Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.398452492 -0800
+++ /tmp/foob	2017-12-11 22:04:39.402452511 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 06:37:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -27,16 +27,16 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998472K/1048576K available (9788K kernel code, 1162K rwdata, 4500K rodata, 1152K init, 394K bss, 33720K reserved, 16384K cma-reserved)
+Memory: 998464K/1048576K available (9788K kernel code, 1164K rwdata, 4508K rodata, 1152K init, 396K bss, 33728K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0x        (ptrval) - 0x        (ptrval)   (  9792 KB)
     .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4544 KB)
       .init : 0x        (ptrval) - 0x        (ptrval)   (  1152 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1163 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   395 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+      .data : 0x        (ptrval) - 0x        (ptrval)   (  1165 KB)
+       .bss : 0x        (ptrval) - 0x        (ptrval)   (   397 KB)
+    fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
               0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
@@ -59,7 +59,7 @@
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
 Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
@@ -69,7 +69,7 @@
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 253714
+Built 1 zonelists, mobility grouping on.  Total pages: 253712
 Policy zone: DMA
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -77,9 +77,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.176:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000001fe36cdf, 1 data @ 000000008146e1ff)
+vdso: 2 pages (1 code @ 00000000e128c120, 1 data @ 00000000cbf942cc)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -143,27 +143,27 @@
 pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
 pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000fd9a79a2)
+Trying to vfree() nonexistent vm area (000000002658ad82)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000804d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000009b x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -186,29 +186,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3552b ]---
+---[ end trace 50be160be067f888 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000f14c76ca)
+Trying to vfree() nonexistent vm area (0000000098fad995)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008055000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000000c8 x8 : 8006503d4ca25e00 
-x7 : 6630303030303030 x6 : ffff0000090efe10 
+x7 : 3930303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -231,29 +231,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3552c ]---
+---[ end trace 50be160be067f889 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000063999ff8)
+Trying to vfree() nonexistent vm area (00000000f11eede0)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000805d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000000f5 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -276,29 +276,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3552d ]---
+---[ end trace 50be160be067f88a ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000068aa733d)
+Trying to vfree() nonexistent vm area (00000000be899571)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008065000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000122 x8 : 8006503d4ca25e00 
-x7 : 3630303030303030 x6 : ffff0000090efe10 
+x7 : 6230303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -321,29 +321,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3552e ]---
+---[ end trace 50be160be067f88b ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000b5659018)
+Trying to vfree() nonexistent vm area (00000000dd71e4c1)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000806d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000014f x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -366,29 +366,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3552f ]---
+---[ end trace 50be160be067f88c ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000dc699762)
+Trying to vfree() nonexistent vm area (0000000006ed651f)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000008075000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000017c x8 : 8006503d4ca25e00 
-x7 : 6430303030303030 x6 : ffff0000090efe10 
+x7 : 3030303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -411,29 +411,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35530 ]---
+---[ end trace 50be160be067f88d ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000e157bd80)
+Trying to vfree() nonexistent vm area (00000000ff4377b2)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000807d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000001a9 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -456,29 +456,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35531 ]---
+---[ end trace 50be160be067f88e ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000096b8085e)
+Trying to vfree() nonexistent vm area (000000008487ca92)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
-x19: ffff0000092b5000 x18: 0000000000000007 
+x19: ffff0000092b6000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000001d6 x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090efe10 
+x7 : 3830303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -501,29 +501,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35532 ]---
+---[ end trace 50be160be067f88f ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000323c2fdc)
+Trying to vfree() nonexistent vm area (00000000e7152d02)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092bd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000203 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -546,29 +546,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35533 ]---
+---[ end trace 50be160be067f890 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000000e546206)
+Trying to vfree() nonexistent vm area (0000000063dfa5c2)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092c5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000230 x8 : 8006503d4ca25e00 
-x7 : 3030303030303030 x6 : ffff0000090efe10 
+x7 : 3630303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -591,29 +591,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35534 ]---
+---[ end trace 50be160be067f891 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000062c3595a)
+Trying to vfree() nonexistent vm area (000000004a443596)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092cd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000025d x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -636,29 +636,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35535 ]---
+---[ end trace 50be160be067f892 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000006872c5ea)
+Trying to vfree() nonexistent vm area (000000007159a783)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092d5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000028a x8 : 8006503d4ca25e00 
-x7 : 3630303030303030 x6 : ffff0000090efe10 
+x7 : 3730303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -681,29 +681,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35536 ]---
+---[ end trace 50be160be067f893 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000a39215e6)
+Trying to vfree() nonexistent vm area (0000000083b40c84)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092dd000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000002b7 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -726,29 +726,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35537 ]---
+---[ end trace 50be160be067f894 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000ec79ee81)
+Trying to vfree() nonexistent vm area (000000008afccd43)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092e5000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000002e4 x8 : 8006503d4ca25e00 
-x7 : 6530303030303030 x6 : ffff0000090efe10 
+x7 : 3830303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -771,29 +771,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35538 ]---
+---[ end trace 50be160be067f895 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000007805ca70)
+Trying to vfree() nonexistent vm area (0000000008ed5cd5)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092ed000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000311 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -816,29 +816,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35539 ]---
+---[ end trace 50be160be067f896 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000e1a9980a)
+Trying to vfree() nonexistent vm area (00000000c0e169e5)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff0000092fe000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000033e x8 : 8006503d4ca25e00 
-x7 : 6530303030303030 x6 : ffff0000090efe10 
+x7 : 6330303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -861,29 +861,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553a ]---
+---[ end trace 50be160be067f897 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000308863a9)
+Trying to vfree() nonexistent vm area (000000001967f63d)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009305000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000036b x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -906,29 +906,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553b ]---
+---[ end trace 50be160be067f898 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000038bbe719)
+Trying to vfree() nonexistent vm area (000000003199857e)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000930d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000398 x8 : 8006503d4ca25e00 
-x7 : 3330303030303030 x6 : ffff0000090efe10 
+x7 : 3330303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -951,29 +951,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553c ]---
+---[ end trace 50be160be067f899 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000049da00f3)
+Trying to vfree() nonexistent vm area (00000000cc601083)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009315000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000003c5 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -996,29 +996,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553d ]---
+---[ end trace 50be160be067f89a ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000027954e6c)
+Trying to vfree() nonexistent vm area (0000000036082134)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000931d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000003f2 x8 : 8006503d4ca25e00 
-x7 : 3230303030303030 x6 : ffff0000090efe10 
+x7 : 3330303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1041,29 +1041,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553e ]---
+---[ end trace 50be160be067f89b ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000d085b653)
+Trying to vfree() nonexistent vm area (0000000035938e77)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009325000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000041f x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1086,29 +1086,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb3553f ]---
+---[ end trace 50be160be067f89c ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000098db8e3b)
+Trying to vfree() nonexistent vm area (0000000073cfa50e)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000932d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000044c x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090efe10 
+x7 : 3730303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1131,29 +1131,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35540 ]---
+---[ end trace 50be160be067f89d ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000aa7a95ca)
+Trying to vfree() nonexistent vm area (000000007717a77a)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009335000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000479 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1176,29 +1176,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35541 ]---
+---[ end trace 50be160be067f89e ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000094311289)
+Trying to vfree() nonexistent vm area (00000000c82c06f9)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000933d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000004a6 x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090efe10 
+x7 : 6330303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1221,29 +1221,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35542 ]---
+---[ end trace 50be160be067f89f ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000a193c723)
+Trying to vfree() nonexistent vm area (00000000f556f2b0)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009345000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000004d3 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1266,29 +1266,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35543 ]---
+---[ end trace 50be160be067f8a0 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (0000000092bf4597)
+Trying to vfree() nonexistent vm area (00000000759cc28b)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000934d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000500 x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090efe10 
+x7 : 3730303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1311,29 +1311,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35544 ]---
+---[ end trace 50be160be067f8a1 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (000000000c01e9ab)
+Trying to vfree() nonexistent vm area (00000000e9c28417)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009355000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000052d x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1356,29 +1356,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35545 ]---
+---[ end trace 50be160be067f8a2 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000ae275a38)
+Trying to vfree() nonexistent vm area (000000005f908c84)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000935d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 000000000000055a x8 : 8006503d4ca25e00 
-x7 : 6130303030303030 x6 : ffff0000090efe10 
+x7 : 3530303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1401,29 +1401,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35546 ]---
+---[ end trace 50be160be067f8a3 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000804755fe)
+Trying to vfree() nonexistent vm area (000000005941e0de)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff000009365000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 0000000000000587 x8 : 8006503d4ca25e00 
-x7 : 3028206165726120 x6 : ffff0000090efe10 
+x7 : 3028206165726120 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1446,29 +1446,29 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35547 ]---
+---[ end trace 50be160be067f8a4 ]---
 ------------[ cut here ]------------
-Trying to vfree() nonexistent vm area (00000000904d0de1)
+Trying to vfree() nonexistent vm area (00000000bb2b5237)
 WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc2-next-20171211-338510-g153e8244ebcb #1
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-next-20171212-338788-gd20787938ddb #1
 Hardware name: linux,dummy-virt (DT)
 pstate: 60000005 (nZCv daif -PAN -UAO)
 pc : __vunmap+0xc8/0xd0
 lr : __vunmap+0xc8/0xd0
 sp : ffff00000802bb60
 x29: ffff00000802bb60 x28: ffff000008f0d0a0 
-x27: ffff0000090c7000 x26: ffff000008e804ac 
+x27: ffff0000090c8000 x26: ffff000008e804ac 
 x25: ffff000008f0d100 x24: ffff00000802bc08 
 x23: ffff00000802bc08 x22: ffff000008fa9000 
 x21: 0000000000000000 x20: 0000000000000000 
 x19: ffff00000936d000 x18: 0000000000000007 
 x17: 000000000000000e x16: 0000000000000001 
-x15: 0000000000000019 x14: 00000000000c8000 
-x13: 0000000000000f3c x12: 0000000000000000 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
 x11: 00000000ffffffff x10: 0000000000000006 
 x9 : 00000000000005b4 x8 : 8006503d4ca25e00 
-x7 : 3930303030303030 x6 : ffff0000090efe10 
+x7 : 6230303030303030 x6 : ffff0000090f0e10 
 x5 : 0000000000000000 x4 : 0000000000000000 
 x3 : ffffffffffffffff x2 : ffff000008fc2e60 
 x1 : ffff80003d9d8000 x0 : 0000000000000000 
@@ -1491,8 +1491,5 @@
  kernel_init_freeable+0x1a4/0x25c
  kernel_init+0x10/0xfc
  ret_from_fork+0x10/0x18
----[ end trace 9d131c1aeeb35548 ]---
+---[ end trace 50be160be067f8a5 ]---
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
-cacheinfo: Unable to detect cache hierarchy for CPU 0
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.430452639 -0800
+++ /tmp/foob	2017-12-11 22:04:39.434452656 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
+	 #################################
 	 3.3 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8114688 (7bd200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bd200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992568K/2096128K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 38024K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992568K/2096128K available (11264K kernel code, 1582K rwdata, 4312K rodata, 2048K init, 404K bss, 38024K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -372,11 +372,10 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
@@ -385,6 +384,7 @@
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+ mmcblk0: p1 p2 p3
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
@@ -405,7 +405,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-03 21:34:08 UTC (957389648)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 12:50:30 UTC (957444630)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -417,5 +417,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.069279] usb 1-1: new high-speed USB device number 2 using tegra-ehci
-[    4
\ No newline at end of file
+root@(none):/# [    4.049120] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.438452675 -0800
+++ /tmp/foob	2017-12-11 22:04:39.442452693 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 3.2 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 6205376 (5eafc0 hex)
+Bytes transferred = 6201632 (5ea120 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5eafc0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ea120 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -344,8 +344,8 @@
 iommu: Adding device snd-soc-dummy to group 57
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmc0: new high speed SDHC card at address aaaa
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmc0: new high speed SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
@@ -400,7 +400,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-03 21:31:25 UTC (957389485)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 12:47:33 UTC (957444453)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -418,4 +418,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.678560] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.707759] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.466452803 -0800
+++ /tmp/foob	2017-12-11 22:04:39.470452821 -0800
@@ -34,10 +34,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
+	 #################################
 	 3.9 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8114688 (7bd200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -48,7 +48,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bd200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992460K/2096128K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 38132K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992460K/2096128K available (11264K kernel code, 1582K rwdata, 4312K rodata, 2048K init, 404K bss, 38132K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -397,6 +397,7 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
+mmc0: new high speed MMC card at address 0001
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
@@ -417,15 +418,9 @@
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
- mmcblk0: p1
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
 scsi host0: tegra-ahci
@@ -464,7 +459,6 @@
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
@@ -506,23 +500,18 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xdc641605, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3c0fcca5, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
- mmcblk1: p1 p2 p3
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
+[drm] Cannot find any crtc or sizes
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 iommu: Adding device cpufreq-dt.0 to group 74
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:27 UTC (946684947)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:43 UTC (946685083)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -531,12 +520,24 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+ mmcblk1: p1 p2 p3
+ata1: SATA link down (SStatus 0 SControl 300)
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
+ mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.478452858 -0800
+++ /tmp/foob	2017-12-11 22:04:39.482452876 -0800
@@ -35,18 +35,18 @@
 	 #################################
 	 4 MiB/s
 done
-Bytes transferred = 6205376 (5eafc0 hex)
+Bytes transferred = 6201632 (5ea120 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5eafc0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ea120 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -461,8 +461,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 ata1: SATA link down (SStatus 0 SControl 300)
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
@@ -480,21 +480,21 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
 pci 0000:00:01.0: PCI bridge to [bus 01]
+ mmcblk1: p1 p2 p3
 pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
 pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
 pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
- mmcblk1: p1 p2 p3
 pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
 pci 0000:00:02.0: PCI bridge to [bus 02]
 pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
@@ -509,7 +509,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9a6d2a6e, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xb9dcd63a, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.494452931 -0800
+++ /tmp/foob	2017-12-11 22:04:39.498452949 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ############################################
-	 3.8 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6369832 (613228 hex)
+Bytes transferred = 6366968 (6126f8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x613228 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6126f8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-220269-g153e824 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:31:38 PST 2017
+Linux version 4.15.0-rc3-next-20171212-220547-gd207879 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:47:58 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -455,8 +455,8 @@
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
-tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
@@ -488,6 +488,8 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
@@ -497,6 +499,7 @@
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
 pci 0000:00:01.0: PCI bridge to [bus 01]
+ mmcblk1: p1 p2 p3
 pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
 pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
 pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
@@ -514,22 +517,23 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x61e8bdf0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xef3b9322, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 iommu: Adding device cpufreq-dt.0 to group 77
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:29 UTC (946684949)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -541,18 +545,11 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
- mmcblk1: p1 p2 p3
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+bash: cannot set terminal process gr
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.538453132 -0800
+++ /tmp/foob	2017-12-11 22:04:39.542453150 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,10 +42,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 3.5 MiB/s
+	 #################################
+	 3.6 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8114688 (7bd200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7bd200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993476K/2097148K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 38136K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993476K/2097148K available (11264K kernel code, 1582K rwdata, 4312K rodata, 2048K init, 404K bss, 38136K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -420,13 +420,14 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 12:13:48 UTC (946728828)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:29:41 UTC (946783781)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -443,7 +444,6 @@
 +3.3V_PANEL: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
-mmc1: new high speed SDIO card at address 0001
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.566453260 -0800
+++ /tmp/foob	2017-12-11 22:04:39.566453260 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,18 +43,18 @@
 	 #################################
 	 3.6 MiB/s
 done
-Bytes transferred = 6205376 (5eafc0 hex)
+Bytes transferred = 6201632 (5ea120 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5eafc0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ea120 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -432,11 +432,10 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 12:09:28 UTC (946728568)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:25:29 UTC (946783529)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -453,6 +452,7 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
+cfg80211: failed to load regulatory.db
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -462,11 +462,11 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-sor 54540000.sor: failed to probe output: -517
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 panel-simple panel: panel supply power not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.594453388 -0800
+++ /tmp/foob	2017-12-11 22:04:39.598453406 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ############################################
-	 3.3 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6369832 (613228 hex)
+Bytes transferred = 6366968 (6126f8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x613228 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6126f8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-220269-g153e824 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:31:38 PST 2017
+Linux version 4.15.0-rc3-next-20171212-220547-gd207879 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:47:58 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -440,10 +440,11 @@
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 12:10:05 UTC (946728605)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-02 03:26:06 UTC (946783566)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -458,16 +459,15 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
-cfg80211: failed to load regulatory.db
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
@@ -481,7 +481,7 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.990546] alloc_contig_range: [fbc77, fbc78) PFNs busy
+root@(none):/# [    3.080011] alloc_contig_range: [fbc77, fbc78) PFNs busy
 alloc_contig_range: [fbc78, fbc79) PFNs busy
 alloc_contig_range: [fbc79, fbc7a) PFNs busy
 alloc_contig_range: [fbc7a, fbc7b) PFNs busy
@@ -494,4 +494,4 @@
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
+panel-simple panel: panel supply power not 
\ No newline at end of file
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.602453424 -0800
+++ /tmp/foob	2017-12-11 22:04:39.606453443 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1802389 us
+Bootloader-Cpu Init at (time stamp): 1801910 us
 
 Pinmux changes applied in kernel way
 
@@ -59,25 +59,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 4 us
+Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1802362  us
-Bootloader (AosInit) time: 733440 us
-Bootloader Main Init time: 185471 us
-BlockDevMgrInit time: 157561 us
-PartMgrInit time: 9 us
+Miscellaneous avp time: 1801884  us
+Bootloader (AosInit) time: 734252 us
+Bootloader Main Init time: 180113 us
+BlockDevMgrInit time: 157532 us
+PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77172 us 
-Display init time: 574542 us
-Kernel read time: 1550 msec
-Load Kernel Size:   20549632 Bytes
-Bl Kernel ReadSpeed: 13257000 Bytes/sec
-Pre-Kernel Jump time: 4346586 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9521608 us
+Partition Table load: 76630 us 
+Display init time: 574931 us
+Kernel read time: 1551 msec
+Load Kernel Size:   20551680 Bytes
+Bl Kernel ReadSpeed: 13250000 Bytes/sec
+Pre-Kernel Jump time: 4345713 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9518804 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 06:37:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -100,16 +100,16 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1705588K/1775616K available (9788K kernel code, 1162K rwdata, 4500K rodata, 1152K init, 394K bss, 53644K reserved, 16384K cma-reserved)
+Memory: 1705580K/1775616K available (9788K kernel code, 1164K rwdata, 4508K rodata, 1152K init, 396K bss, 53652K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0x        (ptrval) - 0x        (ptrval)   (  9792 KB)
     .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4544 KB)
       .init : 0x        (ptrval) - 0x        (ptrval)   (  1152 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1163 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   395 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+      .data : 0x        (ptrval) - 0x        (ptrval)   (  1165 KB)
+       .bss : 0x        (ptrval) - 0x        (ptrval)   (   397 KB)
+    fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
               0xffff7e0000000000 - 0xffff7e0001b18000   (    27 MB actual)
@@ -133,7 +133,7 @@
 Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
-ASID allocator initialised with 256 entries
+ASID allocator initialised with 128 entries
 Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
@@ -142,7 +142,7 @@
 CPU features: detected feature: 32-bit EL0 Support
 CPU: All CPU(s) started at EL1
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 430493
+Built 1 zonelists, mobility grouping on.  Total pages: 430491
 Policy zone: DMA
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -152,7 +152,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000b40f328a, 1 data @ 00000000f9b1f534)
+vdso: 2 pages (1 code @ 000000006e72ebdd, 1 data @ 0000000093d029f6)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -268,19 +268,19 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-NET: Registered protocol family 17
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
+NET: Registered protocol family 17
 9pnet: Installing 9P2000 support
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 Key type dns_resolver registered
 registered taskstats version 1
 Loading compiled-in X.509 certificates
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
 +VDD_LED: supplied by +VDD_MUX
 +5V_USB_HS: supplied by +5V_SYS
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.626453534 -0800
+++ /tmp/foob	2017-12-11 22:04:39.630453552 -0800
@@ -2,53 +2,18 @@
 
 Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.87 sec
+	Execution Time 56.49 sec
 	Percent passed so far: 50.0
 	
 
 
 Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 56.0 sec
+	Execution Time 56.02 sec
 	Percent passed so far: 100.0
 	
 
 Final Score: 100.0
-init: Starting service 'ShTouch'...
-lr388k7_ts spi1.0: dev_open
-healthd: battery l=100 v=0 t=21.0 h=2 st=2 chg=a
-healthd: Charger state changed from disconnected to connected
-init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
-acc_open
-acc_release
-tegra_cec 3960000.tegra_cec: set logical address: 0x0
-tegra_cec 3960000.tegra_cec: set logical address: 0x0
-gpio tegra-gpio wake18 for gpio=101(M:5)
-IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
-tegra-xusb 3530000.xhci: exiting ELPG
-tegra-xusb 3530000.xhci: Firmware timestamp: 2017-10-31 06:33:14 UTC, Version: 55.08 debug
-tegra-xusb 3530000.xhci: exiting ELPG done
-type=1400 audit(1477060415.972:7): avc: denied { write } for pid=3443 comm="Binder:3443_2" name="xt_quota" dev="proc" ino=4026532549 scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=dir permissive=1
-type=1400 audit(1477060415.972:8): avc: denied { add_name } for pid=3443 comm="Binder:3443_2" name="globalAlert" scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=dir permissive=1
-type=1400 audit(1477060415.972:9): avc: denied { create } for pid=3443 comm="Binder:3443_2" name="globalAlert" scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=1
-type=1400 audit(1477060415.972:10): avc: denied { associate } for pid=3443 comm="Binder:3443_2" name="globalAlert" scontext=u:object_r:proc_net:s0 tcontext=u:object_r:proc:s0 tclass=filesystem permissive=1
-tegra_cec 3960000.tegra_cec: set logical address: 0x10
-nvdec 15480000.nvdec: fw name:nvhost_nvdec_bl030_prod.fw
-nvdec 15480000.nvdec: fw name:nvhost_nvdec030_prod.fw
-[TRUSTY] [secure_otf] C> te_create_instance_iface: OTF
-init: Service 'bootanim' (pid 3909) exited with status 0
-type=1400 audit(1477060417.676:11): avc: denied { add_name } for pid=1 comm="init" name="uevent_in_suspend" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
-init: Starting service 'nvpmodel'...
-BOOT_COMPLETE
-init: cannot find '/system/xbin/qvs_post_boot.sh' (No such file or directory), disabling 'qvs_post_boot'
-init: cannot find '/data/boot_script.sh' (No such file or directory), disabling 'boot_script'
-init: Service 'nvpmodel' (pid 4390) exited with status 0
-type=1400 audit(1477060417.676:12): avc: denied { create } for pid=1 comm="init" name="uevent_in_suspend" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
-tegra-xusb 3530000.xhci: entering ELPG
-tegra-xusb 3530000.xhci: entering ELPG done
-mtp_open
-eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx
-IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
 I> rst_source : 0x0
 I> rst_level : 0x0
@@ -132,7 +97,7 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
+I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
 I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
@@ -304,7 +269,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 28046564 bytes
+I> Total write size is 28067068 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -334,7 +299,7 @@
 I> Total write size is 20848 bytes
 I> Write successful.
 I> Writing kernel partition
-I> Total write size is 6735872 bytes
+I> Total write size is 6737920 bytes
 I> Write successful.
 I> Writing kernel-dtb partition
 I> Total write size is 248128 bytes
@@ -554,20 +519,20 @@
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
 I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
-I> Move ramdisk (len: 6265174) from 0xa8072800 to 0x98000000
+I> Move ramdisk (len: 6267130) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9956
+I> Ramdisk: Base: 0x98000000; Size: 0x5fa0fa
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139063
+I> add_serialno: Serial Num = 0320817139136
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2629/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139063 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2507/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139136 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:60:06
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:60:07
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:60:08
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:61:b3
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:61:b4
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:61:b5
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -608,13 +573,7 @@
 Model: NVIDIA P2771-0000-500
 DRAM:  7.8 GiB
 MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2 [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -816,24 +775,24 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.779] I> [OK]
+I> Checking boot.img header magic ... [0001.780] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265174) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.797] I> Done
+I> Move ramdisk (len: 6267130) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9956
+I> Ramdisk: Base: 0x98000000; Size: 0x5fa0fa
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139063
+I> add_serialno: Serial Num = 0320817139136
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2629/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139063 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2507/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139136 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:60:06
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:60:07
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:60:08
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:61:b3
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:61:b4
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:61:b5
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -882,23 +841,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 1
+mmc_init: -123, time 0
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 70 ms (5.9 KiB/s)
+431 bytes read in 65 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265174 bytes read in 209 ms (28.6 MiB/s)
+6267130 bytes read in 210 ms (28.5 MiB/s)
 Retrieving file: /boot/Image
-17183232 bytes read in 457 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2629/nfsroot,nolock,nfsvers=2 rootwait
+17185280 bytes read in 458 ms (35.8 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2507/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 52 ms (329.1 KiB/s)
+17547 bytes read in 57 ms (299.8 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -1008,21 +967,21 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-10-21 14:35:34 UTC (1477060534)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address ae:5c:00:ba:0b:65
+max77686-rtc max77620-rtc: setting system clock to 2016-09-06 12:38:48 UTC (1473165528)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 5e:eb:c6:2b:46:01
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 dwmac4: Master AXI performs any burst length
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmc2: new high speed MMC card at address 0001
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=ae:5c:00:ba:0b:65, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=5e:eb:c6:2b:46:01, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -1032,7 +991,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Fri Oct 21 14:35:37 UTC 2016
+L4T-INITRD Build DATE: Tue Sep  6 12:38:51 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1044,106 +1003,106 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-Started Forward Password Requests to Wall Directory Watch.
-systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
-Listening on /dev/initctl Compatibility Named Pipe.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-Started Dispatch Password Requests to Console Directory Watch.
+systemd[1]: Listening on udev Kernel Socket.
+Listening on udev Kernel Socket.
+systemd[1]: Listening on udev Control Socket.
+Listening on udev Control Socket.
 systemd[1]: Created slice User and Session Slice.
 Created slice User and Session Slice.
-systemd[1]: Reached target Swap.
-Reached target Swap.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
-Listening on Journal Socket (/dev/log).
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
+systemd[1]: Reached target Encrypted Volumes.
 Reached target Encrypted Volumes.
-Reached target Paths.
+systemd[1]: Listening on Journal Socket.
 Listening on Journal Socket.
+systemd[1]: Created slice System Slice.
 Created slice System Slice.
 Created slice system-getty.slice.
+         Mounting POSIX Message Queue File System...
+         Mounting Debug File System...
 Created slice system-serial\x2dgetty.slice.
          Starting Create Static Device Nodes in /dev...
-Reached target Slices.
-         Mounting POSIX Message Queue File System...
          Starting Remount Root and Kernel File Systems...
-         Mounting Debug File System...
+Started Dispatch Password Requests to Console Directory Watch.
+Reached target Paths.
          Mounting Huge Pages File System...
-         Starting Journal Service...
          Starting Load Kernel Modules...
-Listening on udev Control Socket.
+Reached target Slices.
+Listening on Syslog Socket.
          Mounting RPC Pipe File System...
-Listening on udev Kernel Socket.
+Listening on /dev/initctl Compatibility Named Pipe.
+Reached target Swap.
+Listening on Journal Audit Socket.
+Listening on Journal Socket (/dev/log).
+         Starting Journal Service...
+Mounted Huge Pages File System.
 Mounted Debug File System.
 Mounted POSIX Message Queue File System.
-Mounted Huge Pages File System.
 Mounted RPC Pipe File System.
+Started Create Static Device Nodes in /dev.
 Started Remount Root and Kernel File Systems.
 Started Load Kernel Modules.
          Starting Apply Kernel Variables...
          Mounting Configuration File System...
          Starting Load/Save Random Seed...
          Starting udev Coldplug all Devices...
-Mounted Configuration File System.
-Started Journal Service.
-Started Create Static Device Nodes in /dev.
-Started Load/Save Random Seed.
+         Starting udev Kernel Device Manager...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
          Starting Set console keymap...
          Starting Preprocess NFS configuration...
-         Starting udev Kernel Device Manager...
-         Starting Flush Journal to Persistent Storage...
+Mounted Configuration File System.
+Started Journal Service.
 Started Apply Kernel Variables.
+Started Load/Save Random Seed.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-         Starting Raise network interfaces...
-systemd-journald[1499]: Received request to flush runtime journal from PID 1
-Started Flush Journal to Persistent Storage.
 Started Preprocess NFS configuration.
-Started udev Coldplug all Devices.
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
+         Starting Raise network interfaces...
+         Starting Flush Journal to Persistent Storage...
+systemd-journald[1504]: Received request to flush runtime journal from PID 1
+Started udev Kernel Device Manager.
+Started udev Coldplug all Devices.
+Started Flush Journal to Persistent Storage.
          Starting Create Volatile Files and Directories...
+Found device /dev/ttyS0.
 Started Create Volatile Files and Directories.
-         Starting Update UTMP about System Boot/Shutdown...
+Started Raise network interfaces.
+Reached target Network.
+Reached target Network is Online.
 Reached target System Time Synchronized.
-Started udev Kernel Device Manager.
+         Starting Update UTMP about System Boot/Shutdown...
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Started Daily Cleanup of Temporary Directories.
-Listening on RPCbind Server Activation Socket.
 Started Daily apt activities.
-Reached target Timers.
 Listening on D-Bus System Message Bus Socket.
+Listening on RPCbind Server Activation Socket.
 Reached target Sockets.
 Reached target Basic System.
-Started Regular background program processing daemon.
-         Starting System Logging Service...
          Starting Login Service...
-         Starting Permit User Sessions...
          Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started Regular background program processing daemon.
+         Starting System Logging Service...
+         Starting OpenBSD Secure Shell server...
 Started D-Bus System Message Bus.
-Started System Logging Service.
-Started Permit User Sessions.
-Found device /dev/ttyS0.
-Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
+Started Daily Cleanup of Temporary Directories.
+Reached target Timers.
          Starting LSB: Start NTP daemon...
-         Starting OpenBSD Secure Shell server...
          Starting /etc/rc.local Compatibility...
-Started Login Service.
+         Starting Permit User Sessions...
+Started System Logging Service.
 Started /etc/rc.local Compatibility.
-Started Serial Getty on ttyS0.
+Started Permit User Sessions.
 Started Getty on tty1.
+Started Serial Getty on ttyS0.
 Reached target Login Prompts.
-Started LSB: Start NTP daemon.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Login Service.
 Started OpenBSD Secure Shell server.
+Started LSB: Start NTP daemon.
 Reached target Multi-User System.
 Reached target Graphical Interface.
          Starting Update UTMP about System Runlevel Changes...
@@ -1353,24 +1312,24 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.778] I> [OK]
+I> Checking boot.img header magic ... [0001.779] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
-I> Move ramdisk (len: 6265174) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6267130) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9956
+I> Ramdisk: Base: 0x98000000; Size: 0x5fa0fa
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817139063
+I> add_serialno: Serial Num = 0320817139136
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2629/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139063 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2507/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817139136 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:60:06
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:60:07
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:60:08
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:61:b3
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:61:b4
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:61:b5
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
@@ -1419,23 +1378,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 1
+mmc_init: -123, time 0
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 69 ms (5.9 KiB/s)
+431 bytes read in 66 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265174 bytes read in 209 ms (28.6 MiB/s)
+6267130 bytes read in 209 ms (28.6 MiB/s)
 Retrieving file: /boot/Image
-17183232 bytes read in 457 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2629/nfsroot,nolock,nfsvers=2 rootwait
+17185280 bytes read in 458 ms (35.8 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2507/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 52 ms (329.1 KiB/s)
+17547 bytes read in 56 ms (305.7 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -1545,21 +1504,21 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-10-21 14:36:36 UTC (1477060596)
+max77686-rtc max77620-rtc: setting system clock to 2016-09-06 12:39:49 UTC (1473165589)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address d6:54:e1:0f:5d:36
+Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
+dwmac4: Master AXI performs any burst length
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmc2: new high speed MMC card at address 0001
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 3a:8a:29:d7:75:da
-Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
-dwmac4: Master AXI performs any burst length
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=3a:8a:29:d7:75:da, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=d6:54:e1:0f:5d:36, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -1569,7 +1528,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1152K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Fri Oct 21 14:36:39 UTC 2016
+L4T-INITRD Build DATE: Tue Sep  6 12:39:53 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1581,55 +1540,55 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Created slice System Slice.
-Created slice System Slice.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
-systemd[1]: Created slice system-serial\x2dgetty.slice.
-Created slice system-serial\x2dgetty.slice.
 systemd[1]: Listening on udev Kernel Socket.
 Listening on udev Kernel Socket.
-systemd[1]: Listening on Journal Audit Socket.
-Listening on Journal Audit Socket.
+systemd[1]: Reached target Swap.
+Reached target Swap.
 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
 Started Dispatch Password Requests to Console Directory Watch.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-Reached target Slices.
-Listening on /dev/initctl Compatibility Named Pipe.
-Reached target Encrypted Volumes.
-Reached target Swap.
-Listening on Journal Socket (/dev/log).
-Created slice system-getty.slice.
+systemd[1]: Listening on Journal Socket.
+Listening on Journal Socket.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
 Started Forward Password Requests to Wall Directory Watch.
+systemd[1]: Reached target Paths.
 Reached target Paths.
+Reached target Encrypted Volumes.
+Created slice System Slice.
+         Mounting RPC Pipe File System...
+Created slice system-getty.slice.
+         Mounting POSIX Message Queue File System...
+         Starting Remount Root and Kernel File Systems...
+         Starting Load Kernel Modules...
+Listening on /dev/initctl Compatibility Named Pipe.
+Listening on Journal Socket (/dev/log).
 Listening on udev Control Socket.
-Listening on Journal Socket.
          Starting Create Static Device Nodes in /dev...
          Mounting Huge Pages File System...
-         Starting Remount Root and Kernel File Systems...
-         Starting Load Kernel Modules...
-         Mounting RPC Pipe File System...
          Mounting Debug File System...
+Listening on Syslog Socket.
          Starting Journal Service...
-         Mounting POSIX Message Queue File System...
+Created slice User and Session Slice.
+Reached target Slices.
+Created slice system-serial\x2dgetty.slice.
+Mounted Huge Pages File System.
 Mounted Debug File System.
 Mounted POSIX Message Queue File System.
-Mounted Huge Pages File System.
 Mounted RPC Pipe File System.
 Started Journal Service.
-Started Create Static Device Nodes in /dev.
 Started Remount Root and Kernel File Systems.
 Started Load Kernel Modules.
+Started Create Static Device Nodes in /dev.
+         Starting udev Kernel Device Manager...
          Mounting Configuration File System...
          Starting Apply Kernel Variables...
-         Starting udev Coldplug all Devices...
          Starting Load/Save Random Seed...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
          Starting Preprocess NFS configuration...
          Starting Set console keymap...
-         Starting udev Kernel Device Manager...
+         Starting udev Coldplug all Devices...
          Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
 Started Apply Kernel Variables.
@@ -1638,21 +1597,24 @@
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
 Started udev Kernel Device Manager.
-systemd-journald[1501]: Received request to flush runtime journal from PID 1
+systemd-journald[1505]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
          Starting Raise network interfaces...
 Started Flush Journal to Persistent Storage.
+         Starting Create Volatile Files [   10.574391] run-parts[2156]: undefined instruction: pc=00000000137d2ce0
+and Directories...
+Code: a94573fb a8d27bfd d65f03c0 d503201f (910006e0) 
 Started udev Coldplug all Devices.
-         Starting Create Volatile Files and Directories...
+Failed to start Raise network interfaces.
+See 'systemctl status networking.service' for details.
 Found device /dev/ttyS0.
 Started Create Volatile Files and Directories.
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
          Starting Update UTMP about System Boot/Shutdown...
 Reached target System Time Synchronized.
+Reached target Network.
+Reached target Network is Online.
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
 Listening on RPCbind Server Activation Socket.
@@ -1663,19 +1625,19 @@
 Reached target Sockets.
 Reached target Basic System.
          Starting System Logging Service...
+Started Regular background program processing daemon.
          Starting OpenBSD Secure Shell server...
-Started D-Bus System Message Bus.
-         Starting Permit User Sessions...
+         Starting Login Service...
          Starting /etc/rc.local Compatibility...
-Started Regular background program processing daemon.
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting Permit User Sessions...
+Started D-Bus System Message Bus.
          Starting LSB: Start NTP daemon...
-         Starting Login Service...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
 Started System Logging Service.
-Started Permit User Sessions.
 Started /etc/rc.local Compatibility.
-Started Serial Getty on ttyS0.
+Started Permit User Sessions.
 Started Getty on tty1.
+Started Serial Getty on ttyS0.
 Reached target Login Prompts.
 Started OpenBSD Secure Shell server.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.666453717 -0800
+++ /tmp/foob	2017-12-11 22:04:39.666453717 -0800
@@ -47,10 +47,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
+	 #################################
 	 3.6 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8114688 (7bd200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7bd200 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -91,7 +91,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953396K/1048576K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 29644K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953396K/1048576K available (11264K kernel code, 1582K rwdata, 4312K rodata, 2048K init, 404K bss, 29644K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -268,7 +268,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xb4049db3, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd2484228, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -343,14 +343,14 @@
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
- mmcblk1: p1 p2
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+ mmcblk1: p1 p2
 Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.674453754 -0800
+++ /tmp/foob	2017-12-11 22:04:39.678453772 -0800
@@ -46,9 +46,9 @@
 	 #################################################################
 	 #################################################################
 	 #################################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 6205376 (5eafc0 hex)
+Bytes transferred = 6201632 (5ea120 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5eafc0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ea120 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -259,7 +259,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x75826640, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xaffa76af, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.686453808 -0800
+++ /tmp/foob	2017-12-11 22:04:39.690453827 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 770421 us
-Basic modules init took 348686 us
-Sec Bootdevice Read Time = 205 ms, Read Size = 8459 KB
-Next stage binary read took 16787 us
-Carveout took 252677 us
-CPU initialization took 92452 us
-Total time taken by TegraBoot 710602 us
+Tegraboot started after 800034 us
+Basic modules init took 348817 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 15471 us
+Carveout took 252671 us
+CPU initialization took 92457 us
+Total time taken by TegraBoot 709416 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.611] LPDDR4 Training: Number of tables = 10
+64b[0001.639] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -104,11 +104,11 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-17183232 bytes read in 875 ms (18.7 MiB/s)
+17183232 bytes read in 876 ms (18.7 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 453 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 496 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 06:34:38 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:50:43 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2981964K/3131392K available (9788K kernel code, 1164K rwdata, 4636K rodata, 1152K init, 396K bss, 133044K reserved, 16384K cma-reserved)
+Memory: 2981960K/3131392K available (9788K kernel code, 1164K rwdata, 4640K rodata, 1152K init, 396K bss, 133048K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -180,7 +180,7 @@
       .init : 0x        (ptrval) - 0x        (ptrval)   (  1152 KB)
       .data : 0x        (ptrval) - 0x        (ptrval)   (  1165 KB)
        .bss : 0x        (ptrval) - 0x        (ptrval)   (   397 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+    fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
               0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
@@ -207,7 +207,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
@@ -225,7 +225,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749587
+Built 1 zonelists, mobility grouping on.  Total pages: 749586
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -235,7 +235,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000ea62ed7e, 1 data @ 00000000d7d9ac75)
+vdso: 2 pages (1 code @ 00000000a8b178a5, 1 data @ 00000000c2acf30b)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -271,7 +271,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 80a00000
+kvm [1]: IDMAP page: 80a01000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.718453955 -0800
+++ /tmp/foob	2017-12-11 22:04:39.722453973 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 755970 us
-Basic modules init took 348513 us
+Tegraboot started after 735828 us
+Basic modules init took 349693 us
 Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14390 us
-Carveout took 253779 us
-CPU initialization took 92466 us
-Total time taken by TegraBoot 709148 us
+Next stage binary read took 14382 us
+Carveout took 252676 us
+CPU initialization took 92421 us
+Total time taken by TegraBoot 709172 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.595] LPDDR4 Training: Number of tables = 10
+64b[0001.576] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,7 +117,7 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-17050112 bytes read in 852 ms (19.1 MiB/s)
+17052160 bytes read in 847 ms (19.2 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 06:37:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,16 +171,16 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2982096K/3131392K available (9788K kernel code, 1162K rwdata, 4500K rodata, 1152K init, 394K bss, 132912K reserved, 16384K cma-reserved)
+Memory: 2982088K/3131392K available (9788K kernel code, 1164K rwdata, 4508K rodata, 1152K init, 396K bss, 132920K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0x        (ptrval) - 0x        (ptrval)   (  9792 KB)
     .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4544 KB)
       .init : 0x        (ptrval) - 0x        (ptrval)   (  1152 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1163 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   395 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+      .data : 0x        (ptrval) - 0x        (ptrval)   (  1165 KB)
+       .bss : 0x        (ptrval) - 0x        (ptrval)   (   397 KB)
+    fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
               0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
@@ -207,7 +207,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
@@ -225,7 +225,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 749620
+Built 1 zonelists, mobility grouping on.  Total pages: 749618
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -235,7 +235,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000051ce4a28, 1 data @ 000000005dda33d2)
+vdso: 2 pages (1 code @ 0000000013997469, 1 data @ 000000005fd97bea)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -271,7 +271,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f8000
+kvm [1]: IDMAP page: 809f9000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.758454137 -0800
+++ /tmp/foob	2017-12-11 22:04:39.758454137 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 06:37:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 11 21:53:59 PST 2017
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -30,16 +30,16 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835240K/2988032K available (9788K kernel code, 1162K rwdata, 4500K rodata, 1152K init, 394K bss, 136408K reserved, 16384K cma-reserved)
+Memory: 2835236K/2988032K available (9788K kernel code, 1164K rwdata, 4508K rodata, 1152K init, 396K bss, 136412K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0x        (ptrval) - 0x        (ptrval)   (  9792 KB)
     .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4544 KB)
       .init : 0x        (ptrval) - 0x        (ptrval)   (  1152 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1163 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   395 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+      .data : 0x        (ptrval) - 0x        (ptrval)   (  1165 KB)
+       .bss : 0x        (ptrval) - 0x        (ptrval)   (   397 KB)
+    fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
               0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
@@ -82,7 +82,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 random: fast init done
@@ -101,7 +101,7 @@
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
-Built 1 zonelists, mobility grouping on.  Total pages: 712906
+Built 1 zonelists, mobility grouping on.  Total pages: 712905
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -111,7 +111,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000092dab833, 1 data @ 0000000032501cb4)
+vdso: 2 pages (1 code @ 00000000c2df9c21, 1 data @ 000000006d8602fc)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -152,9 +152,9 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 3412K
+Freeing initrd memory: 3408K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809f8000
+kvm [1]: IDMAP page: 809f9000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -268,7 +268,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-09-21 20:07:23 UTC (1001102843)
+max77686-rtc max77620-rtc: setting system clock to 2001-09-22 11:23:49 UTC (1001157829)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.782454248 -0800
+++ /tmp/foob	2017-12-11 22:04:39.786454265 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################
-	 2.8 MiB/s
+	 #################################
+	 2.9 MiB/s
 done
-Bytes transferred = 8118784 (7be200 hex)
+Bytes transferred = 8114688 (7bd200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7be200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7bd200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017
+Linux version 4.15.0-rc3-next-20171212-338788-gd20787938ddb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 21:48:00 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992496K/2096128K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 38096K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992496K/2096128K available (11264K kernel code, 1582K rwdata, 4312K rodata, 2048K init, 404K bss, 38096K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -434,7 +434,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x27785c0f, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xbaec29d5, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -465,4 +465,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.434075] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.434056] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-11 22:04:39.818454412 -0800
+++ /tmp/foob	2017-12-11 22:04:39.822454430 -0800
@@ -40,7 +40,7 @@
 	 #################################
 	 3.2 MiB/s
 done
-Bytes transferred = 6205376 (5eafc0 hex)
+Bytes transferred = 6201632 (5ea120 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5eafc0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ea120 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017
+Linux version 4.15.0-rc3-next-20171212-18839-gd207879 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 21:46:54 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -429,7 +429,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x938e336d, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf44b542a, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -466,4 +466,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.687654] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.687638] usb 2-1: new high-speed USB device number 2 using tegra-ehci
