U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 3.5 MiB/s done Bytes transferred = 8118784 (7be200 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7be200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171211-338510-g153e8244ebcb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 11 06:31:23 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39040 r8192 d22400 u69632 [ 0.000000] pcpu-alloc: s39040 r8192 d22400 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993476K/2097148K available (11264K kernel code, 1582K rwdata, 4316K rodata, 2048K init, 404K bss, 38136K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1583 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 405 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001904] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001911] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001918] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001922] Switching to timer-based delay loop, resolution 83ns [ 0.002141] Console: colour dummy device 80x30 [ 0.002157] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002164] pid_max: default: 32768 minimum: 301 [ 0.002209] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002215] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002420] CPU: Testing write buffer coherency: ok [ 0.002552] /cpus/cpu@0 missing clock-frequency property [ 0.002567] /cpus/cpu@1 missing clock-frequency property [ 0.002582] /cpus/cpu@2 missing clock-frequency property [ 0.002597] /cpus/cpu@3 missing clock-frequency property [ 0.002602] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002722] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003445] Hierarchical SRCU implementation. [ 0.004154] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004439] EFI services will not be available. [ 0.004503] smp: Bringing up secondary CPUs ... [ 0.004794] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012178] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022181] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031906] smp: Brought up 1 node, 4 CPUs [ 0.031914] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031917] CPU: All CPU(s) started in SVC mode. [ 0.032471] devtmpfs: initialized [ 0.037680] Built 1 zonelists, mobility grouping on. Total pages: 514753 [ 0.037838] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038068] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038165] pinctrl core: initialized pinctrl subsystem [ 0.038739] DMI not present or invalid. [ 0.038843] NET: Registered protocol family 16 [ 0.039533] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040466] cpuidle: using governor menu [ 0.048782] No ATAGs? [ 0.048836] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048842] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051643] Serial: AMBA PL011 UART driver [ 0.052082] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052196] iommu: Adding device reg-dummy to group 0 [ 0.052225] iommu: Adding device 50000000.host1x to group 1 [ 0.052250] iommu: Adding device 54200000.dc to group 2 [ 0.052281] iommu: Adding device 54240000.dc to group 3 [ 0.052293] iommu: Adding device 54280000.hdmi to group 4 [ 0.052304] iommu: Adding device 54540000.sor to group 5 [ 0.052316] iommu: Adding device 545c0000.dpaux to group 6 [ 0.052341] iommu: Adding device 57000000.gpu to group 7 [ 0.052352] iommu: Adding device 60005000.timer to group 8 [ 0.052363] iommu: Adding device 60007000.flow-controller to group 9 [ 0.052374] iommu: Adding device 6000c800.actmon to group 10 [ 0.052388] iommu: Adding device 6000d000.gpio to group 11 [ 0.052399] iommu: Adding device 60020000.dma to group 12 [ 0.052410] iommu: Adding device 70000800.apbmisc to group 13 [ 0.052423] iommu: Adding device 70000868.pinmux to group 14 [ 0.052433] iommu: Adding device 70006000.serial to group 15 [ 0.052445] iommu: Adding device 7000a000.pwm to group 16 [ 0.052456] iommu: Adding device 7000c000.i2c to group 17 [ 0.052467] iommu: Adding device 7000c400.i2c to group 18 [ 0.052477] iommu: Adding device 7000c500.i2c to group 19 [ 0.052490] iommu: Adding device 7000c700.i2c to group 20 [ 0.052500] iommu: Adding device 7000d000.i2c to group 21 [ 0.052512] iommu: Adding device 7000d400.spi to group 22 [ 0.052523] iommu: Adding device 7000da00.spi to group 23 [ 0.052536] iommu: Adding device 7000e000.rtc to group 24 [ 0.052547] iommu: Adding device 7000e400.pmc to group 25 [ 0.052557] iommu: Adding device 7000f800.fuse to group 26 [ 0.052568] iommu: Adding device 70019000.memory-controller to group 27 [ 0.052580] iommu: Adding device 7001b000.emc to group 28 [ 0.052591] iommu: Adding device 70030000.hda to group 29 [ 0.052603] iommu: Adding device 70090000.usb to group 30 [ 0.052613] iommu: Adding device 7009f000.padctl to group 31 [ 0.052624] iommu: Adding device 700b0000.sdhci to group 32 [ 0.052635] iommu: Adding device 700b0400.sdhci to group 33 [ 0.052646] iommu: Adding device 700b0600.sdhci to group 34 [ 0.052660] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.052672] iommu: Adding device 70300000.ahub to group 36 [ 0.052683] iommu: Adding device pmu to group 37 [ 0.052694] iommu: Adding device timer to group 38 [ 0.052704] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.052715] iommu: Adding device backlight to group 40 [ 0.052725] iommu: Adding device clocks to group 41 [ 0.052736] iommu: Adding device gpio-keys to group 42 [ 0.052747] iommu: Adding device regulators to group 43 [ 0.052758] iommu: Adding device regulators:regulator@0 to group 44 [ 0.052770] iommu: Adding device regulators:regulator@1 to group 45 [ 0.052784] iommu: Adding device regulators:regulator@2 to group 46 [ 0.052796] iommu: Adding device regulators:regulator@3 to group 47 [ 0.052807] iommu: Adding device regulators:regulator@4 to group 48 [ 0.052818] iommu: Adding device regulators:regulator@5 to group 49 [ 0.052828] iommu: Adding device regulators:regulator@6 to group 50 [ 0.052839] iommu: Adding device regulators:regulator@7 to group 51 [ 0.052849] iommu: Adding device regulators:regulator@8 to group 52 [ 0.052862] iommu: Adding device regulators:regulator@9 to group 53 [ 0.052874] iommu: Adding device regulators:regulator@10 to group 54 [ 0.052884] iommu: Adding device regulators:regulator@11 to group 55 [ 0.052898] iommu: Adding device regulators:regulator@12 to group 56 [ 0.052908] iommu: Adding device sound to group 57 [ 0.052919] iommu: Adding device gpio-restart to group 58 [ 0.052929] iommu: Adding device panel to group 59 [ 0.058072] AT91: Could not find identification node [ 0.058280] +5V_SYS: supplied by +VDD_MUX [ 0.058376] +3.3V_SYS: supplied by +VDD_MUX [ 0.058589] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058595] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058629] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058634] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058666] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058671] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058703] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058708] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058794] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058798] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058830] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058835] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059794] vgaarb: loaded [ 0.060056] SCSI subsystem initialized [ 0.060126] libata version 3.00 loaded. [ 0.060201] usbcore: registered new interface driver usbfs [ 0.060218] usbcore: registered new interface driver hub [ 0.060243] usbcore: registered new device driver usb [ 0.061544] pps_core: LinuxPPS API ver. 1 registered [ 0.061549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061558] PTP clock support registered [ 0.061627] EDAC MC: Ver: 3.0.0 [ 0.062043] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062054] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062492] clocksource: Switched to clocksource arch_sys_counter [ 0.080782] NET: Registered protocol family 2 [ 0.080973] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.080984] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.081019] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.081081] TCP: Hash tables configured (established 8192 bind 8192) [ 0.081118] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.081134] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.081192] NET: Registered protocol family 1 [ 0.081371] RPC: Registered named UNIX socket transport module. [ 0.081375] RPC: Registered udp transport module. [ 0.081378] RPC: Registered tcp transport module. [ 0.081381] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.081386] PCI: CLS 0 bytes, default 64 [ 0.081961] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.082249] iommu: Adding device alarmtimer to group 60 [ 0.082595] Initialise system trusted keyrings [ 0.082660] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.084906] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.085128] NFS: Registering the id_resolver key type [ 0.085138] Key type id_resolver registered [ 0.085141] Key type id_legacy registered [ 0.085157] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.085692] Key type asymmetric registered [ 0.085697] Asymmetric key parser 'x509' registered [ 0.085716] bounce: pool size: 64 pages [ 0.085735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.085739] io scheduler noop registered [ 0.085743] io scheduler deadline registered [ 0.085822] io scheduler cfq registered (default) [ 0.085826] io scheduler mq-deadline registered [ 0.085829] io scheduler kyber registered [ 0.087199] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.097894] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.099052] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.115831] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.115875] iommu: Adding device serial8250 to group 61 [ 0.116896] console [ttyS0] disabled [ 0.116915] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.375913] console [ttyS0] enabled [ 1.379700] SuperH (H)SCI(F) driver initialized [ 1.384594] msm_serial: driver initialized [ 1.388739] STMicroelectronics ASC driver initialized [ 1.412217] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.418769] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.426238] panel-simple panel: panel supply power not found, using dummy regulator [ 1.436557] brd: module loaded [ 1.441945] loop: module loaded [ 1.446043] as3722 4-0040: AS3722 with revision 0x1 found [ 1.452549] iommu: Adding device as3722-pinctrl to group 62 [ 1.459443] iommu: Adding device as3722-regulator to group 63 [ 1.467292] as3722-sd2: supplied by +5V_SYS [ 1.471691] as3722-sd3: supplied by +5V_SYS [ 1.476081] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.482244] as3722-sd4: supplied by +5V_SYS [ 1.486582] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.492304] as3722-sd5: supplied by +5V_SYS [ 1.497864] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.503586] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.509580] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.515189] as3722-ldo3: supplied by +3.3V_SYS [ 1.519635] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.527194] as3722-ldo4: supplied by +3.3V_SYS [ 1.531782] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.537791] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.542562] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.549228] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.555245] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.560009] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.566542] as3722-ldo9: supplied by +5V_SYS [ 1.571106] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.577297] as3722-ldo10: supplied by +5V_SYS [ 1.581799] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.588229] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.594721] iommu: Adding device as3722-rtc to group 64 [ 1.600075] iommu: Adding device as3722-adc to group 65 [ 1.605399] iommu: Adding device as3722-power-off to group 66 [ 1.611233] iommu: Adding device as3722-wdt to group 67 [ 1.628150] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.633668] iommu: Adding device Fixed MDIO bus.0 to group 68 [ 1.639546] libphy: Fixed MDIO Bus: probed [ 1.643977] CAN device driver interface [ 1.648106] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.654215] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.660031] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.665957] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.672907] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.679797] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.687200] usbcore: registered new interface driver pegasus [ 1.692864] usbcore: registered new interface driver asix [ 1.698258] usbcore: registered new interface driver ax88179_178a [ 1.704349] usbcore: registered new interface driver cdc_ether [ 1.710182] usbcore: registered new interface driver smsc75xx [ 1.715937] usbcore: registered new interface driver smsc95xx [ 1.721676] usbcore: registered new interface driver net1080 [ 1.727336] usbcore: registered new interface driver cdc_subset [ 1.733254] usbcore: registered new interface driver zaurus [ 1.738826] usbcore: registered new interface driver cdc_ncm [ 1.745161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.751672] ehci-pci: EHCI PCI platform driver [ 1.756120] ehci-platform: EHCI generic platform driver [ 1.761402] ehci-orion: EHCI orion driver [ 1.765460] SPEAr-ehci: EHCI SPEAr driver [ 1.769504] ehci-st: EHCI STMicroelectronics driver [ 1.774420] ehci-exynos: EHCI EXYNOS driver [ 1.778643] ehci-atmel: EHCI Atmel driver [ 1.782691] tegra-ehci: Tegra EHCI driver [ 1.786751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.792926] ohci-pci: OHCI PCI platform driver [ 1.797367] ohci-platform: OHCI generic platform driver [ 1.802648] SPEAr-ohci: OHCI SPEAr driver [ 1.806691] ohci-st: OHCI STMicroelectronics driver [ 1.811602] ohci-atmel: OHCI Atmel driver [ 1.815859] usbcore: registered new interface driver usb-storage [ 1.823225] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.831790] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.838665] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.845618] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.852759] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.859111] i2c /dev entries driver [ 1.864995] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.875318] iommu: Adding device cpufreq-tegra124 to group 69 [ 1.882136] sdhci: Secure Digital Host Controller Interface driver [ 1.888318] sdhci: Copyright(c) Pierre Ossman [ 1.893244] Synopsys Designware Multimedia Card Interface Driver [ 1.899739] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905680] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.919464] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.924346] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.944627] mmc0: Unknown controller version (3). You may experience problems. [ 1.951861] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.988584] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.996739] ledtrig-cpu: registered to indicate activity on CPUs [ 2.002924] usbcore: registered new interface driver usbhid [ 2.008487] usbhid: USB HID core driver [ 2.013815] NET: Registered protocol family 10 [ 2.018587] Segment Routing with IPv6 [ 2.022347] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.028476] NET: Registered protocol family 17 [ 2.032929] can: controller area network core (rev 20170425 abi 9) [ 2.039131] NET: Registered protocol family 29 [ 2.043576] can: raw protocol (rev 20170425) [ 2.047842] can: broadcast manager protocol (rev 20170425 t) [ 2.053502] can: netlink gateway (rev 20170425) max_hops=1 [ 2.059106] Key type dns_resolver registered [ 2.063588] ThumbEE CPU extension supported. [ 2.067856] Registering SWP/SWPB emulation handler [ 2.073061] Loading compiled-in X.509 certificates [ 2.082376] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 2.083921] +3.3V_RUN: supplied by +3.3V_SYS [ 2.084472] +VDD_LED: supplied by +VDD_MUX [ 2.084567] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.084606] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.084642] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.084681] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.084873] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.085120] +5V_USB_HS: supplied by +5V_SYS [ 2.085356] +5V_USB_SS: supplied by +5V_SYS [ 2.086652] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.087812] +3.3V_LP0: supplied by +3.3V_SYS [ 2.088497] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.088751] +5V_HDMI_CON: supplied by +5V_SYS [ 2.089564] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.089619] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.100280] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.101148] panel-simple panel: panel supply power not found, using dummy regulator [ 2.102354] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.110639] mmc1: Unknown controller version (3). You may experience problems. [ 2.110682] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.111026] mmc1: Switching to 3.3V signalling voltage failed [ 2.119240] mmc0: new high speed MMC card at address 0001 [ 2.119576] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.119767] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.119956] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.120252] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0) [ 2.124452] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.135135] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.136183] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.136192] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.142642] mmc2: Unknown controller version (3). You may experience problems. [ 2.142713] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.172739] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.173542] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.174439] panel-simple panel: panel supply power not found, using dummy regulator [ 2.175467] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.176077] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.176682] panel-simple panel: panel supply power not found, using dummy regulator [ 2.178956] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 12:13:48 UTC (946728828) [ 2.179362] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.179371] +1.05V_RUN: disabling [ 2.179566] +1.8V_RUN_CAM: disabling [ 2.179677] +3.3V_RUN_CAM: disabling [ 2.179799] +1.2V_RUN_CAM_FRONT: disabling [ 2.179908] +1.05V_RUN_CAM_REAR: disabling [ 2.180047] +2.8V_RUN_TOUCH: disabling [ 2.180166] +2.8V_RUN_CAM_AF: disabling [ 2.180275] +1.8V_RUN_VPP_FUSE: disabling [ 2.180399] +VDD_LED: disabling [ 2.180401] +5V_VDD_TS_SW: disabling [ 2.180405] +5V_USB_HS: disabling [ 2.180408] +5V_USB_SS: disabling [ 2.180410] +3.3V_PANEL: disabling [ 2.180412] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.180420] +5V_HDMI_CON: disabling [ 2.180623] mmc1: new high speed SDIO card at address 0001 [ 2.324494] mmc2: new high speed SDHC card at address 0007 [ 2.324829] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.333012] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.333018] GPT:3014591 != 15564799 [ 2.333020] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.333021] GPT:3014591 != 15564799 [ 2.333023] GPT: Use GNU Parted to correct GPT errors. [ 2.333051] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.334911] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.335705] panel-simple panel: panel supply power not found, using dummy regulator [ pad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1 [ 2.444823] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.444845] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.445363] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.467804] panel-simple panel: panel supply power not found, using dummy regulator [ 2.633874] EXT4-fs (mmcblk0p3): recovery complete [ 2.639359] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.647491] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.654091] devtmpfs: mounted [ 2.657757] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#