U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.1 MiB/s done Bytes transferred = 6357856 (610360 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x610360 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171220-222321-g7dc9f64 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 19 21:04:01 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2836K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008016] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017547] Switching to timer-based delay loop, resolution 1000ns [ 0.024071] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029768] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040516] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048486] Switching to timer-based delay loop, resolution 83ns [ 0.054669] Console: colour dummy device 80x30 [ 0.058895] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069204] pid_max: default: 32768 minimum: 301 [ 0.073973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080386] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087723] CPU: Testing write buffer coherency: ok [ 0.092401] /cpus/cpu@0 missing clock-frequency property [ 0.097550] /cpus/cpu@1 missing clock-frequency property [ 0.102845] /cpus/cpu@2 missing clock-frequency property [ 0.108123] /cpus/cpu@3 missing clock-frequency property [ 0.113406] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153448] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158103] Hierarchical SRCU implementation. [ 0.173662] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193452] smp: Bringing up secondary CPUs ... [ 0.243752] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323779] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403822] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413598] smp: Brought up 1 node, 4 CPUs [ 0.432676] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438834] CPU: All CPU(s) started in SVC mode. [ 0.444123] devtmpfs: initialized [ 0.453471] Built 1 zonelists, mobility grouping on. Total pages: 516006 [ 0.458513] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.466133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.475761] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.482049] pinctrl core: initialized pinctrl subsystem [ 0.487573] NET: Registered protocol family 16 [ 0.491977] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.498888] cpuidle: using governor menu [ 0.509972] No ATAGs? [ 0.510032] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.518373] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.525050] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.532735] iommu: Adding device 50000000.host1x to group 0 [ 0.538148] iommu: Adding device 54200000.dc to group 1 [ 0.543348] iommu: Adding device 54240000.dc to group 1 [ 0.548549] iommu: Adding device 57000000.gpu to group 2 [ 0.559557] +5V_SYS: supplied by +VDD_MUX [ 0.561782] +3.3V_SYS: supplied by +VDD_MUX [ 0.566103] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.571443] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.579545] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.585482] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.593594] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.599349] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.607475] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.613216] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.621385] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.628209] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.636405] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.642249] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.650841] vgaarb: loaded [ 0.653350] SCSI subsystem initialized [ 0.656905] libata version 3.00 loaded. [ 0.660759] usbcore: registered new interface driver usbfs [ 0.666103] usbcore: registered new interface driver hub [ 0.671414] usbcore: registered new device driver usb [ 0.677625] Linux video capture interface: v2.00 [ 0.681012] pps_core: LinuxPPS API ver. 1 registered [ 0.685937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.695040] PTP clock support registered [ 0.699078] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.706300] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.712468] Advanced Linux Sound Architecture Driver Initialized. [ 0.718676] Bluetooth: Core ver 2.22 [ 0.721998] NET: Registered protocol family 31 [ 0.726408] Bluetooth: HCI device and connection manager initialized [ 0.732731] Bluetooth: HCI socket layer initialized [ 0.737588] Bluetooth: L2CAP socket layer initialized [ 0.742623] Bluetooth: SCO socket layer initialized [ 0.747720] clocksource: Switched to clocksource arch_sys_counter [ 0.784822] NET: Registered protocol family 2 [ 0.787632] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.794936] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.801948] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.808388] TCP: Hash tables configured (established 8192 bind 8192) [ 0.814823] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.820566] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.826987] NET: Registered protocol family 1 [ 0.831510] RPC: Registered named UNIX socket transport module. [ 0.837095] RPC: Registered udp transport module. [ 0.841786] RPC: Registered tcp transport module. [ 0.846455] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853118] PCI: CLS 0 bytes, default 64 [ 0.857458] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.865574] Initialise system trusted keyrings [ 0.869423] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.876240] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.881845] NFS: Registering the id_resolver key type [ 0.886587] Key type id_resolver registered [ 0.890764] Key type id_legacy registered [ 0.896505] Key type asymmetric registered [ 0.898811] Asymmetric key parser 'x509' registered [ 0.903707] bounce: pool size: 64 pages [ 0.907490] io scheduler noop registered (default) [ 0.912243] io scheduler mq-deadline registered [ 0.916742] io scheduler kyber registered [ 0.921370] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.933812] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.939901] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.948700] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.955463] console [ttyS0] disabled [ 0.958377] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.967295] console [ttyS0] enabled [ 0.967295] console [ttyS0] enabled [ 0.973529] bootconsole [earlycon0] disabled [ 0.973529] bootconsole [earlycon0] disabled [ 0.999636] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.006104] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.013610] panel-simple panel: panel supply power not found, using dummy regulator [ 1.024905] loop: module loaded [ 1.028623] as3722 4-0040: AS3722 with revision 0x1 found [ 1.038661] as3722-sd2: supplied by +5V_SYS [ 1.043086] as3722-sd3: supplied by +5V_SYS [ 1.047421] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.053607] as3722-sd4: supplied by +5V_SYS [ 1.057959] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.063700] as3722-sd5: supplied by +5V_SYS [ 1.069318] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.075060] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.081087] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.086716] as3722-ldo3: supplied by +3.3V_SYS [ 1.091176] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.098754] as3722-ldo4: supplied by +3.3V_SYS [ 1.103352] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.109382] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.114158] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.120853] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.126881] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.131664] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.138222] as3722-ldo9: supplied by +5V_SYS [ 1.142792] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.149002] as3722-ldo10: supplied by +5V_SYS [ 1.153515] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.159964] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.182337] cros-ec-spi spi0.0: Chrome EC device registered [ 1.197185] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.202720] libphy: Fixed MDIO Bus: probed [ 1.206805] CAN device driver interface [ 1.210658] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.217602] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.223214] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.230624] usbcore: registered new interface driver pegasus [ 1.236290] usbcore: registered new interface driver asix [ 1.241726] usbcore: registered new interface driver ax88179_178a [ 1.247829] usbcore: registered new interface driver cdc_ether [ 1.253670] usbcore: registered new interface driver smsc75xx [ 1.259431] usbcore: registered new interface driver smsc95xx [ 1.265177] usbcore: registered new interface driver net1080 [ 1.270845] usbcore: registered new interface driver cdc_subset [ 1.276765] usbcore: registered new interface driver zaurus [ 1.282359] usbcore: registered new interface driver cdc_ncm [ 1.288102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.294612] ehci-pci: EHCI PCI platform driver [ 1.299068] tegra-ehci: Tegra EHCI driver [ 1.303331] usbcore: registered new interface driver cdc_acm [ 1.308983] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.316986] usbcore: registered new interface driver cdc_wdm [ 1.322660] usbcore: registered new interface driver usb-storage [ 1.329319] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.348944] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.355802] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.362562] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.369710] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.375987] i2c /dev entries driver [ 1.379893] usbcore: registered new interface driver uvcvideo [ 1.385624] USB Video Class driver (1.1.1) [ 1.389717] gspca_main: v2.14.0 registered [ 1.394034] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.402689] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.411032] sdhci: Secure Digital Host Controller Interface driver [ 1.417197] sdhci: Copyright(c) Pierre Ossman [ 1.421551] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.427321] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.441121] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.445992] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.465852] mmc0: Unknown controller version (3). You may experience problems. [ 1.473094] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.509871] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.517583] usbcore: registered new interface driver usbhid [ 1.523263] usbhid: USB HID core driver [ 1.529364] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.577612] mmc0: new high speed MMC card at address 0001 [ 1.583535] max98090 0-0010: MAX98090 REVID=0x43 [ 1.584968] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.586837] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.588741] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.592789] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.601771] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.619469] max98090 0-0010: use default 2.8v micbias [ 1.626907] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.634419] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.642359] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.650577] NET: Registered protocol family 10 [ 1.655528] Segment Routing with IPv6 [ 1.659256] mip6: Mobile IPv6 [ 1.662215] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.668667] NET: Registered protocol family 17 [ 1.673106] NET: Registered protocol family 15 [ 1.677536] can: controller area network core (rev 20170425 abi 9) [ 1.683784] NET: Registered protocol family 29 [ 1.688221] can: raw protocol (rev 20170425) [ 1.692478] can: broadcast manager protocol (rev 20170425 t) [ 1.698134] can: netlink gateway (rev 20170425) max_hops=1 [ 1.703672] Bluetooth: RFCOMM socket layer initialized [ 1.708816] Bluetooth: RFCOMM ver 1.11 [ 1.712557] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.717862] Bluetooth: BNEP socket layer initialized [ 1.722813] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.728723] Bluetooth: HIDP socket layer initialized [ 1.733764] Key type dns_resolver registered [ 1.738219] Registering SWP/SWPB emulation handler [ 1.743261] Loading compiled-in X.509 certificates [ 1.754377] +3.3V_RUN: supplied by +3.3V_SYS [ 1.759375] +VDD_LED: supplied by +VDD_MUX [ 1.763568] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.769239] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.773934] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.778691] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.783924] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.788556] +5V_USB_HS: supplied by +5V_SYS [ 1.792869] +5V_USB_SS: supplied by +5V_SYS [ 1.798017] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.803384] +3.3V_LP0: supplied by +3.3V_SYS [ 1.808440] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.814266] +5V_HDMI_CON: supplied by +5V_SYS [ 1.819245] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.825979] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.839157] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.845370] panel-simple panel: panel supply power not found, using dummy regulator [ 1.918452] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.925849] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.931286] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.940809] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.949436] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.955815] hub 1-0:1.0: USB hub found [ 1.959641] hub 1-0:1.0: 6 ports detected [ 1.964017] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.969420] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.977084] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.985574] hub 2-0:1.0: USB hub found [ 1.989385] hub 2-0:1.0: 2 ports detected [ 1.994422] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.007945] mmc1: Unknown controller version (3). You may experience problems. [ 2.015186] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.021678] mmc1: Switching to 3.3V signalling voltage failed [ 2.050455] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.058091] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.062964] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.073201] mmc2: Unknown controller version (3). You may experience problems. [ 2.080537] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.116104] mmc1: new high speed SDIO card at address 0001 [ 2.121902] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.129458] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.135615] panel-simple panel: panel supply power not found, using dummy regulator [ 2.143704] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.150482] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.156700] panel-simple panel: panel supply power not found, using dummy regulator [ 2.164621] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.173397] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.185161] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.191855] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.192911] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.192923] +1.8V_RUN_CAM: disabling [ 2.193066] +1.2V_RUN_CAM_FRONT: disabling [ 2.193192] +1.05V_RUN_CAM_REAR: disabling [ 2.193314] +2.8V_RUN_TOUCH: disabling [ 2.193439] +2.8V_RUN_CAM_AF: disabling [ 2.193560] +1.8V_RUN_VPP_FUSE: disabling [ 2.193685] +VDD_LED: disabling [ 2.193688] +5V_VDD_TS_SW: disabling [ 2.193694] +3.3V_PANEL: disabling [ 2.193697] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.193700] +5V_HDMI_CON: disabling [ 2.193702] ALSA device list: [ 2.193704] #1: GoogleNyanBig [ 2.252629] cfg80211: failed to load regulatory.db [ 2.308258] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.314309] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.322642] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.331501] panel-simple panel: panel supply power not found, using dummy regulator [ 2.337744] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.355248] mmc2: new high speed SDHC card at address 0007 [ 2.362607] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.375195] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.381422] GPT:3014591 != 15564799 [ 2.384901] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.392309] GPT:3014591 != 15564799 [ 2.395787] GPT: Use GNU Parted to correct GPT errors. [ 2.400988] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.408029] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.414206] panel-simple panel: panel supply power not found, using dummy regulator [ 2.515311] EXT4-fs (mmcblk0p3): recovery complete [ 2.520167] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.528359] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.535399] devtmpfs: mounted [ 2.538833] Freeing unused kernel memory: 1024K [ 2.598776] alloc_contig_range: [fbc77, fbc78) PFNs busy [ 2.604133] alloc_contig_range: [fbc78, fbc79) PFNs busy [ 2.610009] alloc_contig_range: [fbc79, fbc7a) PFNs busy [ 2.615840] alloc_contig_range: [fbc7a, fbc7b) PFNs busy [ 2.621710] alloc_contig_range: [fbc7b, fbc7c) PFNs busy [ 2.627102] alloc_contig_range: [fbc7c, fbc7d) PFNs busy [ 2.632637] alloc_contig_range: [fbc7d, fbc7e) PFNs busy [ 2.638397] alloc_contig_range: [fbc7e, fbc7f) PFNs busy [ 2.643885] alloc_contig_range: [fbc7f, fbc80) PFNs busy [ 2.649511] alloc_contig_range: [fbca1, fbca2) PFNs busy bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.729324] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.744049] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.753537] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.759785] panel-simple panel: panel supply power not found, using dummy regulator [ 3.097812] usb 1-3: new high-speed USB device number 3 using tegra-xusb