U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### 3.7 MiB/s done Bytes transferred = 6354848 (60f7a0 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.3 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x60f7a0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-next-20171219-222029-ga5791b1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 19 01:48:04 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 778K rwdata, 2832K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007454] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016984] Switching to timer-based delay loop, resolution 1000ns [ 0.024161] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029207] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039954] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047922] Switching to timer-based delay loop, resolution 83ns [ 0.054392] Console: colour dummy device 80x30 [ 0.058338] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068647] pid_max: default: 32768 minimum: 301 [ 0.073729] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079833] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087663] CPU: Testing write buffer coherency: ok [ 0.092001] /cpus/cpu@0 missing clock-frequency property [ 0.097006] /cpus/cpu@1 missing clock-frequency property [ 0.102314] /cpus/cpu@2 missing clock-frequency property [ 0.107579] /cpus/cpu@3 missing clock-frequency property [ 0.112852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152970] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157724] Hierarchical SRCU implementation. [ 0.173498] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.192994] smp: Bringing up secondary CPUs ... [ 0.243624] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323740] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403859] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413437] smp: Brought up 1 node, 4 CPUs [ 0.432524] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438693] CPU: All CPU(s) started in SVC mode. [ 0.445135] devtmpfs: initialized [ 0.465901] Built 1 zonelists, mobility grouping on. Total pages: 515751 [ 0.471171] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.478758] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488225] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.494613] pinctrl core: initialized pinctrl subsystem [ 0.500742] NET: Registered protocol family 16 [ 0.505220] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512258] cpuidle: using governor menu [ 0.537710] No ATAGs? [ 0.537845] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.546205] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.553960] iommu: Adding device 50000000.host1x to group 0 [ 0.557723] iommu: Adding device 54200000.dc to group 1 [ 0.562870] iommu: Adding device 54240000.dc to group 1 [ 0.568110] iommu: Adding device 57000000.gpu to group 2 [ 0.590471] +5V_SYS: supplied by +VDD_MUX [ 0.592962] +3.3V_SYS: supplied by +VDD_MUX [ 0.597520] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.602838] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.610964] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.616695] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.624924] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.631720] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.639912] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.645727] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.653952] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.659503] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.667730] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.673368] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.682801] vgaarb: loaded [ 0.684962] SCSI subsystem initialized [ 0.688145] libata version 3.00 loaded. [ 0.692036] usbcore: registered new interface driver usbfs [ 0.697268] usbcore: registered new interface driver hub [ 0.702564] usbcore: registered new device driver usb [ 0.710752] Linux video capture interface: v2.00 [ 0.713531] pps_core: LinuxPPS API ver. 1 registered [ 0.718425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.727537] PTP clock support registered [ 0.732866] Advanced Linux Sound Architecture Driver Initialized. [ 0.738116] Bluetooth: Core ver 2.22 [ 0.741070] NET: Registered protocol family 31 [ 0.745467] Bluetooth: HCI device and connection manager initialized [ 0.751771] Bluetooth: HCI socket layer initialized [ 0.756649] Bluetooth: L2CAP socket layer initialized [ 0.761680] Bluetooth: SCO socket layer initialized [ 0.767146] clocksource: Switched to clocksource arch_sys_counter [ 0.863055] NET: Registered protocol family 2 [ 0.866472] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.873233] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.880266] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.886740] TCP: Hash tables configured (established 8192 bind 8192) [ 0.893390] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.898848] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.905432] NET: Registered protocol family 1 [ 0.910181] RPC: Registered named UNIX socket transport module. [ 0.915335] RPC: Registered udp transport module. [ 0.920044] RPC: Registered tcp transport module. [ 0.924695] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.931748] PCI: CLS 0 bytes, default 64 [ 0.936818] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.944925] Initialise system trusted keyrings [ 0.947780] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.955363] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.960602] NFS: Registering the id_resolver key type [ 0.964834] Key type id_resolver registered [ 0.969040] Key type id_legacy registered [ 0.978070] Key type asymmetric registered [ 0.980256] Asymmetric key parser 'x509' registered [ 0.985242] bounce: pool size: 64 pages [ 0.989002] io scheduler noop registered (default) [ 0.993690] io scheduler mq-deadline registered [ 0.998219] io scheduler kyber registered [ 1.004002] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.009013] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.015942] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.031874] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.035578] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.045453] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.056090] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.063080] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.068633] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.076168] console [ttyS0] disabled [ 1.077931] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.086831] console [ttyS0] enabled [ 1.086831] console [ttyS0] enabled [ 1.093414] bootconsole [earlycon0] disabled [ 1.093414] bootconsole [earlycon0] disabled [ 1.102434] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.113464] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.142255] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.161940] loop: module loaded [ 1.166495] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.173942] as3722 4-0040: AS3722 with revision 0x1 found [ 1.186192] as3722-sd2: supplied by +5V_SYS [ 1.190877] as3722-sd3: supplied by +5V_SYS [ 1.195299] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.201691] as3722-sd4: supplied by +5V_SYS [ 1.206363] as3722-sd5: supplied by +5V_SYS [ 1.212478] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.218588] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.224817] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.230856] as3722-ldo3: supplied by +3.3V_SYS [ 1.235362] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.243189] as3722-ldo4: supplied by +3.3V_SYS [ 1.247896] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.254130] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.259009] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.265962] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.271638] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.277840] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.289161] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.307301] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.314172] libphy: Fixed MDIO Bus: probed [ 1.318471] CAN device driver interface [ 1.322358] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.329374] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.335077] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.342552] usbcore: registered new interface driver pegasus [ 1.348309] usbcore: registered new interface driver asix [ 1.353754] usbcore: registered new interface driver ax88179_178a [ 1.359917] usbcore: registered new interface driver cdc_ether [ 1.365804] usbcore: registered new interface driver smsc75xx [ 1.371633] usbcore: registered new interface driver smsc95xx [ 1.377447] usbcore: registered new interface driver net1080 [ 1.383148] usbcore: registered new interface driver cdc_subset [ 1.389133] usbcore: registered new interface driver zaurus [ 1.394763] usbcore: registered new interface driver cdc_ncm [ 1.400681] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.406305] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.412028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.418571] ehci-pci: EHCI PCI platform driver [ 1.423068] tegra-ehci: Tegra EHCI driver [ 1.429943] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.435369] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.443188] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.477178] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.483989] hub 1-0:1.0: USB hub found [ 1.487799] hub 1-0:1.0: 1 port detected [ 1.492960] usbcore: registered new interface driver cdc_acm [ 1.498632] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.506682] usbcore: registered new interface driver cdc_wdm [ 1.512436] usbcore: registered new interface driver usb-storage [ 1.526709] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.533602] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.541416] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.548616] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.555131] i2c /dev entries driver [ 1.559899] usbcore: registered new interface driver uvcvideo [ 1.565636] USB Video Class driver (1.1.1) [ 1.569751] gspca_main: v2.14.0 registered [ 1.574476] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.584778] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.593679] sdhci: Secure Digital Host Controller Interface driver [ 1.600004] sdhci: Copyright(c) Pierre Ossman [ 1.604356] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.610361] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.615249] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.636536] mmc0: Unknown controller version (3). You may experience problems. [ 1.643815] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.680948] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.689344] usbcore: registered new interface driver usbhid [ 1.694951] usbhid: USB HID core driver [ 1.738900] mmc0: new high speed MMC card at address 0001 [ 1.749573] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.759257] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.770279] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.776430] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 1.785576] mmcblk0: p1 [ 2.138502] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.158797] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.169593] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.180823] NET: Registered protocol family 10 [ 2.186674] Segment Routing with IPv6 [ 2.190612] mip6: Mobile IPv6 [ 2.193578] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.201006] NET: Registered protocol family 17 [ 2.205460] NET: Registered protocol family 15 [ 2.209962] can: controller area network core (rev 20170425 abi 9) [ 2.216368] NET: Registered protocol family 29 [ 2.220828] can: raw protocol (rev 20170425) [ 2.225092] can: broadcast manager protocol (rev 20170425 t) [ 2.230767] can: netlink gateway (rev 20170425) max_hops=1 [ 2.236427] Bluetooth: RFCOMM socket layer initialized [ 2.241634] Bluetooth: RFCOMM ver 1.11 [ 2.245402] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.250732] Bluetooth: BNEP socket layer initialized [ 2.255688] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.261625] Bluetooth: HIDP socket layer initialized [ 2.266794] Key type dns_resolver registered [ 2.271623] Registering SWP/SWPB emulation handler [ 2.277224] Loading compiled-in X.509 certificates [ 2.299715] +3.3V_RUN: supplied by +3.3V_SYS [ 2.304640] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.309532] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.315489] +5V_USB_HS: supplied by +5V_SYS [ 2.320554] +3.3V_LP0: supplied by +3.3V_SYS [ 2.325797] +5V_HDMI_CON: supplied by +5V_SYS [ 2.330908] +5V_SATA: supplied by +5V_SYS [ 2.335365] +12V_SATA: supplied by +VDD_MUX [ 2.340979] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.347892] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.354924] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.362517] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.368153] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.377266] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.385956] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.394830] as3722-sd2: supplied by +5V_SYS [ 2.399365] as3722-sd3: supplied by +5V_SYS [ 2.403847] as3722-sd4: supplied by +5V_SYS [ 2.408533] as3722-sd5: supplied by +5V_SYS [ 2.414224] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.420186] as3722-ldo1: supplied by +3.3V_RUN [ 2.424928] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.430648] as3722-ldo3: supplied by +3.3V_SYS [ 2.436013] as3722-ldo4: supplied by +3.3V_SYS [ 2.440789] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.445711] as3722-ldo6: supplied by +3.3V_RUN [ 2.451436] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.460049] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.465597] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.472706] as3722-ldo9: supplied by +5V_SYS [ 2.478183] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.484915] as3722-ldo10: supplied by +5V_SYS [ 2.490059] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.496885] as3722-ldo11: supplied by +3.3V_RUN [ 2.502206] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.511475] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.520553] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.531034] scsi host0: tegra-ahci [ 2.535128] scsi host1: tegra-ahci [ 2.538819] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.546813] ata2: DUMMY [ 2.550620] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.556057] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.563934] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.597280] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.604385] hub 2-0:1.0: USB hub found [ 2.608256] hub 2-0:1.0: 1 port detected [ 2.677949] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.685375] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.690822] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 2.700962] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.709646] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 2.716754] hub 3-0:1.0: USB hub found [ 2.720640] hub 3-0:1.0: 6 ports detected [ 2.725520] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.730997] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 2.738760] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.748216] hub 4-0:1.0: USB hub found [ 2.752029] hub 4-0:1.0: 2 ports detected [ 2.757914] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.762809] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.776064] mmc1: Unknown controller version (3). You may experience problems. [ 2.783416] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.820438] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.828204] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.836071] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.843917] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.868653] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.876967] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.880396] ata1: SATA link down (SStatus 0 SControl 300) [ 2.892229] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.898536] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.904757] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.911702] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.919065] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.924597] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.930666] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.940386] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.950117] pci 0000:00:01.0: enabling Extended Tags [ 2.955081] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.964890] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.974731] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.981402] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.991411] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.997488] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.007280] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.017000] pci 0000:00:02.0: enabling Extended Tags [ 3.021986] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.031800] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.041642] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.048314] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.058363] PCI: bus0: Fast back to back transfers disabled [ 3.063979] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.072058] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.080341] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.086470] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.093608] PCI: bus1: Fast back to back transfers disabled [ 3.099266] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.106140] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.112259] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.117950] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.124813] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.132312] PCI: bus2: Fast back to back transfers disabled [ 3.137972] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.144778] mmc1: new high speed SDHC card at address aaaa [ 3.150091] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.160951] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.167914] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.174854] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.182877] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.189240] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.196805] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.201933] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.208899] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.216800] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.224305] mmcblk1: p1 p2 p3 [ 3.227824] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.234129] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.240247] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.246345] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.253195] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.261037] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.268241] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.274670] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.280690] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.287872] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.294314] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.300496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.306108] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.312028] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.348925] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x8fec126e, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.358513] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.370674] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.379935] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.386562] [drm] No driver support for vblank timestamp query. [ 3.525642] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.688544] Console: switching to colour frame buffer device 512x135 [ 3.784580] drm drm: fb0: frame buffer device [ 3.789238] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.796700] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.804043] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.813066] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.820465] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:24 UTC (946684944) [ 3.829224] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.838915] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.845551] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.847414] +USB0_VBUS_SW: disabling [ 3.847428] +1.8V_RUN_CAM: disabling [ 3.854223] +2.8V_RUN_CAM: disabling [ 3.857875] +1.2V_RUN_CAM_FRONT: disabling [ 3.861498] +1.05V_RUN_CAM_REAR: disabling [ 3.865103] +3.3V_RUN_TOUCH: disabling [ 3.869218] +2.8V_RUN_CAM_AF: disabling [ 3.873339] +1.8V_RUN_VPP_FUSE: disabling [ 3.877093] ALSA device list: [ 3.877096] #0: tegra-hda at 0x70038000 irq 346 [ 3.877098] #1: NVIDIA Tegra Jetson TK1 [ 3.896582] cfg80211: failed to load regulatory.db [ 3.902339] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.957610] EXT4-fs (mmcblk0p1): recovery complete [ 3.963472] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.971728] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.982793] devtmpfs: mounted [ 3.986262] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#