Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:27.867177945 -0800
+++ /tmp/foob	2017-12-12 22:07:27.871177965 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 21:53:47 PST 2017
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -77,9 +77,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000e128c120, 1 data @ 00000000cbf942cc)
+vdso: 2 pages (1 code @ 000000001f6b5fc9, 1 data @ 000000003c8c75fc)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -143,10 +143,10 @@
 pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
 pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000002658ad82)
+Trying to vfree() nonexistent vm area (000000009283e0c4)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -159,8 +159,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000804d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000009b x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -186,12 +186,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f888 ]---
+---[ end trace 09268a54394eeb59 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000098fad995)
+Trying to vfree() nonexistent vm area (000000007660b1f6)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -204,11 +204,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008055000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000000c8 x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090f0e10 
+x7 : 3730303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -231,12 +231,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f889 ]---
+---[ end trace 09268a54394eeb5a ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000f11eede0)
+Trying to vfree() nonexistent vm area (0000000079d3dfbd)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -249,8 +249,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000805d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000000f5 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -276,12 +276,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88a ]---
+---[ end trace 09268a54394eeb5b ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000be899571)
+Trying to vfree() nonexistent vm area (000000005083cb85)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -294,11 +294,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008065000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000122 x8 : 8006503d4ca25e00 
-x7 : 6230303030303030 x6 : ffff0000090f0e10 
+x7 : 3530303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -321,12 +321,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88b ]---
+---[ end trace 09268a54394eeb5c ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000dd71e4c1)
+Trying to vfree() nonexistent vm area (00000000e5b9e945)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -339,8 +339,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000806d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000014f x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -366,12 +366,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88c ]---
+---[ end trace 09268a54394eeb5d ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000006ed651f)
+Trying to vfree() nonexistent vm area (0000000007549630)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -384,8 +384,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008075000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000017c x8 : 8006503d4ca25e00 
 x7 : 3030303030303030 x6 : ffff0000090f0e10 
@@ -411,12 +411,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88d ]---
+---[ end trace 09268a54394eeb5e ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000ff4377b2)
+Trying to vfree() nonexistent vm area (000000004e24eb49)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -429,8 +429,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000807d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000001a9 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -456,12 +456,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88e ]---
+---[ end trace 09268a54394eeb5f ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000008487ca92)
+Trying to vfree() nonexistent vm area (000000002097741f)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -474,11 +474,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092b6000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000001d6 x8 : 8006503d4ca25e00 
-x7 : 3830303030303030 x6 : ffff0000090f0e10 
+x7 : 3230303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -501,12 +501,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f88f ]---
+---[ end trace 09268a54394eeb60 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000e7152d02)
+Trying to vfree() nonexistent vm area (00000000ddfca8c4)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -519,8 +519,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092bd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000203 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -546,12 +546,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f890 ]---
+---[ end trace 09268a54394eeb61 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000063dfa5c2)
+Trying to vfree() nonexistent vm area (0000000051832c57)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -564,11 +564,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092c5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000230 x8 : 8006503d4ca25e00 
-x7 : 3630303030303030 x6 : ffff0000090f0e10 
+x7 : 3530303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -591,12 +591,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f891 ]---
+---[ end trace 09268a54394eeb62 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000004a443596)
+Trying to vfree() nonexistent vm area (00000000bada0684)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -609,8 +609,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092cd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000025d x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -636,12 +636,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f892 ]---
+---[ end trace 09268a54394eeb63 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000007159a783)
+Trying to vfree() nonexistent vm area (000000007d6f7b2a)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -654,8 +654,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092d5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000028a x8 : 8006503d4ca25e00 
 x7 : 3730303030303030 x6 : ffff0000090f0e10 
@@ -681,12 +681,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f893 ]---
+---[ end trace 09268a54394eeb64 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000083b40c84)
+Trying to vfree() nonexistent vm area (000000004f4b8dd7)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -699,8 +699,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092dd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000002b7 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -726,12 +726,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f894 ]---
+---[ end trace 09268a54394eeb65 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000008afccd43)
+Trying to vfree() nonexistent vm area (0000000096dfafab)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -744,11 +744,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092e5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000002e4 x8 : 8006503d4ca25e00 
-x7 : 3830303030303030 x6 : ffff0000090f0e10 
+x7 : 3930303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -771,12 +771,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f895 ]---
+---[ end trace 09268a54394eeb66 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000008ed5cd5)
+Trying to vfree() nonexistent vm area (00000000378f6aeb)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -789,8 +789,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092ed000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000311 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -816,12 +816,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f896 ]---
+---[ end trace 09268a54394eeb67 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000c0e169e5)
+Trying to vfree() nonexistent vm area (00000000947fba46)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -834,11 +834,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092fe000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000033e x8 : 8006503d4ca25e00 
-x7 : 6330303030303030 x6 : ffff0000090f0e10 
+x7 : 3930303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -861,12 +861,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f897 ]---
+---[ end trace 09268a54394eeb68 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000001967f63d)
+Trying to vfree() nonexistent vm area (00000000dd2046d1)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -879,8 +879,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009305000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000036b x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -906,12 +906,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f898 ]---
+---[ end trace 09268a54394eeb69 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000003199857e)
+Trying to vfree() nonexistent vm area (000000009c634f34)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -924,11 +924,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000930d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000398 x8 : 8006503d4ca25e00 
-x7 : 3330303030303030 x6 : ffff0000090f0e10 
+x7 : 3930303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -951,12 +951,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f899 ]---
+---[ end trace 09268a54394eeb6a ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000cc601083)
+Trying to vfree() nonexistent vm area (00000000678fdac9)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -969,8 +969,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009315000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000003c5 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -996,12 +996,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89a ]---
+---[ end trace 09268a54394eeb6b ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000036082134)
+Trying to vfree() nonexistent vm area (0000000067ae7a1c)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1014,11 +1014,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000931d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000003f2 x8 : 8006503d4ca25e00 
-x7 : 3330303030303030 x6 : ffff0000090f0e10 
+x7 : 3630303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1041,12 +1041,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89b ]---
+---[ end trace 09268a54394eeb6c ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000035938e77)
+Trying to vfree() nonexistent vm area (000000005ac2e540)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1059,8 +1059,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009325000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000041f x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -1086,12 +1086,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89c ]---
+---[ end trace 09268a54394eeb6d ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000073cfa50e)
+Trying to vfree() nonexistent vm area (000000006f99ed4a)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1104,11 +1104,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000932d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000044c x8 : 8006503d4ca25e00 
-x7 : 3730303030303030 x6 : ffff0000090f0e10 
+x7 : 3630303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1131,12 +1131,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89d ]---
+---[ end trace 09268a54394eeb6e ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000007717a77a)
+Trying to vfree() nonexistent vm area (000000008fd2d0fc)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1149,8 +1149,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009335000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000479 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -1176,12 +1176,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89e ]---
+---[ end trace 09268a54394eeb6f ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000c82c06f9)
+Trying to vfree() nonexistent vm area (000000009392f4d3)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1194,11 +1194,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000933d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000004a6 x8 : 8006503d4ca25e00 
-x7 : 6330303030303030 x6 : ffff0000090f0e10 
+x7 : 3930303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1221,12 +1221,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f89f ]---
+---[ end trace 09268a54394eeb70 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000f556f2b0)
+Trying to vfree() nonexistent vm area (000000005970261f)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1239,8 +1239,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009345000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000004d3 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -1266,12 +1266,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a0 ]---
+---[ end trace 09268a54394eeb71 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000759cc28b)
+Trying to vfree() nonexistent vm area (00000000df58b010)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1284,11 +1284,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000934d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000500 x8 : 8006503d4ca25e00 
-x7 : 3730303030303030 x6 : ffff0000090f0e10 
+x7 : 6430303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1311,12 +1311,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a1 ]---
+---[ end trace 09268a54394eeb72 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000e9c28417)
+Trying to vfree() nonexistent vm area (0000000086ccd872)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1329,8 +1329,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009355000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000052d x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -1356,12 +1356,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a2 ]---
+---[ end trace 09268a54394eeb73 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000005f908c84)
+Trying to vfree() nonexistent vm area (00000000dc8458ca)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1374,11 +1374,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000935d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000055a x8 : 8006503d4ca25e00 
-x7 : 3530303030303030 x6 : ffff0000090f0e10 
+x7 : 6430303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1401,12 +1401,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a3 ]---
+---[ end trace 09268a54394eeb74 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000005941e0de)
+Trying to vfree() nonexistent vm area (00000000b05cb2c0)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1419,8 +1419,8 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009365000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000587 x8 : 8006503d4ca25e00 
 x7 : 3028206165726120 x6 : ffff0000090f0e10 
@@ -1446,12 +1446,12 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a4 ]---
+---[ end trace 09268a54394eeb75 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000bb2b5237)
+Trying to vfree() nonexistent vm area (000000004f38787d)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171213-339019-g41d8c16909eb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
@@ -1464,11 +1464,11 @@
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000936d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 0000000000000033 
-x13: 000000000000004c x12: 0000000000000000 
+x15: 0000000000000019 x14: 00000000000c8000 
+x13: 0000000000000f3c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000005b4 x8 : 8006503d4ca25e00 
-x7 : 6230303030303030 x6 : ffff0000090f0e10 
+x7 : 3430303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1491,5 +1491,5 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 50be160be067f8a5 ]---
+---[ end trace 09268a54394eeb76 ]---
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:27.927178243 -0800
+++ /tmp/foob	2017-12-12 22:07:27.927178243 -0800
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 21:47:42 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -371,20 +371,20 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+ mmcblk0: p1 p2 p3
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
- mmcblk0: p1 p2 p3
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
@@ -405,7 +405,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 12:50:30 UTC (957444630)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-05 12:49:45 UTC (957530985)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -417,5 +417,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.049120] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.049213] usb 1-1: new high-speed USB device number 2 using tegra-ehci
 asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:27.963178422 -0800
+++ /tmp/foob	2017-12-12 22:07:27.963178422 -0800
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 3.1 MiB/s
+	 ################################
+	 3.3 MiB/s
 done
-Bytes transferred = 6201632 (5ea120 hex)
+Bytes transferred = 6183552 (5e5a80 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ea120 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e5a80 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:46:36 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -81,7 +81,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998600K/2096128K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 31992K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998608K/2096128K available (9216K kernel code, 771K rwdata, 2556K rodata, 1024K init, 298K bss, 31984K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -127,7 +127,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 516034
+Built 1 zonelists, mobility grouping on.  Total pages: 516036
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -345,11 +345,11 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
  mmcblk0: p1 p2 p3
 iommu: Adding device 70080400.i2s to group 58
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
@@ -400,7 +400,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 12:47:33 UTC (957444453)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-05 12:47:08 UTC (957530828)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -418,4 +418,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.707759] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.572502] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:27.975178481 -0800
+++ /tmp/foob	2017-12-12 22:07:27.975178481 -0800
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.9 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 8114688 (7bd200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 21:47:42 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -390,6 +390,7 @@
 +USB0_VBUS_SW: supplied by +5V_SYS
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
+mmc0: new high speed MMC card at address 0001
 +3.3V_LP0: supplied by +3.3V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
@@ -397,7 +398,6 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
-mmc0: new high speed MMC card at address 0001
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
@@ -500,7 +500,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3c0fcca5, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x99c3d861, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -511,7 +511,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:43 UTC (946685083)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:27.987178543 -0800
+++ /tmp/foob	2017-12-12 22:07:27.991178561 -0800
@@ -32,21 +32,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
+	 ################################
 	 4 MiB/s
 done
-Bytes transferred = 6201632 (5ea120 hex)
+Bytes transferred = 6183552 (5e5a80 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ea120 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e5a80 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:46:36 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998492K/2096128K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998500K/2096128K available (9216K kernel code, 771K rwdata, 2556K rodata, 1024K init, 298K bss, 32092K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,7 +86,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -122,7 +122,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 516007
+Built 1 zonelists, mobility grouping on.  Total pages: 516009
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -412,10 +412,10 @@
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
@@ -480,22 +480,22 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
 pci 0000:00:01.0: PCI bridge to [bus 01]
- mmcblk1: p1 p2 p3
 pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
 pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
 pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
 pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+ mmcblk1: p1 p2 p3
 pci 0000:00:02.0: PCI bridge to [bus 02]
 pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
@@ -509,7 +509,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xb9dcd63a, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x531b9f8e, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.011178662 -0800
+++ /tmp/foob	2017-12-12 22:07:28.011178662 -0800
@@ -32,10 +32,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################################
-	 3.2 MiB/s
+	 ###########################################
+	 3.4 MiB/s
 done
-Bytes transferred = 6366968 (6126f8 hex)
+Bytes transferred = 6347664 (60db90 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x6126f8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x60db90 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-220547-gd207879 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:47:58 PST 2017
+Linux version 4.15.0-rc3-next-20171213-220778-g41d8c16 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:47:28 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997468K/2096128K available (9216K kernel code, 778K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997476K/2096128K available (9216K kernel code, 771K rwdata, 2816K rodata, 1024K init, 298K bss, 33116K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,7 +86,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -122,7 +122,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 515751
+Built 1 zonelists, mobility grouping on.  Total pages: 515753
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -412,9 +412,9 @@
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
@@ -488,18 +488,17 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
 pci 0000:00:01.0: PCI bridge to [bus 01]
- mmcblk1: p1 p2 p3
 pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
 pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
 pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
@@ -517,23 +516,20 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xef3b9322, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x027b4737, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
+[drm] Cannot find any crtc or sizes
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 iommu: Adding device cpufreq-dt.0 to group 77
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:29 UTC (946684949)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -545,11 +541,18 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 cfg80211: failed to load regulatory.db
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+ mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-bash: cannot set terminal process gr
\ No newline at end of file
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.031178758 -0800
+++ /tmp/foob	2017-12-12 22:07:28.035178780 -0800
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.6 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 8114688 (7bd200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 21:47:42 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -387,7 +387,6 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
@@ -403,18 +402,20 @@
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
-sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: Switching to 3.3V signalling voltage failed
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+elan_i2c 1-0015: reading cmd (0x0101) fail.
+elan_i2c 1-0015: failed to get product ID: -121
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: Switching to 3.3V signalling voltage failed
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
@@ -426,11 +427,15 @@
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 tegra-sor 54540000.sor: failed to probe output: -517
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 14:10:29 UTC (946735829)
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:29:41 UTC (946783781)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +1.8V_RUN_CAM: disabling
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -444,6 +449,8 @@
 +3.3V_PANEL: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -454,11 +461,6 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-[ pad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
-tegra-sor 54540000.sor: failed to probe output: -517
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
-panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.059178897 -0800
+++ /tmp/foob	2017-12-12 22:07:28.059178897 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,21 +40,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
+	 ################################
 	 3.6 MiB/s
 done
-Bytes transferred = 6201632 (5ea120 hex)
+Bytes transferred = 6183552 (5e5a80 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ea120 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e5a80 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:46:36 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999512K/2097148K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 32100K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999520K/2097148K available (9216K kernel code, 771K rwdata, 2556K rodata, 1024K init, 298K bss, 32092K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -131,7 +131,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 516262
+Built 1 zonelists, mobility grouping on.  Total pages: 516264
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -364,15 +364,12 @@
 iommu: Adding device snd-soc-dummy to group 74
 iommu: Adding device 70301100.i2s to group 75
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 max98090 0-0010: MAX98090 REVID=0x43
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
 max98090 0-0010: use default 2.8v micbias
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
@@ -425,19 +422,19 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:25:29 UTC (946783529)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 14:06:19 UTC (946735579)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
@@ -452,9 +449,14 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
-cfg80211: failed to load regulatory.db
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc2: new high speed SDHC card at address 0007
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+mmc1: new high speed SDIO card at address 0001
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
@@ -462,11 +464,11 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 panel-simple panel: panel supply power not found, using dummy regulator
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.079178997 -0800
+++ /tmp/foob	2017-12-12 22:07:28.079178997 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -40,21 +40,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################################
-	 3.6 MiB/s
+	 ###########################################
+	 3.5 MiB/s
 done
-Bytes transferred = 6366968 (6126f8 hex)
+Bytes transferred = 6347664 (60db90 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x6126f8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x60db90 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-220547-gd207879 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:47:58 PST 2017
+Linux version 4.15.0-rc3-next-20171213-220778-g41d8c16 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:47:28 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1998496K/2097148K available (9216K kernel code, 771K rwdata, 2816K rodata, 1024K init, 298K bss, 33116K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -131,7 +131,7 @@
 SMP: Total of 4 processors activated (96.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 516006
+Built 1 zonelists, mobility grouping on.  Total pages: 516008
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -364,15 +364,12 @@
 iommu: Adding device snd-soc-dummy to group 74
 iommu: Adding device 70301100.i2s to group 75
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 max98090 0-0010: MAX98090 REVID=0x43
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
 max98090 0-0010: use default 2.8v micbias
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
@@ -433,20 +430,19 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:26:06 UTC (946783566)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 14:06:57 UTC (946735617)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
@@ -459,19 +455,29 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmc1: new high speed SDIO card at address 0001
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
@@ -481,17 +487,13 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.080011] alloc_contig_range: [fbc77, fbc78) PFNs busy
-alloc_contig_range: [fbc78, fbc79) PFNs busy
+root@(none):/# [    3.116056] alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
-alloc_contig_range: [fbc7a, fbc7b) PFNs busy
 alloc_contig_range: [fbc7b, fbc7c) PFNs busy
 alloc_contig_range: [fbc7c, fbc7d) PFNs busy
 alloc_contig_range: [fbc7d, fbc7e) PFNs busy
 alloc_contig_range: [fbc7e, fbc7f) PFNs busy
 alloc_contig_range: [fbc7f, fbc80) PFNs busy
 alloc_contig_range: [fbca1, fbca2) PFNs busy
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not 
\ No newline at end of file
+alloc_contig_range: [fbca2, fbca3) PFNs busy
+alloc_contig_range: [fbca3, fbca4) PFNs busy
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.087179037 -0800
+++ /tmp/foob	2017-12-12 22:07:28.091179057 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801910 us
+Bootloader-Cpu Init at (time stamp): 1801507 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801884  us
-Bootloader (AosInit) time: 734252 us
-Bootloader Main Init time: 180113 us
-BlockDevMgrInit time: 157532 us
+Miscellaneous avp time: 1801481  us
+Bootloader (AosInit) time: 733509 us
+Bootloader Main Init time: 180173 us
+BlockDevMgrInit time: 157553 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 76630 us 
-Display init time: 574931 us
+Partition Table load: 77088 us 
+Display init time: 574514 us
 Kernel read time: 1551 msec
 Load Kernel Size:   20551680 Bytes
 Bl Kernel ReadSpeed: 13250000 Bytes/sec
-Pre-Kernel Jump time: 4345713 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9518804 us
+Pre-Kernel Jump time: 4346881 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9515872 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 21:53:47 PST 2017
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -150,9 +150,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000006e72ebdd, 1 data @ 0000000093d029f6)
+vdso: 2 pages (1 code @ 00000000d2218c62, 1 data @ 000000006e3e704b)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -285,9 +285,12 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
@@ -297,7 +300,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1152K
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.135179276 -0800
+++ /tmp/foob	2017-12-12 22:07:28.139179296 -0800
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.6 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 8114688 (7bd200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 21:47:42 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -268,7 +268,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd2484228, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0f54cb9, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -342,15 +342,15 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
- mmcblk1: p1 p2
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.147179334 -0800
+++ /tmp/foob	2017-12-12 22:07:28.147179334 -0800
@@ -45,21 +45,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 4.1 MiB/s
+	 ################################
+	 4 MiB/s
 done
-Bytes transferred = 6201632 (5ea120 hex)
+Bytes transferred = 6183552 (5e5a80 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ea120 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5e5a80 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:46:36 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959420K/1048576K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 23620K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959428K/1048576K available (9216K kernel code, 771K rwdata, 2556K rodata, 1024K init, 298K bss, 23612K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -133,7 +133,7 @@
 SMP: Total of 2 processors activated (4.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 256239
+Built 1 zonelists, mobility grouping on.  Total pages: 256241
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 512 (order: 3, 32768 bytes)
@@ -259,7 +259,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xaffa76af, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xfd8ee74b, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -329,26 +329,26 @@
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
  mmcblk1: p1 p2
+hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 ALSA device list:
   #0: tegra-trimslice
 Waiting for root device PARTUUID=11eb23c1-01...
+cfg80211: failed to load regulatory.db
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.179179494 -0800
+++ /tmp/foob	2017-12-12 22:07:28.183179512 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 800034 us
-Basic modules init took 348817 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 15471 us
-Carveout took 252671 us
-CPU initialization took 92457 us
-Total time taken by TegraBoot 709416 us
+Tegraboot started after 817172 us
+Basic modules init took 348714 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14386 us
+Carveout took 252679 us
+CPU initialization took 92459 us
+Total time taken by TegraBoot 708238 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.639] LPDDR4 Training: Number of tables = 10
+64b[0001.654] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -104,11 +104,11 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17183232 bytes read in 876 ms (18.7 MiB/s)
+17183232 bytes read in 865 ms (18.9 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 453 ms (95.7 KiB/s)
+44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:50:43 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 21:50:20 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -235,7 +235,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000a8b178a5, 1 data @ 00000000c2acf30b)
+vdso: 2 pages (1 code @ 00000000c299a83c, 1 data @ 000000002649a292)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.195179573 -0800
+++ /tmp/foob	2017-12-12 22:07:28.199179594 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 735828 us
-Basic modules init took 349693 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14382 us
-Carveout took 252676 us
-CPU initialization took 92421 us
-Total time taken by TegraBoot 709172 us
+Tegraboot started after 731138 us
+Basic modules init took 348823 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14364 us
+Carveout took 252683 us
+CPU initialization took 92450 us
+Total time taken by TegraBoot 708320 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.576] LPDDR4 Training: Number of tables = 10
+64b[0001.570] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17052160 bytes read in 847 ms (19.2 MiB/s)
+17052160 bytes read in 854 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 454 ms (95.7 KiB/s)
+44764 bytes read in 453 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 21:53:47 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -235,7 +235,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000013997469, 1 data @ 000000005fd97bea)
+vdso: 2 pages (1 code @ 00000000a23530e1, 1 data @ 00000000eef35293)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.223179712 -0800
+++ /tmp/foob	2017-12-12 22:07:28.227179731 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 21:53:47 PST 2017
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -111,7 +111,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000c2df9c21, 1 data @ 000000006d8602fc)
+vdso: 2 pages (1 code @ 00000000eaf2245e, 1 data @ 00000000ad257ced)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -268,7 +268,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-09-22 11:23:49 UTC (1001157829)
+max77686-rtc max77620-rtc: setting system clock to 2001-09-23 11:23:55 UTC (1001244235)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.263179911 -0800
+++ /tmp/foob	2017-12-12 22:07:28.263179911 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8114688 (7bd200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
+Linux version 4.15.0-rc3-next-20171213-339019-g41d8c16909eb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 21:47:42 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -434,7 +434,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xbaec29d5, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x5df6dc59, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -465,4 +465,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.434056] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.444027] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 22:07:28.287180029 -0800
+++ /tmp/foob	2017-12-12 22:07:28.287180029 -0800
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################
-	 3.2 MiB/s
+	 ################################
+	 3.3 MiB/s
 done
-Bytes transferred = 6201632 (5ea120 hex)
+Bytes transferred = 6183552 (5e5a80 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ea120 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e5a80 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
+Linux version 4.15.0-rc3-next-20171213-19070-g41d8c16 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 21:46:36 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -80,7 +80,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998528K/2096128K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 32064K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998536K/2096128K available (9216K kernel code, 771K rwdata, 2556K rodata, 1024K init, 298K bss, 32056K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,7 +90,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 772 kB)
        .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -125,7 +125,7 @@
 SMP: Total of 4 processors activated (8.00 BogoMIPS).
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 516016
+Built 1 zonelists, mobility grouping on.  Total pages: 516018
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 futex hash table entries: 1024 (order: 4, 65536 bytes)
@@ -429,7 +429,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf44b542a, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x3863bda5, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -466,4 +466,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.687638] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.607270] usb 2-1: new high-speed USB device number 2 using tegra-ehci
