U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.6 MiB/s done Bytes transferred = 6368088 (612b58 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x612b58 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc2-next-20171205-218604-g7ceb97a (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Dec 6 08:33:08 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2824K rodata, 1024K init, 298K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 779 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008020] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017552] Switching to timer-based delay loop, resolution 1000ns [ 0.024072] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029773] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040520] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048491] Switching to timer-based delay loop, resolution 83ns [ 0.054671] Console: colour dummy device 80x30 [ 0.058900] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073974] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080391] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087728] CPU: Testing write buffer coherency: ok [ 0.092402] /cpus/cpu@0 missing clock-frequency property [ 0.097555] /cpus/cpu@1 missing clock-frequency property [ 0.102850] /cpus/cpu@2 missing clock-frequency property [ 0.108128] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153454] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158110] Hierarchical SRCU implementation. [ 0.173660] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193457] smp: Bringing up secondary CPUs ... [ 0.243702] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323733] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403773] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413602] smp: Brought up 1 node, 4 CPUs [ 0.432679] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438838] CPU: All CPU(s) started in SVC mode. [ 0.444128] devtmpfs: initialized [ 0.453030] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.458927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.468565] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.475249] pinctrl core: initialized pinctrl subsystem [ 0.480387] NET: Registered protocol family 16 [ 0.484883] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.491635] cpuidle: using governor menu [ 0.502671] No ATAGs? [ 0.502730] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.511071] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.517753] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.525416] iommu: Adding device reg-dummy to group 0 [ 0.530327] iommu: Adding device 50000000.host1x to group 1 [ 0.535879] iommu: Adding device 54200000.dc to group 2 [ 0.541069] iommu: Adding device 54240000.dc to group 3 [ 0.546264] iommu: Adding device 54280000.hdmi to group 4 [ 0.551633] iommu: Adding device 54540000.sor to group 5 [ 0.556923] iommu: Adding device 545c0000.dpaux to group 6 [ 0.562394] iommu: Adding device 57000000.gpu to group 7 [ 0.567670] iommu: Adding device 60005000.timer to group 8 [ 0.573123] iommu: Adding device 60007000.flow-controller to group 9 [ 0.579456] iommu: Adding device 6000c800.actmon to group 10 [ 0.585084] iommu: Adding device 6000d000.gpio to group 11 [ 0.590551] iommu: Adding device 60020000.dma to group 12 [ 0.595916] iommu: Adding device 70000800.apbmisc to group 13 [ 0.601642] iommu: Adding device 70000868.pinmux to group 14 [ 0.607270] iommu: Adding device 70006000.serial to group 15 [ 0.612908] iommu: Adding device 7000a000.pwm to group 16 [ 0.618279] iommu: Adding device 7000c000.i2c to group 17 [ 0.623655] iommu: Adding device 7000c400.i2c to group 18 [ 0.629026] iommu: Adding device 7000c500.i2c to group 19 [ 0.634403] iommu: Adding device 7000c700.i2c to group 20 [ 0.639769] iommu: Adding device 7000d000.i2c to group 21 [ 0.645153] iommu: Adding device 7000d400.spi to group 22 [ 0.650516] iommu: Adding device 7000da00.spi to group 23 [ 0.655896] iommu: Adding device 7000e000.rtc to group 24 [ 0.661263] iommu: Adding device 7000e400.pmc to group 25 [ 0.666644] iommu: Adding device 7000f800.fuse to group 26 [ 0.672096] iommu: Adding device 70019000.memory-controller to group 27 [ 0.678693] iommu: Adding device 7001b000.emc to group 28 [ 0.684056] iommu: Adding device 70030000.hda to group 29 [ 0.689436] iommu: Adding device 70090000.usb to group 30 [ 0.694805] iommu: Adding device 7009f000.padctl to group 31 [ 0.700442] iommu: Adding device 700b0000.sdhci to group 32 [ 0.705984] iommu: Adding device 700b0400.sdhci to group 33 [ 0.711542] iommu: Adding device 700b0600.sdhci to group 34 [ 0.717076] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.723409] iommu: Adding device 70300000.ahub to group 36 [ 0.728865] iommu: Adding device pmu to group 37 [ 0.733468] iommu: Adding device timer to group 38 [ 0.738223] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.743690] iommu: Adding device backlight to group 40 [ 0.748799] iommu: Adding device clocks to group 41 [ 0.753649] iommu: Adding device gpio-keys to group 42 [ 0.758768] iommu: Adding device regulators to group 43 [ 0.763963] iommu: Adding device regulators:regulator@0 to group 44 [ 0.770208] iommu: Adding device regulators:regulator@1 to group 45 [ 0.776443] iommu: Adding device regulators:regulator@2 to group 46 [ 0.782689] iommu: Adding device regulators:regulator@3 to group 47 [ 0.788925] iommu: Adding device regulators:regulator@4 to group 48 [ 0.795173] iommu: Adding device regulators:regulator@5 to group 49 [ 0.801403] iommu: Adding device regulators:regulator@6 to group 50 [ 0.807649] iommu: Adding device regulators:regulator@7 to group 51 [ 0.813883] iommu: Adding device regulators:regulator@8 to group 52 [ 0.820131] iommu: Adding device regulators:regulator@9 to group 53 [ 0.826363] iommu: Adding device regulators:regulator@10 to group 54 [ 0.832697] iommu: Adding device regulators:regulator@11 to group 55 [ 0.839017] iommu: Adding device regulators:regulator@12 to group 56 [ 0.845351] iommu: Adding device sound to group 57 [ 0.850110] iommu: Adding device gpio-restart to group 58 [ 0.855488] iommu: Adding device panel to group 59 [ 0.866006] +5V_SYS: supplied by +VDD_MUX [ 0.868233] +3.3V_SYS: supplied by +VDD_MUX [ 0.872534] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.877902] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.885986] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.891949] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.900026] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.905807] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.913892] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.919672] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.927819] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.934666] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.942838] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.948704] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.957278] vgaarb: loaded [ 0.959803] SCSI subsystem initialized [ 0.963345] libata version 3.00 loaded. [ 0.967188] usbcore: registered new interface driver usbfs [ 0.972561] usbcore: registered new interface driver hub [ 0.977854] usbcore: registered new device driver usb [ 0.984090] Linux video capture interface: v2.00 [ 0.987462] pps_core: LinuxPPS API ver. 1 registered [ 0.992376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.001497] PTP clock support registered [ 1.005522] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 1.012757] tegra-emc: probe of 7001b000.emc failed with error -2 [ 1.018914] Advanced Linux Sound Architecture Driver Initialized. [ 1.025133] Bluetooth: Core ver 2.22 [ 1.028450] NET: Registered protocol family 31 [ 1.032850] Bluetooth: HCI device and connection manager initialized [ 1.039187] Bluetooth: HCI socket layer initialized [ 1.044032] Bluetooth: L2CAP socket layer initialized [ 1.049073] Bluetooth: SCO socket layer initialized [ 1.054169] clocksource: Switched to clocksource arch_sys_counter [ 1.091098] NET: Registered protocol family 2 [ 1.093915] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.101210] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.108224] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.114664] TCP: Hash tables configured (established 8192 bind 8192) [ 1.121102] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.126841] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.133266] NET: Registered protocol family 1 [ 1.147759] RPC: Registered named UNIX socket transport module. [ 1.151756] RPC: Registered udp transport module. [ 1.156458] RPC: Registered tcp transport module. [ 1.161116] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.167707] iommu: Adding device regulatory.0 to group 60 [ 1.182995] PCI: CLS 0 bytes, default 64 [ 1.185698] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.193406] iommu: Adding device alarmtimer to group 61 [ 1.198759] Initialise system trusted keyrings [ 1.202843] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.209684] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.215280] NFS: Registering the id_resolver key type [ 1.220017] Key type id_resolver registered [ 1.224182] Key type id_legacy registered [ 1.229838] Key type asymmetric registered [ 1.232232] Asymmetric key parser 'x509' registered [ 1.237151] bounce: pool size: 64 pages [ 1.240925] io scheduler noop registered (default) [ 1.245674] io scheduler mq-deadline registered [ 1.250171] io scheduler kyber registered [ 1.254803] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.267225] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.273294] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 1.282139] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.288265] iommu: Adding device serial8250 to group 62 [ 1.294058] console [ttyS0] disabled [ 1.296991] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.305916] console [ttyS0] enabled [ 1.305916] console [ttyS0] enabled [ 1.312134] bootconsole [earlycon0] disabled [ 1.312134] bootconsole [earlycon0] disabled [ 1.338191] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.344737] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.352195] panel-simple panel: panel supply power not found, using dummy regulator [ 1.363502] loop: module loaded [ 1.367221] as3722 4-0040: AS3722 with revision 0x1 found [ 1.373823] iommu: Adding device as3722-pinctrl to group 63 [ 1.380764] iommu: Adding device as3722-regulator to group 64 [ 1.388600] as3722-sd2: supplied by +5V_SYS [ 1.393023] as3722-sd3: supplied by +5V_SYS [ 1.397376] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.403555] as3722-sd4: supplied by +5V_SYS [ 1.407902] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.413646] as3722-sd5: supplied by +5V_SYS [ 1.419264] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.425015] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.431031] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.436674] as3722-ldo3: supplied by +3.3V_SYS [ 1.441126] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.448707] as3722-ldo4: supplied by +3.3V_SYS [ 1.453306] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.459333] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.464108] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.470814] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.476851] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.481625] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.488182] as3722-ldo9: supplied by +5V_SYS [ 1.492753] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.498964] as3722-ldo10: supplied by +5V_SYS [ 1.503479] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.509930] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.516455] iommu: Adding device as3722-rtc to group 65 [ 1.521725] iommu: Adding device as3722-adc to group 66 [ 1.526997] iommu: Adding device as3722-power-off to group 67 [ 1.532784] iommu: Adding device as3722-wdt to group 68 [ 1.550826] iommu: Adding device cros-ec-ctl.0.auto to group 69 [ 1.556817] iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70 [ 1.564136] iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71 [ 1.575039] cros-ec-spi spi0.0: Chrome EC device registered [ 1.590014] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.595465] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.601263] libphy: Fixed MDIO Bus: probed [ 1.605363] CAN device driver interface [ 1.609208] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.616158] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.621762] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.629176] usbcore: registered new interface driver pegasus [ 1.634860] usbcore: registered new interface driver asix [ 1.640260] usbcore: registered new interface driver ax88179_178a [ 1.646364] usbcore: registered new interface driver cdc_ether [ 1.652203] usbcore: registered new interface driver smsc75xx [ 1.657963] usbcore: registered new interface driver smsc95xx [ 1.663712] usbcore: registered new interface driver net1080 [ 1.669382] usbcore: registered new interface driver cdc_subset [ 1.675311] usbcore: registered new interface driver zaurus [ 1.680892] usbcore: registered new interface driver cdc_ncm [ 1.686635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.693145] ehci-pci: EHCI PCI platform driver [ 1.697602] tegra-ehci: Tegra EHCI driver [ 1.701870] usbcore: registered new interface driver cdc_acm [ 1.707521] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.715530] usbcore: registered new interface driver cdc_wdm [ 1.721196] usbcore: registered new interface driver usb-storage [ 1.727855] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.747536] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.754402] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.761168] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.768313] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.774596] i2c /dev entries driver [ 1.778499] usbcore: registered new interface driver uvcvideo [ 1.784239] USB Video Class driver (1.1.1) [ 1.788322] gspca_main: v2.14.0 registered [ 1.792635] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.801301] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.809333] iommu: Adding device cpufreq-tegra124 to group 73 [ 1.815390] sdhci: Secure Digital Host Controller Interface driver [ 1.821555] sdhci: Copyright(c) Pierre Ossman [ 1.825908] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.831676] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.844293] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.849163] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.868201] mmc0: Unknown controller version (3). You may experience problems. [ 1.875440] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.912206] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.919921] usbcore: registered new interface driver usbhid [ 1.925602] usbhid: USB HID core driver [ 1.930292] iommu: Adding device snd-soc-dummy to group 74 [ 1.936928] iommu: Adding device 70301100.i2s to group 75 [ 1.942864] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.984664] max98090 0-0010: MAX98090 REVID=0x43 [ 1.991198] max98090 0-0010: use default 2.8v micbias [ 1.998789] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 2.005346] mmc0: new high speed MMC card at address 0001 [ 2.012549] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.019773] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.026021] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 2.027596] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.027715] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 2.030922] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.052729] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 2.060976] NET: Registered protocol family 10 [ 2.065924] Segment Routing with IPv6 [ 2.069638] mip6: Mobile IPv6 [ 2.072596] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.079059] NET: Registered protocol family 17 [ 2.083498] NET: Registered protocol family 15 [ 2.087937] can: controller area network core (rev 20170425 abi 9) [ 2.094185] NET: Registered protocol family 29 [ 2.098616] can: raw protocol (rev 20170425) [ 2.102872] can: broadcast manager protocol (rev 20170425 t) [ 2.108528] can: netlink gateway (rev 20170425) max_hops=1 [ 2.114070] Bluetooth: RFCOMM socket layer initialized [ 2.119215] Bluetooth: RFCOMM ver 1.11 [ 2.122957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.128274] Bluetooth: BNEP socket layer initialized [ 2.133225] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.139137] Bluetooth: HIDP socket layer initialized [ 2.144189] Key type dns_resolver registered [ 2.148636] Registering SWP/SWPB emulation handler [ 2.153697] Loading compiled-in X.509 certificates [ 2.165186] +3.3V_RUN: supplied by +3.3V_SYS [ 2.170086] +VDD_LED: supplied by +VDD_MUX [ 2.174349] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.180013] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.184752] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.189396] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.194701] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.199483] +5V_USB_HS: supplied by +5V_SYS [ 2.204000] +5V_USB_SS: supplied by +5V_SYS [ 2.209332] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.214744] +3.3V_LP0: supplied by +3.3V_SYS [ 2.219698] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.225647] +5V_HDMI_CON: supplied by +5V_SYS [ 2.230602] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.237421] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.246646] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.252803] panel-simple panel: panel supply power not found, using dummy regulator [ 2.324932] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 2.332329] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.337748] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 2.347314] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 2.355968] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 2.362589] hub 1-0:1.0: USB hub found [ 2.366410] hub 1-0:1.0: 6 ports detected [ 2.370782] tegra-xusb 70090000.usb: xHCI Host Controller [ 2.376212] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 2.383895] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.392568] hub 2-0:1.0: USB hub found [ 2.396382] hub 2-0:1.0: 2 ports detected [ 2.401431] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.414453] mmc1: Unknown controller version (3). You may experience problems. [ 2.421711] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.428181] mmc1: Switching to 3.3V signalling voltage failed [ 2.456930] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.464579] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.469453] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.479708] mmc2: Unknown controller version (3). You may experience problems. [ 2.487044] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.523440] mmc1: new high speed SDIO card at address 0001 [ 2.529244] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.536793] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.542947] panel-simple panel: panel supply power not found, using dummy regulator [ 2.551013] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.557959] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.564227] panel-simple panel: panel supply power not found, using dummy regulator [ 2.571890] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.580770] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.590664] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.597416] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.604567] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.604579] +1.8V_RUN_CAM: disabling [ 2.606164] +1.2V_RUN_CAM_FRONT: disabling [ 2.610849] +1.05V_RUN_CAM_REAR: disabling [ 2.614600] +2.8V_RUN_TOUCH: disabling [ 2.618693] +2.8V_RUN_CAM_AF: disabling [ 2.622834] +1.8V_RUN_VPP_FUSE: disabling [ 2.626589] +VDD_LED: disabling [ 2.626593] +5V_VDD_TS_SW: disabling [ 2.626601] +3.3V_PANEL: disabling [ 2.626605] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.626608] +5V_HDMI_CON: disabling [ 2.626612] ALSA device list: [ 2.626615] #1: GoogleNyanBig [ 2.659111] cfg80211: failed to load regulatory.db [ 2.684720] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.693205] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.693416] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.693781] panel-simple panel: panel supply power not found, using dummy regulator [ 2.744288] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.762246] mmc2: new high speed SDHC card at address 0007 [ 2.769612] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.793586] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.799790] GPT:3014591 != 15564799 [ 2.803268] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.810680] GPT:3014591 != 15564799 [ 2.814194] GPT: Use GNU Parted to correct GPT errors. [ 2.819354] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.828309] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.834585] panel-simple panel: panel supply power not found, using dummy regulator [ 3.067293] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 3.082271] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 3.091971] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.098159] panel-simple panel: panel supply power not found, using dummy regulator [ 3.134848] EXT4-fs (mmcblk0p3): recovery complete [ 3.139636] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.147775] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 3.154783] devtmpfs: mounted [ 3.158196] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.434262] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys root@(none):/# root@(none):/# [ 4.094545] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 4.105543] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.111699] panel-simple panel: panel supply power not found, using dummy regulator [ 4.454281] usb 1-1: new high-speed USB device number 4 using tegra-xusb mount -t debugfs none /sys/kernel/debug [ 4.642677] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.650071] scsi host0: usb-storage 1-1:1.0 [ 4.654817] tegra-sor 54540000.sor: failed to probe output: -517 root@(none):/# [ 4.661146] panel-simple panel: panel supply power not found, using dummy regulator root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.646629] PM: suspend entry (deep) [ 5.650197] PM: Syncing filesystems ... done. [ 5.656129] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.664269] OOM killer disabled. [ 5.667491] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.676105] Suspending console(s) (use no_console_suspend to debug) [ 5.867327] Disabling non-boot CPUs ... [ 5.984345] IRQ17 no longer affine to CPU2 [ 6.045046] Entering suspend state LP1 [ 6.045072] Enabling non-boot CPUs ... [ 6.045773] CPU1 is up [ 6.046376] CPU2 is up [ 6.047017] CPU3 is up [ 6.087982] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.100310] mmc1: Switching to 3.3V signalling voltage failed [ 6.629290] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.629455] panel-simple panel: panel supply power not found, using dummy regulator [ 6.677027] OOM killer enabled. [ 6.680169] Restarting tasks ... done. [ 6.684770] PM: suspend exit [ 6.687844] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 root@(none):/# [ 6.696728] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.703873] panel-simple panel: panel supply power not found, using dummy regulator root@(none):/# [ 6.891300] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 6.899945] sd 0:0:0:0: [sda] Write Protect is off [ 6.904764] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 6.910986] sd 0:0:0:0: [sda] No Caching mode page found [ 6.916327] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 6.943490] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 6.954986] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.513987] PM: suspend entry (deep) [ 7.517576] PM: Syncing filesystems ... done. [ 7.523273] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.531353] OOM killer disabled. [ 7.534584] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.543143] Suspending console(s) (use no_console_suspend to debug) [ 7.727895] Disabling non-boot CPUs ... [ 7.884813] Entering suspend state LP1 [ 7.884839] Enabling non-boot CPUs ... [ 7.885580] CPU1 is up [ 7.886181] CPU2 is up [ 7.886834] CPU3 is up [ 7.928073] cros-ec-spi spi0.0: spi transfer failed: -121 [ 7.940449] mmc1: Switching to 3.3V signalling voltage failed [ 8.154624] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 8.469819] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.469985] panel-simple panel: panel supply power not found, using dummy regulator [ 8.520321] OOM killer enabled. [ 8.523463] Restarting tasks ... done. [ 8.527961] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 9.352904] PM: suspend entry (deep) [ 9.356492] PM: Syncing filesystems ... done. [ 9.362033] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.370208] OOM killer disabled. [ 9.373424] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.382003] Suspending console(s) (use no_console_suspend to debug) [ 9.567806] Disabling non-boot CPUs ... [ 9.664298] IRQ17 no longer affine to CPU2 [ 9.724770] Entering suspend state LP1 [ 9.724796] Enabling non-boot CPUs ... [ 9.725541] CPU1 is up [ 9.726158] CPU2 is up [ 9.726816] CPU3 is up [ 9.768054] cros-ec-spi spi0.0: spi transfer failed: -121 [ 9.780328] mmc1: Switching to 3.3V signalling voltage failed [ 10.310168] tegra-sor 54540000.sor: failed to probe output: -517 [ 10.310334] panel-simple panel: panel supply power not found, using dummy regulator [ 10.357793] OOM killer enabled. [ 10.360922] Restarting tasks ... done. [ 10.365650] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 11.193838] PM: suspend entry (deep) [ 11.197494] PM: Syncing filesystems ... done. [ 11.203007] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.211089] OOM killer disabled. [ 11.214322] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.222808] Suspending console(s) (use no_console_suspend to debug) [ 11.407787] Disabling non-boot CPUs ... [ 11.494273] IRQ17 no longer affine to CPU2 [ 11.554807] Entering suspend state LP1 [ 11.554833] Enabling non-boot CPUs ... [ 11.555576] CPU1 is up [ 11.556193] CPU2 is up [ 11.556853] CPU3 is up [ 11.597942] cros-ec-spi spi0.0: spi transfer failed: -121 [ 11.610290] mmc1: Switching to 3.3V signalling voltage failed [ 11.824595] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 12.137568] tegra-sor 54540000.sor: failed to probe output: -517 [ 12.137731] panel-simple panel: panel supply power not found, using dummy regulator [ 12.192181] OOM killer enabled. [ 12.195344] Restarting tasks ... done. [ 12.199569] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 13.023807] PM: suspend entry (deep) [ 13.027397] PM: Syncing filesystems ... done. [ 13.033100] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.041266] OOM killer disabled. [ 13.044502] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.053079] Suspending console(s) (use no_console_suspend to debug) [ 13.237476] Disabling non-boot CPUs ... [ 13.394728] Entering suspend state LP1 [ 13.394753] Enabling non-boot CPUs ... [ 13.395498] CPU1 is up [ 13.396098] CPU2 is up [ 13.396765] CPU3 is up [ 13.438153] cros-ec-spi spi0.0: spi transfer failed: -121 [ 13.450606] mmc1: Switching to 3.3V signalling voltage failed [ 13.664570] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 13.979153] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.979317] panel-simple panel: panel supply power not found, using dummy regulator [ 14.029654] OOM killer enabled. [ 14.032797] Restarting tasks ... done. [ 14.037106] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 14.863864] PM: suspend entry (deep) [ 14.867454] PM: Syncing filesystems ... done. [ 14.873083] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.881166] OOM killer disabled. [ 14.884396] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.892960] Suspending console(s) (use no_console_suspend to debug) [ 15.077502] Disabling non-boot CPUs ... [ 15.234692] Entering suspend state LP1 [ 15.234718] Enabling non-boot CPUs ... [ 15.235462] CPU1 is up [ 15.236063] CPU2 is up [ 15.236727] CPU3 is up [ 15.278067] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.290542] mmc1: Switching to 3.3V signalling voltage failed [ 15.504541] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 15.820163] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.820326] panel-simple panel: panel supply power not found, using dummy regulator [ 15.870671] OOM killer enabled. [ 15.873812] Restarting tasks ... done. [ 15.878178] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 16.703716] PM: suspend entry (deep) [ 16.707307] PM: Syncing filesystems ... done. [ 16.712995] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.721076] OOM killer disabled. [ 16.724309] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.732871] Suspending console(s) (use no_console_suspend to debug) [ 16.917531] Disabling non-boot CPUs ... [ 17.094173] IRQ17 no longer affine to CPU3 [ 17.094750] Entering suspend state LP1 [ 17.094775] Enabling non-boot CPUs ... [ 17.095521] CPU1 is up [ 17.096135] CPU2 is up [ 17.096806] CPU3 is up [ 17.138040] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.150223] mmc1: Switching to 3.3V signalling voltage failed [ 17.364522] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.680145] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.680310] panel-simple panel: panel supply power not found, using dummy regulator [ 17.734772] OOM killer enabled. [ 17.737906] Restarting tasks ... done. [ 17.742118] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 18.562838] PM: suspend entry (deep) [ 18.566427] PM: Syncing filesystems ... done. [ 18.571959] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.580045] OOM killer disabled. [ 18.583261] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.591824] Suspending console(s) (use no_console_suspend to debug) [ 18.777584] Disabling non-boot CPUs ... [ 18.944656] Entering suspend state LP1 [ 18.944681] Enabling non-boot CPUs ... [ 18.945426] CPU1 is up [ 18.946038] CPU2 is up [ 18.946701] CPU3 is up [ 18.987896] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.000244] mmc1: Switching to 3.3V signalling voltage failed [ 19.214498] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 19.529958] tegra-sor 54540000.sor: failed to probe output: -517 [ 19.530126] panel-simple panel: panel supply power not found, using dummy regulator [ 19.580462] OOM killer enabled. [ 19.583602] Restarting tasks ... done. [ 19.587840] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 20.413815] PM: suspend entry (deep) [ 20.417414] PM: Syncing filesystems ... done. [ 20.423081] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.431163] OOM killer disabled. [ 20.434394] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.442955] Suspending console(s) (use no_console_suspend to debug) [ 20.627774] Disabling non-boot CPUs ... [ 20.804625] Entering suspend state LP1 [ 20.804651] Enabling non-boot CPUs ... [ 20.805396] CPU1 is up [ 20.805995] CPU2 is up [ 20.806658] CPU3 is up [ 20.848057] cros-ec-spi spi0.0: spi transfer failed: -121 [ 20.860211] mmc1: Switching to 3.3V signalling voltage failed [ 21.074434] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 21.389157] tegra-sor 54540000.sor: failed to probe output: -517 [ 21.389321] panel-simple panel: panel supply power not found, using dummy regulator [ 21.439661] OOM killer enabled. [ 21.442802] Restarting tasks ... done. [ 21.447154] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 22.272831] PM: suspend entry (deep) [ 22.276420] PM: Syncing filesystems ... done. [ 22.281961] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.290050] OOM killer disabled. [ 22.293265] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.301831] Suspending console(s) (use no_console_suspend to debug) [ 22.487651] Disabling non-boot CPUs ... [ 22.654599] Entering suspend state LP1 [ 22.654625] Enabling non-boot CPUs ... [ 22.655370] CPU1 is up [ 22.655985] CPU2 is up [ 22.656651] CPU3 is up [ 22.697851] cros-ec-spi spi0.0: spi transfer failed: -121 [ 22.710235] mmc1: Switching to 3.3V signalling voltage failed [ 22.924443] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 23.239092] tegra-sor 54540000.sor: failed to probe output: -517 [ 23.239258] panel-simple panel: panel supply power not found, using dummy regulator [ 23.289681] OOM killer enabled. [ 23.292815] Restarting tasks ... done. [ 23.297042] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE