U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 3.3 MiB/s done Bytes transferred = 8081920 (7b5200 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7b5200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171222-341486-g3514267557aa (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Dec 21 21:48:37 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39040 r8192 d22400 u69632 [ 0.000000] pcpu-alloc: s39040 r8192 d22400 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993496K/2097148K available (11264K kernel code, 1561K rwdata, 4320K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1562 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 405 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000010] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000016] Switching to timer-based delay loop, resolution 1000ns [ 0.001848] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001856] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001863] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001868] Switching to timer-based delay loop, resolution 83ns [ 0.002083] Console: colour dummy device 80x30 [ 0.002099] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002106] pid_max: default: 32768 minimum: 301 [ 0.002150] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002156] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002359] CPU: Testing write buffer coherency: ok [ 0.002490] /cpus/cpu@0 missing clock-frequency property [ 0.002506] /cpus/cpu@1 missing clock-frequency property [ 0.002521] /cpus/cpu@2 missing clock-frequency property [ 0.002537] /cpus/cpu@3 missing clock-frequency property [ 0.002542] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002659] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003378] Hierarchical SRCU implementation. [ 0.004088] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004395] EFI services will not be available. [ 0.004457] smp: Bringing up secondary CPUs ... [ 0.004748] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012125] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022127] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031853] smp: Brought up 1 node, 4 CPUs [ 0.031861] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031865] CPU: All CPU(s) started in SVC mode. [ 0.032417] devtmpfs: initialized [ 0.037702] Built 1 zonelists, mobility grouping on. Total pages: 514758 [ 0.037856] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038095] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038190] pinctrl core: initialized pinctrl subsystem [ 0.038760] DMI not present or invalid. [ 0.038866] NET: Registered protocol family 16 [ 0.039566] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040493] cpuidle: using governor menu [ 0.048756] No ATAGs? [ 0.048811] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048818] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051694] Serial: AMBA PL011 UART driver [ 0.052128] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052256] iommu: Adding device 50000000.host1x to group 0 [ 0.052284] iommu: Adding device 54200000.dc to group 1 [ 0.052304] iommu: Adding device 54240000.dc to group 1 [ 0.052335] iommu: Adding device 57000000.gpu to group 2 [ 0.057466] AT91: Could not find identification node [ 0.057672] +5V_SYS: supplied by +VDD_MUX [ 0.057770] +3.3V_SYS: supplied by +VDD_MUX [ 0.057985] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.057991] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058024] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058028] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058060] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058065] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058096] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058100] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058185] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058189] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058221] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058225] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059179] vgaarb: loaded [ 0.059445] SCSI subsystem initialized [ 0.059516] libata version 3.00 loaded. [ 0.059590] usbcore: registered new interface driver usbfs [ 0.059607] usbcore: registered new interface driver hub [ 0.059632] usbcore: registered new device driver usb [ 0.060894] pps_core: LinuxPPS API ver. 1 registered [ 0.060898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.060905] PTP clock support registered [ 0.060970] EDAC MC: Ver: 3.0.0 [ 0.061421] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.061431] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.061867] clocksource: Switched to clocksource arch_sys_counter [ 0.079747] NET: Registered protocol family 2 [ 0.079945] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.079957] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.079991] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.080053] TCP: Hash tables configured (established 8192 bind 8192) [ 0.080087] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.080103] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.080160] NET: Registered protocol family 1 [ 0.080316] RPC: Registered named UNIX socket transport module. [ 0.080320] RPC: Registered udp transport module. [ 0.080323] RPC: Registered tcp transport module. [ 0.080326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.080332] PCI: CLS 0 bytes, default 64 [ 0.080901] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.081486] Initialise system trusted keyrings [ 0.081545] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.083865] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.084085] NFS: Registering the id_resolver key type [ 0.084094] Key type id_resolver registered [ 0.084098] Key type id_legacy registered [ 0.084114] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.084651] Key type asymmetric registered [ 0.084656] Asymmetric key parser 'x509' registered [ 0.084677] bounce: pool size: 64 pages [ 0.084696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.084700] io scheduler noop registered [ 0.084703] io scheduler deadline registered [ 0.084783] io scheduler cfq registered (default) [ 0.084787] io scheduler mq-deadline registered [ 0.084790] io scheduler kyber registered [ 0.086168] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.096969] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.098141] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.115045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.116090] console [ttyS0] disabled [ 0.116108] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.050388] console [ttyS0] enabled [ 1.054172] SuperH (H)SCI(F) driver initialized [ 1.059059] msm_serial: driver initialized [ 1.063214] STMicroelectronics ASC driver initialized [ 1.070343] Failed to attached device 54200000.dc to IOMMU_mapping [ 1.084664] Failed to attached device 54240000.dc to IOMMU_mapping [ 1.099114] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.105593] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.113075] panel-simple panel: panel supply power not found, using dummy regulator [ 1.123475] brd: module loaded [ 1.128946] loop: module loaded [ 1.132997] as3722 4-0040: AS3722 with revision 0x1 found [ 1.142931] as3722-sd2: supplied by +5V_SYS [ 1.147325] as3722-sd3: supplied by +5V_SYS [ 1.151651] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.157841] as3722-sd4: supplied by +5V_SYS [ 1.162177] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.167903] as3722-sd5: supplied by +5V_SYS [ 1.173490] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.179205] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.185210] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.190805] as3722-ldo3: supplied by +3.3V_SYS [ 1.195258] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.202822] as3722-ldo4: supplied by +3.3V_SYS [ 1.207410] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.213412] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.218175] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.224850] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.230864] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.235637] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.242171] as3722-ldo9: supplied by +5V_SYS [ 1.246730] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.252920] as3722-ldo10: supplied by +5V_SYS [ 1.257428] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.263854] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.282480] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.288142] libphy: Fixed MDIO Bus: probed [ 1.292561] CAN device driver interface [ 1.296697] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.302805] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.308621] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.314547] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.321490] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.328366] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.335770] usbcore: registered new interface driver pegasus [ 1.341426] usbcore: registered new interface driver asix [ 1.346824] usbcore: registered new interface driver ax88179_178a [ 1.352916] usbcore: registered new interface driver cdc_ether [ 1.358747] usbcore: registered new interface driver smsc75xx [ 1.364498] usbcore: registered new interface driver smsc95xx [ 1.370237] usbcore: registered new interface driver net1080 [ 1.375896] usbcore: registered new interface driver cdc_subset [ 1.381807] usbcore: registered new interface driver zaurus [ 1.387386] usbcore: registered new interface driver cdc_ncm [ 1.393713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.400223] ehci-pci: EHCI PCI platform driver [ 1.404671] ehci-platform: EHCI generic platform driver [ 1.409949] ehci-orion: EHCI orion driver [ 1.414009] SPEAr-ehci: EHCI SPEAr driver [ 1.418053] ehci-st: EHCI STMicroelectronics driver [ 1.422969] ehci-exynos: EHCI EXYNOS driver [ 1.427191] ehci-atmel: EHCI Atmel driver [ 1.431234] tegra-ehci: Tegra EHCI driver [ 1.435299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.441467] ohci-pci: OHCI PCI platform driver [ 1.445917] ohci-platform: OHCI generic platform driver [ 1.451190] SPEAr-ohci: OHCI SPEAr driver [ 1.455240] ohci-st: OHCI STMicroelectronics driver [ 1.460150] ohci-atmel: OHCI Atmel driver [ 1.464404] usbcore: registered new interface driver usb-storage [ 1.471748] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.480404] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.487274] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.494221] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.501356] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.507720] i2c /dev entries driver [ 1.513604] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.525005] sdhci: Secure Digital Host Controller Interface driver [ 1.531169] sdhci: Copyright(c) Pierre Ossman [ 1.536099] Synopsys Designware Multimedia Card Interface Driver [ 1.542600] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.548533] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.561969] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.566839] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.585880] mmc0: Unknown controller version (3). You may experience problems. [ 1.593121] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.629829] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.637982] ledtrig-cpu: registered to indicate activity on CPUs [ 1.644040] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.644117] usbcore: registered new interface driver usbhid [ 1.644119] usbhid: USB HID core driver [ 1.646055] NET: Registered protocol family 10 [ 1.646474] Segment Routing with IPv6 [ 1.646503] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.646751] NET: Registered protocol family 17 [ 1.646756] can: controller area network core (rev 20170425 abi 9) [ 1.646786] NET: Registered protocol family 29 [ 1.646790] can: raw protocol (rev 20170425) [ 1.646793] can: broadcast manager protocol (rev 20170425 t) [ 1.646798] can: netlink gateway (rev 20170425) max_hops=1 [ 1.646959] Key type dns_resolver registered [ 1.653994] ThumbEE CPU extension supported. [ 1.654000] Registering SWP/SWPB emulation handler [ 1.654290] Loading compiled-in X.509 certificates [ 1.671484] +3.3V_RUN: supplied by +3.3V_SYS [ 1.682358] +VDD_LED: supplied by +VDD_MUX [ 1.682457] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.682497] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.682543] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.682583] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.682768] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.683008] +5V_USB_HS: supplied by +5V_SYS [ 1.683250] +5V_USB_SS: supplied by +5V_SYS [ 1.702540] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.721396] +3.3V_LP0: supplied by +3.3V_SYS [ 1.735035] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.735323] +5V_HDMI_CON: supplied by +5V_SYS [ 1.736145] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.736206] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.744569] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.745719] panel-simple panel: panel supply power not found, using dummy regulator [ 1.747108] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.755441] mmc1: Unknown controller version (3). You may experience problems. [ 1.755484] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.755951] mmc1: Switching to 3.3V signalling voltage failed [ 1.781194] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.782312] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.782321] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.790645] mmc2: Unknown controller version (3). You may experience problems. [ 1.790699] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.822244] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 1.823021] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.823866] panel-simple panel: panel supply power not found, using dummy regulator [ 1.825216] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.826394] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.827360] panel-simple panel: panel supply power not found, using dummy regulator [ 1.837687] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 1.838086] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 1.838096] +1.05V_RUN: disabling [ 1.845181] +1.8V_RUN_CAM: disabling [ 1.850064] +3.3V_RUN_CAM: disabling [ 1.854975] +1.2V_RUN_CAM_FRONT: disabling [ 1.862224] +1.05V_RUN_CAM_REAR: disabling [ 1.868233] +2.8V_RUN_TOUCH: disabling [ 1.875657] +2.8V_RUN_CAM_AF: disabling [ 1.881666] +1.8V_RUN_VPP_FUSE: disabling [ 1.889348] +VDD_LED: disabling [ 1.889352] +5V_VDD_TS_SW: disabling [ 1.889356] +5V_USB_HS: disabling [ 1.889359] +5V_USB_SS: disabling [ 1.889361] +3.3V_PANEL: disabling [ 1.889364] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 1.889367] +5V_HDMI_CON: disabling [ ad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1 [ 1.984080] Waiting for root device PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023... [ 1.984763] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.985593] panel-simple panel: panel supply power not found, using dummy regulator [ 2.026006] elan_i2c 1-0015: invalid report id data (ff) [ 2.037278] mmc1: new high speed SDIO card at address 0001 [ 2.049953] mmc0: new high speed MMC card at address 0001 [ 2.055652] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.060321] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.066458] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.072543] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0) [ 2.084072] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.092538] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.099107] panel-simple panel: panel supply power not found, using dummy regulator [ 2.132819] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.141437] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.143877] mmc2: new high speed SDHC card at address 0007 [ 2.144229] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.168363] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.174552] GPT:3014591 != 15564799 [ 2.178031] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.185434] GPT:3014591 != 15564799 [ 2.188911] GPT: Use GNU Parted to correct GPT errors. [ 2.194083] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.201106] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.207686] panel-simple panel: panel supply power not found, using dummy regulator [ 2.536961] EXT4-fs (mmcblk0p3): recovery complete [ 2.545087] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.553224] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.559817] devtmpfs: mounted [ 2.563508] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#