U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.5 MiB/s done Bytes transferred = 6369032 (612f08 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x612f08 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171206-218956-gd5c5286 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Dec 6 08:57:08 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008026] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017558] Switching to timer-based delay loop, resolution 1000ns [ 0.024077] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029779] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040525] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048496] Switching to timer-based delay loop, resolution 83ns [ 0.054673] Console: colour dummy device 80x30 [ 0.058905] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069214] pid_max: default: 32768 minimum: 301 [ 0.073980] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080396] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087740] CPU: Testing write buffer coherency: ok [ 0.092408] /cpus/cpu@0 missing clock-frequency property [ 0.097560] /cpus/cpu@1 missing clock-frequency property [ 0.102856] /cpus/cpu@2 missing clock-frequency property [ 0.108133] /cpus/cpu@3 missing clock-frequency property [ 0.113415] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153458] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158113] Hierarchical SRCU implementation. [ 0.173666] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193462] smp: Bringing up secondary CPUs ... [ 0.243707] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323739] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403778] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413607] smp: Brought up 1 node, 4 CPUs [ 0.432685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438842] CPU: All CPU(s) started in SVC mode. [ 0.444131] devtmpfs: initialized [ 0.453115] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.459018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.468652] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.475328] pinctrl core: initialized pinctrl subsystem [ 0.480474] NET: Registered protocol family 16 [ 0.484985] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.491723] cpuidle: using governor menu [ 0.502817] No ATAGs? [ 0.502876] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.511216] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.517881] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.525559] iommu: Adding device reg-dummy to group 0 [ 0.530473] iommu: Adding device 50000000.host1x to group 1 [ 0.536025] iommu: Adding device 54200000.dc to group 2 [ 0.541216] iommu: Adding device 54240000.dc to group 3 [ 0.546411] iommu: Adding device 54280000.hdmi to group 4 [ 0.551779] iommu: Adding device 54540000.sor to group 5 [ 0.557070] iommu: Adding device 545c0000.dpaux to group 6 [ 0.562540] iommu: Adding device 57000000.gpu to group 7 [ 0.567816] iommu: Adding device 60005000.timer to group 8 [ 0.573270] iommu: Adding device 60007000.flow-controller to group 9 [ 0.579602] iommu: Adding device 6000c800.actmon to group 10 [ 0.585231] iommu: Adding device 6000d000.gpio to group 11 [ 0.590698] iommu: Adding device 60020000.dma to group 12 [ 0.596063] iommu: Adding device 70000800.apbmisc to group 13 [ 0.601789] iommu: Adding device 70000868.pinmux to group 14 [ 0.607416] iommu: Adding device 70006000.serial to group 15 [ 0.613055] iommu: Adding device 7000a000.pwm to group 16 [ 0.618424] iommu: Adding device 7000c000.i2c to group 17 [ 0.623801] iommu: Adding device 7000c400.i2c to group 18 [ 0.629172] iommu: Adding device 7000c500.i2c to group 19 [ 0.634549] iommu: Adding device 7000c700.i2c to group 20 [ 0.639916] iommu: Adding device 7000d000.i2c to group 21 [ 0.645299] iommu: Adding device 7000d400.spi to group 22 [ 0.650662] iommu: Adding device 7000da00.spi to group 23 [ 0.656042] iommu: Adding device 7000e000.rtc to group 24 [ 0.661410] iommu: Adding device 7000e400.pmc to group 25 [ 0.666790] iommu: Adding device 7000f800.fuse to group 26 [ 0.672243] iommu: Adding device 70019000.memory-controller to group 27 [ 0.678838] iommu: Adding device 7001b000.emc to group 28 [ 0.684202] iommu: Adding device 70030000.hda to group 29 [ 0.689582] iommu: Adding device 70090000.usb to group 30 [ 0.694949] iommu: Adding device 7009f000.padctl to group 31 [ 0.700588] iommu: Adding device 700b0000.sdhci to group 32 [ 0.706130] iommu: Adding device 700b0400.sdhci to group 33 [ 0.711687] iommu: Adding device 700b0600.sdhci to group 34 [ 0.717223] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.723555] iommu: Adding device 70300000.ahub to group 36 [ 0.729011] iommu: Adding device pmu to group 37 [ 0.733614] iommu: Adding device timer to group 38 [ 0.738369] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.743835] iommu: Adding device backlight to group 40 [ 0.748945] iommu: Adding device clocks to group 41 [ 0.753795] iommu: Adding device gpio-keys to group 42 [ 0.758915] iommu: Adding device regulators to group 43 [ 0.764110] iommu: Adding device regulators:regulator@0 to group 44 [ 0.770354] iommu: Adding device regulators:regulator@1 to group 45 [ 0.776589] iommu: Adding device regulators:regulator@2 to group 46 [ 0.782835] iommu: Adding device regulators:regulator@3 to group 47 [ 0.789071] iommu: Adding device regulators:regulator@4 to group 48 [ 0.795319] iommu: Adding device regulators:regulator@5 to group 49 [ 0.801549] iommu: Adding device regulators:regulator@6 to group 50 [ 0.807795] iommu: Adding device regulators:regulator@7 to group 51 [ 0.814029] iommu: Adding device regulators:regulator@8 to group 52 [ 0.820277] iommu: Adding device regulators:regulator@9 to group 53 [ 0.826509] iommu: Adding device regulators:regulator@10 to group 54 [ 0.832844] iommu: Adding device regulators:regulator@11 to group 55 [ 0.839162] iommu: Adding device regulators:regulator@12 to group 56 [ 0.845496] iommu: Adding device sound to group 57 [ 0.850256] iommu: Adding device gpio-restart to group 58 [ 0.855634] iommu: Adding device panel to group 59 [ 0.866163] +5V_SYS: supplied by +VDD_MUX [ 0.868389] +3.3V_SYS: supplied by +VDD_MUX [ 0.872690] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.878059] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.886144] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.892107] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.900183] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.905964] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.914049] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.919830] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.927977] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.934824] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.942996] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.948862] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.957435] vgaarb: loaded [ 0.959963] SCSI subsystem initialized [ 0.963510] libata version 3.00 loaded. [ 0.967344] usbcore: registered new interface driver usbfs [ 0.972719] usbcore: registered new interface driver hub [ 0.978010] usbcore: registered new device driver usb [ 0.984240] Linux video capture interface: v2.00 [ 0.987619] pps_core: LinuxPPS API ver. 1 registered [ 0.992534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.001655] PTP clock support registered [ 1.005676] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 1.012915] tegra-emc: probe of 7001b000.emc failed with error -2 [ 1.019071] Advanced Linux Sound Architecture Driver Initialized. [ 1.025286] Bluetooth: Core ver 2.22 [ 1.028606] NET: Registered protocol family 31 [ 1.033007] Bluetooth: HCI device and connection manager initialized [ 1.039345] Bluetooth: HCI socket layer initialized [ 1.044189] Bluetooth: L2CAP socket layer initialized [ 1.049229] Bluetooth: SCO socket layer initialized [ 1.054331] clocksource: Switched to clocksource arch_sys_counter [ 1.091580] NET: Registered protocol family 2 [ 1.094411] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.101667] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.108711] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.115145] TCP: Hash tables configured (established 8192 bind 8192) [ 1.121581] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.127321] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.133745] NET: Registered protocol family 1 [ 1.138254] RPC: Registered named UNIX socket transport module. [ 1.143853] RPC: Registered udp transport module. [ 1.148542] RPC: Registered tcp transport module. [ 1.153213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.159802] iommu: Adding device regulatory.0 to group 60 [ 1.165088] PCI: CLS 0 bytes, default 64 [ 1.169594] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.177320] iommu: Adding device alarmtimer to group 61 [ 1.182648] Initialise system trusted keyrings [ 1.186752] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.193562] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.199181] NFS: Registering the id_resolver key type [ 1.203918] Key type id_resolver registered [ 1.208085] Key type id_legacy registered [ 1.213819] Key type asymmetric registered [ 1.216143] Asymmetric key parser 'x509' registered [ 1.221038] bounce: pool size: 64 pages [ 1.224827] io scheduler noop registered (default) [ 1.229567] io scheduler mq-deadline registered [ 1.234072] io scheduler kyber registered [ 1.238707] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.251107] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.257188] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 1.265989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.272137] iommu: Adding device serial8250 to group 62 [ 1.277942] console [ttyS0] disabled [ 1.280864] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.289818] console [ttyS0] enabled [ 1.289818] console [ttyS0] enabled [ 1.296024] bootconsole [earlycon0] disabled [ 1.296024] bootconsole [earlycon0] disabled [ 1.322068] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.328619] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.336085] panel-simple panel: panel supply power not found, using dummy regulator [ 1.347387] loop: module loaded [ 1.351081] as3722 4-0040: AS3722 with revision 0x1 found [ 1.357707] iommu: Adding device as3722-pinctrl to group 63 [ 1.364645] iommu: Adding device as3722-regulator to group 64 [ 1.372461] as3722-sd2: supplied by +5V_SYS [ 1.376903] as3722-sd3: supplied by +5V_SYS [ 1.381241] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.387432] as3722-sd4: supplied by +5V_SYS [ 1.391766] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.397521] as3722-sd5: supplied by +5V_SYS [ 1.403123] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.408868] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.414892] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.420525] as3722-ldo3: supplied by +3.3V_SYS [ 1.424987] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.432559] as3722-ldo4: supplied by +3.3V_SYS [ 1.437166] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.443180] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.447961] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.454657] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.460684] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.465466] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.472016] as3722-ldo9: supplied by +5V_SYS [ 1.476592] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.482793] as3722-ldo10: supplied by +5V_SYS [ 1.487317] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.493754] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.500277] iommu: Adding device as3722-rtc to group 65 [ 1.505560] iommu: Adding device as3722-adc to group 66 [ 1.510822] iommu: Adding device as3722-power-off to group 67 [ 1.516618] iommu: Adding device as3722-wdt to group 68 [ 1.534712] iommu: Adding device cros-ec-ctl.0.auto to group 69 [ 1.540693] iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70 [ 1.548022] iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71 [ 1.558926] cros-ec-spi spi0.0: Chrome EC device registered [ 1.573768] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.589246] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.595053] libphy: Fixed MDIO Bus: probed [ 1.599137] CAN device driver interface [ 1.602982] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.609933] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.615542] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.622945] usbcore: registered new interface driver pegasus [ 1.628623] usbcore: registered new interface driver asix [ 1.634024] usbcore: registered new interface driver ax88179_178a [ 1.640131] usbcore: registered new interface driver cdc_ether [ 1.645979] usbcore: registered new interface driver smsc75xx [ 1.651730] usbcore: registered new interface driver smsc95xx [ 1.657486] usbcore: registered new interface driver net1080 [ 1.663148] usbcore: registered new interface driver cdc_subset [ 1.669076] usbcore: registered new interface driver zaurus [ 1.674665] usbcore: registered new interface driver cdc_ncm [ 1.680398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.686917] ehci-pci: EHCI PCI platform driver [ 1.691367] tegra-ehci: Tegra EHCI driver [ 1.695637] usbcore: registered new interface driver cdc_acm [ 1.701281] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.709292] usbcore: registered new interface driver cdc_wdm [ 1.714966] usbcore: registered new interface driver usb-storage [ 1.721620] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.741122] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.747989] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.754738] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.761874] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.768159] i2c /dev entries driver [ 1.772057] usbcore: registered new interface driver uvcvideo [ 1.777795] USB Video Class driver (1.1.1) [ 1.781878] gspca_main: v2.14.0 registered [ 1.786200] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.794851] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.802875] iommu: Adding device cpufreq-tegra124 to group 73 [ 1.808943] sdhci: Secure Digital Host Controller Interface driver [ 1.815118] sdhci: Copyright(c) Pierre Ossman [ 1.819462] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.825236] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.838468] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.843338] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.862465] mmc0: Unknown controller version (3). You may experience problems. [ 1.869705] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.906478] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.914189] usbcore: registered new interface driver usbhid [ 1.919869] usbhid: USB HID core driver [ 1.924579] iommu: Adding device snd-soc-dummy to group 74 [ 1.931210] iommu: Adding device 70301100.i2s to group 75 [ 1.937152] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.984057] mmc0: new high speed MMC card at address 0001 [ 1.991283] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.996334] max98090 0-0010: MAX98090 REVID=0x43 [ 2.002311] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.010001] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.016051] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 2.024613] max98090 0-0010: use default 2.8v micbias [ 2.026348] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.038023] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 2.045532] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 2.053465] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 2.061675] NET: Registered protocol family 10 [ 2.066632] Segment Routing with IPv6 [ 2.070348] mip6: Mobile IPv6 [ 2.073307] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.079759] NET: Registered protocol family 17 [ 2.084196] NET: Registered protocol family 15 [ 2.088634] can: controller area network core (rev 20170425 abi 9) [ 2.094884] NET: Registered protocol family 29 [ 2.099316] can: raw protocol (rev 20170425) [ 2.103573] can: broadcast manager protocol (rev 20170425 t) [ 2.109228] can: netlink gateway (rev 20170425) max_hops=1 [ 2.114777] Bluetooth: RFCOMM socket layer initialized [ 2.119912] Bluetooth: RFCOMM ver 1.11 [ 2.123652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.128962] Bluetooth: BNEP socket layer initialized [ 2.133912] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.139823] Bluetooth: HIDP socket layer initialized [ 2.144879] Key type dns_resolver registered [ 2.149326] Registering SWP/SWPB emulation handler [ 2.154399] Loading compiled-in X.509 certificates [ 2.165561] +3.3V_RUN: supplied by +3.3V_SYS [ 2.170455] +VDD_LED: supplied by +VDD_MUX [ 2.174755] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.180383] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.185119] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.189763] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.195032] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.199635] +5V_USB_HS: supplied by +5V_SYS [ 2.203952] +5V_USB_SS: supplied by +5V_SYS [ 2.209266] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.214646] +3.3V_LP0: supplied by +3.3V_SYS [ 2.219648] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.225516] +5V_HDMI_CON: supplied by +5V_SYS [ 2.230466] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.237290] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.246528] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.252685] panel-simple panel: panel supply power not found, using dummy regulator [ 2.325093] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.332490] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.337907] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 2.347462] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.356117] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 2.362713] hub 1-0:1.0: USB hub found [ 2.366532] hub 1-0:1.0: 6 ports detected [ 2.370901] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.376329] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 2.384011] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.392684] hub 2-0:1.0: USB hub found [ 2.396496] hub 2-0:1.0: 2 ports detected [ 2.401541] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.414619] mmc1: Unknown controller version (3). You may experience problems. [ 2.421876] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.428333] mmc1: Switching to 3.3V signalling voltage failed [ 2.457090] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.464746] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.469619] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.479890] mmc2: Unknown controller version (3). You may experience problems. [ 2.487228] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.523448] mmc1: new high speed SDIO card at address 0001 [ 2.529285] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.536859] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.543018] panel-simple panel: panel supply power not found, using dummy regulator [ 2.551127] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.558072] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.564294] panel-simple panel: panel supply power not found, using dummy regulator [ 2.571960] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:25:27 UTC (946686327) [ 2.572110] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.573843] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.573966] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.573970] cfg80211: failed to load regulatory.db [ 2.574258] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.574269] +1.8V_RUN_CAM: disabling [ 2.574621] +1.2V_RUN_CAM_FRONT: disabling [ 2.574864] +1.05V_RUN_CAM_REAR: disabling [ 2.575105] +2.8V_RUN_TOUCH: disabling [ 2.575348] +2.8V_RUN_CAM_AF: disabling [ 2.575589] +1.8V_RUN_VPP_FUSE: disabling [ 2.575721] +VDD_LED: disabling [ 2.575724] +5V_VDD_TS_SW: disabling [ 2.575730] +3.3V_PANEL: disabling [ 2.575735] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.575737] +5V_HDMI_CON: disabling [ 2.575740] ALSA device list: [ 2.575743] #1: GoogleNyanBig [ 2.704808] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.711025] panel-simple panel: panel supply power not found, using dummy regulator [ 2.719237] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.728697] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.779716] EXT4-fs (mmcblk0p3): recovery complete [ 2.785287] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.793450] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.799637] mmc2: new high speed SDHC card at address 0007 [ 2.805002] devtmpfs: mounted [ 2.805527] Freeing unused kernel memory: 1024K [ 2.814377] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.821409] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.835662] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.841837] GPT:3014591 != 15564799 [ 2.845345] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.852728] GPT:3014591 != 15564799 [ 2.856235] GPT: Use GNU Parted to correct GPT errors. [ 2.861387] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.869508] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.875688] panel-simple panel: panel supply power not found, using dummy regulator bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.147467] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 3.162346] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 3.172047] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.178232] panel-simple panel: panel supply power not found, using dummy regulator [ 3.514421] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 4.174288] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 4.185268] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.191425] panel-simple panel: panel supply power not found, using dummy regulator [ 4.534422] usb 1-1: new high-speed USB device number 4 using tegra-xusb mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 4.722622] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.729434] scsi host0: usb-storage 1-1:1.0 [ 4.734041] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.740338] panel-simple panel: panel supply power not found, using dummy regulator rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.661113] PM: suspend entry (deep) [ 5.664720] PM: Syncing filesystems ... done. [ 5.670896] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.679043] OOM killer disabled. [ 5.682273] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.690897] Suspending console(s) (use no_console_suspend to debug) [ 5.878095] Disabling non-boot CPUs ... [ 5.994510] IRQ17 no longer affine to CPU2 [ 6.055068] Entering suspend state LP1 [ 6.055094] Enabling non-boot CPUs ... [ 6.055789] CPU1 is up [ 6.056389] CPU2 is up [ 6.057036] CPU3 is up [ 6.098146] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.110221] mmc1: Switching to 3.3V signalling voltage failed [ 6.639162] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.639327] panel-simple panel: panel supply power not found, using dummy regulator [ 6.686896] OOM killer enabled. [ 6.690036] Restarting tasks ... done. [ 6.694539] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 6.695366] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.695614] panel-simple panel: panel supply power not found, using dummy regulator [ 6.716548] PM: suspend exit root@(none):/# root@(none):/# [ 6.900833] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 6.909701] sd 0:0:0:0: [sda] Write Protect is off [ 6.914521] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 6.920634] sd 0:0:0:0: [sda] No Caching mode page found [ 6.925973] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.952507] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 6.963793] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:32 1970 [ 7.924085] PM: suspend entry (deep) [ 7.927674] PM: Syncing filesystems ... done. [ 7.933389] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.941542] OOM killer disabled. [ 7.944778] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.953365] Suspending console(s) (use no_console_suspend to debug) [ 8.137870] Disabling non-boot CPUs ... [ 8.314452] IRQ17 no longer affine to CPU3 [ 8.315032] Entering suspend state LP1 [ 8.315057] Enabling non-boot CPUs ... [ 8.315799] CPU1 is up [ 8.316421] CPU2 is up [ 8.317086] CPU3 is up [ 8.358228] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.370389] mmc1: Switching to 3.3V signalling voltage failed [ 8.584705] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.899964] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.900131] panel-simple panel: panel supply power not found, using dummy regulator [ 8.954544] OOM killer enabled. [ 8.957676] Restarting tasks ... done. [ 8.962364] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:37 1970 [ 10.184186] PM: suspend entry (deep) [ 10.187785] PM: Syncing filesystems ... done. [ 10.193472] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.201647] OOM killer disabled. [ 10.204882] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.213475] Suspending console(s) (use no_console_suspend to debug) [ 10.397671] Disabling non-boot CPUs ... [ 10.574432] IRQ17 no longer affine to CPU3 [ 10.575037] Entering suspend state LP1 [ 10.575062] Enabling non-boot CPUs ... [ 10.575800] CPU1 is up [ 10.576423] CPU2 is up [ 10.577090] CPU3 is up [ 10.618277] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.630577] mmc1: Switching to 3.3V signalling voltage failed [ 10.844783] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.159165] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.159330] panel-simple panel: panel supply power not found, using dummy regulator [ 11.213757] OOM killer enabled. [ 11.216919] Restarting tasks ... done. [ 11.221152] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:42 1970 [ 12.444191] PM: suspend entry (deep) [ 12.447789] PM: Syncing filesystems ... done. [ 12.453545] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.461719] OOM killer disabled. [ 12.464954] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.473541] Suspending console(s) (use no_console_suspend to debug) [ 12.657479] Disabling non-boot CPUs ... [ 12.734453] IRQ17 no longer affine to CPU1 [ 12.854924] Entering suspend state LP1 [ 12.854950] Enabling non-boot CPUs ... [ 12.855692] CPU1 is up [ 12.856313] CPU2 is up [ 12.856981] CPU3 is up [ 12.898443] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.910902] mmc1: Switching to 3.3V signalling voltage failed [ 13.124723] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.437886] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.438051] panel-simple panel: panel supply power not found, using dummy regulator [ 13.492493] OOM killer enabled. [ 13.495655] Restarting tasks ... done. [ 13.500147] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 14.723837] PM: suspend entry (deep) [ 14.727423] PM: Syncing filesystems ... done. [ 14.733070] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.741259] OOM killer disabled. [ 14.744484] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.753075] Suspending console(s) (use no_console_suspend to debug) [ 14.937680] Disabling non-boot CPUs ... [ 15.094977] Entering suspend state LP1 [ 15.095003] Enabling non-boot CPUs ... [ 15.095745] CPU1 is up [ 15.096361] CPU2 is up [ 15.097029] CPU3 is up [ 15.138680] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.150867] mmc1: Switching to 3.3V signalling voltage failed [ 15.364737] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.677689] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.677854] panel-simple panel: panel supply power not found, using dummy regulator [ 15.728097] OOM killer enabled. [ 15.731226] Restarting tasks ... done. [ 15.735537] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 16.973250] PM: suspend entry (deep) [ 16.976837] PM: Syncing filesystems ... done. [ 16.982487] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.990682] OOM killer disabled. [ 16.993898] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.002492] Suspending console(s) (use no_console_suspend to debug) [ 17.187863] Disabling non-boot CPUs ... [ 17.364978] Entering suspend state LP1 [ 17.365003] Enabling non-boot CPUs ... [ 17.365744] CPU1 is up [ 17.366365] CPU2 is up [ 17.367031] CPU3 is up [ 17.408373] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.420515] mmc1: Switching to 3.3V signalling voltage failed [ 17.634708] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.949111] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.949277] panel-simple panel: panel supply power not found, using dummy regulator [ 17.999644] OOM killer enabled. [ 18.002784] Restarting tasks ... done. [ 18.007228] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 19.243830] PM: suspend entry (deep) [ 19.247415] PM: Syncing filesystems ... done. [ 19.253096] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.261170] OOM killer disabled. [ 19.264400] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.272976] Suspending console(s) (use no_console_suspend to debug) [ 19.457338] Disabling non-boot CPUs ... [ 19.634843] Entering suspend state LP1 [ 19.634868] Enabling non-boot CPUs ... [ 19.635613] CPU1 is up [ 19.636230] CPU2 is up [ 19.636901] CPU3 is up [ 19.678182] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.690285] mmc1: Switching to 3.3V signalling voltage failed [ 19.904684] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 20.217908] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.218074] panel-simple panel: panel supply power not found, using dummy regulator [ 20.268428] OOM killer enabled. [ 20.271561] Restarting tasks ... done. [ 20.275799] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 21.513596] PM: suspend entry (deep) [ 21.517181] PM: Syncing filesystems ... done. [ 21.522800] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.530981] OOM killer disabled. [ 21.534202] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.542791] Suspending console(s) (use no_console_suspend to debug) [ 21.727505] Disabling non-boot CPUs ... [ 21.864823] Entering suspend state LP1 [ 21.864848] Enabling non-boot CPUs ... [ 21.865593] CPU1 is up [ 21.866206] CPU2 is up [ 21.866879] CPU3 is up [ 21.908267] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.920728] mmc1: Switching to 3.3V signalling voltage failed [ 22.134651] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 22.447421] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.447589] panel-simple panel: panel supply power not found, using dummy regulator [ 22.497876] OOM killer enabled. [ 22.501005] Restarting tasks ... done. [ 22.505685] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 23.743305] PM: suspend entry (deep) [ 23.746891] PM: Syncing filesystems ... done. [ 23.752526] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.760712] OOM killer disabled. [ 23.763928] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.772537] Suspending console(s) (use no_console_suspend to debug) [ 23.957855] Disabling non-boot CPUs ... [ 24.004339] IRQ17 no longer affine to CPU1 [ 24.144877] Entering suspend state LP1 [ 24.144902] Enabling non-boot CPUs ... [ 24.145645] CPU1 is up [ 24.146264] CPU2 is up [ 24.146922] CPU3 is up [ 24.188145] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.200584] mmc1: Switching to 3.3V signalling voltage failed [ 24.414599] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 24.728080] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.728245] panel-simple panel: panel supply power not found, using dummy regulator [ 24.782685] OOM killer enabled. [ 24.785841] Restarting tasks ... done. [ 24.790071] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:12 1970 [ 26.023141] PM: suspend entry (deep) [ 26.026728] PM: Syncing filesystems ... done. [ 26.032363] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 26.040468] OOM killer disabled. [ 26.043684] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 26.052261] Suspending console(s) (use no_console_suspend to debug) [ 26.237282] Disabling non-boot CPUs ... [ 26.414777] Entering suspend state LP1 [ 26.414803] Enabling non-boot CPUs ... [ 26.415552] CPU1 is up [ 26.416170] CPU2 is up [ 26.416830] CPU3 is up [ 26.457955] cros-ec-spi spi0.0: spi transfer failed: -121 [ 26.470156] mmc1: Switching to 3.3V signalling voltage failed [ 26.684608] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 26.998755] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.998922] panel-simple panel: panel supply power not found, using dummy regulator [ 27.049261] OOM killer enabled. [ 27.052403] Restarting tasks ... done. [ 27.056654] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE