U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.9 MiB/s done Bytes transferred = 6365400 (6120d8 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6120d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc6-next-20180102-224118-ge0e9981 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Jan 2 07:17:16 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007441] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016970] Switching to timer-based delay loop, resolution 1000ns [ 0.024254] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029194] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039940] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047908] Switching to timer-based delay loop, resolution 83ns [ 0.054390] Console: colour dummy device 80x30 [ 0.058324] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068633] pid_max: default: 32768 minimum: 301 [ 0.073716] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079819] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087662] CPU: Testing write buffer coherency: ok [ 0.091987] /cpus/cpu@0 missing clock-frequency property [ 0.096990] /cpus/cpu@1 missing clock-frequency property [ 0.102302] /cpus/cpu@2 missing clock-frequency property [ 0.107566] /cpus/cpu@3 missing clock-frequency property [ 0.112837] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152951] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157705] Hierarchical SRCU implementation. [ 0.173507] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.192968] smp: Bringing up secondary CPUs ... [ 0.243594] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323700] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403814] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413388] smp: Brought up 1 node, 4 CPUs [ 0.432476] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438645] CPU: All CPU(s) started in SVC mode. [ 0.445077] devtmpfs: initialized [ 0.466593] Built 1 zonelists, mobility grouping on. Total pages: 515751 [ 0.471861] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479449] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488917] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.495305] pinctrl core: initialized pinctrl subsystem [ 0.501475] NET: Registered protocol family 16 [ 0.505917] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.513016] cpuidle: using governor menu [ 0.538769] No ATAGs? [ 0.538905] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.547267] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.555015] iommu: Adding device 50000000.host1x to group 0 [ 0.558783] iommu: Adding device 54200000.dc to group 1 [ 0.563928] iommu: Adding device 54240000.dc to group 1 [ 0.569170] iommu: Adding device 57000000.gpu to group 2 [ 0.591842] +5V_SYS: supplied by +VDD_MUX [ 0.594335] +3.3V_SYS: supplied by +VDD_MUX [ 0.598903] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.604211] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.612335] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.618062] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.626296] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.633089] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.641283] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.647099] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.655323] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.660874] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.669102] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.674744] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.684253] vgaarb: loaded [ 0.686344] SCSI subsystem initialized [ 0.689518] libata version 3.00 loaded. [ 0.693421] usbcore: registered new interface driver usbfs [ 0.698640] usbcore: registered new interface driver hub [ 0.703936] usbcore: registered new device driver usb [ 0.712158] Linux video capture interface: v2.00 [ 0.714938] pps_core: LinuxPPS API ver. 1 registered [ 0.719827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.728942] PTP clock support registered [ 0.734271] Advanced Linux Sound Architecture Driver Initialized. [ 0.739528] Bluetooth: Core ver 2.22 [ 0.742475] NET: Registered protocol family 31 [ 0.746873] Bluetooth: HCI device and connection manager initialized [ 0.753177] Bluetooth: HCI socket layer initialized [ 0.758054] Bluetooth: L2CAP socket layer initialized [ 0.763086] Bluetooth: SCO socket layer initialized [ 0.768540] clocksource: Switched to clocksource arch_sys_counter [ 0.865579] NET: Registered protocol family 2 [ 0.869057] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.875716] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.882800] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.889286] TCP: Hash tables configured (established 8192 bind 8192) [ 0.895893] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.901369] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.907960] NET: Registered protocol family 1 [ 0.912693] RPC: Registered named UNIX socket transport module. [ 0.917859] RPC: Registered udp transport module. [ 0.922566] RPC: Registered tcp transport module. [ 0.927219] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.934271] PCI: CLS 0 bytes, default 64 [ 0.939390] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.947476] Initialise system trusted keyrings [ 0.950303] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.957883] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.963125] NFS: Registering the id_resolver key type [ 0.967359] Key type id_resolver registered [ 0.971564] Key type id_legacy registered [ 0.980692] Key type asymmetric registered [ 0.982880] Asymmetric key parser 'x509' registered [ 0.987864] bounce: pool size: 64 pages [ 0.991626] io scheduler noop registered (default) [ 0.996313] io scheduler mq-deadline registered [ 1.000837] io scheduler kyber registered [ 1.006658] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.011647] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.018588] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.034880] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.038616] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.048549] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.059302] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.066286] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.071861] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.079465] console [ttyS0] disabled [ 1.081176] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.090125] console [ttyS0] enabled [ 1.090125] console [ttyS0] enabled [ 1.096302] bootconsole [earlycon0] disabled [ 1.096302] bootconsole [earlycon0] disabled [ 1.106113] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.116743] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.145518] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.165959] loop: module loaded [ 1.170578] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.178011] as3722 4-0040: AS3722 with revision 0x1 found [ 1.190331] as3722-sd2: supplied by +5V_SYS [ 1.195003] as3722-sd3: supplied by +5V_SYS [ 1.199454] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.205824] as3722-sd4: supplied by +5V_SYS [ 1.210516] as3722-sd5: supplied by +5V_SYS [ 1.216618] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.222764] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.229083] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.235042] as3722-ldo3: supplied by +3.3V_SYS [ 1.239559] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.247368] as3722-ldo4: supplied by +3.3V_SYS [ 1.252072] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.258313] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.263187] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.270177] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.275830] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.282031] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.293368] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.311643] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.318563] libphy: Fixed MDIO Bus: probed [ 1.322656] CAN device driver interface [ 1.326540] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.333735] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.339475] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.346931] usbcore: registered new interface driver pegasus [ 1.352680] usbcore: registered new interface driver asix [ 1.358127] usbcore: registered new interface driver ax88179_178a [ 1.364287] usbcore: registered new interface driver cdc_ether [ 1.370202] usbcore: registered new interface driver smsc75xx [ 1.376013] usbcore: registered new interface driver smsc95xx [ 1.381826] usbcore: registered new interface driver net1080 [ 1.387530] usbcore: registered new interface driver cdc_subset [ 1.393517] usbcore: registered new interface driver zaurus [ 1.399170] usbcore: registered new interface driver cdc_ncm [ 1.405068] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.410718] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.416424] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.422972] ehci-pci: EHCI PCI platform driver [ 1.427471] tegra-ehci: Tegra EHCI driver [ 1.434349] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.439791] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.447588] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.478569] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.485402] hub 1-0:1.0: USB hub found [ 1.489212] hub 1-0:1.0: 1 port detected [ 1.494388] usbcore: registered new interface driver cdc_acm [ 1.500061] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.508111] usbcore: registered new interface driver cdc_wdm [ 1.513872] usbcore: registered new interface driver usb-storage [ 1.528313] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.535206] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.543051] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.550252] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.556771] i2c /dev entries driver [ 1.561553] usbcore: registered new interface driver uvcvideo [ 1.567291] USB Video Class driver (1.1.1) [ 1.571406] gspca_main: v2.14.0 registered [ 1.576147] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.586478] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.595412] sdhci: Secure Digital Host Controller Interface driver [ 1.601735] sdhci: Copyright(c) Pierre Ossman [ 1.606087] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.612095] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.616985] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.638277] mmc0: Unknown controller version (3). You may experience problems. [ 1.645558] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.682685] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.691098] usbcore: registered new interface driver usbhid [ 1.696705] usbhid: USB HID core driver [ 1.740665] mmc0: new high speed MMC card at address 0001 [ 1.751360] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.761056] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.772075] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.778222] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.787389] mmcblk0: p1 [ 2.139962] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.160308] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.171110] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.182381] NET: Registered protocol family 10 [ 2.188224] Segment Routing with IPv6 [ 2.192163] mip6: Mobile IPv6 [ 2.195130] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.202587] NET: Registered protocol family 17 [ 2.207042] NET: Registered protocol family 15 [ 2.211543] can: controller area network core (rev 20170425 abi 9) [ 2.217937] NET: Registered protocol family 29 [ 2.222398] can: raw protocol (rev 20170425) [ 2.226663] can: broadcast manager protocol (rev 20170425 t) [ 2.232338] can: netlink gateway (rev 20170425) max_hops=1 [ 2.237994] Bluetooth: RFCOMM socket layer initialized [ 2.243206] Bluetooth: RFCOMM ver 1.11 [ 2.246975] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.252305] Bluetooth: BNEP socket layer initialized [ 2.257263] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.263199] Bluetooth: HIDP socket layer initialized [ 2.268374] Key type dns_resolver registered [ 2.273225] Registering SWP/SWPB emulation handler [ 2.278837] Loading compiled-in X.509 certificates [ 2.303498] +3.3V_RUN: supplied by +3.3V_SYS [ 2.308589] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.313395] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.319304] +5V_USB_HS: supplied by +5V_SYS [ 2.324328] +3.3V_LP0: supplied by +3.3V_SYS [ 2.329813] +5V_HDMI_CON: supplied by +5V_SYS [ 2.334603] +5V_SATA: supplied by +5V_SYS [ 2.339080] +12V_SATA: supplied by +VDD_MUX [ 2.344671] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.351518] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.358506] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.366051] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.371687] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.380850] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.390157] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.398522] as3722-sd2: supplied by +5V_SYS [ 2.403059] as3722-sd3: supplied by +5V_SYS [ 2.407550] as3722-sd4: supplied by +5V_SYS [ 2.412238] as3722-sd5: supplied by +5V_SYS [ 2.417925] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.423755] as3722-ldo1: supplied by +3.3V_RUN [ 2.428510] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.434389] as3722-ldo3: supplied by +3.3V_SYS [ 2.439778] as3722-ldo4: supplied by +3.3V_SYS [ 2.444526] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.450413] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.459052] as3722-ldo6: supplied by +3.3V_RUN [ 2.464042] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.469461] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.476545] as3722-ldo9: supplied by +5V_SYS [ 2.482045] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.488820] as3722-ldo10: supplied by +5V_SYS [ 2.493923] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.500793] as3722-ldo11: supplied by +3.3V_RUN [ 2.506070] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.515354] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.524431] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.534999] scsi host0: tegra-ahci [ 2.539466] scsi host1: tegra-ahci [ 2.543179] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.551224] ata2: DUMMY [ 2.554975] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.560465] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.568305] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.598670] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.605788] hub 2-0:1.0: USB hub found [ 2.609659] hub 2-0:1.0: 1 port detected [ 2.689343] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.696767] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.702212] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 2.712359] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.721043] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 2.728408] hub 3-0:1.0: USB hub found [ 2.732285] hub 3-0:1.0: 6 ports detected [ 2.737185] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.742653] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 2.750410] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.759769] hub 4-0:1.0: USB hub found [ 2.763563] hub 4-0:1.0: 2 ports detected [ 2.769674] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.774601] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.787895] mmc1: Unknown controller version (3). You may experience problems. [ 2.795256] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.831807] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.839590] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.847483] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.855331] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.880188] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.881763] ata1: SATA link down (SStatus 0 SControl 300) [ 2.894060] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.908049] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.914358] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.920608] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.927586] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.934974] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.940529] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.946543] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.956250] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.966064] pci 0000:00:01.0: enabling Extended Tags [ 2.971095] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.980870] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.990707] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.997430] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.007543] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.013578] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.023276] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.033020] pci 0000:00:02.0: enabling Extended Tags [ 3.038025] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.047801] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.057617] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.064299] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.074353] PCI: bus0: Fast back to back transfers disabled [ 3.079958] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.088003] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.096288] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.102436] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.109539] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.128030] mmc1: new high speed SDHC card at address aaaa [ 3.138857] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.143609] PCI: bus1: Fast back to back transfers disabled [ 3.149254] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.156139] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.162502] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.168373] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.175348] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.182898] pci 0000:02:00.0: supports D1 D2 [ 3.187325] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.199361] mmcblk1: p1 p2 p3 [ 3.218713] PCI: bus2: Fast back to back transfers disabled [ 3.224292] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.231016] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.237800] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.244619] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.252396] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.258492] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.265836] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.270817] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.277612] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.285382] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.292718] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.298827] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.303788] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.309896] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.316677] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.324459] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.331576] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.337978] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.343924] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.351002] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.357364] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.363516] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.369151] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.400438] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9f425bd4, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397 [ 3.410113] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.422309] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.431547] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.438173] [drm] No driver support for vblank timestamp query. [ 3.578174] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.742345] Console: switching to colour frame buffer device 512x135 [ 3.838405] drm drm: fb0: frame buffer device [ 3.843078] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.850506] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.857831] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.866868] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.874293] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948) [ 3.883046] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.892694] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.899376] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.907976] cfg80211: failed to load regulatory.db [ 3.909685] +USB0_VBUS_SW: disabling [ 3.909701] +1.8V_RUN_CAM: disabling [ 3.912890] +2.8V_RUN_CAM: disabling [ 3.916485] +1.2V_RUN_CAM_FRONT: disabling [ 3.920089] +1.05V_RUN_CAM_REAR: disabling [ 3.923686] +3.3V_RUN_TOUCH: disabling [ 3.927788] +2.8V_RUN_CAM_AF: disabling [ 3.931911] +1.8V_RUN_VPP_FUSE: disabling [ 3.935712] ALSA device list: [ 3.935716] #0: tegra-hda at 0x70038000 irq 346 [ 3.935717] #1: NVIDIA Tegra Jetson TK1 [ 3.956049] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.012633] EXT4-fs (mmcblk0p1): recovery complete [ 4.018365] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.026561] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.037566] devtmpfs: mounted [ 4.041010] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#