U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 876 KiB/s done Bytes transferred = 6360056 (610bf8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 866.2 KiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x610bf8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171221-222604-g0e08c46 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Dec 20 21:04:12 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008024] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017555] Switching to timer-based delay loop, resolution 1000ns [ 0.024074] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029776] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040523] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048494] Switching to timer-based delay loop, resolution 83ns [ 0.054673] Console: colour dummy device 80x30 [ 0.058902] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069212] pid_max: default: 32768 minimum: 301 [ 0.073981] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080393] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087735] CPU: Testing write buffer coherency: ok [ 0.092406] /cpus/cpu@0 missing clock-frequency property [ 0.097557] /cpus/cpu@1 missing clock-frequency property [ 0.102853] /cpus/cpu@2 missing clock-frequency property [ 0.108131] /cpus/cpu@3 missing clock-frequency property [ 0.113413] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153458] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158113] Hierarchical SRCU implementation. [ 0.173673] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193460] smp: Bringing up secondary CPUs ... [ 0.243761] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323790] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403830] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413606] smp: Brought up 1 node, 4 CPUs [ 0.432683] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438841] CPU: All CPU(s) started in SVC mode. [ 0.444126] devtmpfs: initialized [ 0.453567] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458610] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466233] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475857] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482146] pinctrl core: initialized pinctrl subsystem [ 0.487668] NET: Registered protocol family 16 [ 0.492079] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498991] cpuidle: using governor menu [ 0.510069] No ATAGs? [ 0.510130] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518471] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525156] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532832] iommu: Adding device 50000000.host1x to group 0 [ 0.538246] iommu: Adding device 54200000.dc to group 1 [ 0.543447] iommu: Adding device 54240000.dc to group 1 [ 0.548647] iommu: Adding device 57000000.gpu to group 2 [ 0.559783] +5V_SYS: supplied by +VDD_MUX [ 0.562007] +3.3V_SYS: supplied by +VDD_MUX [ 0.566329] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571669] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579771] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585709] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593822] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599575] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607702] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613442] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621614] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628435] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636623] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642475] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.651079] vgaarb: loaded [ 0.653577] SCSI subsystem initialized [ 0.657128] libata version 3.00 loaded. [ 0.660977] usbcore: registered new interface driver usbfs [ 0.666330] usbcore: registered new interface driver hub [ 0.671648] usbcore: registered new device driver usb [ 0.677854] Linux video capture interface: v2.00 [ 0.681240] pps_core: LinuxPPS API ver. 1 registered [ 0.686174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695267] PTP clock support registered [ 0.699304] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706527] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712706] Advanced Linux Sound Architecture Driver Initialized. [ 0.718907] Bluetooth: Core ver 2.22 [ 0.722226] NET: Registered protocol family 31 [ 0.726635] Bluetooth: HCI device and connection manager initialized [ 0.732956] Bluetooth: HCI socket layer initialized [ 0.737815] Bluetooth: L2CAP socket layer initialized [ 0.742850] Bluetooth: SCO socket layer initialized [ 0.747946] clocksource: Switched to clocksource arch_sys_counter [ 0.785332] NET: Registered protocol family 2 [ 0.788158] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.795420] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.802472] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.808897] TCP: Hash tables configured (established 8192 bind 8192) [ 0.815330] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.821085] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827503] NET: Registered protocol family 1 [ 0.832017] RPC: Registered named UNIX socket transport module. [ 0.837604] RPC: Registered udp transport module. [ 0.842304] RPC: Registered tcp transport module. [ 0.846964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853621] PCI: CLS 0 bytes, default 64 [ 0.857982] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.866084] Initialise system trusted keyrings [ 0.869931] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.876746] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.882365] NFS: Registering the id_resolver key type [ 0.887097] Key type id_resolver registered [ 0.891274] Key type id_legacy registered [ 0.896929] Key type asymmetric registered [ 0.899332] Asymmetric key parser 'x509' registered [ 0.904217] bounce: pool size: 64 pages [ 0.908014] io scheduler noop registered (default) [ 0.912745] io scheduler mq-deadline registered [ 0.917251] io scheduler kyber registered [ 0.921898] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.934256] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.940360] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.949148] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.955915] console [ttyS0] disabled [ 0.958828] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.967739] console [ttyS0] enabled [ 0.967739] console [ttyS0] enabled [ 0.973974] bootconsole [earlycon0] disabled [ 0.973974] bootconsole [earlycon0] disabled [ 0.998205] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.004674] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.012174] panel-simple panel: panel supply power not found, using dummy regulator [ 1.023512] loop: module loaded [ 1.027205] as3722 4-0040: AS3722 with revision 0x1 found [ 1.037285] as3722-sd2: supplied by +5V_SYS [ 1.041720] as3722-sd3: supplied by +5V_SYS [ 1.046052] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.052249] as3722-sd4: supplied by +5V_SYS [ 1.056583] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.062339] as3722-sd5: supplied by +5V_SYS [ 1.067935] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.073700] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.079724] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.085353] as3722-ldo3: supplied by +3.3V_SYS [ 1.089814] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.097387] as3722-ldo4: supplied by +3.3V_SYS [ 1.101993] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.108028] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.112797] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.119498] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.125529] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.130309] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.136862] as3722-ldo9: supplied by +5V_SYS [ 1.141442] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.147645] as3722-ldo10: supplied by +5V_SYS [ 1.152162] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.158614] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.181147] cros-ec-spi spi0.0: Chrome EC device registered [ 1.195974] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.211496] libphy: Fixed MDIO Bus: probed [ 1.215582] CAN device driver interface [ 1.219433] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.226377] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.231991] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.239425] usbcore: registered new interface driver pegasus [ 1.245092] usbcore: registered new interface driver asix [ 1.250500] usbcore: registered new interface driver ax88179_178a [ 1.256593] usbcore: registered new interface driver cdc_ether [ 1.262449] usbcore: registered new interface driver smsc75xx [ 1.268211] usbcore: registered new interface driver smsc95xx [ 1.273959] usbcore: registered new interface driver net1080 [ 1.279627] usbcore: registered new interface driver cdc_subset [ 1.285547] usbcore: registered new interface driver zaurus [ 1.291141] usbcore: registered new interface driver cdc_ncm [ 1.296874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.303392] ehci-pci: EHCI PCI platform driver [ 1.307843] tegra-ehci: Tegra EHCI driver [ 1.312115] usbcore: registered new interface driver cdc_acm [ 1.317758] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.325767] usbcore: registered new interface driver cdc_wdm [ 1.331441] usbcore: registered new interface driver usb-storage [ 1.338113] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.357724] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.364591] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.371355] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.378501] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.384783] i2c /dev entries driver [ 1.388691] usbcore: registered new interface driver uvcvideo [ 1.394421] USB Video Class driver (1.1.1) [ 1.398511] gspca_main: v2.14.0 registered [ 1.402831] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.411499] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.419842] sdhci: Secure Digital Host Controller Interface driver [ 1.426007] sdhci: Copyright(c) Pierre Ossman [ 1.430362] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436129] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.448072] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.452943] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.471978] mmc0: Unknown controller version (3). You may experience problems. [ 1.479219] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.515986] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.523704] usbcore: registered new interface driver usbhid [ 1.529381] usbhid: USB HID core driver [ 1.535480] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.578442] max98090 0-0010: MAX98090 REVID=0x43 [ 1.584982] max98090 0-0010: use default 2.8v micbias [ 1.592537] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.599109] mmc0: new high speed MMC card at address 0001 [ 1.606337] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.612592] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.612777] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.614653] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.614771] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.618031] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.645206] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.653446] NET: Registered protocol family 10 [ 1.658406] Segment Routing with IPv6 [ 1.662118] mip6: Mobile IPv6 [ 1.665076] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.671545] NET: Registered protocol family 17 [ 1.675982] NET: Registered protocol family 15 [ 1.680422] can: controller area network core (rev 20170425 abi 9) [ 1.686661] NET: Registered protocol family 29 [ 1.691098] can: raw protocol (rev 20170425) [ 1.695355] can: broadcast manager protocol (rev 20170425 t) [ 1.701007] can: netlink gateway (rev 20170425) max_hops=1 [ 1.706547] Bluetooth: RFCOMM socket layer initialized [ 1.711687] Bluetooth: RFCOMM ver 1.11 [ 1.715432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.720739] Bluetooth: BNEP socket layer initialized [ 1.725688] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.731601] Bluetooth: HIDP socket layer initialized [ 1.736643] Key type dns_resolver registered [ 1.741104] Registering SWP/SWPB emulation handler [ 1.746168] Loading compiled-in X.509 certificates [ 1.758077] +3.3V_RUN: supplied by +3.3V_SYS [ 1.762985] +VDD_LED: supplied by +VDD_MUX [ 1.767175] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.772827] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.777471] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.782227] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.787400] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.792127] +5V_USB_HS: supplied by +5V_SYS [ 1.796450] +5V_USB_SS: supplied by +5V_SYS [ 1.801488] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.806836] +3.3V_LP0: supplied by +3.3V_SYS [ 1.811853] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.817686] +5V_HDMI_CON: supplied by +5V_SYS [ 1.822671] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.829414] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.842705] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.848949] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928708] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.936105] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941526] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.951049] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959703] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.966227] hub 1-0:1.0: USB hub found [ 1.970045] hub 1-0:1.0: 6 ports detected [ 1.974425] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979853] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.987539] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.996218] hub 2-0:1.0: USB hub found [ 2.000030] hub 2-0:1.0: 2 ports detected [ 2.005075] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.018242] mmc1: Unknown controller version (3). You may experience problems. [ 2.025499] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031959] mmc1: Switching to 3.3V signalling voltage failed [ 2.060705] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.068354] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.073227] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083424] mmc2: Unknown controller version (3). You may experience problems. [ 2.090760] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126445] mmc1: new high speed SDIO card at address 0001 [ 2.132257] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139810] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145967] panel-simple panel: panel supply power not found, using dummy regulator [ 2.154341] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.161115] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.167350] panel-simple panel: panel supply power not found, using dummy regulator [ 2.175013] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:29 UTC (946684829) [ 2.175171] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.176986] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.177268] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.177279] +1.8V_RUN_CAM: disabling [ 2.177428] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.177433] cfg80211: failed to load regulatory.db [ 2.177475] +1.2V_RUN_CAM_FRONT: disabling [ 2.177585] +1.05V_RUN_CAM_REAR: disabling [ 2.177692] +2.8V_RUN_TOUCH: disabling [ 2.177800] +2.8V_RUN_CAM_AF: disabling [ 2.177908] +1.8V_RUN_VPP_FUSE: disabling [ 2.178022] +VDD_LED: disabling [ 2.178027] +5V_VDD_TS_SW: disabling [ 2.178039] +3.3V_PANEL: disabling [ 2.178046] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.178051] +5V_HDMI_CON: disabling [ 2.178055] ALSA device list: [ 2.178058] #1: GoogleNyanBig [ 2.308399] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.314622] panel-simple panel: panel supply power not found, using dummy regulator [ 2.322828] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.332277] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.389658] mmc2: new high speed SDHC card at address 0007 [ 2.396978] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.409692] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.415864] GPT:3014591 != 15564799 [ 2.419410] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.426168] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.433649] GPT:3014591 != 15564799 [ 2.437133] GPT: Use GNU Parted to correct GPT errors. [ 2.442313] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.450292] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.456454] panel-simple panel: panel supply power not found, using dummy regulator [ 2.617560] EXT4-fs (mmcblk0p3): recovery complete [ 2.625683] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.633825] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.640447] devtmpfs: mounted [ 2.643857] Freeing unused kernel memory: 1024K [ 2.676761] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.682152] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.687703] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.693216] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.698900] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.704211] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.710398] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.716070] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.721461] alloc_contig_range: [fbc7f, fbc80) PFNs busy bash: cannot set terminal process group [ 2.726980] alloc_contig_range: [fbca1, fbca2) PFNs busy (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.810148] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.825038] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.834746] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.840934] panel-simple panel: panel supply power not found, using dummy regulator [ 3.178037] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.847336] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.858431] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.864596] panel-simple panel: panel supply power not found, using dummy regulator [ 4.208038] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.396436] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.403348] scsi host0: usb-storage 1-1:1.0 [ 4.407978] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.414139] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.479602] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.488304] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.494528] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... [ 5.685135] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.693601] sd 0:0:0:0: [sda] Write Protect is off [ 5.698485] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 rtcwake: wakeup from "mem" using /dev/rt[ 5.704366] sd 0:0:0:0: [sda] No Caching mode page found c1 at Thu Jan 1 00:00:34 1970 [ 5.712388] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.740555] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.753756] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.762161] PM: suspend entry (deep) [ 5.765729] PM: Syncing filesystems ... done. [ 5.771407] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.779551] OOM killer disabled. [ 5.782778] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.791411] Suspending console(s) (use no_console_suspend to debug) [ 5.981761] Disabling non-boot CPUs ... [ 6.088126] IRQ17 no longer affine to CPU2 [ 6.148621] Entering suspend state LP1 [ 6.148647] Enabling non-boot CPUs ... [ 6.149409] CPU1 is up [ 6.150071] CPU2 is up [ 6.150767] CPU3 is up [ 6.191748] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.203730] mmc1: Switching to 3.3V signalling voltage failed [ 6.418466] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.732763] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.732931] panel-simple panel: panel supply power not found, using dummy regulator [ 6.787304] OOM killer enabled. [ 6.790462] Restarting tasks ... done. [ 6.795002] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 7.867949] PM: suspend entry (deep) [ 7.871516] PM: Syncing filesystems ... done. [ 7.877251] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.885427] OOM killer disabled. [ 7.888662] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.897271] Suspending console(s) (use no_console_suspend to debug) [ 8.081613] Disabling non-boot CPUs ... [ 8.258594] Entering suspend state LP1 [ 8.258620] Enabling non-boot CPUs ... [ 8.259424] CPU1 is up [ 8.260094] CPU2 is up [ 8.260809] CPU3 is up [ 8.302192] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.314111] mmc1: Switching to 3.3V signalling voltage failed [ 8.528424] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.841680] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.841847] panel-simple panel: panel supply power not found, using dummy regulator [ 8.892082] OOM killer enabled. [ 8.895211] Restarting tasks ... done. [ 8.899797] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 9.977685] PM: suspend entry (deep) [ 9.981277] PM: Syncing filesystems ... done. [ 9.986969] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.995119] OOM killer disabled. [ 9.998357] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.006957] Suspending console(s) (use no_console_suspend to debug) [ 10.191415] Disabling non-boot CPUs ... [ 10.348657] Entering suspend state LP1 [ 10.348683] Enabling non-boot CPUs ... [ 10.349488] CPU1 is up [ 10.350163] CPU2 is up [ 10.350877] CPU3 is up [ 10.392329] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.404332] mmc1: Switching to 3.3V signalling voltage failed [ 10.618359] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.931726] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.931891] panel-simple panel: panel supply power not found, using dummy regulator [ 10.982184] OOM killer enabled. [ 10.985323] Restarting tasks ... done. [ 10.989629] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 12.067245] PM: suspend entry (deep) [ 12.070834] PM: Syncing filesystems ... done. [ 12.076454] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.084627] OOM killer disabled. [ 12.087843] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.096454] Suspending console(s) (use no_console_suspend to debug) [ 12.281663] Disabling non-boot CPUs ... [ 12.448582] Entering suspend state LP1 [ 12.448607] Enabling non-boot CPUs ... [ 12.449413] CPU1 is up [ 12.450088] CPU2 is up [ 12.450803] CPU3 is up [ 12.492342] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.504353] mmc1: Switching to 3.3V signalling voltage failed [ 12.718379] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.033214] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.033381] panel-simple panel: panel supply power not found, using dummy regulator [ 13.083668] OOM killer enabled. [ 13.086807] Restarting tasks ... done. [ 13.091261] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 14.167184] PM: suspend entry (deep) [ 14.170772] PM: Syncing filesystems ... done. [ 14.176399] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.184572] OOM killer disabled. [ 14.187788] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.196413] Suspending console(s) (use no_console_suspend to debug) [ 14.381830] Disabling non-boot CPUs ... [ 14.558522] Entering suspend state LP1 [ 14.558548] Enabling non-boot CPUs ... [ 14.559357] CPU1 is up [ 14.560027] CPU2 is up [ 14.560739] CPU3 is up [ 14.602042] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.614111] mmc1: Switching to 3.3V signalling voltage failed [ 14.828351] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.143183] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.143351] panel-simple panel: panel supply power not found, using dummy regulator [ 15.193584] OOM killer enabled. [ 15.196713] Restarting tasks ... done. [ 15.201001] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 16.277923] PM: suspend entry (deep) [ 16.281491] PM: Syncing filesystems ... done. [ 16.287161] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.295340] OOM killer disabled. [ 16.298575] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.307165] Suspending console(s) (use no_console_suspend to debug) [ 16.491120] Disabling non-boot CPUs ... [ 16.668499] Entering suspend state LP1 [ 16.668525] Enabling non-boot CPUs ... [ 16.669337] CPU1 is up [ 16.670006] CPU2 is up [ 16.670718] CPU3 is up [ 16.711759] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.723874] mmc1: Switching to 3.3V signalling voltage failed [ 16.938329] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.251222] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.251389] panel-simple panel: panel supply power not found, using dummy regulator [ 17.301618] OOM killer enabled. [ 17.304747] Restarting tasks ... done. [ 17.308994] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 18.387909] PM: suspend entry (deep) [ 18.391478] PM: Syncing filesystems ... done. [ 18.397164] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.405345] OOM killer disabled. [ 18.408581] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.417171] Suspending console(s) (use no_console_suspend to debug) [ 18.601114] Disabling non-boot CPUs ... [ 18.668003] IRQ17 no longer affine to CPU1 [ 18.788469] Entering suspend state LP1 [ 18.788495] Enabling non-boot CPUs ... [ 18.789306] CPU1 is up [ 18.789962] CPU2 is up [ 18.790681] CPU3 is up [ 18.831714] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.843667] mmc1: Switching to 3.3V signalling voltage failed [ 19.373451] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.373618] panel-simple panel: panel supply power not found, using dummy regulator [ 19.421079] OOM killer enabled. [ 19.424208] Restarting tasks ... done. [ 19.428480] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 20.507770] PM: suspend entry (deep) [ 20.511370] PM: Syncing filesystems ... done. [ 20.517040] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.525223] OOM killer disabled. [ 20.528458] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.537049] Suspending console(s) (use no_console_suspend to debug) [ 20.721072] Disabling non-boot CPUs ... [ 20.888449] Entering suspend state LP1 [ 20.888475] Enabling non-boot CPUs ... [ 20.889290] CPU1 is up [ 20.889962] CPU2 is up [ 20.890679] CPU3 is up [ 20.931874] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.944077] mmc1: Switching to 3.3V signalling voltage failed [ 21.158258] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.472530] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.472697] panel-simple panel: panel supply power not found, using dummy regulator [ 21.522925] OOM killer enabled. [ 21.526054] Restarting tasks ... done. [ 21.530351] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 22.607851] PM: suspend entry (deep) [ 22.611418] PM: Syncing filesystems ... done. [ 22.616943] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.625125] OOM killer disabled. [ 22.628360] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.636949] Suspending console(s) (use no_console_suspend to debug) [ 22.821005] Disabling non-boot CPUs ... [ 22.997904] IRQ17 no longer affine to CPU3 [ 22.998430] Entering suspend state LP1 [ 22.998455] Enabling non-boot CPUs ... [ 22.999268] CPU1 is up [ 22.999946] CPU2 is up [ 23.000662] CPU3 is up [ 23.041691] cros-ec-spi spi0.0: spi transfer failed: -121 [ 23.053856] mmc1: Switching to 3.3V signalling voltage failed [ 23.583405] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.583572] panel-simple panel: panel supply power not found, using dummy regulator [ 23.631034] OOM killer enabled. [ 23.634163] Restarting tasks ... done. [ 23.638441] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:19 1970 [ 24.717834] PM: suspend entry (deep) [ 24.721402] PM: Syncing filesystems ... done. [ 24.727157] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.735339] OOM killer disabled. [ 24.738575] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.747163] Suspending console(s) (use no_console_suspend to debug) [ 24.931136] Disabling non-boot CPUs ... [ 25.088468] Entering suspend state LP1 [ 25.088494] Enabling non-boot CPUs ... [ 25.089309] CPU1 is up [ 25.089982] CPU2 is up [ 25.090699] CPU3 is up [ 25.132087] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.144042] mmc1: Switching to 3.3V signalling voltage failed [ 25.358232] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 25.671693] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.671860] panel-simple panel: panel supply power not found, using dummy regulator [ 25.722176] OOM killer enabled. [ 25.725317] Restarting tasks ... done. [ 25.729770] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE