U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.6 MiB/s done Bytes transferred = 6357856 (610360 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x610360 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171220-222321-g7dc9f64 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 19 21:04:01 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008019] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017551] Switching to timer-based delay loop, resolution 1000ns [ 0.024072] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029772] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040519] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048490] Switching to timer-based delay loop, resolution 83ns [ 0.054673] Console: colour dummy device 80x30 [ 0.058898] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069208] pid_max: default: 32768 minimum: 301 [ 0.073978] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080390] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087730] CPU: Testing write buffer coherency: ok [ 0.092401] /cpus/cpu@0 missing clock-frequency property [ 0.097553] /cpus/cpu@1 missing clock-frequency property [ 0.102849] /cpus/cpu@2 missing clock-frequency property [ 0.108127] /cpus/cpu@3 missing clock-frequency property [ 0.113409] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153452] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158108] Hierarchical SRCU implementation. [ 0.173667] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193457] smp: Bringing up secondary CPUs ... [ 0.243758] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323789] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403827] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413605] smp: Brought up 1 node, 4 CPUs [ 0.432683] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438841] CPU: All CPU(s) started in SVC mode. [ 0.444128] devtmpfs: initialized [ 0.453473] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458517] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475762] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482051] pinctrl core: initialized pinctrl subsystem [ 0.487579] NET: Registered protocol family 16 [ 0.491978] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498887] cpuidle: using governor menu [ 0.509979] No ATAGs? [ 0.510040] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518382] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525057] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532744] iommu: Adding device 50000000.host1x to group 0 [ 0.538156] iommu: Adding device 54200000.dc to group 1 [ 0.543355] iommu: Adding device 54240000.dc to group 1 [ 0.548557] iommu: Adding device 57000000.gpu to group 2 [ 0.559569] +5V_SYS: supplied by +VDD_MUX [ 0.561795] +3.3V_SYS: supplied by +VDD_MUX [ 0.566116] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571456] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579558] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585495] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593608] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599362] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607489] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613229] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621399] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628222] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636420] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642262] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650851] vgaarb: loaded [ 0.653364] SCSI subsystem initialized [ 0.656915] libata version 3.00 loaded. [ 0.660769] usbcore: registered new interface driver usbfs [ 0.666117] usbcore: registered new interface driver hub [ 0.671427] usbcore: registered new device driver usb [ 0.677643] Linux video capture interface: v2.00 [ 0.681026] pps_core: LinuxPPS API ver. 1 registered [ 0.685950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695053] PTP clock support registered [ 0.699091] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706314] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712482] Advanced Linux Sound Architecture Driver Initialized. [ 0.718688] Bluetooth: Core ver 2.22 [ 0.722012] NET: Registered protocol family 31 [ 0.726421] Bluetooth: HCI device and connection manager initialized [ 0.732744] Bluetooth: HCI socket layer initialized [ 0.737603] Bluetooth: L2CAP socket layer initialized [ 0.742638] Bluetooth: SCO socket layer initialized [ 0.747735] clocksource: Switched to clocksource arch_sys_counter [ 0.784848] NET: Registered protocol family 2 [ 0.787656] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.794960] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.801974] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.808414] TCP: Hash tables configured (established 8192 bind 8192) [ 0.814853] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.820592] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.827017] NET: Registered protocol family 1 [ 0.831530] RPC: Registered named UNIX socket transport module. [ 0.837122] RPC: Registered udp transport module. [ 0.841811] RPC: Registered tcp transport module. [ 0.846480] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853142] PCI: CLS 0 bytes, default 64 [ 0.857491] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.865606] Initialise system trusted keyrings [ 0.869447] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.876254] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.881870] NFS: Registering the id_resolver key type [ 0.886615] Key type id_resolver registered [ 0.890789] Key type id_legacy registered [ 0.896546] Key type asymmetric registered [ 0.898838] Asymmetric key parser 'x509' registered [ 0.903734] bounce: pool size: 64 pages [ 0.907515] io scheduler noop registered (default) [ 0.912268] io scheduler mq-deadline registered [ 0.916768] io scheduler kyber registered [ 0.921406] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.933846] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.939940] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.948738] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.955498] console [ttyS0] disabled [ 0.958414] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.967329] console [ttyS0] enabled [ 0.967329] console [ttyS0] enabled [ 0.973562] bootconsole [earlycon0] disabled [ 0.973562] bootconsole [earlycon0] disabled [ 0.999677] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.006146] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.013653] panel-simple panel: panel supply power not found, using dummy regulator [ 1.024948] loop: module loaded [ 1.028669] as3722 4-0040: AS3722 with revision 0x1 found [ 1.038711] as3722-sd2: supplied by +5V_SYS [ 1.043137] as3722-sd3: supplied by +5V_SYS [ 1.047473] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.053658] as3722-sd4: supplied by +5V_SYS [ 1.058007] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.063751] as3722-sd5: supplied by +5V_SYS [ 1.069367] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.075110] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.081139] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.086765] as3722-ldo3: supplied by +3.3V_SYS [ 1.091224] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.098803] as3722-ldo4: supplied by +3.3V_SYS [ 1.103402] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.109433] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.114208] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.120904] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.126934] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.131716] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.138275] as3722-ldo9: supplied by +5V_SYS [ 1.142844] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.149054] as3722-ldo10: supplied by +5V_SYS [ 1.153565] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.160016] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.182444] cros-ec-spi spi0.0: Chrome EC device registered [ 1.197306] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.212887] libphy: Fixed MDIO Bus: probed [ 1.216971] CAN device driver interface [ 1.220822] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.227771] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233378] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240814] usbcore: registered new interface driver pegasus [ 1.246484] usbcore: registered new interface driver asix [ 1.251892] usbcore: registered new interface driver ax88179_178a [ 1.257994] usbcore: registered new interface driver cdc_ether [ 1.263834] usbcore: registered new interface driver smsc75xx [ 1.269594] usbcore: registered new interface driver smsc95xx [ 1.275341] usbcore: registered new interface driver net1080 [ 1.281009] usbcore: registered new interface driver cdc_subset [ 1.286929] usbcore: registered new interface driver zaurus [ 1.292519] usbcore: registered new interface driver cdc_ncm [ 1.298265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304775] ehci-pci: EHCI PCI platform driver [ 1.309232] tegra-ehci: Tegra EHCI driver [ 1.313491] usbcore: registered new interface driver cdc_acm [ 1.319143] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.327146] usbcore: registered new interface driver cdc_wdm [ 1.332821] usbcore: registered new interface driver usb-storage [ 1.339484] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.359283] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.366141] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.372899] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.380047] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.386325] i2c /dev entries driver [ 1.390226] usbcore: registered new interface driver uvcvideo [ 1.395957] USB Video Class driver (1.1.1) [ 1.400048] gspca_main: v2.14.0 registered [ 1.404366] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.413026] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.421368] sdhci: Secure Digital Host Controller Interface driver [ 1.427532] sdhci: Copyright(c) Pierre Ossman [ 1.431886] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.437654] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.451450] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.456321] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.475865] mmc0: Unknown controller version (3). You may experience problems. [ 1.483106] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.519886] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.527595] usbcore: registered new interface driver usbhid [ 1.533277] usbhid: USB HID core driver [ 1.539377] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.587639] mmc0: new high speed MMC card at address 0001 [ 1.593560] max98090 0-0010: MAX98090 REVID=0x43 [ 1.594979] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.596835] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.598753] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.602765] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.611759] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.629440] max98090 0-0010: use default 2.8v micbias [ 1.636879] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.644385] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.652323] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.660628] NET: Registered protocol family 10 [ 1.665579] Segment Routing with IPv6 [ 1.669306] mip6: Mobile IPv6 [ 1.672265] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.678714] NET: Registered protocol family 17 [ 1.683152] NET: Registered protocol family 15 [ 1.687584] can: controller area network core (rev 20170425 abi 9) [ 1.693829] NET: Registered protocol family 29 [ 1.698268] can: raw protocol (rev 20170425) [ 1.702525] can: broadcast manager protocol (rev 20170425 t) [ 1.708181] can: netlink gateway (rev 20170425) max_hops=1 [ 1.713721] Bluetooth: RFCOMM socket layer initialized [ 1.718866] Bluetooth: RFCOMM ver 1.11 [ 1.722607] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.727913] Bluetooth: BNEP socket layer initialized [ 1.732863] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.738773] Bluetooth: HIDP socket layer initialized [ 1.743813] Key type dns_resolver registered [ 1.748267] Registering SWP/SWPB emulation handler [ 1.753307] Loading compiled-in X.509 certificates [ 1.764405] +3.3V_RUN: supplied by +3.3V_SYS [ 1.769403] +VDD_LED: supplied by +VDD_MUX [ 1.773598] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.779267] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.783961] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.788720] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.793954] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.798590] +5V_USB_HS: supplied by +5V_SYS [ 1.802900] +5V_USB_SS: supplied by +5V_SYS [ 1.807887] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.813252] +3.3V_LP0: supplied by +3.3V_SYS [ 1.818234] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.824072] +5V_HDMI_CON: supplied by +5V_SYS [ 1.829048] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.835782] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.848870] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.855083] panel-simple panel: panel supply power not found, using dummy regulator [ 1.928454] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.935852] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.941262] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.950817] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.959451] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.965829] hub 1-0:1.0: USB hub found [ 1.969613] hub 1-0:1.0: 6 ports detected [ 1.974019] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.979452] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.987129] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.995604] hub 2-0:1.0: USB hub found [ 1.999418] hub 2-0:1.0: 2 ports detected [ 2.004445] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.017990] mmc1: Unknown controller version (3). You may experience problems. [ 2.025245] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.031718] mmc1: Switching to 3.3V signalling voltage failed [ 2.060494] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.068129] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.073000] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.083274] mmc2: Unknown controller version (3). You may experience problems. [ 2.090613] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.126211] mmc1: new high speed SDIO card at address 0001 [ 2.131998] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.139554] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.145712] panel-simple panel: panel supply power not found, using dummy regulator [ 2.153791] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.160575] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.166735] panel-simple panel: panel supply power not found, using dummy regulator [ 2.174397] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.174588] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.192538] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.199377] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.208044] cfg80211: failed to load regulatory.db [ 2.208401] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.208414] +1.8V_RUN_CAM: disabling [ 2.212945] +1.2V_RUN_CAM_FRONT: disabling [ 2.217555] +1.05V_RUN_CAM_REAR: disabling [ 2.221228] +2.8V_RUN_TOUCH: disabling [ 2.225409] +2.8V_RUN_CAM_AF: disabling [ 2.229632] +1.8V_RUN_VPP_FUSE: disabling [ 2.233460] +VDD_LED: disabling [ 2.233463] +5V_VDD_TS_SW: disabling [ 2.233469] +3.3V_PANEL: disabling [ 2.233473] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.233476] +5V_HDMI_CON: disabling [ 2.233479] ALSA device list: [ 2.233482] #1: GoogleNyanBig [ 2.328276] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.336722] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.336927] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.337177] panel-simple panel: panel supply power not found, using dummy regulator [ 2.344908] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.376039] mmc2: new high speed SDHC card at address 0007 [ 2.383412] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.396452] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.402643] GPT:3014591 != 15564799 [ 2.406119] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.413548] GPT:3014591 != 15564799 [ 2.417025] GPT: Use GNU Parted to correct GPT errors. [ 2.422202] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.429194] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.435356] panel-simple panel: panel supply power not found, using dummy regulator [ 2.566627] EXT4-fs (mmcblk0p3): recovery complete [ 2.572160] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.580302] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.586919] devtmpfs: mounted [ 2.590351] Freeing unused kernel memory: 1024K [ 2.606450] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.611838] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.617160] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.622751] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.628513] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.633835] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.639918] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.645418] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.651081] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.656660] alloc_contig_range: [fbca1, fbca2) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.736546] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.751303] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.760815] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.766973] panel-simple panel: panel supply power not found, using dummy regulator [ 3.107824] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 3.777899] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.788867] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.795028] panel-simple panel: panel supply power not found, using dummy regulator [ 4.137828] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.326121] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.333037] scsi host0: usb-storage 1-1:1.0 [ 4.337648] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.343841] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.399402] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.408134] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.414354] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.578655] PM: suspend entry (deep) [ 5.582222] PM: Syncing filesystems ... done. [ 5.587802] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.595822] OOM killer disabled. [ 5.599047] Freezing remaining freezable tasks ... [ 5.604864] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.606250] (elapsed 0.007 seconds) done. [ 5.606255] Suspending console(s) (use no_console_suspend to debug) [ 5.628747] sd 0:0:0:0: [sda] Write Protect is off [ 5.628754] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.629858] sd 0:0:0:0: [sda] No Caching mode page found [ 5.629863] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.651397] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.655747] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.841189] Disabling non-boot CPUs ... [ 5.877937] IRQ17 no longer affine to CPU1 [ 5.988479] Entering suspend state LP1 [ 5.988504] Enabling non-boot CPUs ... [ 5.989273] CPU1 is up [ 5.989921] CPU2 is up [ 5.990611] CPU3 is up [ 6.031573] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.043814] mmc1: Switching to 3.3V signalling voltage failed [ 6.571096] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.571266] panel-simple panel: panel supply power not found, using dummy regulator [ 6.653273] OOM killer enabled. [ 6.656402] Restarting tasks ... done. [ 6.661024] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.417568] PM: suspend entry (deep) [ 7.421157] PM: Syncing filesystems ... done. [ 7.426850] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.435018] OOM killer disabled. [ 7.438255] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.446829] Suspending console(s) (use no_console_suspend to debug) [ 7.630983] Disabling non-boot CPUs ... [ 7.677907] IRQ17 no longer affine to CPU1 [ 7.798454] Entering suspend state LP1 [ 7.798479] Enabling non-boot CPUs ... [ 7.799292] CPU1 is up [ 7.799952] CPU2 is up [ 7.800660] CPU3 is up [ 7.841812] cros-ec-spi spi0.0: spi transfer failed: -121 [ 7.854032] mmc1: Switching to 3.3V signalling voltage failed [ 8.068209] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.383243] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.383409] panel-simple panel: panel supply power not found, using dummy regulator [ 8.437862] OOM killer enabled. [ 8.440994] Restarting tasks ... done. [ 8.445217] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.235701] PM: suspend entry (deep) [ 9.239365] PM: Syncing filesystems ... done. [ 9.244902] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.253070] OOM killer disabled. [ 9.256286] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.264886] Suspending console(s) (use no_console_suspend to debug) [ 9.451103] Disabling non-boot CPUs ... [ 9.617845] IRQ17 no longer affine to CPU3 [ 9.618356] Entering suspend state LP1 [ 9.618381] Enabling non-boot CPUs ... [ 9.619190] CPU1 is up [ 9.619851] CPU2 is up [ 9.620562] CPU3 is up [ 9.661900] cros-ec-spi spi0.0: spi transfer failed: -121 [ 9.674265] mmc1: Switching to 3.3V signalling voltage failed [ 9.888146] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 10.202019] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.202185] panel-simple panel: panel supply power not found, using dummy regulator [ 10.256494] OOM killer enabled. [ 10.259628] Restarting tasks ... done. [ 10.263849] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.057187] PM: suspend entry (deep) [ 11.060776] PM: Syncing filesystems ... done. [ 11.066304] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.074385] OOM killer disabled. [ 11.077600] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.086175] Suspending console(s) (use no_console_suspend to debug) [ 11.270966] Disabling non-boot CPUs ... [ 11.437820] IRQ17 no longer affine to CPU3 [ 11.438341] Entering suspend state LP1 [ 11.438366] Enabling non-boot CPUs ... [ 11.439179] CPU1 is up [ 11.439825] CPU2 is up [ 11.440533] CPU3 is up [ 11.481680] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.493723] mmc1: Switching to 3.3V signalling voltage failed [ 11.708155] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.021025] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.021194] panel-simple panel: panel supply power not found, using dummy regulator [ 12.075506] OOM killer enabled. [ 12.078642] Restarting tasks ... done. [ 12.082918] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 12.877426] PM: suspend entry (deep) [ 12.881016] PM: Syncing filesystems ... done. [ 12.886717] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.894802] OOM killer disabled. [ 12.898033] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.906604] Suspending console(s) (use no_console_suspend to debug) [ 13.091074] Disabling non-boot CPUs ... [ 13.278408] Entering suspend state LP1 [ 13.278433] Enabling non-boot CPUs ... [ 13.279246] CPU1 is up [ 13.279910] CPU2 is up [ 13.280624] CPU3 is up [ 13.322013] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.334178] mmc1: Switching to 3.3V signalling voltage failed [ 13.548131] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.862636] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.862805] panel-simple panel: panel supply power not found, using dummy regulator [ 13.913134] OOM killer enabled. [ 13.916274] Restarting tasks ... done. [ 13.920735] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 14.716378] PM: suspend entry (deep) [ 14.719965] PM: Syncing filesystems ... done. [ 14.725494] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.733665] OOM killer disabled. [ 14.736881] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.745475] Suspending console(s) (use no_console_suspend to debug) [ 14.931579] Disabling non-boot CPUs ... [ 15.098274] Entering suspend state LP1 [ 15.098298] Enabling non-boot CPUs ... [ 15.099109] CPU1 is up [ 15.099780] CPU2 is up [ 15.100489] CPU3 is up [ 15.141957] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.153973] mmc1: Switching to 3.3V signalling voltage failed [ 15.683277] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.683446] panel-simple panel: panel supply power not found, using dummy regulator [ 15.726885] OOM killer enabled. [ 15.730045] Restarting tasks ... done. [ 15.734601] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 16.536937] PM: suspend entry (deep) [ 16.540525] PM: Syncing filesystems ... done. [ 16.546150] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.554328] OOM killer disabled. [ 16.557544] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.566127] Suspending console(s) (use no_console_suspend to debug) [ 16.751108] Disabling non-boot CPUs ... [ 16.807792] IRQ17 no longer affine to CPU1 [ 16.928339] Entering suspend state LP1 [ 16.928364] Enabling non-boot CPUs ... [ 16.929177] CPU1 is up [ 16.929841] CPU2 is up [ 16.930556] CPU3 is up [ 16.971969] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.983977] mmc1: Switching to 3.3V signalling voltage failed [ 17.198090] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.513646] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.513815] panel-simple panel: panel supply power not found, using dummy regulator [ 17.568131] OOM killer enabled. [ 17.571260] Restarting tasks ... done. [ 17.575844] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 18.367435] PM: suspend entry (deep) [ 18.371034] PM: Syncing filesystems ... done. [ 18.376716] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.384887] OOM killer disabled. [ 18.388125] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.396616] Suspending console(s) (use no_console_suspend to debug) [ 18.580812] Disabling non-boot CPUs ... [ 18.758225] Entering suspend state LP1 [ 18.758250] Enabling non-boot CPUs ... [ 18.759062] CPU1 is up [ 18.759712] CPU2 is up [ 18.760430] CPU3 is up [ 18.802100] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.814127] mmc1: Switching to 3.3V signalling voltage failed [ 19.343830] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.343998] panel-simple panel: panel supply power not found, using dummy regulator [ 19.387434] OOM killer enabled. [ 19.390593] Restarting tasks ... done. [ 19.395000] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 20.197083] PM: suspend entry (deep) [ 20.200715] PM: Syncing filesystems ... done. [ 20.206435] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.214600] OOM killer disabled. [ 20.217835] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.226327] Suspending console(s) (use no_console_suspend to debug) [ 20.410793] Disabling non-boot CPUs ... [ 20.608255] Entering suspend state LP1 [ 20.608280] Enabling non-boot CPUs ... [ 20.609093] CPU1 is up [ 20.609743] CPU2 is up [ 20.610463] CPU3 is up [ 20.651606] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.664130] mmc1: Switching to 3.3V signalling voltage failed [ 20.878004] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.192616] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.192783] panel-simple panel: panel supply power not found, using dummy regulator [ 21.243216] OOM killer enabled. [ 21.246352] Restarting tasks ... done. [ 21.250615] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 22.046092] PM: suspend entry (deep) [ 22.049677] PM: Syncing filesystems ... done. [ 22.055134] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.063219] OOM killer disabled. [ 22.066435] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.075010] Suspending console(s) (use no_console_suspend to debug) [ 22.261212] Disabling non-boot CPUs ... [ 22.428172] Entering suspend state LP1 [ 22.428197] Enabling non-boot CPUs ... [ 22.429009] CPU1 is up [ 22.429675] CPU2 is up [ 22.430396] CPU3 is up [ 22.471366] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.483546] mmc1: Switching to 3.3V signalling voltage failed [ 22.697945] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.013322] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.013489] panel-simple panel: panel supply power not found, using dummy regulator [ 23.063796] OOM killer enabled. [ 23.066937] Restarting tasks ... done. [ 23.071298] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE