U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.8 MiB/s done Bytes transferred = 6369832 (613228 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x613228 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171211-220269-g153e824 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 11 06:31:38 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 778K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007484] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017012] Switching to timer-based delay loop, resolution 1000ns [ 0.024197] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029236] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039983] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047951] Switching to timer-based delay loop, resolution 83ns [ 0.054430] Console: colour dummy device 80x30 [ 0.058367] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068677] pid_max: default: 32768 minimum: 301 [ 0.073758] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079861] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087714] CPU: Testing write buffer coherency: ok [ 0.092028] /cpus/cpu@0 missing clock-frequency property [ 0.097035] /cpus/cpu@1 missing clock-frequency property [ 0.102343] /cpus/cpu@2 missing clock-frequency property [ 0.107608] /cpus/cpu@3 missing clock-frequency property [ 0.112879] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152994] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157750] Hierarchical SRCU implementation. [ 0.173505] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193015] smp: Bringing up secondary CPUs ... [ 0.243567] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323679] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403798] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413449] smp: Brought up 1 node, 4 CPUs [ 0.432537] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438704] CPU: All CPU(s) started in SVC mode. [ 0.445135] devtmpfs: initialized [ 0.466359] Built 1 zonelists, mobility grouping on. Total pages: 515751 [ 0.471633] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.479201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.488681] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.495070] pinctrl core: initialized pinctrl subsystem [ 0.501211] NET: Registered protocol family 16 [ 0.505676] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.512740] cpuidle: using governor menu [ 0.538217] No ATAGs? [ 0.538353] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.546715] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.554372] iommu: Adding device reg-dummy to group 0 [ 0.557591] iommu: Adding device 1003000.pcie to group 1 [ 0.562884] iommu: Adding device 50000000.host1x to group 2 [ 0.568447] iommu: Adding device 54200000.dc to group 3 [ 0.573628] iommu: Adding device 54240000.dc to group 4 [ 0.578814] iommu: Adding device 54280000.hdmi to group 5 [ 0.584201] iommu: Adding device 57000000.gpu to group 6 [ 0.589473] iommu: Adding device 60005000.timer to group 7 [ 0.594906] iommu: Adding device 60007000.flow-controller to group 8 [ 0.601259] iommu: Adding device 6000c800.actmon to group 9 [ 0.606782] iommu: Adding device 6000d000.gpio to group 10 [ 0.612259] iommu: Adding device 60020000.dma to group 11 [ 0.617617] iommu: Adding device 70000800.apbmisc to group 12 [ 0.623351] iommu: Adding device 70000868.pinmux to group 13 [ 0.628980] iommu: Adding device 70006000.serial to group 14 [ 0.634620] iommu: Adding device 70006040.serial to group 15 [ 0.640233] iommu: Adding device 70006300.serial to group 16 [ 0.645887] iommu: Adding device 7000c000.i2c to group 17 [ 0.651240] iommu: Adding device 7000c400.i2c to group 18 [ 0.656631] iommu: Adding device 7000c500.i2c to group 19 [ 0.661993] iommu: Adding device 7000c700.i2c to group 20 [ 0.667385] iommu: Adding device 7000d000.i2c to group 21 [ 0.672733] iommu: Adding device 7000d400.spi to group 22 [ 0.678126] iommu: Adding device 7000da00.spi to group 23 [ 0.683482] iommu: Adding device 7000e000.rtc to group 24 [ 0.688873] iommu: Adding device 7000e400.pmc to group 25 [ 0.694226] iommu: Adding device 7000f800.fuse to group 26 [ 0.699705] iommu: Adding device 70019000.memory-controller to group 27 [ 0.706275] iommu: Adding device 7001b000.emc to group 28 [ 0.711671] iommu: Adding device 70027000.sata to group 29 [ 0.717106] iommu: Adding device 70030000.hda to group 30 [ 0.722508] iommu: Adding device 70090000.usb to group 31 [ 0.727855] iommu: Adding device 7009f000.padctl to group 32 [ 0.733514] iommu: Adding device 700b0400.sdhci to group 33 [ 0.739033] iommu: Adding device 700b0600.sdhci to group 34 [ 0.744599] iommu: Adding device 70015000.cec to group 35 [ 0.749966] iommu: Adding device 700e2000.thermal-sensor to group 36 [ 0.756302] iommu: Adding device 70110000.clock to group 37 [ 0.761827] iommu: Adding device 70300000.ahub to group 38 [ 0.767306] iommu: Adding device 7d000000.usb to group 39 [ 0.772660] iommu: Adding device 7d000000.usb-phy to group 40 [ 0.778405] iommu: Adding device 7d004000.usb to group 41 [ 0.783755] iommu: Adding device 7d004000.usb-phy to group 42 [ 0.789497] iommu: Adding device 7d008000.usb to group 43 [ 0.794848] iommu: Adding device 7d008000.usb-phy to group 44 [ 0.800584] iommu: Adding device pmu to group 45 [ 0.805161] iommu: Adding device timer to group 46 [ 0.809927] iommu: Adding device clocks to group 47 [ 0.814796] iommu: Adding device gpio-keys to group 48 [ 0.819895] iommu: Adding device regulators to group 49 [ 0.825120] iommu: Adding device regulators:regulator@0 to group 50 [ 0.831333] iommu: Adding device regulators:regulator@1 to group 51 [ 0.837599] iommu: Adding device regulators:regulator@2 to group 52 [ 0.843815] iommu: Adding device regulators:regulator@3 to group 53 [ 0.850072] iommu: Adding device regulators:regulator@4 to group 54 [ 0.856294] iommu: Adding device regulators:regulator@7 to group 55 [ 0.862550] iommu: Adding device regulators:regulator@8 to group 56 [ 0.868781] iommu: Adding device regulators:regulator@10 to group 57 [ 0.875118] iommu: Adding device regulators:regulator@11 to group 58 [ 0.881426] iommu: Adding device regulators:regulator@12 to group 59 [ 0.887772] iommu: Adding device regulators:regulator@13 to group 60 [ 0.894080] iommu: Adding device regulators:regulator@14 to group 61 [ 0.900424] iommu: Adding device sound to group 62 [ 0.922052] +5V_SYS: supplied by +VDD_MUX [ 0.924540] +3.3V_SYS: supplied by +VDD_MUX [ 0.929105] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.934425] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.942548] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.948271] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.956501] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.963291] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.971490] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.977309] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.985531] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.991084] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.999308] +12V_SATA: Failed to request enable GPIO242: -517 [ 1.004948] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 1.014386] vgaarb: loaded [ 1.016544] SCSI subsystem initialized [ 1.019730] libata version 3.00 loaded. [ 1.023628] usbcore: registered new interface driver usbfs [ 1.028851] usbcore: registered new interface driver hub [ 1.034146] usbcore: registered new device driver usb [ 1.042358] Linux video capture interface: v2.00 [ 1.045139] pps_core: LinuxPPS API ver. 1 registered [ 1.050030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.059142] PTP clock support registered [ 1.064448] Advanced Linux Sound Architecture Driver Initialized. [ 1.069744] Bluetooth: Core ver 2.22 [ 1.072675] NET: Registered protocol family 31 [ 1.077064] Bluetooth: HCI device and connection manager initialized [ 1.083377] Bluetooth: HCI socket layer initialized [ 1.088243] Bluetooth: L2CAP socket layer initialized [ 1.093284] Bluetooth: SCO socket layer initialized [ 1.098737] clocksource: Switched to clocksource arch_sys_counter [ 1.195564] NET: Registered protocol family 2 [ 1.199018] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.205701] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.212784] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.219271] TCP: Hash tables configured (established 8192 bind 8192) [ 1.225885] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.231355] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.237937] NET: Registered protocol family 1 [ 1.242699] RPC: Registered named UNIX socket transport module. [ 1.247845] RPC: Registered udp transport module. [ 1.252554] RPC: Registered tcp transport module. [ 1.257204] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.264086] iommu: Adding device regulatory.0 to group 63 [ 1.269265] PCI: CLS 0 bytes, default 64 [ 1.274726] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.281742] iommu: Adding device alarmtimer to group 64 [ 1.287370] Initialise system trusted keyrings [ 1.290860] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.298429] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.303708] NFS: Registering the id_resolver key type [ 1.307918] Key type id_resolver registered [ 1.312097] Key type id_legacy registered [ 1.321211] Key type asymmetric registered [ 1.323398] Asymmetric key parser 'x509' registered [ 1.328389] bounce: pool size: 64 pages [ 1.332156] io scheduler noop registered (default) [ 1.336831] io scheduler mq-deadline registered [ 1.341355] io scheduler kyber registered [ 1.347170] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.352155] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.359118] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.374982] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.378687] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.388590] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.399361] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.406313] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.411883] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.417705] iommu: Adding device serial8250 to group 65 [ 1.424622] console [ttyS0] disabled [ 1.426378] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.435330] console [ttyS0] enabled [ 1.435330] console [ttyS0] enabled [ 1.441899] bootconsole [earlycon0] disabled [ 1.441899] bootconsole [earlycon0] disabled [ 1.450899] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.461945] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.490530] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.510103] loop: module loaded [ 1.514659] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.522114] as3722 4-0040: AS3722 with revision 0x1 found [ 1.529739] iommu: Adding device as3722-pinctrl to group 66 [ 1.536997] iommu: Adding device as3722-regulator to group 67 [ 1.545674] as3722-sd2: supplied by +5V_SYS [ 1.550353] as3722-sd3: supplied by +5V_SYS [ 1.554766] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.561160] as3722-sd4: supplied by +5V_SYS [ 1.565824] as3722-sd5: supplied by +5V_SYS [ 1.571928] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.578010] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.584270] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.590231] as3722-ldo3: supplied by +3.3V_SYS [ 1.594731] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.602554] as3722-ldo4: supplied by +3.3V_SYS [ 1.607227] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.613486] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.618327] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.625304] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.630979] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.637158] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.647375] iommu: Adding device as3722-rtc to group 68 [ 1.652788] iommu: Adding device as3722-adc to group 69 [ 1.658160] iommu: Adding device as3722-power-off to group 70 [ 1.664083] iommu: Adding device as3722-wdt to group 71 [ 1.670087] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.688768] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.695469] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.701428] libphy: Fixed MDIO Bus: probed [ 1.705522] CAN device driver interface [ 1.709433] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.716383] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.722117] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.729588] usbcore: registered new interface driver pegasus [ 1.735304] usbcore: registered new interface driver asix [ 1.740794] usbcore: registered new interface driver ax88179_178a [ 1.746931] usbcore: registered new interface driver cdc_ether [ 1.752846] usbcore: registered new interface driver smsc75xx [ 1.758648] usbcore: registered new interface driver smsc95xx [ 1.764462] usbcore: registered new interface driver net1080 [ 1.770195] usbcore: registered new interface driver cdc_subset [ 1.776160] usbcore: registered new interface driver zaurus [ 1.781821] usbcore: registered new interface driver cdc_ncm [ 1.787716] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.793367] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.799090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.805608] ehci-pci: EHCI PCI platform driver [ 1.810124] tegra-ehci: Tegra EHCI driver [ 1.816970] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.822411] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.830238] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.858772] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.865605] hub 1-0:1.0: USB hub found [ 1.869416] hub 1-0:1.0: 1 port detected [ 1.874582] usbcore: registered new interface driver cdc_acm [ 1.880255] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.888313] usbcore: registered new interface driver cdc_wdm [ 1.894070] usbcore: registered new interface driver usb-storage [ 1.901699] iommu: Adding device ci_hdrc.0 to group 73 [ 1.913676] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.920575] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.928403] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.935606] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.942142] i2c /dev entries driver [ 1.946883] usbcore: registered new interface driver uvcvideo [ 1.952644] USB Video Class driver (1.1.1) [ 1.956735] gspca_main: v2.14.0 registered [ 1.961494] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.971775] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.980281] iommu: Adding device cpufreq-tegra124 to group 74 [ 1.986583] sdhci: Secure Digital Host Controller Interface driver [ 1.992777] sdhci: Copyright(c) Pierre Ossman [ 1.997127] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.003126] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.008016] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.029316] mmc0: Unknown controller version (3). You may experience problems. [ 2.036574] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.073725] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.082142] usbcore: registered new interface driver usbhid [ 2.087750] usbhid: USB HID core driver [ 2.094051] iommu: Adding device snd-soc-dummy to group 75 [ 2.137049] mmc0: new high speed MMC card at address 0001 [ 2.147728] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.157378] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.168465] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.174641] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 2.183789] mmcblk0: p1 [ 2.539264] iommu: Adding device 70301100.i2s to group 76 [ 2.545562] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.565897] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.576710] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.587955] NET: Registered protocol family 10 [ 2.593840] Segment Routing with IPv6 [ 2.597682] mip6: Mobile IPv6 [ 2.600672] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.608071] NET: Registered protocol family 17 [ 2.612592] NET: Registered protocol family 15 [ 2.617044] can: controller area network core (rev 20170425 abi 9) [ 2.623452] NET: Registered protocol family 29 [ 2.627891] can: raw protocol (rev 20170425) [ 2.632176] can: broadcast manager protocol (rev 20170425 t) [ 2.637834] can: netlink gateway (rev 20170425) max_hops=1 [ 2.643572] Bluetooth: RFCOMM socket layer initialized [ 2.648721] Bluetooth: RFCOMM ver 1.11 [ 2.652496] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.657807] Bluetooth: BNEP socket layer initialized [ 2.662787] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.668704] Bluetooth: HIDP socket layer initialized [ 2.673947] Key type dns_resolver registered [ 2.678716] Registering SWP/SWPB emulation handler [ 2.684342] Loading compiled-in X.509 certificates [ 2.706809] +3.3V_RUN: supplied by +3.3V_SYS [ 2.712022] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.716718] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.722749] +5V_USB_HS: supplied by +5V_SYS [ 2.727850] +3.3V_LP0: supplied by +3.3V_SYS [ 2.733208] +5V_HDMI_CON: supplied by +5V_SYS [ 2.737981] +5V_SATA: supplied by +5V_SYS [ 2.742666] +12V_SATA: supplied by +VDD_MUX [ 2.748278] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.755141] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.762330] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.769864] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.775474] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.784599] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.793971] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.802360] as3722-sd2: supplied by +5V_SYS [ 2.806855] as3722-sd3: supplied by +5V_SYS [ 2.811548] as3722-sd4: supplied by +5V_SYS [ 2.816068] as3722-sd5: supplied by +5V_SYS [ 2.821844] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.827296] as3722-ldo1: supplied by +3.3V_RUN [ 2.832250] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.837873] as3722-ldo3: supplied by +3.3V_SYS [ 2.843704] as3722-ldo4: supplied by +3.3V_SYS [ 2.848459] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.854362] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.862971] as3722-ldo6: supplied by +3.3V_RUN [ 2.867971] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.873386] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.880498] as3722-ldo9: supplied by +5V_SYS [ 2.885964] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.892722] as3722-ldo10: supplied by +5V_SYS [ 2.897839] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.904697] as3722-ldo11: supplied by +3.3V_RUN [ 2.910016] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.919249] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.928291] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.939072] scsi host0: tegra-ahci [ 2.943715] scsi host1: tegra-ahci [ 2.947428] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.955473] ata2: DUMMY [ 2.959291] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.964728] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.972613] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 2.998870] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.005992] hub 2-0:1.0: USB hub found [ 3.009868] hub 2-0:1.0: 1 port detected [ 3.079542] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.086967] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.092413] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 3.102537] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.111220] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 3.118349] hub 3-0:1.0: USB hub found [ 3.122242] hub 3-0:1.0: 6 ports detected [ 3.127119] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.132595] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 3.140363] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.149913] hub 4-0:1.0: USB hub found [ 3.153719] hub 4-0:1.0: 2 ports detected [ 3.159836] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.164730] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.177971] mmc1: Unknown controller version (3). You may experience problems. [ 3.185335] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.222023] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.229787] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 3.237502] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 3.245348] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 3.270089] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 3.278407] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 3.291823] ata1: SATA link down (SStatus 0 SControl 300) [ 3.292422] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 3.292432] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.292440] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.292449] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.292459] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.292521] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.292542] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.292555] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.292601] pci 0000:00:01.0: enabling Extended Tags [ 3.292612] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.292650] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.292703] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.292714] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.293040] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.293058] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.293070] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.293115] pci 0000:00:02.0: enabling Extended Tags [ 3.293126] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.293163] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.293216] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.293227] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.293562] PCI: bus0: Fast back to back transfers disabled [ 3.293574] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.293594] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.293834] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.293896] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.294218] PCI: bus1: Fast back to back transfers disabled [ 3.294228] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.294470] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.294510] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.294554] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.294585] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.294824] PCI: bus2: Fast back to back transfers disabled [ 3.294835] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.294883] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.294893] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.294903] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.294911] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.294925] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.294957] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.294971] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.294995] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.295022] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.295047] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.295061] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.295070] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.295083] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.295093] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.295136] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.295291] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.295635] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.295882] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.296010] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.296345] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.296861] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.296915] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.296980] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.330572] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x61e8bdf0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.330581] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.335156] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.356607] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.356612] [drm] No driver support for vblank timestamp query. [ 3.356675] [drm] Cannot find any crtc or sizes [ 3.356782] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.357824] iommu: Adding device cpufreq-dt.0 to group 77 [ 3.358211] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.358253] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.358946] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 3.369874] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814) [ 3.370005] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.372099] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.372230] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.372233] cfg80211: failed to load regulatory.db [ 3.372488] +USB0_VBUS_SW: disabling [ 3.372501] +1.8V_RUN_CAM: disabling [ 3.372752] +2.8V_RUN_CAM: disabling [ 3.372905] +1.2V_RUN_CAM_FRONT: disabling [ 3.373068] +1.05V_RUN_CAM_REAR: disabling [ 3.373183] +3.3V_RUN_TOUCH: disabling [ 3.373344] +2.8V_RUN_CAM_AF: disabling [ 3.373458] +1.8V_RUN_VPP_FUSE: disabling [ 3.373629] ALSA device list: [ 3.373632] #0: tegra-hda at 0x70038000 irq 346 [ 3.373633] #1: NVIDIA Tegra Jetson TK1 [ 3.475467] mmc1: new high speed SDHC card at address aaaa [ 3.477351] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.492414] mmcblk1: p1 p2 p3 [ 3.502395] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.872289] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.909683] EXT4-fs (mmcblk0p1): recovery complete [ 3.910552] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.910632] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.915666] devtmpfs: mounted [ 3.916110] Freeing unused kernel memory: 1024K [ 3.967036] Console: switching to colour frame buffer device 512x135 [ 4.100576] drm drm: fb0: frame buffer device bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#