U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# 940.4 KiB/s done Bytes transferred = 6204160 (5eab00 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 927.7 KiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5eab00 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171206-17248-gd5c5286 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Dec 6 08:56:59 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998492K/2096128K available (9216K kernel code, 778K rwdata, 2564K rodata, 1024K init, 298K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007479] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017008] Switching to timer-based delay loop, resolution 1000ns [ 0.024187] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029231] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039978] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047946] Switching to timer-based delay loop, resolution 83ns [ 0.054432] Console: colour dummy device 80x30 [ 0.058362] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068671] pid_max: default: 32768 minimum: 301 [ 0.073756] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079856] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087698] CPU: Testing write buffer coherency: ok [ 0.092021] /cpus/cpu@0 missing clock-frequency property [ 0.097030] /cpus/cpu@1 missing clock-frequency property [ 0.102337] /cpus/cpu@2 missing clock-frequency property [ 0.107603] /cpus/cpu@3 missing clock-frequency property [ 0.112874] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152989] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157741] Hierarchical SRCU implementation. [ 0.173507] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193012] smp: Bringing up secondary CPUs ... [ 0.243565] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323681] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403797] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413451] smp: Brought up 1 node, 4 CPUs [ 0.432539] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438707] CPU: All CPU(s) started in SVC mode. [ 0.445133] devtmpfs: initialized [ 0.465117] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.471235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.480673] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.488181] pinctrl core: initialized pinctrl subsystem [ 0.493212] NET: Registered protocol family 16 [ 0.497896] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.504589] cpuidle: using governor menu [ 0.530388] No ATAGs? [ 0.530521] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.538881] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.546535] iommu: Adding device reg-dummy to group 0 [ 0.549758] iommu: Adding device 1003000.pcie to group 1 [ 0.555055] iommu: Adding device 50000000.host1x to group 2 [ 0.560615] iommu: Adding device 54200000.dc to group 3 [ 0.565796] iommu: Adding device 54240000.dc to group 4 [ 0.570981] iommu: Adding device 54280000.hdmi to group 5 [ 0.576370] iommu: Adding device 57000000.gpu to group 6 [ 0.581641] iommu: Adding device 60005000.timer to group 7 [ 0.587075] iommu: Adding device 60007000.flow-controller to group 8 [ 0.593427] iommu: Adding device 6000c800.actmon to group 9 [ 0.598951] iommu: Adding device 6000d000.gpio to group 10 [ 0.604427] iommu: Adding device 60020000.dma to group 11 [ 0.609786] iommu: Adding device 70000800.apbmisc to group 12 [ 0.615520] iommu: Adding device 70000868.pinmux to group 13 [ 0.621148] iommu: Adding device 70006000.serial to group 14 [ 0.626787] iommu: Adding device 70006040.serial to group 15 [ 0.632401] iommu: Adding device 70006300.serial to group 16 [ 0.638055] iommu: Adding device 7000c000.i2c to group 17 [ 0.643408] iommu: Adding device 7000c400.i2c to group 18 [ 0.648798] iommu: Adding device 7000c500.i2c to group 19 [ 0.654162] iommu: Adding device 7000c700.i2c to group 20 [ 0.659554] iommu: Adding device 7000d000.i2c to group 21 [ 0.664902] iommu: Adding device 7000d400.spi to group 22 [ 0.670294] iommu: Adding device 7000da00.spi to group 23 [ 0.675650] iommu: Adding device 7000e000.rtc to group 24 [ 0.681041] iommu: Adding device 7000e400.pmc to group 25 [ 0.686394] iommu: Adding device 7000f800.fuse to group 26 [ 0.691872] iommu: Adding device 70019000.memory-controller to group 27 [ 0.698443] iommu: Adding device 7001b000.emc to group 28 [ 0.703838] iommu: Adding device 70027000.sata to group 29 [ 0.709276] iommu: Adding device 70030000.hda to group 30 [ 0.714676] iommu: Adding device 70090000.usb to group 31 [ 0.720023] iommu: Adding device 7009f000.padctl to group 32 [ 0.725682] iommu: Adding device 700b0400.sdhci to group 33 [ 0.731202] iommu: Adding device 700b0600.sdhci to group 34 [ 0.736766] iommu: Adding device 70015000.cec to group 35 [ 0.742136] iommu: Adding device 700e2000.thermal-sensor to group 36 [ 0.748470] iommu: Adding device 70110000.clock to group 37 [ 0.753995] iommu: Adding device 70300000.ahub to group 38 [ 0.759474] iommu: Adding device 7d000000.usb to group 39 [ 0.764828] iommu: Adding device 7d000000.usb-phy to group 40 [ 0.770573] iommu: Adding device 7d004000.usb to group 41 [ 0.775923] iommu: Adding device 7d004000.usb-phy to group 42 [ 0.781664] iommu: Adding device 7d008000.usb to group 43 [ 0.787015] iommu: Adding device 7d008000.usb-phy to group 44 [ 0.792753] iommu: Adding device pmu to group 45 [ 0.797328] iommu: Adding device timer to group 46 [ 0.802095] iommu: Adding device clocks to group 47 [ 0.806964] iommu: Adding device gpio-keys to group 48 [ 0.812064] iommu: Adding device regulators to group 49 [ 0.817288] iommu: Adding device regulators:regulator@0 to group 50 [ 0.823502] iommu: Adding device regulators:regulator@1 to group 51 [ 0.829767] iommu: Adding device regulators:regulator@2 to group 52 [ 0.835983] iommu: Adding device regulators:regulator@3 to group 53 [ 0.842238] iommu: Adding device regulators:regulator@4 to group 54 [ 0.848462] iommu: Adding device regulators:regulator@7 to group 55 [ 0.854719] iommu: Adding device regulators:regulator@8 to group 56 [ 0.860949] iommu: Adding device regulators:regulator@10 to group 57 [ 0.867286] iommu: Adding device regulators:regulator@11 to group 58 [ 0.873595] iommu: Adding device regulators:regulator@12 to group 59 [ 0.879940] iommu: Adding device regulators:regulator@13 to group 60 [ 0.886249] iommu: Adding device regulators:regulator@14 to group 61 [ 0.892591] iommu: Adding device sound to group 62 [ 0.914251] +5V_SYS: supplied by +VDD_MUX [ 0.916733] +3.3V_SYS: supplied by +VDD_MUX [ 0.921302] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.926624] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.934746] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.940470] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.948701] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.955490] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.963687] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.969502] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.977729] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.983282] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.991507] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.997146] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 1.006581] vgaarb: loaded [ 1.008740] SCSI subsystem initialized [ 1.011930] libata version 3.00 loaded. [ 1.015823] usbcore: registered new interface driver usbfs [ 1.021050] usbcore: registered new interface driver hub [ 1.026344] usbcore: registered new device driver usb [ 1.034520] Linux video capture interface: v2.00 [ 1.037300] pps_core: LinuxPPS API ver. 1 registered [ 1.042191] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.051304] PTP clock support registered [ 1.056607] Advanced Linux Sound Architecture Driver Initialized. [ 1.061897] Bluetooth: Core ver 2.22 [ 1.064837] NET: Registered protocol family 31 [ 1.069227] Bluetooth: HCI device and connection manager initialized [ 1.075539] Bluetooth: HCI socket layer initialized [ 1.080404] Bluetooth: L2CAP socket layer initialized [ 1.085445] Bluetooth: SCO socket layer initialized [ 1.090922] clocksource: Switched to clocksource arch_sys_counter [ 1.186677] NET: Registered protocol family 2 [ 1.190100] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.196857] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.203887] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.210362] TCP: Hash tables configured (established 8192 bind 8192) [ 1.217020] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.222471] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.229055] NET: Registered protocol family 1 [ 1.243794] RPC: Registered named UNIX socket transport module. [ 1.247799] RPC: Registered udp transport module. [ 1.252535] RPC: Registered tcp transport module. [ 1.257159] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.264066] iommu: Adding device regulatory.0 to group 63 [ 1.269152] PCI: CLS 0 bytes, default 64 [ 1.274667] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.281682] iommu: Adding device alarmtimer to group 64 [ 1.287326] Initialise system trusted keyrings [ 1.290795] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.298419] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.313660] NFS: Registering the id_resolver key type [ 1.316811] Key type id_resolver registered [ 1.320993] Key type id_legacy registered [ 1.329653] Key type asymmetric registered [ 1.331869] Asymmetric key parser 'x509' registered [ 1.336824] bounce: pool size: 64 pages [ 1.340562] io scheduler noop registered (default) [ 1.345293] io scheduler mq-deadline registered [ 1.349779] io scheduler kyber registered [ 1.355619] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.360564] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.367772] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.383503] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.387207] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.397116] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.407844] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.414816] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.420335] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.426214] iommu: Adding device serial8250 to group 65 [ 1.433107] console [ttyS0] disabled [ 1.434861] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.444180] console [ttyS0] enabled [ 1.444180] console [ttyS0] enabled [ 1.449988] bootconsole [earlycon0] disabled [ 1.449988] bootconsole [earlycon0] disabled [ 1.459373] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.470425] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.499021] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.518574] loop: module loaded [ 1.523171] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.530605] as3722 4-0040: AS3722 with revision 0x1 found [ 1.538266] iommu: Adding device as3722-pinctrl to group 66 [ 1.545553] iommu: Adding device as3722-regulator to group 67 [ 1.554228] as3722-sd2: supplied by +5V_SYS [ 1.558912] as3722-sd3: supplied by +5V_SYS [ 1.563351] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.569711] as3722-sd4: supplied by +5V_SYS [ 1.574409] as3722-sd5: supplied by +5V_SYS [ 1.580481] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.586616] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.592886] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.598828] as3722-ldo3: supplied by +3.3V_SYS [ 1.603360] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.611195] as3722-ldo4: supplied by +3.3V_SYS [ 1.615876] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.622132] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.626987] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.633969] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.639621] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.645823] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.656049] iommu: Adding device as3722-rtc to group 68 [ 1.661463] iommu: Adding device as3722-adc to group 69 [ 1.666835] iommu: Adding device as3722-power-off to group 70 [ 1.672751] iommu: Adding device as3722-wdt to group 71 [ 1.678725] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.697125] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.713880] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.719802] libphy: Fixed MDIO Bus: probed [ 1.723920] CAN device driver interface [ 1.727803] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.734771] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.740478] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.747949] usbcore: registered new interface driver pegasus [ 1.753684] usbcore: registered new interface driver asix [ 1.759127] usbcore: registered new interface driver ax88179_178a [ 1.765296] usbcore: registered new interface driver cdc_ether [ 1.771222] usbcore: registered new interface driver smsc75xx [ 1.777027] usbcore: registered new interface driver smsc95xx [ 1.782837] usbcore: registered new interface driver net1080 [ 1.788539] usbcore: registered new interface driver cdc_subset [ 1.794524] usbcore: registered new interface driver zaurus [ 1.800167] usbcore: registered new interface driver cdc_ncm [ 1.806079] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.811727] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.817418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.823958] ehci-pci: EHCI PCI platform driver [ 1.828462] tegra-ehci: Tegra EHCI driver [ 1.835332] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.840748] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.848567] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.880953] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.887772] hub 1-0:1.0: USB hub found [ 1.891584] hub 1-0:1.0: 1 port detected [ 1.896747] usbcore: registered new interface driver cdc_acm [ 1.902420] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.910476] usbcore: registered new interface driver cdc_wdm [ 1.916238] usbcore: registered new interface driver usb-storage [ 1.923872] iommu: Adding device ci_hdrc.0 to group 73 [ 1.935812] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.942712] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.950497] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.957698] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.964242] i2c /dev entries driver [ 1.968977] usbcore: registered new interface driver uvcvideo [ 1.974740] USB Video Class driver (1.1.1) [ 1.978832] gspca_main: v2.14.0 registered [ 1.983582] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.993854] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 2.002362] iommu: Adding device cpufreq-tegra124 to group 74 [ 2.008668] sdhci: Secure Digital Host Controller Interface driver [ 2.014863] sdhci: Copyright(c) Pierre Ossman [ 2.019213] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.025206] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.030094] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.051396] mmc0: Unknown controller version (3). You may experience problems. [ 2.058654] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.095775] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.103915] usbcore: registered new interface driver usbhid [ 2.109480] usbhid: USB HID core driver [ 2.115982] iommu: Adding device snd-soc-dummy to group 75 [ 2.160241] mmc0: new high speed MMC card at address 0001 [ 2.170968] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.180599] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.191722] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.197869] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 2.206996] mmcblk0: p1 [ 2.561434] iommu: Adding device 70301100.i2s to group 76 [ 2.567728] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.588079] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.598908] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.610122] NET: Registered protocol family 10 [ 2.616014] Segment Routing with IPv6 [ 2.619848] mip6: Mobile IPv6 [ 2.622838] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.630247] NET: Registered protocol family 17 [ 2.634768] NET: Registered protocol family 15 [ 2.639221] can: controller area network core (rev 20170425 abi 9) [ 2.645627] NET: Registered protocol family 29 [ 2.650068] can: raw protocol (rev 20170425) [ 2.654352] can: broadcast manager protocol (rev 20170425 t) [ 2.660011] can: netlink gateway (rev 20170425) max_hops=1 [ 2.665742] Bluetooth: RFCOMM socket layer initialized [ 2.670891] Bluetooth: RFCOMM ver 1.11 [ 2.674668] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.679979] Bluetooth: BNEP socket layer initialized [ 2.684957] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.690875] Bluetooth: HIDP socket layer initialized [ 2.696099] Key type dns_resolver registered [ 2.700858] Registering SWP/SWPB emulation handler [ 2.706482] Loading compiled-in X.509 certificates [ 2.728886] +3.3V_RUN: supplied by +3.3V_SYS [ 2.734101] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.738795] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.744833] +5V_USB_HS: supplied by +5V_SYS [ 2.749942] +3.3V_LP0: supplied by +3.3V_SYS [ 2.755295] +5V_HDMI_CON: supplied by +5V_SYS [ 2.760083] +5V_SATA: supplied by +5V_SYS [ 2.764771] +12V_SATA: supplied by +VDD_MUX [ 2.770391] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.777261] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.784460] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.791978] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.797592] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.806723] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.815577] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.824272] as3722-sd2: supplied by +5V_SYS [ 2.828776] as3722-sd3: supplied by +5V_SYS [ 2.833297] as3722-sd4: supplied by +5V_SYS [ 2.837770] as3722-sd5: supplied by +5V_SYS [ 2.843637] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.849112] as3722-ldo1: supplied by +3.3V_RUN [ 2.854386] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.859919] as3722-ldo3: supplied by +3.3V_SYS [ 2.865462] as3722-ldo4: supplied by +3.3V_SYS [ 2.870205] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.875158] as3722-ldo6: supplied by +3.3V_RUN [ 2.879911] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.885937] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.894487] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.901630] as3722-ldo9: supplied by +5V_SYS [ 2.907103] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.913871] as3722-ldo10: supplied by +5V_SYS [ 2.918740] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.925590] as3722-ldo11: supplied by +3.3V_RUN [ 2.930870] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.940124] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.949202] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.959361] scsi host0: tegra-ahci [ 2.964072] scsi host1: tegra-ahci [ 2.967777] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.975823] ata2: DUMMY [ 2.979662] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.985119] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.992953] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 3.021051] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.028027] hub 2-0:1.0: USB hub found [ 3.031955] hub 2-0:1.0: 1 port detected [ 3.049227] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 [ 3.059024] tegra-xusb 70090000.usb: failed to request firmware: -2 [ 3.065431] tegra-xusb 70090000.usb: failed to load firmware: -2 [ 3.072083] tegra-xusb: probe of 70090000.usb failed with error -2 [ 3.079083] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.084059] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.097349] mmc1: Unknown controller version (3). You may experience problems. [ 3.104726] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.141336] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.149034] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 3.156515] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 3.164316] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 3.189065] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 3.197419] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 3.211437] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 3.217721] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.224025] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.231053] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.238451] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.244044] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.250078] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.259838] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.269653] pci 0000:00:01.0: enabling Extended Tags [ 3.274742] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.284557] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.294435] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.301194] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.304561] ata1: SATA link down (SStatus 0 SControl 300) [ 3.316820] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.322886] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.332616] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.342429] pci 0000:00:02.0: enabling Extended Tags [ 3.347443] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.357217] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.367054] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.373811] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.383920] PCI: bus0: Fast back to back transfers disabled [ 3.389575] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.397654] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.405961] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.412089] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.419211] PCI: bus1: Fast back to back transfers disabled [ 3.424865] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.431781] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.437881] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.443566] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.450543] mmc1: new high speed SDHC card at address aaaa [ 3.455893] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.466713] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.474335] PCI: bus2: Fast back to back transfers disabled [ 3.480059] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.486873] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.493921] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.500969] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.508948] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.515233] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.522728] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.527881] mmcblk1: p1 p2 p3 [ 3.531362] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.538394] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.547310] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.554705] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.560824] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.565844] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.572009] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.578813] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.586651] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.593844] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.600273] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.606291] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.613454] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.619855] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.626008] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.631641] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.637501] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.672738] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xaba29bca, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.682328] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.694497] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.703394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.710022] [drm] No driver support for vblank timestamp query. [ 3.846179] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 4.093317] Console: switching to colour frame buffer device 512x135 [ 4.189286] drm drm: fb0: frame buffer device [ 4.193828] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.201174] iommu: Adding device cpufreq-dt.0 to group 77 [ 4.206844] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 4.214189] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 4.223220] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 4.230303] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:18 UTC (946684818) [ 4.239131] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.248840] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.255557] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.261302] +USB0_VBUS_SW: disabling [ 4.261318] +1.8V_RUN_CAM: disabling [ 4.264261] +2.8V_RUN_CAM: disabling [ 4.267913] +1.2V_RUN_CAM_FRONT: disabling [ 4.271519] +1.05V_RUN_CAM_REAR: disabling [ 4.275107] +3.3V_RUN_TOUCH: disabling [ 4.279208] +2.8V_RUN_CAM_AF: disabling [ 4.283331] +1.8V_RUN_VPP_FUSE: disabling [ 4.287092] ALSA device list: [ 4.287096] #0: tegra-hda at 0x70038000 irq 346 [ 4.287098] #1: NVIDIA Tegra Jetson TK1 [ 4.306602] cfg80211: failed to load regulatory.db [ 4.312588] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.360132] EXT4-fs (mmcblk0p1): recovery complete [ 4.365972] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.374140] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.385025] devtmpfs: mounted [ 4.388405] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#