U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.5 MiB/s done Bytes transferred = 6362264 (611498 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x611498 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171222-223245-g3514267 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Dec 21 21:48:29 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008019] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017552] Switching to timer-based delay loop, resolution 1000ns [ 0.024093] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029772] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040520] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048490] Switching to timer-based delay loop, resolution 83ns [ 0.054673] Console: colour dummy device 80x30 [ 0.058898] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073971] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080390] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087729] CPU: Testing write buffer coherency: ok [ 0.092400] /cpus/cpu@0 missing clock-frequency property [ 0.097553] /cpus/cpu@1 missing clock-frequency property [ 0.102849] /cpus/cpu@2 missing clock-frequency property [ 0.108127] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153454] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158108] Hierarchical SRCU implementation. [ 0.173682] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193458] smp: Bringing up secondary CPUs ... [ 0.243757] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323784] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403825] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413604] smp: Brought up 1 node, 4 CPUs [ 0.432681] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438840] CPU: All CPU(s) started in SVC mode. [ 0.444133] devtmpfs: initialized [ 0.453300] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458349] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.465969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475589] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.481868] pinctrl core: initialized pinctrl subsystem [ 0.487406] NET: Registered protocol family 16 [ 0.491812] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498710] cpuidle: using governor menu [ 0.509583] No ATAGs? [ 0.509643] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.517986] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.524664] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532346] iommu: Adding device 50000000.host1x to group 0 [ 0.537759] iommu: Adding device 54200000.dc to group 1 [ 0.542960] iommu: Adding device 54240000.dc to group 1 [ 0.548160] iommu: Adding device 57000000.gpu to group 2 [ 0.559151] +5V_SYS: supplied by +VDD_MUX [ 0.561375] +3.3V_SYS: supplied by +VDD_MUX [ 0.565699] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571037] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579141] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585077] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593190] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.598943] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607058] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.612810] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.620984] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.627803] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.635992] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.641844] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650445] vgaarb: loaded [ 0.652945] SCSI subsystem initialized [ 0.656493] libata version 3.00 loaded. [ 0.660343] usbcore: registered new interface driver usbfs [ 0.665698] usbcore: registered new interface driver hub [ 0.671015] usbcore: registered new device driver usb [ 0.677217] Linux video capture interface: v2.00 [ 0.680607] pps_core: LinuxPPS API ver. 1 registered [ 0.685542] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.694635] PTP clock support registered [ 0.698670] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.705895] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712072] Advanced Linux Sound Architecture Driver Initialized. [ 0.718270] Bluetooth: Core ver 2.22 [ 0.721594] NET: Registered protocol family 31 [ 0.726002] Bluetooth: HCI device and connection manager initialized [ 0.732325] Bluetooth: HCI socket layer initialized [ 0.737182] Bluetooth: L2CAP socket layer initialized [ 0.742218] Bluetooth: SCO socket layer initialized [ 0.747317] clocksource: Switched to clocksource arch_sys_counter [ 0.784709] NET: Registered protocol family 2 [ 0.787529] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.794797] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.801851] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.808275] TCP: Hash tables configured (established 8192 bind 8192) [ 0.814712] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.820464] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.826878] NET: Registered protocol family 1 [ 0.831390] RPC: Registered named UNIX socket transport module. [ 0.836982] RPC: Registered udp transport module. [ 0.841681] RPC: Registered tcp transport module. [ 0.846341] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.852999] PCI: CLS 0 bytes, default 64 [ 0.857368] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.865444] Initialise system trusted keyrings [ 0.869312] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.876113] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.881741] NFS: Registering the id_resolver key type [ 0.886474] Key type id_resolver registered [ 0.890651] Key type id_legacy registered [ 0.896285] Key type asymmetric registered [ 0.898709] Asymmetric key parser 'x509' registered [ 0.903594] bounce: pool size: 64 pages [ 0.907387] io scheduler noop registered (default) [ 0.912122] io scheduler mq-deadline registered [ 0.916629] io scheduler kyber registered [ 0.921279] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.933685] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.939795] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.948577] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.955334] console [ttyS0] disabled [ 0.958259] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.967169] console [ttyS0] enabled [ 0.967169] console [ttyS0] enabled [ 0.973403] bootconsole [earlycon0] disabled [ 0.973403] bootconsole [earlycon0] disabled [ 0.997575] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.004052] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.011569] panel-simple panel: panel supply power not found, using dummy regulator [ 1.022916] loop: module loaded [ 1.026605] as3722 4-0040: AS3722 with revision 0x1 found [ 1.036672] as3722-sd2: supplied by +5V_SYS [ 1.041107] as3722-sd3: supplied by +5V_SYS [ 1.045439] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.051636] as3722-sd4: supplied by +5V_SYS [ 1.055968] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.061722] as3722-sd5: supplied by +5V_SYS [ 1.067329] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.073073] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.079095] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.084721] as3722-ldo3: supplied by +3.3V_SYS [ 1.089181] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.096754] as3722-ldo4: supplied by +3.3V_SYS [ 1.101359] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.107389] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.112161] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.118859] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.124889] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.129670] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.136221] as3722-ldo9: supplied by +5V_SYS [ 1.140800] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.147003] as3722-ldo10: supplied by +5V_SYS [ 1.151520] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.157973] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.180416] cros-ec-spi spi0.0: Chrome EC device registered [ 1.195238] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.210758] libphy: Fixed MDIO Bus: probed [ 1.214843] CAN device driver interface [ 1.218696] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.225639] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.231252] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.238686] usbcore: registered new interface driver pegasus [ 1.244352] usbcore: registered new interface driver asix [ 1.249760] usbcore: registered new interface driver ax88179_178a [ 1.255855] usbcore: registered new interface driver cdc_ether [ 1.261709] usbcore: registered new interface driver smsc75xx [ 1.267472] usbcore: registered new interface driver smsc95xx [ 1.273219] usbcore: registered new interface driver net1080 [ 1.278886] usbcore: registered new interface driver cdc_subset [ 1.284806] usbcore: registered new interface driver zaurus [ 1.290396] usbcore: registered new interface driver cdc_ncm [ 1.296132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.302650] ehci-pci: EHCI PCI platform driver [ 1.307099] tegra-ehci: Tegra EHCI driver [ 1.311376] usbcore: registered new interface driver cdc_acm [ 1.317019] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.325028] usbcore: registered new interface driver cdc_wdm [ 1.330701] usbcore: registered new interface driver usb-storage [ 1.337381] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.357163] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.364031] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.370789] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.377936] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.384218] i2c /dev entries driver [ 1.388125] usbcore: registered new interface driver uvcvideo [ 1.393856] USB Video Class driver (1.1.1) [ 1.397947] gspca_main: v2.14.0 registered [ 1.402267] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.410929] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.419274] sdhci: Secure Digital Host Controller Interface driver [ 1.425437] sdhci: Copyright(c) Pierre Ossman [ 1.429791] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435562] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.447445] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.452316] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.471349] mmc0: Unknown controller version (3). You may experience problems. [ 1.478589] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.515351] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.523071] usbcore: registered new interface driver usbhid [ 1.528749] usbhid: USB HID core driver [ 1.534862] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.577814] max98090 0-0010: MAX98090 REVID=0x43 [ 1.584355] max98090 0-0010: use default 2.8v micbias [ 1.591911] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.598484] mmc0: new high speed MMC card at address 0001 [ 1.605701] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.611943] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.612143] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.614012] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.614135] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.617366] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.644555] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.652801] NET: Registered protocol family 10 [ 1.657760] Segment Routing with IPv6 [ 1.661473] mip6: Mobile IPv6 [ 1.664431] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.670884] NET: Registered protocol family 17 [ 1.675320] NET: Registered protocol family 15 [ 1.679760] can: controller area network core (rev 20170425 abi 9) [ 1.686004] NET: Registered protocol family 29 [ 1.690441] can: raw protocol (rev 20170425) [ 1.694697] can: broadcast manager protocol (rev 20170425 t) [ 1.700349] can: netlink gateway (rev 20170425) max_hops=1 [ 1.705887] Bluetooth: RFCOMM socket layer initialized [ 1.711027] Bluetooth: RFCOMM ver 1.11 [ 1.714772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.720078] Bluetooth: BNEP socket layer initialized [ 1.725028] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.730940] Bluetooth: HIDP socket layer initialized [ 1.735981] Key type dns_resolver registered [ 1.740440] Registering SWP/SWPB emulation handler [ 1.745497] Loading compiled-in X.509 certificates [ 1.757433] +3.3V_RUN: supplied by +3.3V_SYS [ 1.762339] +VDD_LED: supplied by +VDD_MUX [ 1.766527] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.772201] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.776902] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.781657] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.786832] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.791555] +5V_USB_HS: supplied by +5V_SYS [ 1.795878] +5V_USB_SS: supplied by +5V_SYS [ 1.800948] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.806288] +3.3V_LP0: supplied by +3.3V_SYS [ 1.811309] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.817140] +5V_HDMI_CON: supplied by +5V_SYS [ 1.822119] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.828862] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.842166] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.848415] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928038] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935434] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.940869] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950397] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959023] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965569] hub 1-0:1.0: USB hub found [ 1.969388] hub 1-0:1.0: 6 ports detected [ 1.973755] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979187] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.986880] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995551] hub 2-0:1.0: USB hub found [ 1.999363] hub 2-0:1.0: 2 ports detected [ 2.004402] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017575] mmc1: Unknown controller version (3). You may experience problems. [ 2.024821] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031282] mmc1: Switching to 3.3V signalling voltage failed [ 2.060051] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.067692] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.072563] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.082777] mmc2: Unknown controller version (3). You may experience problems. [ 2.090116] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.125844] mmc1: new high speed SDIO card at address 0001 [ 2.131671] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139275] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145436] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153712] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160417] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166654] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174778] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 2.183876] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.194035] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.200853] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.202917] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.202930] +1.8V_RUN_CAM: disabling [ 2.203079] +1.2V_RUN_CAM_FRONT: disabling [ 2.203205] +1.05V_RUN_CAM_REAR: disabling [ 2.203329] +2.8V_RUN_TOUCH: disabling [ 2.203451] +2.8V_RUN_CAM_AF: disabling [ 2.203572] +1.8V_RUN_VPP_FUSE: disabling [ 2.203696] +VDD_LED: disabling [ 2.203699] +5V_VDD_TS_SW: disabling [ 2.203705] +3.3V_PANEL: disabling [ 2.203708] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.203711] +5V_HDMI_CON: disabling [ 2.203713] ALSA device list: [ 2.203716] #1: GoogleNyanBig [ 2.261617] cfg80211: failed to load regulatory.db [ 2.317857] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.323932] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.332305] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.341274] panel-simple panel: panel supply power not found, using dummy regulator [ 2.357363] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.364286] mmc2: new high speed SDHC card at address 0007 [ 2.371690] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.384431] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.390657] GPT:3014591 != 15564799 [ 2.394135] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.401543] GPT:3014591 != 15564799 [ 2.405021] GPT: Use GNU Parted to correct GPT errors. [ 2.410224] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.417251] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.423504] panel-simple panel: panel supply power not found, using dummy regulator [ 2.700036] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.714920] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.724843] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.731205] panel-simple panel: panel supply power not found, using dummy regulator [ 2.743550] EXT4-fs (mmcblk0p3): recovery complete [ 2.750159] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.758304] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.764889] devtmpfs: mounted [ 2.768374] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.918037] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.923744] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.929077] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.934380] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.939689] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.944991] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.950301] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.955603] alloc_contig_range: [fbca1, fbca2) PFNs busy [ 2.960910] alloc_contig_range: [fbca2, fbca3) PFNs busy [ 2.966212] alloc_contig_range: [fbca3, fbca4) PFNs busy [ 3.117409] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.787821] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.798890] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.805053] panel-simple panel: panel supply power not found, using dummy regulator [ 4.147407] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.335829] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.342544] scsi host0: usb-storage 1-1:1.0 [ 4.347145] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.353407] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.398951] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.407632] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.413857] panel-simple panel: panel supply power not found, using dummy regulator [ 5.604993] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) rtcwake -d rtc1 -m mem -s 3 [ 5.614079] sd 0:0:0:0: [sda] Write Protect is off [ 5.620215] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.626062] sd 0:0:0:0: [sda] No Caching mode page found [ 5.631400] sd 0:0:0:0: [sda] Assuming drive cache: write through rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.656978] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.669690] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.681662] PM: suspend entry (deep) [ 5.685231] PM: Syncing filesystems ... done. [ 5.691230] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.699391] OOM killer disabled. [ 5.702612] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.711259] Suspending console(s) (use no_console_suspend to debug) [ 5.900882] Disabling non-boot CPUs ... [ 5.947529] IRQ17 no longer affine to CPU1 [ 6.058132] Entering suspend state LP1 [ 6.058157] Enabling non-boot CPUs ... [ 6.058910] CPU1 is up [ 6.059568] CPU2 is up [ 6.060265] CPU3 is up [ 6.101164] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.113500] mmc1: Switching to 3.3V signalling voltage failed [ 6.641938] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.642104] panel-simple panel: panel supply power not found, using dummy regulator [ 6.689566] OOM killer enabled. [ 6.692695] Restarting tasks ... done. [ 6.697252] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:32 1970 [ 7.827030] PM: suspend entry (deep) [ 7.830618] PM: Syncing filesystems ... done. [ 7.836164] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.844337] OOM killer disabled. [ 7.847574] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.856179] Suspending console(s) (use no_console_suspend to debug) [ 8.041242] Disabling non-boot CPUs ... [ 8.087479] IRQ17 no longer affine to CPU1 [ 8.247984] Entering suspend state LP1 [ 8.248009] Enabling non-boot CPUs ... [ 8.248786] CPU1 is up [ 8.249458] CPU2 is up [ 8.250169] CPU3 is up [ 8.291436] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.303360] mmc1: Switching to 3.3V signalling voltage failed [ 8.830913] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.831079] panel-simple panel: panel supply power not found, using dummy regulator [ 8.878610] OOM killer enabled. [ 8.881750] Restarting tasks ... done. [ 8.886328] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:37 1970 [ 10.016680] PM: suspend entry (deep) [ 10.020267] PM: Syncing filesystems ... done. [ 10.025899] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.034070] OOM killer disabled. [ 10.037292] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.045897] Suspending console(s) (use no_console_suspend to debug) [ 10.231261] Disabling non-boot CPUs ... [ 10.467419] IRQ17 no longer affine to CPU3 [ 10.467950] Entering suspend state LP1 [ 10.467975] Enabling non-boot CPUs ... [ 10.468774] CPU1 is up [ 10.469446] CPU2 is up [ 10.470157] CPU3 is up [ 10.511097] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.523234] mmc1: Switching to 3.3V signalling voltage failed [ 10.737769] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.057155] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.057360] panel-simple panel: panel supply power not found, using dummy regulator [ 11.111755] OOM killer enabled. [ 11.114895] Restarting tasks ... done. [ 11.119266] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:42 1970 [ 12.236901] PM: suspend entry (deep) [ 12.240507] PM: Syncing filesystems ... done. [ 12.246273] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.254450] OOM killer disabled. [ 12.257699] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.266350] Suspending console(s) (use no_console_suspend to debug) [ 12.450452] Disabling non-boot CPUs ... [ 12.627985] Entering suspend state LP1 [ 12.628011] Enabling non-boot CPUs ... [ 12.628808] CPU1 is up [ 12.629481] CPU2 is up [ 12.630196] CPU3 is up [ 12.671181] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.683320] mmc1: Switching to 3.3V signalling voltage failed [ 12.897746] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.212188] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.212355] panel-simple panel: panel supply power not found, using dummy regulator [ 13.262754] OOM killer enabled. [ 13.265887] Restarting tasks ... done. [ 13.270244] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 14.396995] PM: suspend entry (deep) [ 14.400594] PM: Syncing filesystems ... done. [ 14.406279] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.414455] OOM killer disabled. [ 14.417692] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.426293] Suspending console(s) (use no_console_suspend to debug) [ 14.611221] Disabling non-boot CPUs ... [ 14.787880] Entering suspend state LP1 [ 14.787905] Enabling non-boot CPUs ... [ 14.788704] CPU1 is up [ 14.789378] CPU2 is up [ 14.790093] CPU3 is up [ 14.831251] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.843304] mmc1: Switching to 3.3V signalling voltage failed [ 15.057719] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.372944] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.373111] panel-simple panel: panel supply power not found, using dummy regulator [ 15.423451] OOM killer enabled. [ 15.426591] Restarting tasks ... done. [ 15.430862] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 16.556563] PM: suspend entry (deep) [ 16.560161] PM: Syncing filesystems ... done. [ 16.565846] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.574037] OOM killer disabled. [ 16.577258] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.585856] Suspending console(s) (use no_console_suspend to debug) [ 16.770417] Disabling non-boot CPUs ... [ 16.917875] Entering suspend state LP1 [ 16.917900] Enabling non-boot CPUs ... [ 16.918696] CPU1 is up [ 16.919370] CPU2 is up [ 16.920079] CPU3 is up [ 16.961511] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.973530] mmc1: Switching to 3.3V signalling voltage failed [ 17.187698] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.507720] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.507886] panel-simple panel: panel supply power not found, using dummy regulator [ 17.558209] OOM killer enabled. [ 17.561350] Restarting tasks ... done. [ 17.565689] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 18.686527] PM: suspend entry (deep) [ 18.690127] PM: Syncing filesystems ... done. [ 18.695806] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.704004] OOM killer disabled. [ 18.707225] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.715826] Suspending console(s) (use no_console_suspend to debug) [ 18.901168] Disabling non-boot CPUs ... [ 19.067851] Entering suspend state LP1 [ 19.067876] Enabling non-boot CPUs ... [ 19.068675] CPU1 is up [ 19.069345] CPU2 is up [ 19.070058] CPU3 is up [ 19.111195] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.123440] mmc1: Switching to 3.3V signalling voltage failed [ 19.650196] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.650363] panel-simple panel: panel supply power not found, using dummy regulator [ 19.693733] OOM killer enabled. [ 19.696862] Restarting tasks ... done. [ 19.701164] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 20.836878] PM: suspend entry (deep) [ 20.840477] PM: Syncing filesystems ... done. [ 20.846229] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.854403] OOM killer disabled. [ 20.857639] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.866224] Suspending console(s) (use no_console_suspend to debug) [ 21.050985] Disabling non-boot CPUs ... [ 21.227829] Entering suspend state LP1 [ 21.227854] Enabling non-boot CPUs ... [ 21.228655] CPU1 is up [ 21.229326] CPU2 is up [ 21.230043] CPU3 is up [ 21.271226] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.283277] mmc1: Switching to 3.3V signalling voltage failed [ 21.812198] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.812365] panel-simple panel: panel supply power not found, using dummy regulator [ 21.855794] OOM killer enabled. [ 21.858955] Restarting tasks ... done. [ 21.863616] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 22.996927] PM: suspend entry (deep) [ 23.000517] PM: Syncing filesystems ... done. [ 23.006164] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.014340] OOM killer disabled. [ 23.017577] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.026178] Suspending console(s) (use no_console_suspend to debug) [ 23.210808] Disabling non-boot CPUs ... [ 23.257306] IRQ17 no longer affine to CPU1 [ 23.357835] Entering suspend state LP1 [ 23.357860] Enabling non-boot CPUs ... [ 23.358659] CPU1 is up [ 23.359333] CPU2 is up [ 23.360044] CPU3 is up [ 23.401057] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.413485] mmc1: Switching to 3.3V signalling voltage failed [ 23.943161] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.943327] panel-simple panel: panel supply power not found, using dummy regulator [ 23.990858] OOM killer enabled. [ 23.993998] Restarting tasks ... done. [ 23.998349] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:12 1970 [ 25.126903] PM: suspend entry (deep) [ 25.130493] PM: Syncing filesystems ... done. [ 25.135990] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.144140] OOM killer disabled. [ 25.147377] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.155979] Suspending console(s) (use no_console_suspend to debug) [ 25.340518] Disabling non-boot CPUs ... [ 25.507780] Entering suspend state LP1 [ 25.507805] Enabling non-boot CPUs ... [ 25.508604] CPU1 is up [ 25.509280] CPU2 is up [ 25.509984] CPU3 is up [ 25.551096] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.563265] mmc1: Switching to 3.3V signalling voltage failed [ 26.092026] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.092193] panel-simple panel: panel supply power not found, using dummy regulator [ 26.135653] OOM killer enabled. [ 26.138820] Restarting tasks ... done. [ 26.143264] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE