U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.6 MiB/s done Bytes transferred = 6365400 (6120d8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6120d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180102-224118-ge0e9981 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 2 07:17:16 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008009] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017542] Switching to timer-based delay loop, resolution 1000ns [ 0.024089] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029762] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040509] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048480] Switching to timer-based delay loop, resolution 83ns [ 0.054666] Console: colour dummy device 80x30 [ 0.058888] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069199] pid_max: default: 32768 minimum: 301 [ 0.073964] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080381] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087723] CPU: Testing write buffer coherency: ok [ 0.092395] /cpus/cpu@0 missing clock-frequency property [ 0.097543] /cpus/cpu@1 missing clock-frequency property [ 0.102840] /cpus/cpu@2 missing clock-frequency property [ 0.108117] /cpus/cpu@3 missing clock-frequency property [ 0.113399] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153443] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158097] Hierarchical SRCU implementation. [ 0.173666] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193445] smp: Bringing up secondary CPUs ... [ 0.243744] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323769] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403811] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413588] smp: Brought up 1 node, 4 CPUs [ 0.432666] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438824] CPU: All CPU(s) started in SVC mode. [ 0.444114] devtmpfs: initialized [ 0.453626] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458668] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466291] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475916] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482205] pinctrl core: initialized pinctrl subsystem [ 0.487730] NET: Registered protocol family 16 [ 0.492135] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.499061] cpuidle: using governor menu [ 0.510040] No ATAGs? [ 0.510100] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518442] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525122] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532807] iommu: Adding device 50000000.host1x to group 0 [ 0.538217] iommu: Adding device 54200000.dc to group 1 [ 0.543418] iommu: Adding device 54240000.dc to group 1 [ 0.548619] iommu: Adding device 57000000.gpu to group 2 [ 0.559757] +5V_SYS: supplied by +VDD_MUX [ 0.561982] +3.3V_SYS: supplied by +VDD_MUX [ 0.566304] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571642] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579745] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585682] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593796] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599549] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607662] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613416] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621590] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628409] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636598] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642449] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651071] vgaarb: loaded [ 0.653551] SCSI subsystem initialized [ 0.660655] libata version 3.00 loaded. [ 0.662689] usbcore: registered new interface driver usbfs [ 0.668055] usbcore: registered new interface driver hub [ 0.673376] usbcore: registered new device driver usb [ 0.679582] Linux video capture interface: v2.00 [ 0.682964] pps_core: LinuxPPS API ver. 1 registered [ 0.687889] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.696991] PTP clock support registered [ 0.701040] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.708251] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.714424] Advanced Linux Sound Architecture Driver Initialized. [ 0.720633] Bluetooth: Core ver 2.22 [ 0.723951] NET: Registered protocol family 31 [ 0.728370] Bluetooth: HCI device and connection manager initialized [ 0.734681] Bluetooth: HCI socket layer initialized [ 0.739539] Bluetooth: L2CAP socket layer initialized [ 0.744574] Bluetooth: SCO socket layer initialized [ 0.749662] clocksource: Switched to clocksource arch_sys_counter [ 0.787287] NET: Registered protocol family 2 [ 0.790114] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.797374] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.804431] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.810854] TCP: Hash tables configured (established 8192 bind 8192) [ 0.817284] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.823042] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.829455] NET: Registered protocol family 1 [ 0.833965] RPC: Registered named UNIX socket transport module. [ 0.839559] RPC: Registered udp transport module. [ 0.844258] RPC: Registered tcp transport module. [ 0.848919] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.855579] PCI: CLS 0 bytes, default 64 [ 0.859945] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.868039] Initialise system trusted keyrings [ 0.871885] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.878696] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.894330] NFS: Registering the id_resolver key type [ 0.897471] Key type id_resolver registered [ 0.901642] Key type id_legacy registered [ 0.907335] Key type asymmetric registered [ 0.909694] Asymmetric key parser 'x509' registered [ 0.914583] bounce: pool size: 64 pages [ 0.918369] io scheduler noop registered (default) [ 0.923132] io scheduler mq-deadline registered [ 0.927621] io scheduler kyber registered [ 0.932259] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.944792] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.950974] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.959696] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.966470] console [ttyS0] disabled [ 0.969349] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.978287] console [ttyS0] enabled [ 0.978287] console [ttyS0] enabled [ 0.984518] bootconsole [earlycon0] disabled [ 0.984518] bootconsole [earlycon0] disabled [ 1.009935] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.016411] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.024049] panel-simple panel: panel supply power not found, using dummy regulator [ 1.035507] loop: module loaded [ 1.039198] as3722 4-0040: AS3722 with revision 0x1 found [ 1.049282] as3722-sd2: supplied by +5V_SYS [ 1.053722] as3722-sd3: supplied by +5V_SYS [ 1.058056] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.064245] as3722-sd4: supplied by +5V_SYS [ 1.068578] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074334] as3722-sd5: supplied by +5V_SYS [ 1.079935] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085678] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091703] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.097328] as3722-ldo3: supplied by +3.3V_SYS [ 1.101789] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109364] as3722-ldo4: supplied by +3.3V_SYS [ 1.113967] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119999] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.124769] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131466] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137496] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.142277] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.148831] as3722-ldo9: supplied by +5V_SYS [ 1.153410] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159614] as3722-ldo10: supplied by +5V_SYS [ 1.164132] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170585] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.193008] cros-ec-spi spi0.0: Chrome EC device registered [ 1.207802] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.213323] libphy: Fixed MDIO Bus: probed [ 1.217407] CAN device driver interface [ 1.221260] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228202] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233816] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.241247] usbcore: registered new interface driver pegasus [ 1.246913] usbcore: registered new interface driver asix [ 1.252322] usbcore: registered new interface driver ax88179_178a [ 1.258417] usbcore: registered new interface driver cdc_ether [ 1.264270] usbcore: registered new interface driver smsc75xx [ 1.270036] usbcore: registered new interface driver smsc95xx [ 1.275784] usbcore: registered new interface driver net1080 [ 1.281453] usbcore: registered new interface driver cdc_subset [ 1.287373] usbcore: registered new interface driver zaurus [ 1.292965] usbcore: registered new interface driver cdc_ncm [ 1.298699] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305218] ehci-pci: EHCI PCI platform driver [ 1.309676] tegra-ehci: Tegra EHCI driver [ 1.313945] usbcore: registered new interface driver cdc_acm [ 1.319589] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327601] usbcore: registered new interface driver cdc_wdm [ 1.333276] usbcore: registered new interface driver usb-storage [ 1.339988] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359678] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366536] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.373303] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380447] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386726] i2c /dev entries driver [ 1.390638] usbcore: registered new interface driver uvcvideo [ 1.396368] USB Video Class driver (1.1.1) [ 1.400460] gspca_main: v2.14.0 registered [ 1.404788] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413451] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421807] sdhci: Secure Digital Host Controller Interface driver [ 1.427971] sdhci: Copyright(c) Pierre Ossman [ 1.432325] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.438094] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.451894] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.456765] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.477795] mmc0: Unknown controller version (3). You may experience problems. [ 1.485035] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.521813] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.529533] usbcore: registered new interface driver usbhid [ 1.535212] usbhid: USB HID core driver [ 1.541349] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.589601] mmc0: new high speed MMC card at address 0001 [ 1.595523] max98090 0-0010: MAX98090 REVID=0x43 [ 1.596949] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.598814] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.600711] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.604777] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.613750] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.631431] max98090 0-0010: use default 2.8v micbias [ 1.638874] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.646374] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.654317] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.662541] NET: Registered protocol family 10 [ 1.667485] Segment Routing with IPv6 [ 1.671213] mip6: Mobile IPv6 [ 1.674172] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680626] NET: Registered protocol family 17 [ 1.685062] NET: Registered protocol family 15 [ 1.689492] can: controller area network core (rev 20170425 abi 9) [ 1.695739] NET: Registered protocol family 29 [ 1.700177] can: raw protocol (rev 20170425) [ 1.704434] can: broadcast manager protocol (rev 20170425 t) [ 1.710091] can: netlink gateway (rev 20170425) max_hops=1 [ 1.715633] Bluetooth: RFCOMM socket layer initialized [ 1.720778] Bluetooth: RFCOMM ver 1.11 [ 1.724519] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.729824] Bluetooth: BNEP socket layer initialized [ 1.734774] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.740685] Bluetooth: HIDP socket layer initialized [ 1.745732] Key type dns_resolver registered [ 1.750189] Registering SWP/SWPB emulation handler [ 1.755227] Loading compiled-in X.509 certificates [ 1.767109] +3.3V_RUN: supplied by +3.3V_SYS [ 1.772106] +VDD_LED: supplied by +VDD_MUX [ 1.776303] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.781975] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.786678] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791439] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.796673] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.801308] +5V_USB_HS: supplied by +5V_SYS [ 1.805627] +5V_USB_SS: supplied by +5V_SYS [ 1.810974] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816285] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821316] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.827140] +5V_HDMI_CON: supplied by +5V_SYS [ 1.832133] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.838865] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.852022] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.858240] panel-simple panel: panel supply power not found, using dummy regulator [ 1.930395] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.937790] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.943227] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.952760] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.961387] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.967763] hub 1-0:1.0: USB hub found [ 1.971591] hub 1-0:1.0: 6 ports detected [ 1.975967] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.981370] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.989034] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.997531] hub 2-0:1.0: USB hub found [ 2.001343] hub 2-0:1.0: 2 ports detected [ 2.006380] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.019889] mmc1: Unknown controller version (3). You may experience problems. [ 2.027133] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.033627] mmc1: Switching to 3.3V signalling voltage failed [ 2.062409] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.070053] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.074922] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.085162] mmc2: Unknown controller version (3). You may experience problems. [ 2.092501] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.127258] mmc1: new high speed SDIO card at address 0001 [ 2.133069] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.140677] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.146844] panel-simple panel: panel supply power not found, using dummy regulator [ 2.154975] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.161595] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.167819] panel-simple panel: panel supply power not found, using dummy regulator [ 2.175780] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.184543] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.196229] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.202968] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.209985] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.209998] +1.8V_RUN_CAM: disabling [ 2.211754] +1.2V_RUN_CAM_FRONT: disabling [ 2.216395] +1.05V_RUN_CAM_REAR: disabling [ 2.220085] +2.8V_RUN_TOUCH: disabling [ 2.224239] +2.8V_RUN_CAM_AF: disabling [ 2.228416] +1.8V_RUN_VPP_FUSE: disabling [ 2.232285] +VDD_LED: disabling [ 2.232288] +5V_VDD_TS_SW: disabling [ 2.232294] +3.3V_PANEL: disabling [ 2.232298] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.232300] +5V_HDMI_CON: disabling [ 2.232304] ALSA device list: [ 2.232306] #1: GoogleNyanBig [ 2.264682] cfg80211: failed to load regulatory.db [ 2.300167] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.308618] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.308790] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.309052] panel-simple panel: panel supply power not found, using dummy regulator [ 2.349704] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.380851] mmc2: new high speed SDHC card at address 0007 [ 2.388190] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.401031] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.407201] GPT:3014591 != 15564799 [ 2.410696] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.418072] GPT:3014591 != 15564799 [ 2.421578] GPT: Use GNU Parted to correct GPT errors. [ 2.426729] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.433783] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.439972] panel-simple panel: panel supply power not found, using dummy regulator [ 2.672216] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.686940] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.696437] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.702615] panel-simple panel: panel supply power not found, using dummy regulator [ 2.838232] EXT4-fs (mmcblk0p3): recovery complete [ 2.843788] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.851933] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.858548] devtmpfs: mounted [ 2.861984] Freeing unused kernel memory: 1024K [ 2.889951] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.895624] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.900948] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.906271] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.911765] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.917343] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.922991] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.928620] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.934151] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.939762] alloc_contig_range: [fbca3, fbca4) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.089752] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.759718] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.770768] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.776937] panel-simple panel: panel supply power not found, using dummy regulator [ 4.119754] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.308064] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.315027] scsi host0: usb-storage 1-1:1.0 [ 4.319639] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.325839] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.321462] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.330139] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.336356] panel-simple panel: panel supply power not found, using dummy regulator [ 5.527404] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.536207] sd 0:0:0:0: [sda] Write Protect is off [ 5.541029] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.547053] sd 0:0:0:0: [sda] No Caching mode page found [ 5.552394] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.583527] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 rtcwake -d rtc1 -m mem -s 3 [ 5.598496] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.653437] PM: suspend entry (deep) [ 5.657006] PM: Syncing filesystems ... done. [ 5.663235] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.671396] OOM killer disabled. [ 5.674615] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.683236] Suspending console(s) (use no_console_suspend to debug) [ 5.873491] Disabling non-boot CPUs ... [ 5.929859] IRQ17 no longer affine to CPU1 [ 6.050378] Entering suspend state LP1 [ 6.050404] Enabling non-boot CPUs ... [ 6.051171] CPU1 is up [ 6.051807] CPU2 is up [ 6.052503] CPU3 is up [ 6.093490] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.105449] mmc1: Switching to 3.3V signalling voltage failed [ 6.633266] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.633441] panel-simple panel: panel supply power not found, using dummy regulator [ 6.680930] OOM killer enabled. [ 6.684059] Restarting tasks ... done. [ 6.688728] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.648550] PM: suspend entry (deep) [ 7.652137] PM: Syncing filesystems ... done. [ 7.657675] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.665851] OOM killer disabled. [ 7.669067] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.677665] Suspending console(s) (use no_console_suspend to debug) [ 7.863435] Disabling non-boot CPUs ... [ 8.030308] Entering suspend state LP1 [ 8.030334] Enabling non-boot CPUs ... [ 8.031141] CPU1 is up [ 8.031801] CPU2 is up [ 8.032510] CPU3 is up [ 8.074097] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.086140] mmc1: Switching to 3.3V signalling voltage failed [ 8.300099] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.613408] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.613583] panel-simple panel: panel supply power not found, using dummy regulator [ 8.663877] OOM killer enabled. [ 8.667017] Restarting tasks ... done. [ 8.671665] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.628479] PM: suspend entry (deep) [ 9.632066] PM: Syncing filesystems ... done. [ 9.637603] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.645689] OOM killer disabled. [ 9.648904] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.657496] Suspending console(s) (use no_console_suspend to debug) [ 9.842856] Disabling non-boot CPUs ... [ 9.949797] IRQ17 no longer affine to CPU2 [ 10.010262] Entering suspend state LP1 [ 10.010287] Enabling non-boot CPUs ... [ 10.011086] CPU1 is up [ 10.011758] CPU2 is up [ 10.012466] CPU3 is up [ 10.053633] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.065885] mmc1: Switching to 3.3V signalling voltage failed [ 10.280111] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.593932] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.594107] panel-simple panel: panel supply power not found, using dummy regulator [ 10.648536] OOM killer enabled. [ 10.651700] Restarting tasks ... done. [ 10.655990] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.609254] PM: suspend entry (deep) [ 11.612845] PM: Syncing filesystems ... done. [ 11.618556] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.626724] OOM killer disabled. [ 11.629961] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.638556] Suspending console(s) (use no_console_suspend to debug) [ 11.823222] Disabling non-boot CPUs ... [ 11.999747] IRQ17 no longer affine to CPU3 [ 12.000267] Entering suspend state LP1 [ 12.000293] Enabling non-boot CPUs ... [ 12.001097] CPU1 is up [ 12.001740] CPU2 is up [ 12.002456] CPU3 is up [ 12.043591] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.055893] mmc1: Switching to 3.3V signalling voltage failed [ 12.583766] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.583942] panel-simple panel: panel supply power not found, using dummy regulator [ 12.631498] OOM killer enabled. [ 12.634638] Restarting tasks ... done. [ 12.638926] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 13.597854] PM: suspend entry (deep) [ 13.601441] PM: Syncing filesystems ... done. [ 13.606910] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.615090] OOM killer disabled. [ 13.618306] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.626934] Suspending console(s) (use no_console_suspend to debug) [ 13.813294] Disabling non-boot CPUs ... [ 13.849767] IRQ17 no longer affine to CPU1 [ 13.960221] Entering suspend state LP1 [ 13.960247] Enabling non-boot CPUs ... [ 13.961044] CPU1 is up [ 13.961713] CPU2 is up [ 13.962424] CPU3 is up [ 14.003502] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.015706] mmc1: Switching to 3.3V signalling voltage failed [ 14.545038] tegra-sor 54540000.sor: failed to probe output: -517 [ 14.545215] panel-simple panel: panel supply power not found, using dummy regulator [ 14.592682] OOM killer enabled. [ 14.595811] Restarting tasks ... done. [ 14.600064] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 15.557493] PM: suspend entry (deep) [ 15.561070] PM: Syncing filesystems ... done. [ 15.566533] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.574616] OOM killer disabled. [ 15.577832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.586445] Suspending console(s) (use no_console_suspend to debug) [ 15.773270] Disabling non-boot CPUs ... [ 15.940205] Entering suspend state LP1 [ 15.940231] Enabling non-boot CPUs ... [ 15.941034] CPU1 is up [ 15.941698] CPU2 is up [ 15.942406] CPU3 is up [ 15.983544] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.995583] mmc1: Switching to 3.3V signalling voltage failed [ 16.210049] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 16.524439] tegra-sor 54540000.sor: failed to probe output: -517 [ 16.524614] panel-simple panel: panel supply power not found, using dummy regulator [ 16.574846] OOM killer enabled. [ 16.577975] Restarting tasks ... done. [ 16.582251] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 17.537454] PM: suspend entry (deep) [ 17.541030] PM: Syncing filesystems ... done. [ 17.546489] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.554573] OOM killer disabled. [ 17.557789] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.566404] Suspending console(s) (use no_console_suspend to debug) [ 17.753362] Disabling non-boot CPUs ... [ 17.920178] Entering suspend state LP1 [ 17.920203] Enabling non-boot CPUs ... [ 17.921006] CPU1 is up [ 17.921672] CPU2 is up [ 17.922381] CPU3 is up [ 17.963422] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.975523] mmc1: Switching to 3.3V signalling voltage failed [ 18.189987] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 18.505589] tegra-sor 54540000.sor: failed to probe output: -517 [ 18.505765] panel-simple panel: panel supply power not found, using dummy regulator [ 18.556001] OOM killer enabled. [ 18.559130] Restarting tasks ... done. [ 18.563372] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 19.517461] PM: suspend entry (deep) [ 19.521037] PM: Syncing filesystems ... done. [ 19.526509] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.534687] OOM killer disabled. [ 19.537903] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.546532] Suspending console(s) (use no_console_suspend to debug) [ 19.733095] Disabling non-boot CPUs ... [ 19.899644] IRQ17 no longer affine to CPU3 [ 19.900166] Entering suspend state LP1 [ 19.900191] Enabling non-boot CPUs ... [ 19.900992] CPU1 is up [ 19.901657] CPU2 is up [ 19.902368] CPU3 is up [ 19.943953] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.955844] mmc1: Switching to 3.3V signalling voltage failed [ 20.483286] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.483463] panel-simple panel: panel supply power not found, using dummy regulator [ 20.531022] OOM killer enabled. [ 20.534161] Restarting tasks ... done. [ 20.538886] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 21.498561] PM: suspend entry (deep) [ 21.502163] PM: Syncing filesystems ... done. [ 21.507841] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.516042] OOM killer disabled. [ 21.519267] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.527927] Suspending console(s) (use no_console_suspend to debug) [ 21.712717] Disabling non-boot CPUs ... [ 21.890127] Entering suspend state LP1 [ 21.890153] Enabling non-boot CPUs ... [ 21.890951] CPU1 is up [ 21.891607] CPU2 is up [ 21.892320] CPU3 is up [ 21.933646] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.945748] mmc1: Switching to 3.3V signalling voltage failed [ 22.475516] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.475689] panel-simple panel: panel supply power not found, using dummy regulator [ 22.519077] OOM killer enabled. [ 22.522218] Restarting tasks ... done. [ 22.526547] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 23.488824] PM: suspend entry (deep) [ 23.492413] PM: Syncing filesystems ... done. [ 23.498044] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.506145] OOM killer disabled. [ 23.509361] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.517954] Suspending console(s) (use no_console_suspend to debug) [ 23.702759] Disabling non-boot CPUs ... [ 23.869599] IRQ17 no longer affine to CPU3 [ 23.870121] Entering suspend state LP1 [ 23.870146] Enabling non-boot CPUs ... [ 23.870949] CPU1 is up [ 23.871605] CPU2 is up [ 23.872313] CPU3 is up [ 23.913357] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.925503] mmc1: Switching to 3.3V signalling voltage failed [ 24.455250] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.455427] panel-simple panel: panel supply power not found, using dummy regulator [ 24.502964] OOM killer enabled. [ 24.506101] Restarting tasks ... done. [ 24.510727] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE