U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.9 MiB/s done Bytes transferred = 6360056 (610bf8 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x610bf8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171221-222604-g0e08c46 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Dec 20 21:04:12 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 780K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 781 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007470] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016997] Switching to timer-based delay loop, resolution 1000ns [ 0.024168] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029222] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039968] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047936] Switching to timer-based delay loop, resolution 83ns [ 0.054404] Console: colour dummy device 80x30 [ 0.058352] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068660] pid_max: default: 32768 minimum: 301 [ 0.073745] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079846] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087692] CPU: Testing write buffer coherency: ok [ 0.092018] /cpus/cpu@0 missing clock-frequency property [ 0.097019] /cpus/cpu@1 missing clock-frequency property [ 0.102328] /cpus/cpu@2 missing clock-frequency property [ 0.107593] /cpus/cpu@3 missing clock-frequency property [ 0.112865] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152983] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157737] Hierarchical SRCU implementation. [ 0.173507] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193003] smp: Bringing up secondary CPUs ... [ 0.243631] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323746] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403862] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413438] smp: Brought up 1 node, 4 CPUs [ 0.432526] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438694] CPU: All CPU(s) started in SVC mode. [ 0.445128] devtmpfs: initialized [ 0.466601] Built 1 zonelists, mobility grouping on. Total pages: 515751 [ 0.471864] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488922] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.495313] pinctrl core: initialized pinctrl subsystem [ 0.501461] NET: Registered protocol family 16 [ 0.505918] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512982] cpuidle: using governor menu [ 0.538752] No ATAGs? [ 0.538888] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.547249] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.555004] iommu: Adding device 50000000.host1x to group 0 [ 0.558772] iommu: Adding device 54200000.dc to group 1 [ 0.563916] iommu: Adding device 54240000.dc to group 1 [ 0.569157] iommu: Adding device 57000000.gpu to group 2 [ 0.591678] +5V_SYS: supplied by +VDD_MUX [ 0.594170] +3.3V_SYS: supplied by +VDD_MUX [ 0.598736] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.604046] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.612172] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.617896] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.626133] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.632925] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.641119] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.646935] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.655160] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.660709] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.668935] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.674579] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.684022] vgaarb: loaded [ 0.686185] SCSI subsystem initialized [ 0.689355] libata version 3.00 loaded. [ 0.693259] usbcore: registered new interface driver usbfs [ 0.698479] usbcore: registered new interface driver hub [ 0.703770] usbcore: registered new device driver usb [ 0.711958] Linux video capture interface: v2.00 [ 0.714737] pps_core: LinuxPPS API ver. 1 registered [ 0.719626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.728742] PTP clock support registered [ 0.734065] Advanced Linux Sound Architecture Driver Initialized. [ 0.739332] Bluetooth: Core ver 2.22 [ 0.742275] NET: Registered protocol family 31 [ 0.746671] Bluetooth: HCI device and connection manager initialized [ 0.752976] Bluetooth: HCI socket layer initialized [ 0.757855] Bluetooth: L2CAP socket layer initialized [ 0.762884] Bluetooth: SCO socket layer initialized [ 0.768359] clocksource: Switched to clocksource arch_sys_counter [ 0.864941] NET: Registered protocol family 2 [ 0.868417] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.875078] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.882150] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.888648] TCP: Hash tables configured (established 8192 bind 8192) [ 0.895262] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.900732] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.907319] NET: Registered protocol family 1 [ 0.912076] RPC: Registered named UNIX socket transport module. [ 0.917221] RPC: Registered udp transport module. [ 0.921929] RPC: Registered tcp transport module. [ 0.926581] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.933628] PCI: CLS 0 bytes, default 64 [ 0.938769] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.946812] Initialise system trusted keyrings [ 0.949665] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.957248] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.962492] NFS: Registering the id_resolver key type [ 0.966734] Key type id_resolver registered [ 0.970925] Key type id_legacy registered [ 0.980070] Key type asymmetric registered [ 0.982257] Asymmetric key parser 'x509' registered [ 0.987243] bounce: pool size: 64 pages [ 0.991007] io scheduler noop registered (default) [ 0.995691] io scheduler mq-deadline registered [ 1.000216] io scheduler kyber registered [ 1.006028] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.011021] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.017948] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.034174] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.037877] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.047779] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.058538] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.065488] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.071095] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.078690] console [ttyS0] disabled [ 1.080400] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.089351] console [ttyS0] enabled [ 1.089351] console [ttyS0] enabled [ 1.095526] bootconsole [earlycon0] disabled [ 1.095526] bootconsole [earlycon0] disabled [ 1.104937] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.116334] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.145108] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.164933] loop: module loaded [ 1.169538] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.176951] as3722 4-0040: AS3722 with revision 0x1 found [ 1.189187] as3722-sd2: supplied by +5V_SYS [ 1.193860] as3722-sd3: supplied by +5V_SYS [ 1.198280] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.204681] as3722-sd4: supplied by +5V_SYS [ 1.209370] as3722-sd5: supplied by +5V_SYS [ 1.215460] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.221569] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.227807] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.233844] as3722-ldo3: supplied by +3.3V_SYS [ 1.238374] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.246179] as3722-ldo4: supplied by +3.3V_SYS [ 1.250873] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.257115] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.261984] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.268954] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.274607] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.280812] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.292209] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.310404] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.317283] libphy: Fixed MDIO Bus: probed [ 1.321426] CAN device driver interface [ 1.325311] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.332285] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.337994] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.345674] usbcore: registered new interface driver pegasus [ 1.351427] usbcore: registered new interface driver asix [ 1.356874] usbcore: registered new interface driver ax88179_178a [ 1.363038] usbcore: registered new interface driver cdc_ether [ 1.368947] usbcore: registered new interface driver smsc75xx [ 1.374756] usbcore: registered new interface driver smsc95xx [ 1.380569] usbcore: registered new interface driver net1080 [ 1.386272] usbcore: registered new interface driver cdc_subset [ 1.392253] usbcore: registered new interface driver zaurus [ 1.397886] usbcore: registered new interface driver cdc_ncm [ 1.403802] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.409448] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.415147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.421689] ehci-pci: EHCI PCI platform driver [ 1.426185] tegra-ehci: Tegra EHCI driver [ 1.433059] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.438500] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.446300] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.478390] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.485225] hub 1-0:1.0: USB hub found [ 1.489035] hub 1-0:1.0: 1 port detected [ 1.494199] usbcore: registered new interface driver cdc_acm [ 1.499872] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.507922] usbcore: registered new interface driver cdc_wdm [ 1.513677] usbcore: registered new interface driver usb-storage [ 1.527969] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.534863] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.542705] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.549906] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.556422] i2c /dev entries driver [ 1.561201] usbcore: registered new interface driver uvcvideo [ 1.566937] USB Video Class driver (1.1.1) [ 1.571049] gspca_main: v2.14.0 registered [ 1.575783] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.586108] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.595024] sdhci: Secure Digital Host Controller Interface driver [ 1.601348] sdhci: Copyright(c) Pierre Ossman [ 1.605699] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.611696] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.616584] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.637871] mmc0: Unknown controller version (3). You may experience problems. [ 1.645151] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.682280] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.690665] usbcore: registered new interface driver usbhid [ 1.696271] usbhid: USB HID core driver [ 1.740258] mmc0: new high speed MMC card at address 0001 [ 1.750956] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.760664] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.771696] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.777846] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.786975] mmcblk0: p1 [ 2.139740] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.160039] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.170884] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.182131] NET: Registered protocol family 10 [ 2.188001] Segment Routing with IPv6 [ 2.191938] mip6: Mobile IPv6 [ 2.194905] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.202354] NET: Registered protocol family 17 [ 2.206811] NET: Registered protocol family 15 [ 2.211311] can: controller area network core (rev 20170425 abi 9) [ 2.217716] NET: Registered protocol family 29 [ 2.222176] can: raw protocol (rev 20170425) [ 2.226441] can: broadcast manager protocol (rev 20170425 t) [ 2.232117] can: netlink gateway (rev 20170425) max_hops=1 [ 2.237783] Bluetooth: RFCOMM socket layer initialized [ 2.242998] Bluetooth: RFCOMM ver 1.11 [ 2.246767] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.252094] Bluetooth: BNEP socket layer initialized [ 2.257052] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.262985] Bluetooth: HIDP socket layer initialized [ 2.268166] Key type dns_resolver registered [ 2.273002] Registering SWP/SWPB emulation handler [ 2.278614] Loading compiled-in X.509 certificates [ 2.303195] +3.3V_RUN: supplied by +3.3V_SYS [ 2.308113] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.313012] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.319080] +5V_USB_HS: supplied by +5V_SYS [ 2.324173] +3.3V_LP0: supplied by +3.3V_SYS [ 2.329678] +5V_HDMI_CON: supplied by +5V_SYS [ 2.334467] +5V_SATA: supplied by +5V_SYS [ 2.338933] +12V_SATA: supplied by +VDD_MUX [ 2.344521] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.351364] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.358411] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.365887] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.371523] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.380644] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.389978] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.398324] as3722-sd2: supplied by +5V_SYS [ 2.402864] as3722-sd3: supplied by +5V_SYS [ 2.407354] as3722-sd4: supplied by +5V_SYS [ 2.412044] as3722-sd5: supplied by +5V_SYS [ 2.417729] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.423574] as3722-ldo1: supplied by +3.3V_RUN [ 2.428320] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.434202] as3722-ldo3: supplied by +3.3V_SYS [ 2.439591] as3722-ldo4: supplied by +3.3V_SYS [ 2.444335] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.450222] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.458873] as3722-ldo6: supplied by +3.3V_RUN [ 2.463868] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.469291] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.476369] as3722-ldo9: supplied by +5V_SYS [ 2.481870] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.488647] as3722-ldo10: supplied by +5V_SYS [ 2.493755] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.500622] as3722-ldo11: supplied by +3.3V_RUN [ 2.505900] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.515176] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.524254] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.534768] scsi host0: tegra-ahci [ 2.538925] scsi host1: tegra-ahci [ 2.542575] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.550591] ata2: DUMMY [ 2.554304] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.559787] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.567619] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.598491] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.605618] hub 2-0:1.0: USB hub found [ 2.609489] hub 2-0:1.0: 1 port detected [ 2.689162] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.696588] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.702033] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 2.712149] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.720833] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 2.728209] hub 3-0:1.0: USB hub found [ 2.732085] hub 3-0:1.0: 6 ports detected [ 2.736984] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.742451] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 2.750209] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.759572] hub 4-0:1.0: USB hub found [ 2.763369] hub 4-0:1.0: 2 ports detected [ 2.769494] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.774421] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.787716] mmc1: Unknown controller version (3). You may experience problems. [ 2.795074] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.831649] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.839432] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.847244] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.855091] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.879907] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.881947] ata1: SATA link down (SStatus 0 SControl 300) [ 2.893780] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.907768] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.914075] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.920328] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.927308] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.934693] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.940245] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.946259] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.955967] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.965781] pci 0000:00:01.0: enabling Extended Tags [ 2.970810] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.980586] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.990420] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.997144] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.007257] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.013290] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.022987] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.032729] pci 0000:00:02.0: enabling Extended Tags [ 3.037734] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.047507] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.057322] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.064004] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.074054] PCI: bus0: Fast back to back transfers disabled [ 3.079646] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.087689] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.095967] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.102093] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.109246] PCI: bus1: Fast back to back transfers disabled [ 3.114877] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.121779] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.127867] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.133562] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.140443] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.147921] PCI: bus2: Fast back to back transfers disabled [ 3.153578] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.160309] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.167284] mmc1: new high speed SDHC card at address aaaa [ 3.172626] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.183441] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.190520] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.198441] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.204793] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.212396] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.217605] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.224562] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.232490] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.239978] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.246254] mmcblk1: p1 p2 p3 [ 3.249516] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.254691] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.261060] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.268957] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.276731] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.283928] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.290413] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.296376] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.303557] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.310061] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.316198] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.321886] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.327776] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.360147] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x4508b650, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.369736] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.381919] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.391243] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.397870] [drm] No driver support for vblank timestamp query. [ 3.537733] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.701930] Console: switching to colour frame buffer device 512x135 [ 3.797910] drm drm: fb0: frame buffer device [ 3.802568] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.810045] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.817369] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.826400] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.833826] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:38 UTC (946684958) [ 3.842584] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.852292] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.858987] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.867583] cfg80211: failed to load regulatory.db [ 3.872642] +USB0_VBUS_SW: disabling [ 3.872654] +1.8V_RUN_CAM: disabling [ 3.876277] +2.8V_RUN_CAM: disabling [ 3.879925] +1.2V_RUN_CAM_FRONT: disabling [ 3.883518] +1.05V_RUN_CAM_REAR: disabling [ 3.887621] +3.3V_RUN_TOUCH: disabling [ 3.891795] +2.8V_RUN_CAM_AF: disabling [ 3.895621] +1.8V_RUN_VPP_FUSE: disabling [ 3.899536] ALSA device list: [ 3.899539] #0: tegra-hda at 0x70038000 irq 346 [ 3.899540] #1: NVIDIA Tegra Jetson TK1 [ 3.915941] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.968195] EXT4-fs (mmcblk0p1): recovery complete [ 3.973836] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.982052] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.992916] devtmpfs: mounted [ 3.996266] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#