U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# 4 MiB/s done Bytes transferred = 6205376 (5eafc0 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5eafc0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171211-18561-g153e824 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:30:54 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998492K/2096128K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007477] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017006] Switching to timer-based delay loop, resolution 1000ns [ 0.024188] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029229] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039976] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047945] Switching to timer-based delay loop, resolution 83ns [ 0.054418] Console: colour dummy device 80x30 [ 0.058361] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068670] pid_max: default: 32768 minimum: 301 [ 0.073753] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079855] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087704] CPU: Testing write buffer coherency: ok [ 0.092020] /cpus/cpu@0 missing clock-frequency property [ 0.097028] /cpus/cpu@1 missing clock-frequency property [ 0.102338] /cpus/cpu@2 missing clock-frequency property [ 0.107602] /cpus/cpu@3 missing clock-frequency property [ 0.112873] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152989] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157745] Hierarchical SRCU implementation. [ 0.173500] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193010] smp: Bringing up secondary CPUs ... [ 0.243563] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323675] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403790] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413442] smp: Brought up 1 node, 4 CPUs [ 0.432529] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438697] CPU: All CPU(s) started in SVC mode. [ 0.445126] devtmpfs: initialized [ 0.466225] Built 1 zonelists, mobility grouping on. Total pages: 516007 [ 0.471510] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479068] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488548] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.494936] pinctrl core: initialized pinctrl subsystem [ 0.501073] NET: Registered protocol family 16 [ 0.505533] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512605] cpuidle: using governor menu [ 0.537962] No ATAGs? [ 0.538097] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.546458] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.554132] iommu: Adding device reg-dummy to group 0 [ 0.557336] iommu: Adding device 1003000.pcie to group 1 [ 0.562634] iommu: Adding device 50000000.host1x to group 2 [ 0.568195] iommu: Adding device 54200000.dc to group 3 [ 0.573375] iommu: Adding device 54240000.dc to group 4 [ 0.578560] iommu: Adding device 54280000.hdmi to group 5 [ 0.583948] iommu: Adding device 57000000.gpu to group 6 [ 0.589220] iommu: Adding device 60005000.timer to group 7 [ 0.594655] iommu: Adding device 60007000.flow-controller to group 8 [ 0.601006] iommu: Adding device 6000c800.actmon to group 9 [ 0.606529] iommu: Adding device 6000d000.gpio to group 10 [ 0.612006] iommu: Adding device 60020000.dma to group 11 [ 0.617364] iommu: Adding device 70000800.apbmisc to group 12 [ 0.623100] iommu: Adding device 70000868.pinmux to group 13 [ 0.628726] iommu: Adding device 70006000.serial to group 14 [ 0.634367] iommu: Adding device 70006040.serial to group 15 [ 0.639980] iommu: Adding device 70006300.serial to group 16 [ 0.645634] iommu: Adding device 7000c000.i2c to group 17 [ 0.650987] iommu: Adding device 7000c400.i2c to group 18 [ 0.656378] iommu: Adding device 7000c500.i2c to group 19 [ 0.661739] iommu: Adding device 7000c700.i2c to group 20 [ 0.667133] iommu: Adding device 7000d000.i2c to group 21 [ 0.672480] iommu: Adding device 7000d400.spi to group 22 [ 0.677874] iommu: Adding device 7000da00.spi to group 23 [ 0.683229] iommu: Adding device 7000e000.rtc to group 24 [ 0.688622] iommu: Adding device 7000e400.pmc to group 25 [ 0.693974] iommu: Adding device 7000f800.fuse to group 26 [ 0.699452] iommu: Adding device 70019000.memory-controller to group 27 [ 0.706021] iommu: Adding device 7001b000.emc to group 28 [ 0.711418] iommu: Adding device 70027000.sata to group 29 [ 0.716854] iommu: Adding device 70030000.hda to group 30 [ 0.722253] iommu: Adding device 70090000.usb to group 31 [ 0.727602] iommu: Adding device 7009f000.padctl to group 32 [ 0.733261] iommu: Adding device 700b0400.sdhci to group 33 [ 0.738780] iommu: Adding device 700b0600.sdhci to group 34 [ 0.744346] iommu: Adding device 70015000.cec to group 35 [ 0.749714] iommu: Adding device 700e2000.thermal-sensor to group 36 [ 0.756048] iommu: Adding device 70110000.clock to group 37 [ 0.761574] iommu: Adding device 70300000.ahub to group 38 [ 0.767053] iommu: Adding device 7d000000.usb to group 39 [ 0.772408] iommu: Adding device 7d000000.usb-phy to group 40 [ 0.778152] iommu: Adding device 7d004000.usb to group 41 [ 0.783502] iommu: Adding device 7d004000.usb-phy to group 42 [ 0.789244] iommu: Adding device 7d008000.usb to group 43 [ 0.794595] iommu: Adding device 7d008000.usb-phy to group 44 [ 0.800331] iommu: Adding device pmu to group 45 [ 0.804907] iommu: Adding device timer to group 46 [ 0.809674] iommu: Adding device clocks to group 47 [ 0.814545] iommu: Adding device gpio-keys to group 48 [ 0.819642] iommu: Adding device regulators to group 49 [ 0.824867] iommu: Adding device regulators:regulator@0 to group 50 [ 0.831080] iommu: Adding device regulators:regulator@1 to group 51 [ 0.837346] iommu: Adding device regulators:regulator@2 to group 52 [ 0.843561] iommu: Adding device regulators:regulator@3 to group 53 [ 0.849818] iommu: Adding device regulators:regulator@4 to group 54 [ 0.856041] iommu: Adding device regulators:regulator@7 to group 55 [ 0.862299] iommu: Adding device regulators:regulator@8 to group 56 [ 0.868528] iommu: Adding device regulators:regulator@10 to group 57 [ 0.874866] iommu: Adding device regulators:regulator@11 to group 58 [ 0.881174] iommu: Adding device regulators:regulator@12 to group 59 [ 0.887520] iommu: Adding device regulators:regulator@13 to group 60 [ 0.893827] iommu: Adding device regulators:regulator@14 to group 61 [ 0.900171] iommu: Adding device sound to group 62 [ 0.921773] +5V_SYS: supplied by +VDD_MUX [ 0.924261] +3.3V_SYS: supplied by +VDD_MUX [ 0.928825] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.934147] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.942269] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.947997] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.956226] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.963013] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.971211] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.977029] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.985251] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.990804] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.999030] +12V_SATA: Failed to request enable GPIO242: -517 [ 1.004669] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 1.014110] vgaarb: loaded [ 1.016269] SCSI subsystem initialized [ 1.019451] libata version 3.00 loaded. [ 1.023351] usbcore: registered new interface driver usbfs [ 1.028574] usbcore: registered new interface driver hub [ 1.033866] usbcore: registered new device driver usb [ 1.042072] Linux video capture interface: v2.00 [ 1.044854] pps_core: LinuxPPS API ver. 1 registered [ 1.049745] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.058856] PTP clock support registered [ 1.064157] Advanced Linux Sound Architecture Driver Initialized. [ 1.069459] Bluetooth: Core ver 2.22 [ 1.072389] NET: Registered protocol family 31 [ 1.076780] Bluetooth: HCI device and connection manager initialized [ 1.083092] Bluetooth: HCI socket layer initialized [ 1.087958] Bluetooth: L2CAP socket layer initialized [ 1.092998] Bluetooth: SCO socket layer initialized [ 1.098454] clocksource: Switched to clocksource arch_sys_counter [ 1.195261] NET: Registered protocol family 2 [ 1.198719] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.205397] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.212481] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.218968] TCP: Hash tables configured (established 8192 bind 8192) [ 1.225576] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.231051] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.237635] NET: Registered protocol family 1 [ 1.242379] RPC: Registered named UNIX socket transport module. [ 1.247542] RPC: Registered udp transport module. [ 1.252249] RPC: Registered tcp transport module. [ 1.256902] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.263780] iommu: Adding device regulatory.0 to group 63 [ 1.268963] PCI: CLS 0 bytes, default 64 [ 1.274407] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.281438] iommu: Adding device alarmtimer to group 64 [ 1.287066] Initialise system trusted keyrings [ 1.290555] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.298129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.303410] NFS: Registering the id_resolver key type [ 1.307615] Key type id_resolver registered [ 1.311794] Key type id_legacy registered [ 1.320868] Key type asymmetric registered [ 1.323055] Asymmetric key parser 'x509' registered [ 1.328047] bounce: pool size: 64 pages [ 1.331805] io scheduler noop registered (default) [ 1.336489] io scheduler mq-deadline registered [ 1.341012] io scheduler kyber registered [ 1.346825] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.351808] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.358766] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.374649] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.378354] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.388266] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.399007] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.405951] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.411548] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.417351] iommu: Adding device serial8250 to group 65 [ 1.424261] console [ttyS0] disabled [ 1.426023] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.435343] console [ttyS0] enabled [ 1.435343] console [ttyS0] enabled [ 1.441170] bootconsole [earlycon0] disabled [ 1.441170] bootconsole [earlycon0] disabled [ 1.450538] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.461587] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.490158] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.509761] loop: module loaded [ 1.514318] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.521783] as3722 4-0040: AS3722 with revision 0x1 found [ 1.529415] iommu: Adding device as3722-pinctrl to group 66 [ 1.536670] iommu: Adding device as3722-regulator to group 67 [ 1.545361] as3722-sd2: supplied by +5V_SYS [ 1.550044] as3722-sd3: supplied by +5V_SYS [ 1.554459] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.560848] as3722-sd4: supplied by +5V_SYS [ 1.565518] as3722-sd5: supplied by +5V_SYS [ 1.571619] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.577710] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.583972] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.589932] as3722-ldo3: supplied by +3.3V_SYS [ 1.594434] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.602260] as3722-ldo4: supplied by +3.3V_SYS [ 1.606934] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.613194] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.618037] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.625013] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.630687] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.636865] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.647077] iommu: Adding device as3722-rtc to group 68 [ 1.652492] iommu: Adding device as3722-adc to group 69 [ 1.657865] iommu: Adding device as3722-power-off to group 70 [ 1.663788] iommu: Adding device as3722-wdt to group 71 [ 1.669796] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.688546] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.695280] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.701236] libphy: Fixed MDIO Bus: probed [ 1.705330] CAN device driver interface [ 1.709233] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.716182] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.721910] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.729376] usbcore: registered new interface driver pegasus [ 1.735091] usbcore: registered new interface driver asix [ 1.740559] usbcore: registered new interface driver ax88179_178a [ 1.746697] usbcore: registered new interface driver cdc_ether [ 1.752618] usbcore: registered new interface driver smsc75xx [ 1.758422] usbcore: registered new interface driver smsc95xx [ 1.764236] usbcore: registered new interface driver net1080 [ 1.769965] usbcore: registered new interface driver cdc_subset [ 1.775931] usbcore: registered new interface driver zaurus [ 1.781588] usbcore: registered new interface driver cdc_ncm [ 1.787484] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.793133] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.798857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.805376] ehci-pci: EHCI PCI platform driver [ 1.809892] tegra-ehci: Tegra EHCI driver [ 1.816739] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.822179] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.830008] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.858486] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.865320] hub 1-0:1.0: USB hub found [ 1.869131] hub 1-0:1.0: 1 port detected [ 1.874295] usbcore: registered new interface driver cdc_acm [ 1.879969] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.888027] usbcore: registered new interface driver cdc_wdm [ 1.893785] usbcore: registered new interface driver usb-storage [ 1.901415] iommu: Adding device ci_hdrc.0 to group 73 [ 1.913387] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.920286] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.928089] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.935292] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.941828] i2c /dev entries driver [ 1.946578] usbcore: registered new interface driver uvcvideo [ 1.952341] USB Video Class driver (1.1.1) [ 1.956432] gspca_main: v2.14.0 registered [ 1.961189] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.971477] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.979986] iommu: Adding device cpufreq-tegra124 to group 74 [ 1.986288] sdhci: Secure Digital Host Controller Interface driver [ 1.992482] sdhci: Copyright(c) Pierre Ossman [ 1.996833] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.002832] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.007721] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.029018] mmc0: Unknown controller version (3). You may experience problems. [ 2.036275] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.073424] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.081843] usbcore: registered new interface driver usbhid [ 2.087451] usbhid: USB HID core driver [ 2.093753] iommu: Adding device snd-soc-dummy to group 75 [ 2.136719] mmc0: new high speed MMC card at address 0001 [ 2.147390] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.157030] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.168122] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.174299] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 2.183444] mmcblk0: p1 [ 2.538988] iommu: Adding device 70301100.i2s to group 76 [ 2.545288] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.565632] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.576456] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.587689] NET: Registered protocol family 10 [ 2.593566] Segment Routing with IPv6 [ 2.597403] mip6: Mobile IPv6 [ 2.600394] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.607795] NET: Registered protocol family 17 [ 2.612314] NET: Registered protocol family 15 [ 2.616767] can: controller area network core (rev 20170425 abi 9) [ 2.623172] NET: Registered protocol family 29 [ 2.627613] can: raw protocol (rev 20170425) [ 2.631897] can: broadcast manager protocol (rev 20170425 t) [ 2.637556] can: netlink gateway (rev 20170425) max_hops=1 [ 2.643285] Bluetooth: RFCOMM socket layer initialized [ 2.648434] Bluetooth: RFCOMM ver 1.11 [ 2.652211] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.657522] Bluetooth: BNEP socket layer initialized [ 2.662501] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.668419] Bluetooth: HIDP socket layer initialized [ 2.673660] Key type dns_resolver registered [ 2.678425] Registering SWP/SWPB emulation handler [ 2.684043] Loading compiled-in X.509 certificates [ 2.706585] +3.3V_RUN: supplied by +3.3V_SYS [ 2.711734] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.716432] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.722472] +5V_USB_HS: supplied by +5V_SYS [ 2.727673] +3.3V_LP0: supplied by +3.3V_SYS [ 2.733120] +5V_HDMI_CON: supplied by +5V_SYS [ 2.737908] +5V_SATA: supplied by +5V_SYS [ 2.742589] +12V_SATA: supplied by +VDD_MUX [ 2.748199] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.755061] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.762251] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.769773] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.775383] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.784514] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.793903] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.802299] as3722-sd2: supplied by +5V_SYS [ 2.806785] as3722-sd3: supplied by +5V_SYS [ 2.811487] as3722-sd4: supplied by +5V_SYS [ 2.816008] as3722-sd5: supplied by +5V_SYS [ 2.821795] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.827242] as3722-ldo1: supplied by +3.3V_RUN [ 2.832188] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.837817] as3722-ldo3: supplied by +3.3V_SYS [ 2.843648] as3722-ldo4: supplied by +3.3V_SYS [ 2.848396] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.854300] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.862904] as3722-ldo6: supplied by +3.3V_RUN [ 2.867897] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.873313] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.880432] as3722-ldo9: supplied by +5V_SYS [ 2.885898] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.892664] as3722-ldo10: supplied by +5V_SYS [ 2.897770] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.904636] as3722-ldo11: supplied by +3.3V_RUN [ 2.909955] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.919541] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.928608] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.939160] scsi host0: tegra-ahci [ 2.943579] scsi host1: tegra-ahci [ 2.947291] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.955336] ata2: DUMMY [ 2.958966] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.964405] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.972276] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.998586] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.005718] hub 2-0:1.0: USB hub found [ 3.009594] hub 2-0:1.0: 1 port detected [ 3.026517] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 [ 3.036325] tegra-xusb 70090000.usb: failed to request firmware: -2 [ 3.042644] tegra-xusb 70090000.usb: failed to load firmware: -2 [ 3.049375] tegra-xusb: probe of 70090000.usb failed with error -2 [ 3.056399] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.061347] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.072733] mmc1: Unknown controller version (3). You may experience problems. [ 3.080075] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.118099] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.125849] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 3.133418] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 3.141412] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 3.166175] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 3.174495] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 3.188552] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 3.194834] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.201136] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.208117] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.215543] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.221135] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.227167] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.236940] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.246754] pci 0000:00:01.0: enabling Extended Tags [ 3.251845] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.261661] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.271550] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.278276] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.288428] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.292101] ata1: SATA link down (SStatus 0 SControl 300) [ 3.300049] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.309780] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.319517] pci 0000:00:02.0: enabling Extended Tags [ 3.324482] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.334292] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.344135] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.350813] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.360871] PCI: bus0: Fast back to back transfers disabled [ 3.366487] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.374567] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.382869] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.389016] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.396130] PCI: bus1: Fast back to back transfers disabled [ 3.401788] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.408706] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.414859] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.420561] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.427425] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.434978] PCI: bus2: Fast back to back transfers disabled [ 3.440641] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.447448] mmc1: new high speed SDHC card at address aaaa [ 3.452787] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.463631] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.470592] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.477521] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.485426] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.491779] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.499374] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.504476] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.511445] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.519370] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.526855] mmcblk1: p1 p2 p3 [ 3.530126] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.536439] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.541682] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.548865] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.555652] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.563497] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.570675] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.577083] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.583158] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.590330] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.596733] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.603044] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.608711] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.614571] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.650207] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9a6d2a6e, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.659797] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.671963] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.681403] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.688028] [drm] No driver support for vblank timestamp query. [ 3.828304] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.992515] Console: switching to colour frame buffer device 512x135 [ 4.088471] drm drm: fb0: frame buffer device [ 4.093008] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.100310] iommu: Adding device cpufreq-dt.0 to group 77 [ 4.105971] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 4.113317] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 4.122359] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 4.129737] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813) [ 4.138497] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.148001] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.154653] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.158888] +USB0_VBUS_SW: disabling [ 4.158903] +1.8V_RUN_CAM: disabling [ 4.163379] +2.8V_RUN_CAM: disabling [ 4.167016] +1.2V_RUN_CAM_FRONT: disabling [ 4.170632] +1.05V_RUN_CAM_REAR: disabling [ 4.174221] +3.3V_RUN_TOUCH: disabling [ 4.178322] +2.8V_RUN_CAM_AF: disabling [ 4.182441] +1.8V_RUN_VPP_FUSE: disabling [ 4.186206] ALSA device list: [ 4.186210] #0: tegra-hda at 0x70038000 irq 346 [ 4.186212] #1: NVIDIA Tegra Jetson TK1 [ 4.205695] cfg80211: failed to load regulatory.db [ 4.211323] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.256024] EXT4-fs (mmcblk0p1): recovery complete [ 4.261942] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.270105] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.280728] devtmpfs: mounted [ 4.284074] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#