U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.6 MiB/s done Bytes transferred = 6368864 (612e60 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x612e60 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171207-219543-ge40fd8d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Dec 7 01:31:04 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 777K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 778 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008020] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017552] Switching to timer-based delay loop, resolution 1000ns [ 0.024069] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029773] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040520] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048491] Switching to timer-based delay loop, resolution 83ns [ 0.054666] Console: colour dummy device 80x30 [ 0.058899] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080391] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087736] CPU: Testing write buffer coherency: ok [ 0.092401] /cpus/cpu@0 missing clock-frequency property [ 0.097554] /cpus/cpu@1 missing clock-frequency property [ 0.102850] /cpus/cpu@2 missing clock-frequency property [ 0.108128] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153456] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158112] Hierarchical SRCU implementation. [ 0.173661] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193458] smp: Bringing up secondary CPUs ... [ 0.243705] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323733] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403776] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413607] smp: Brought up 1 node, 4 CPUs [ 0.432685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438844] CPU: All CPU(s) started in SVC mode. [ 0.444127] devtmpfs: initialized [ 0.453064] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.458969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.468601] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.475283] pinctrl core: initialized pinctrl subsystem [ 0.480416] NET: Registered protocol family 16 [ 0.484916] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.491664] cpuidle: using governor menu [ 0.502655] No ATAGs? [ 0.502714] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.511054] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.517731] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.525401] iommu: Adding device reg-dummy to group 0 [ 0.530312] iommu: Adding device 50000000.host1x to group 1 [ 0.535865] iommu: Adding device 54200000.dc to group 2 [ 0.541054] iommu: Adding device 54240000.dc to group 3 [ 0.546249] iommu: Adding device 54280000.hdmi to group 4 [ 0.551617] iommu: Adding device 54540000.sor to group 5 [ 0.556908] iommu: Adding device 545c0000.dpaux to group 6 [ 0.562377] iommu: Adding device 57000000.gpu to group 7 [ 0.567655] iommu: Adding device 60005000.timer to group 8 [ 0.573108] iommu: Adding device 60007000.flow-controller to group 9 [ 0.579441] iommu: Adding device 6000c800.actmon to group 10 [ 0.585070] iommu: Adding device 6000d000.gpio to group 11 [ 0.590537] iommu: Adding device 60020000.dma to group 12 [ 0.595901] iommu: Adding device 70000800.apbmisc to group 13 [ 0.601628] iommu: Adding device 70000868.pinmux to group 14 [ 0.607254] iommu: Adding device 70006000.serial to group 15 [ 0.612894] iommu: Adding device 7000a000.pwm to group 16 [ 0.618264] iommu: Adding device 7000c000.i2c to group 17 [ 0.623641] iommu: Adding device 7000c400.i2c to group 18 [ 0.629010] iommu: Adding device 7000c500.i2c to group 19 [ 0.634388] iommu: Adding device 7000c700.i2c to group 20 [ 0.639754] iommu: Adding device 7000d000.i2c to group 21 [ 0.645137] iommu: Adding device 7000d400.spi to group 22 [ 0.650501] iommu: Adding device 7000da00.spi to group 23 [ 0.655881] iommu: Adding device 7000e000.rtc to group 24 [ 0.661248] iommu: Adding device 7000e400.pmc to group 25 [ 0.666630] iommu: Adding device 7000f800.fuse to group 26 [ 0.672081] iommu: Adding device 70019000.memory-controller to group 27 [ 0.678676] iommu: Adding device 7001b000.emc to group 28 [ 0.684042] iommu: Adding device 70030000.hda to group 29 [ 0.689422] iommu: Adding device 70090000.usb to group 30 [ 0.694788] iommu: Adding device 7009f000.padctl to group 31 [ 0.700428] iommu: Adding device 700b0000.sdhci to group 32 [ 0.705968] iommu: Adding device 700b0400.sdhci to group 33 [ 0.711525] iommu: Adding device 700b0600.sdhci to group 34 [ 0.717062] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.723394] iommu: Adding device 70300000.ahub to group 36 [ 0.728849] iommu: Adding device pmu to group 37 [ 0.733453] iommu: Adding device timer to group 38 [ 0.738207] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.743674] iommu: Adding device backlight to group 40 [ 0.748783] iommu: Adding device clocks to group 41 [ 0.753634] iommu: Adding device gpio-keys to group 42 [ 0.758754] iommu: Adding device regulators to group 43 [ 0.763947] iommu: Adding device regulators:regulator@0 to group 44 [ 0.770193] iommu: Adding device regulators:regulator@1 to group 45 [ 0.776427] iommu: Adding device regulators:regulator@2 to group 46 [ 0.782674] iommu: Adding device regulators:regulator@3 to group 47 [ 0.788910] iommu: Adding device regulators:regulator@4 to group 48 [ 0.795158] iommu: Adding device regulators:regulator@5 to group 49 [ 0.801388] iommu: Adding device regulators:regulator@6 to group 50 [ 0.807634] iommu: Adding device regulators:regulator@7 to group 51 [ 0.813868] iommu: Adding device regulators:regulator@8 to group 52 [ 0.820117] iommu: Adding device regulators:regulator@9 to group 53 [ 0.826348] iommu: Adding device regulators:regulator@10 to group 54 [ 0.832683] iommu: Adding device regulators:regulator@11 to group 55 [ 0.839001] iommu: Adding device regulators:regulator@12 to group 56 [ 0.845334] iommu: Adding device sound to group 57 [ 0.850095] iommu: Adding device gpio-restart to group 58 [ 0.855473] iommu: Adding device panel to group 59 [ 0.865945] +5V_SYS: supplied by +VDD_MUX [ 0.868172] +3.3V_SYS: supplied by +VDD_MUX [ 0.872469] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.877841] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.885927] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.891890] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.899967] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.905747] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.913832] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.919612] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.927757] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.934606] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.942778] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.948644] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.957216] vgaarb: loaded [ 0.959747] SCSI subsystem initialized [ 0.963289] libata version 3.00 loaded. [ 0.967127] usbcore: registered new interface driver usbfs [ 0.972499] usbcore: registered new interface driver hub [ 0.977792] usbcore: registered new device driver usb [ 0.984034] Linux video capture interface: v2.00 [ 0.987402] pps_core: LinuxPPS API ver. 1 registered [ 0.992316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.001436] PTP clock support registered [ 1.005460] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 1.012696] tegra-emc: probe of 7001b000.emc failed with error -2 [ 1.018852] Advanced Linux Sound Architecture Driver Initialized. [ 1.025070] Bluetooth: Core ver 2.22 [ 1.028387] NET: Registered protocol family 31 [ 1.032789] Bluetooth: HCI device and connection manager initialized [ 1.039127] Bluetooth: HCI socket layer initialized [ 1.043971] Bluetooth: L2CAP socket layer initialized [ 1.049012] Bluetooth: SCO socket layer initialized [ 1.054106] clocksource: Switched to clocksource arch_sys_counter [ 1.091320] NET: Registered protocol family 2 [ 1.094148] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.101409] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.108451] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.114887] TCP: Hash tables configured (established 8192 bind 8192) [ 1.121324] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.127063] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.133487] NET: Registered protocol family 1 [ 1.137995] RPC: Registered named UNIX socket transport module. [ 1.143593] RPC: Registered udp transport module. [ 1.148283] RPC: Registered tcp transport module. [ 1.152953] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.159540] iommu: Adding device regulatory.0 to group 60 [ 1.164831] PCI: CLS 0 bytes, default 64 [ 1.169339] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.177059] iommu: Adding device alarmtimer to group 61 [ 1.182383] Initialise system trusted keyrings [ 1.186495] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.193304] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.198921] NFS: Registering the id_resolver key type [ 1.203662] Key type id_resolver registered [ 1.207825] Key type id_legacy registered [ 1.213528] Key type asymmetric registered [ 1.215883] Asymmetric key parser 'x509' registered [ 1.220779] bounce: pool size: 64 pages [ 1.224568] io scheduler noop registered (default) [ 1.229307] io scheduler mq-deadline registered [ 1.233814] io scheduler kyber registered [ 1.238449] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.250835] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.256916] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 1.265714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.271866] iommu: Adding device serial8250 to group 62 [ 1.277701] console [ttyS0] disabled [ 1.280590] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.289527] console [ttyS0] enabled [ 1.289527] console [ttyS0] enabled [ 1.295751] bootconsole [earlycon0] disabled [ 1.295751] bootconsole [earlycon0] disabled [ 1.321798] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.328348] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.335811] panel-simple panel: panel supply power not found, using dummy regulator [ 1.347083] loop: module loaded [ 1.350777] as3722 4-0040: AS3722 with revision 0x1 found [ 1.357384] iommu: Adding device as3722-pinctrl to group 63 [ 1.364319] iommu: Adding device as3722-regulator to group 64 [ 1.372147] as3722-sd2: supplied by +5V_SYS [ 1.376588] as3722-sd3: supplied by +5V_SYS [ 1.380927] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.387118] as3722-sd4: supplied by +5V_SYS [ 1.391454] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.397207] as3722-sd5: supplied by +5V_SYS [ 1.402807] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.408553] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.414576] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.420209] as3722-ldo3: supplied by +3.3V_SYS [ 1.424672] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.432242] as3722-ldo4: supplied by +3.3V_SYS [ 1.436849] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.442864] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.447643] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.454347] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.460372] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.465155] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.471706] as3722-ldo9: supplied by +5V_SYS [ 1.476284] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.482485] as3722-ldo10: supplied by +5V_SYS [ 1.487009] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.493446] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.499970] iommu: Adding device as3722-rtc to group 65 [ 1.505250] iommu: Adding device as3722-adc to group 66 [ 1.510515] iommu: Adding device as3722-power-off to group 67 [ 1.516308] iommu: Adding device as3722-wdt to group 68 [ 1.534374] iommu: Adding device cros-ec-ctl.0.auto to group 69 [ 1.540353] iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70 [ 1.547682] iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71 [ 1.558584] cros-ec-spi spi0.0: Chrome EC device registered [ 1.573427] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.588897] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.594707] libphy: Fixed MDIO Bus: probed [ 1.598790] CAN device driver interface [ 1.602635] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.609584] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.615195] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.622598] usbcore: registered new interface driver pegasus [ 1.628276] usbcore: registered new interface driver asix [ 1.633677] usbcore: registered new interface driver ax88179_178a [ 1.639784] usbcore: registered new interface driver cdc_ether [ 1.645631] usbcore: registered new interface driver smsc75xx [ 1.651383] usbcore: registered new interface driver smsc95xx [ 1.657140] usbcore: registered new interface driver net1080 [ 1.662800] usbcore: registered new interface driver cdc_subset [ 1.668728] usbcore: registered new interface driver zaurus [ 1.674317] usbcore: registered new interface driver cdc_ncm [ 1.680050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.686567] ehci-pci: EHCI PCI platform driver [ 1.691017] tegra-ehci: Tegra EHCI driver [ 1.695288] usbcore: registered new interface driver cdc_acm [ 1.700931] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.708942] usbcore: registered new interface driver cdc_wdm [ 1.714615] usbcore: registered new interface driver usb-storage [ 1.721270] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.740769] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.747636] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.754403] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.761539] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.767822] i2c /dev entries driver [ 1.771722] usbcore: registered new interface driver uvcvideo [ 1.777462] USB Video Class driver (1.1.1) [ 1.781546] gspca_main: v2.14.0 registered [ 1.785868] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.794517] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.802540] iommu: Adding device cpufreq-tegra124 to group 73 [ 1.808606] sdhci: Secure Digital Host Controller Interface driver [ 1.814783] sdhci: Copyright(c) Pierre Ossman [ 1.819128] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.824900] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.838242] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.843112] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.862242] mmc0: Unknown controller version (3). You may experience problems. [ 1.869482] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.906258] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.913969] usbcore: registered new interface driver usbhid [ 1.919651] usbhid: USB HID core driver [ 1.924353] iommu: Adding device snd-soc-dummy to group 74 [ 1.930993] iommu: Adding device 70301100.i2s to group 75 [ 1.936938] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.983833] mmc0: new high speed MMC card at address 0001 [ 1.991048] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.996100] max98090 0-0010: MAX98090 REVID=0x43 [ 2.002069] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.009747] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.015801] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 2.024367] max98090 0-0010: use default 2.8v micbias [ 2.026130] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.037489] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 2.045000] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 2.052932] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 2.061155] NET: Registered protocol family 10 [ 2.066114] Segment Routing with IPv6 [ 2.069829] mip6: Mobile IPv6 [ 2.072787] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.079231] NET: Registered protocol family 17 [ 2.083669] NET: Registered protocol family 15 [ 2.088107] can: controller area network core (rev 20170425 abi 9) [ 2.094354] NET: Registered protocol family 29 [ 2.098784] can: raw protocol (rev 20170425) [ 2.103040] can: broadcast manager protocol (rev 20170425 t) [ 2.108696] can: netlink gateway (rev 20170425) max_hops=1 [ 2.114248] Bluetooth: RFCOMM socket layer initialized [ 2.119382] Bluetooth: RFCOMM ver 1.11 [ 2.123123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.128433] Bluetooth: BNEP socket layer initialized [ 2.133383] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.139294] Bluetooth: HIDP socket layer initialized [ 2.144345] Key type dns_resolver registered [ 2.148789] Registering SWP/SWPB emulation handler [ 2.153849] Loading compiled-in X.509 certificates [ 2.165004] +3.3V_RUN: supplied by +3.3V_SYS [ 2.169902] +VDD_LED: supplied by +VDD_MUX [ 2.174097] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.179832] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.184570] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.189213] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.194462] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.199075] +5V_USB_HS: supplied by +5V_SYS [ 2.203392] +5V_USB_SS: supplied by +5V_SYS [ 2.208729] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.214221] +3.3V_LP0: supplied by +3.3V_SYS [ 2.218962] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.224909] +5V_HDMI_CON: supplied by +5V_SYS [ 2.229856] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.236683] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.245928] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.252087] panel-simple panel: panel supply power not found, using dummy regulator [ 2.324868] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.332265] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.337686] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 2.347262] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.355917] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 2.362469] hub 1-0:1.0: USB hub found [ 2.366288] hub 1-0:1.0: 6 ports detected [ 2.370654] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.376081] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 2.383762] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.392430] hub 2-0:1.0: USB hub found [ 2.396241] hub 2-0:1.0: 2 ports detected [ 2.401283] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.414397] mmc1: Unknown controller version (3). You may experience problems. [ 2.421655] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.428120] mmc1: Switching to 3.3V signalling voltage failed [ 2.456866] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.464512] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.469385] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.479636] mmc2: Unknown controller version (3). You may experience problems. [ 2.486973] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.523195] mmc1: new high speed SDIO card at address 0001 [ 2.529037] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.536615] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.542773] panel-simple panel: panel supply power not found, using dummy regulator [ 2.550878] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.557818] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.564036] panel-simple panel: panel supply power not found, using dummy regulator [ 2.571699] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 17:00:13 UTC (946746013) [ 2.571849] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.573579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.573702] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.573706] cfg80211: failed to load regulatory.db [ 2.573999] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.574011] +1.8V_RUN_CAM: disabling [ 2.574183] +1.2V_RUN_CAM_FRONT: disabling [ 2.574432] +1.05V_RUN_CAM_REAR: disabling [ 2.574675] +2.8V_RUN_TOUCH: disabling [ 2.574916] +2.8V_RUN_CAM_AF: disabling [ 2.575153] +1.8V_RUN_VPP_FUSE: disabling [ 2.575394] +VDD_LED: disabling [ 2.575398] +5V_VDD_TS_SW: disabling [ 2.575405] +3.3V_PANEL: disabling [ 2.575408] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.575410] +5V_HDMI_CON: disabling [ 2.575413] ALSA device list: [ 2.575416] #1: GoogleNyanBig [ 2.704610] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.710827] panel-simple panel: panel supply power not found, using dummy regulator [ 2.719043] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.728523] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.785955] mmc2: new high speed SDHC card at address 0007 [ 2.793291] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.804154] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.813461] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.819649] GPT:3014591 != 15564799 [ 2.823125] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.830507] GPT:3014591 != 15564799 [ 2.833983] GPT: Use GNU Parted to correct GPT errors. [ 2.839134] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.847068] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.853229] panel-simple panel: panel supply power not found, using dummy regulator [ 2.935569] EXT4-fs (mmcblk0p3): recovery complete [ 2.940928] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.949048] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.955710] devtmpfs: mounted [ 2.959150] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.126673] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 3.141551] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 3.151243] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.157429] panel-simple panel: panel supply power not found, using dummy regulator [ 3.494196] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 4.153147] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 4.164161] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.170319] panel-simple panel: panel supply power not found, using dummy regulator [ 4.504197] usb 1-1: new high-speed USB device number 4 using tegra-xusb mount -t debugfs none /sys/kernel/debug [ 4.692359] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.699231] scsi host0: usb-storage 1-1:1.0 [ 4.703823] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.710604] panel-simple panel: panel supply power not found, using dummy regulator root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.739202] PM: suspend entry (deep) [ 5.742770] PM: Syncing filesystems ... done. [ 5.748638] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.756894] OOM killer disabled. [ 5.760130] Freezing remaining freezable tasks ... [ 5.760295] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.773779] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.779951] panel-simple panel: panel supply power not found, using dummy regulator [ 5.965890] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.973577] (elapsed 0.213 seconds) done. [ 5.977666] Suspending console(s) (use no_console_suspend to debug) [ 5.984473] sd 0:0:0:0: [sda] Write Protect is off [ 5.984478] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.985241] sd 0:0:0:0: [sda] No Caching mode page found [ 5.985244] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.006157] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 6.010776] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.197703] Disabling non-boot CPUs ... [ 6.364921] Entering suspend state LP1 [ 6.364947] Enabling non-boot CPUs ... [ 6.365631] CPU1 is up [ 6.366239] CPU2 is up [ 6.366877] CPU3 is up [ 6.407873] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.420086] mmc1: Switching to 3.3V signalling voltage failed [ 6.634714] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 6.959109] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.959328] panel-simple panel: panel supply power not found, using dummy regulator [ 7.034325] OOM killer enabled. [ 7.037453] Restarting tasks ... done. [ 7.042059] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 8.043495] PM: suspend entry (deep) [ 8.047081] PM: Syncing filesystems ... done. [ 8.052779] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.060946] OOM killer disabled. [ 8.064167] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.072764] Suspending console(s) (use no_console_suspend to debug) [ 8.257844] Disabling non-boot CPUs ... [ 8.374254] IRQ17 no longer affine to CPU2 [ 8.444853] Entering suspend state LP1 [ 8.444877] Enabling non-boot CPUs ... [ 8.445600] CPU1 is up [ 8.446217] CPU2 is up [ 8.446872] CPU3 is up [ 8.488178] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.500577] mmc1: Switching to 3.3V signalling voltage failed [ 8.714578] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 9.029046] tegra-sor 54540000.sor: failed to probe output: -517 [ 9.029210] panel-simple panel: panel supply power not found, using dummy regulator [ 9.083535] OOM killer enabled. [ 9.086670] Restarting tasks ... done. [ 9.091066] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 10.123408] PM: suspend entry (deep) [ 10.126994] PM: Syncing filesystems ... done. [ 10.132677] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.140760] OOM killer disabled. [ 10.143976] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.152563] Suspending console(s) (use no_console_suspend to debug) [ 10.347238] Disabling non-boot CPUs ... [ 10.454231] IRQ17 no longer affine to CPU2 [ 10.524807] Entering suspend state LP1 [ 10.524833] Enabling non-boot CPUs ... [ 10.525569] CPU1 is up [ 10.526185] CPU2 is up [ 10.526846] CPU3 is up [ 10.568597] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.581013] mmc1: Switching to 3.3V signalling voltage failed [ 10.794556] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.614730] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.614892] panel-simple panel: panel supply power not found, using dummy regulator [ 11.669266] OOM killer enabled. [ 11.672406] Restarting tasks ... done. [ 11.676817] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.202822] PM: suspend entry (deep) [ 12.206425] PM: Syncing filesystems ... done. [ 12.212109] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.220302] OOM killer disabled. [ 12.223523] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.232166] Suspending console(s) (use no_console_suspend to debug) [ 12.417300] Disabling non-boot CPUs ... [ 12.594793] Entering suspend state LP1 [ 12.594818] Enabling non-boot CPUs ... [ 12.595558] CPU1 is up [ 12.596175] CPU2 is up [ 12.596832] CPU3 is up [ 12.638063] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.650325] mmc1: Switching to 3.3V signalling voltage failed [ 13.179722] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.179886] panel-simple panel: panel supply power not found, using dummy regulator [ 13.223255] OOM killer enabled. [ 13.226397] Restarting tasks ... done. [ 13.230603] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.274048] PM: suspend entry (deep) [ 14.277623] PM: Syncing filesystems ... done. [ 14.283372] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.291548] OOM killer disabled. [ 14.294783] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.303275] Suspending console(s) (use no_console_suspend to debug) [ 14.487223] Disabling non-boot CPUs ... [ 14.634708] Entering suspend state LP1 [ 14.634734] Enabling non-boot CPUs ... [ 14.635476] CPU1 is up [ 14.636091] CPU2 is up [ 14.636754] CPU3 is up [ 14.678033] cros-ec-spi spi0.0: spi transfer failed: -121 [ 14.690324] mmc1: Switching to 3.3V signalling voltage failed [ 14.904507] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.218497] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.218663] panel-simple panel: panel supply power not found, using dummy regulator [ 15.269004] OOM killer enabled. [ 15.272145] Restarting tasks ... done. [ 15.276449] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.312222] PM: suspend entry (deep) [ 16.315807] PM: Syncing filesystems ... done. [ 16.321287] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.329467] OOM killer disabled. [ 16.332683] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.341284] Suspending console(s) (use no_console_suspend to debug) [ 16.527432] Disabling non-boot CPUs ... [ 16.604182] IRQ17 no longer affine to CPU1 [ 16.714664] Entering suspend state LP1 [ 16.714689] Enabling non-boot CPUs ... [ 16.715433] CPU1 is up [ 16.716053] CPU2 is up [ 16.716714] CPU3 is up [ 16.757894] cros-ec-spi spi0.0: spi transfer failed: -121 [ 16.770117] mmc1: Switching to 3.3V signalling voltage failed [ 16.984483] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.298976] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.299141] panel-simple panel: panel supply power not found, using dummy regulator [ 17.353576] OOM killer enabled. [ 17.356732] Restarting tasks ... done. [ 17.361023] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.391895] PM: suspend entry (deep) [ 18.395477] PM: Syncing filesystems ... done. [ 18.400938] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.409020] OOM killer disabled. [ 18.412236] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.420831] Suspending console(s) (use no_console_suspend to debug) [ 18.607571] Disabling non-boot CPUs ... [ 18.784625] Entering suspend state LP1 [ 18.784650] Enabling non-boot CPUs ... [ 18.785395] CPU1 is up [ 18.786012] CPU2 is up [ 18.786672] CPU3 is up [ 18.827876] cros-ec-spi spi0.0: spi transfer failed: -121 [ 18.840001] mmc1: Switching to 3.3V signalling voltage failed [ 19.369056] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.369220] panel-simple panel: panel supply power not found, using dummy regulator [ 19.412667] OOM killer enabled. [ 19.415832] Restarting tasks ... done. [ 19.420130] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.462368] PM: suspend entry (deep) [ 20.465956] PM: Syncing filesystems ... done. [ 20.471496] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.479709] OOM killer disabled. [ 20.482929] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.491567] Suspending console(s) (use no_console_suspend to debug) [ 20.677661] Disabling non-boot CPUs ... [ 20.844089] IRQ17 no longer affine to CPU3 [ 20.844624] Entering suspend state LP1 [ 20.844650] Enabling non-boot CPUs ... [ 20.845393] CPU1 is up [ 20.846011] CPU2 is up [ 20.846669] CPU3 is up [ 20.887900] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.899915] mmc1: Switching to 3.3V signalling voltage failed [ 21.114416] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.429042] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.429208] panel-simple panel: panel supply power not found, using dummy regulator [ 21.483640] OOM killer enabled. [ 21.486804] Restarting tasks ... done. [ 21.491012] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 22.521875] PM: suspend entry (deep) [ 22.525450] PM: Syncing filesystems ... done. [ 22.530910] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.538993] OOM killer disabled. [ 22.542209] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.550802] Suspending console(s) (use no_console_suspend to debug) [ 22.737318] Disabling non-boot CPUs ... [ 22.914595] Entering suspend state LP1 [ 22.914620] Enabling non-boot CPUs ... [ 22.915365] CPU1 is up [ 22.915980] CPU2 is up [ 22.916642] CPU3 is up [ 22.957850] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.969966] mmc1: Switching to 3.3V signalling voltage failed [ 23.184427] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.498779] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.498944] panel-simple panel: panel supply power not found, using dummy regulator [ 23.549280] OOM killer enabled. [ 23.552422] Restarting tasks ... done. [ 23.556864] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 24.591856] PM: suspend entry (deep) [ 24.595432] PM: Syncing filesystems ... done. [ 24.600886] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.608972] OOM killer disabled. [ 24.612187] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.620778] Suspending console(s) (use no_console_suspend to debug) [ 24.807442] Disabling non-boot CPUs ... [ 24.954572] Entering suspend state LP1 [ 24.954598] Enabling non-boot CPUs ... [ 24.955341] CPU1 is up [ 24.955958] CPU2 is up [ 24.956618] CPU3 is up [ 24.997816] cros-ec-spi spi0.0: spi transfer failed: -121 [ 25.010023] mmc1: Switching to 3.3V signalling voltage failed [ 25.539743] tegra-sor 54540000.sor: failed to probe output: -517 [ 25.539907] panel-simple panel: panel supply power not found, using dummy regulator [ 25.583280] OOM killer enabled. [ 25.586421] Restarting tasks ... done. [ 25.590639] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE