.019210] CPU1 is up [ 6.019845] CPU2 is up [ 6.020549] CPU3 is up [ 6.061453] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.073610] mmc1: Switching to 3.3V signalling voltage failed [ 6.288332] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.601318] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.601491] panel-simple panel: panel supply power not found, using dummy regulator [ 6.690544] OOM killer enabled. [ 6.693673] Restarting tasks ... done. [ 6.698177] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.757667] PM: suspend entry (deep) [ 7.761258] PM: Syncing filesystems ... done. [ 7.766983] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.775143] OOM killer disabled. [ 7.778381] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.786983] Suspending console(s) (use no_console_suspend to debug) [ 7.971392] Disabling non-boot CPUs ... [ 8.148451] Entering suspend state LP1 [ 8.148476] Enabling non-boot CPUs ... [ 8.149280] CPU1 is up [ 8.149944] CPU2 is up [ 8.150656] CPU3 is up [ 8.191866] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.203917] mmc1: Switching to 3.3V signalling voltage failed [ 8.731739] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.731909] panel-simple panel: panel supply power not found, using dummy regulator [ 8.775265] OOM killer enabled. [ 8.778406] Restarting tasks ... done. [ 8.782601] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.886382] PM: suspend entry (deep) [ 9.889968] PM: Syncing filesystems ... done. [ 9.895424] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.903508] OOM killer disabled. [ 9.906724] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.915313] Suspending console(s) (use no_console_suspend to debug) [ 10.101307] Disabling non-boot CPUs ... [ 10.248383] Entering suspend state LP1 [ 10.248408] Enabling non-boot CPUs ... [ 10.249215] CPU1 is up [ 10.249881] CPU2 is up [ 10.250593] CPU3 is up [ 10.291596] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.303451] mmc1: Switching to 3.3V signalling voltage failed [ 10.518167] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.831390] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.831564] panel-simple panel: panel supply power not found, using dummy regulator [ 10.881798] OOM killer enabled. [ 10.884927] Restarting tasks ... done. [ 10.889406] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.987805] PM: suspend entry (deep) [ 11.991377] PM: Syncing filesystems ... done. [ 11.997126] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.005215] OOM killer disabled. [ 12.008446] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.017032] Suspending console(s) (use no_console_suspend to debug) [ 12.201398] Disabling non-boot CPUs ... [ 12.257826] IRQ17 no longer affine to CPU1 [ 12.368325] Entering suspend state LP1 [ 12.368350] Enabling non-boot CPUs ... [ 12.369159] CPU1 is up [ 12.369821] CPU2 is up [ 12.370535] CPU3 is up [ 12.412020] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.423963] mmc1: Switching to 3.3V signalling voltage failed [ 12.950737] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.950910] panel-simple panel: panel supply power not found, using dummy regulator [ 12.998453] OOM killer enabled. [ 13.001593] Restarting tasks ... done. [ 13.006239] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.106352] PM: suspend entry (deep) [ 14.109940] PM: Syncing filesystems ... done. [ 14.115490] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.123675] OOM killer disabled. [ 14.126891] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.135488] Suspending console(s) (use no_console_suspend to debug) [ 14.321648] Disabling non-boot CPUs ... [ 14.468322] Entering suspend state LP1 [ 14.468347] Enabling non-boot CPUs ... [ 14.469155] CPU1 is up [ 14.469831] CPU2 is up [ 14.470542] CPU3 is up [ 14.512080] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.523924] mmc1: Switching to 3.3V signalling voltage failed [ 15.051674] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.051847] panel-simple panel: panel supply power not found, using dummy regulator [ 15.095283] OOM killer enabled. [ 15.098471] Restarting tasks ... done. [ 15.102766] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.205873] PM: suspend entry (deep) [ 16.209461] PM: Syncing filesystems ... done. [ 16.214937] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.223119] OOM killer disabled. [ 16.226336] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.234953] Suspending console(s) (use no_console_suspend to debug) [ 16.421018] Disabling non-boot CPUs ... [ 16.588275] Entering suspend state LP1 [ 16.588301] Enabling non-boot CPUs ... [ 16.589109] CPU1 is up [ 16.589776] CPU2 is up [ 16.590490] CPU3 is up [ 16.631761] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.643897] mmc1: Switching to 3.3V signalling voltage failed [ 17.170643] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.170814] panel-simple panel: panel supply power not found, using dummy regulator [ 17.214184] OOM killer enabled. [ 17.217314] Restarting tasks ... done. [ 17.221647] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.325687] PM: suspend entry (deep) [ 18.329294] PM: Syncing filesystems ... done. [ 18.334773] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.342956] OOM killer disabled. [ 18.346172] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.354786] Suspending console(s) (use no_console_suspend to debug) [ 18.541304] Disabling non-boot CPUs ... [ 18.688265] Entering suspend state LP1 [ 18.688290] Enabling non-boot CPUs ... [ 18.689100] CPU1 is up [ 18.689774] CPU2 is up [ 18.690490] CPU3 is up [ 18.731421] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.743541] mmc1: Switching to 3.3V signalling voltage failed [ 18.958076] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 19.768278] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.768450] panel-simple panel: panel supply power not found, using dummy regulator [ 19.818825] OOM killer enabled. [ 19.821965] Restarting tasks ... done. [ 19.826382] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.425377] PM: suspend entry (deep) [ 20.428959] PM: Syncing filesystems ... done. [ 20.434432] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.442615] OOM killer disabled. [ 20.445831] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.454448] Suspending console(s) (use no_console_suspend to debug) [ 20.640780] Disabling non-boot CPUs ... [ 20.787704] IRQ17 no longer affine to CPU3 [ 20.788241] Entering suspend state LP1 [ 20.788266] Enabling non-boot CPUs ... [ 20.789075] CPU1 is up [ 20.789742] CPU2 is up [ 20.790456] CPU3 is up [ 20.831460] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.843435] mmc1: Switching to 3.3V signalling voltage failed [ 21.373717] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.373889] panel-simple panel: panel supply power not found, using dummy regulator [ 21.421359] OOM killer enabled. [ 21.424488] Restarting tasks ... done. [ 21.429020] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.525458] PM: suspend entry (deep) [ 22.529033] PM: Syncing filesystems ... done. [ 22.534486] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.542574] OOM killer disabled. [ 22.545790] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.554393] Suspending console(s) (use no_console_suspend to debug) [ 22.740758] Disabling non-boot CPUs ... [ 22.797724] IRQ17 no longer affine to CPU1 [ 22.908221] Entering suspend state LP1 [ 22.908246] Enabling non-boot CPUs ... [ 22.909056] CPU1 is up [ 22.909723] CPU2 is up [ 22.910426] CPU3 is up [ 22.951625] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.963643] mmc1: Switching to 3.3V signalling voltage failed [ 23.177989] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.492416] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.492587] panel-simple panel: panel supply power not found, using dummy regulator [ 23.546904] OOM killer enabled. [ 23.550039] Restarting tasks ... done. [ 23.554254] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 24.645457] PM: suspend entry (deep) [ 24.649033] PM: Syncing filesystems ... done. [ 24.654503] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.662688] OOM killer disabled. [ 24.665904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.674521] Suspending console(s) (use no_console_suspend to debug) [ 24.861249] Disabling non-boot CPUs ... [ 25.038176] Entering suspend state LP1 [ 25.038201] Enabling non-boot CPUs ... [ 25.039005] CPU1 is up [ 25.039678] CPU2 is up [ 25.040393] CPU3 is up [ 25.081840] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.093681] mmc1: Switching to 3.3V signalling voltage failed [ 25.308008] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 25.623047] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.623219] panel-simple panel: panel supply power not found, using dummy regulator [ 25.673525] OOM killer enabled. [ 25.676665] Restarting tasks ... done. [ 25.681049] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE