U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.9 MiB/s done Bytes transferred = 8081920 (7b5200 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.7 MiB/s done Bytes transferred = 51470 (c90e hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7b5200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffff90d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc1-next-20171129-335140-gd127129e85a0 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 28 19:18:17 PST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef8c000 s39232 r8192 d22208 u69632 [ 0.000000] pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1992476K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e00000 (12256 kB) [ 0.000000] .init : 0xc1300000 - 0xc1500000 (2048 kB) [ 0.000000] .data : 0xc1500000 - 0xc1690af0 (1603 kB) [ 0.000000] .bss : 0xc1690af0 - 0xc16f5d64 ( 405 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000040] Switching to timer-based delay loop, resolution 1000ns [ 0.003079] Console: colour dummy device 80x30 [ 0.003110] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.003120] pid_max: default: 32768 minimum: 301 [ 0.003211] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003220] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003622] CPU: Testing write buffer coherency: ok [ 0.003943] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004167] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005525] Hierarchical SRCU implementation. [ 0.006892] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007471] EFI services will not be available. [ 0.007576] smp: Bringing up secondary CPUs ... [ 0.010371] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020349] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030329] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030387] smp: Brought up 1 node, 4 CPUs [ 0.030401] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030405] CPU: All CPU(s) started in SVC mode. [ 0.031138] devtmpfs: initialized [ 0.038069] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.038494] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038514] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041967] pinctrl core: initialized pinctrl subsystem [ 0.043384] DMI not present or invalid. [ 0.043648] NET: Registered protocol family 16 [ 0.046677] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048401] cpuidle: using governor menu [ 0.061898] No ATAGs? [ 0.062007] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.062021] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066334] Serial: AMBA PL011 UART driver [ 0.066939] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.067034] iommu: Adding device reg-dummy to group 0 [ 0.067066] iommu: Adding device 3000.pcie to group 1 [ 0.067086] iommu: Adding device 50000000.host1x to group 2 [ 0.067105] iommu: Adding device 54040000.mpe to group 3 [ 0.067129] iommu: Adding device 54080000.vi to group 4 [ 0.067146] iommu: Adding device 540c0000.epp to group 5 [ 0.067164] iommu: Adding device 54100000.isp to group 6 [ 0.067182] iommu: Adding device 54140000.gr2d to group 7 [ 0.067200] iommu: Adding device 54180000.gr3d to group 8 [ 0.067268] iommu: Adding device 54200000.dc to group 9 [ 0.067308] iommu: Adding device 54240000.dc to group 10 [ 0.067332] iommu: Adding device 54280000.hdmi to group 11 [ 0.067357] iommu: Adding device 50040600.timer to group 12 [ 0.067376] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067393] iommu: Adding device 60005000.timer to group 14 [ 0.067410] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067428] iommu: Adding device 6000a000.dma to group 16 [ 0.067444] iommu: Adding device 6000c000.ahb to group 17 [ 0.067462] iommu: Adding device 6000d000.gpio to group 18 [ 0.067479] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067502] iommu: Adding device 70000868.pinmux to group 20 [ 0.067521] iommu: Adding device 70006000.serial to group 21 [ 0.067546] iommu: Adding device 7000e000.rtc to group 22 [ 0.067565] iommu: Adding device 7000c000.i2c to group 23 [ 0.067582] iommu: Adding device 7000c400.i2c to group 24 [ 0.067600] iommu: Adding device 7000c500.i2c to group 25 [ 0.067622] iommu: Adding device 7000c700.i2c to group 26 [ 0.067640] iommu: Adding device 7000d000.i2c to group 27 [ 0.067664] iommu: Adding device 7000da00.spi to group 28 [ 0.067682] iommu: Adding device 7000e400.pmc to group 29 [ 0.067699] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067717] iommu: Adding device 7000f800.fuse to group 31 [ 0.067735] iommu: Adding device 70080000.ahub to group 32 [ 0.067760] iommu: Adding device 78000000.sdhci to group 33 [ 0.067779] iommu: Adding device 78000600.sdhci to group 34 [ 0.067797] iommu: Adding device 7d000000.usb to group 35 [ 0.067815] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067837] iommu: Adding device 7d004000.usb to group 37 [ 0.067856] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067874] iommu: Adding device 7d008000.usb to group 39 [ 0.067893] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067909] iommu: Adding device pmu to group 41 [ 0.067925] iommu: Adding device clocks to group 42 [ 0.067943] iommu: Adding device gpio-leds to group 43 [ 0.067966] iommu: Adding device regulators to group 44 [ 0.067989] iommu: Adding device regulators:regulator@0 to group 45 [ 0.068027] iommu: Adding device regulators:regulator@1 to group 46 [ 0.068046] iommu: Adding device regulators:regulator@2 to group 47 [ 0.068063] iommu: Adding device regulators:regulator@3 to group 48 [ 0.068081] iommu: Adding device regulators:regulator@4 to group 49 [ 0.068099] iommu: Adding device regulators:regulator@5 to group 50 [ 0.068116] iommu: Adding device regulators:regulator@6 to group 51 [ 0.068134] iommu: Adding device regulators:regulator@7 to group 52 [ 0.068157] iommu: Adding device regulators:regulator@8 to group 53 [ 0.068181] iommu: Adding device sound to group 54 [ 0.076703] AT91: Could not find identification node [ 0.077204] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.077219] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.077269] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.077276] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.077325] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.077332] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077433] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077440] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.079297] vgaarb: loaded [ 0.079785] SCSI subsystem initialized [ 0.079988] libata version 3.00 loaded. [ 0.080132] usbcore: registered new interface driver usbfs [ 0.080160] usbcore: registered new interface driver hub [ 0.080195] usbcore: registered new device driver usb [ 0.084575] iommu: Adding device tps65910-gpio to group 55 [ 0.084865] iommu: Adding device tps65910-pmic to group 56 [ 0.087340] vrtc: supplied by vdd_5v_in [ 0.090625] vio: supplied by vdd_5v_in [ 0.101808] vdd1: supplied by vdd_5v_in [ 0.103167] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111815] vdd2: supplied by vdd_5v_in [ 0.131805] ldo1: supplied by vdd_1v5_gen [ 0.134169] ldo2: supplied by vdd_1v5_gen [ 0.134642] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136865] ldo3: supplied by vdd_5v_in [ 0.139205] ldo4: supplied by vdd_5v_in [ 0.141815] ldo5: supplied by vdd_5v_in [ 0.151798] ldo6: supplied by vdd_1v8_gen [ 0.152269] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154507] ldo7: supplied by vdd_1v8_gen [ 0.161802] ldo8: supplied by vdd_1v8_gen [ 0.170077] iommu: Adding device tps65910-rtc to group 57 [ 0.170206] iommu: Adding device tps65910-power to group 58 [ 0.171969] pps_core: LinuxPPS API ver. 1 registered [ 0.171975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.171987] PTP clock support registered [ 0.172125] EDAC MC: Ver: 3.0.0 [ 0.173675] clocksource: Switched to clocksource timer_us [ 0.203723] NET: Registered protocol family 2 [ 0.204123] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.204179] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.204264] TCP: Hash tables configured (established 8192 bind 8192) [ 0.204426] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.204491] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.204665] NET: Registered protocol family 1 [ 0.205012] RPC: Registered named UNIX socket transport module. [ 0.205020] RPC: Registered udp transport module. [ 0.205024] RPC: Registered tcp transport module. [ 0.205028] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.205039] PCI: CLS 0 bytes, default 64 [ 0.205878] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.206124] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.206634] iommu: Adding device alarmtimer to group 59 [ 0.207222] Initialise system trusted keyrings [ 0.207343] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.211096] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.211499] NFS: Registering the id_resolver key type [ 0.211520] Key type id_resolver registered [ 0.211525] Key type id_legacy registered [ 0.211555] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.212560] Key type asymmetric registered [ 0.212569] Asymmetric key parser 'x509' registered [ 0.212602] bounce: pool size: 64 pages [ 0.212651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.212660] io scheduler noop registered [ 0.212665] io scheduler deadline registered [ 0.212797] io scheduler cfq registered (default) [ 0.212804] io scheduler mq-deadline registered [ 0.212809] io scheduler kyber registered [ 0.219488] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.219512] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.219527] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.219537] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.219984] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.220027] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.220350] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.220362] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.220374] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.220415] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.220445] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.220474] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.220521] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.221004] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.221117] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.226522] tegra-pcie 3000.pcie: 2x3 configuration [ 0.226692] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.232443] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.234660] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.264578] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.264670] iommu: Adding device serial8250 to group 60 [ 0.266697] console [ttyS0] disabled [ 0.266737] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.637119] console [ttyS0] enabled [ 1.641137] SuperH (H)SCI(F) driver initialized [ 1.646315] msm_serial: driver initialized [ 1.650509] STMicroelectronics ASC driver initialized [ 1.675520] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.688697] brd: module loaded [ 1.697391] loop: module loaded [ 1.706474] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.712279] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.718463] libphy: Fixed MDIO Bus: probed [ 1.723122] CAN device driver interface [ 1.727610] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.734040] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.739858] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.745808] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.752750] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.760503] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.767947] usbcore: registered new interface driver pegasus [ 1.773621] usbcore: registered new interface driver asix [ 1.779035] usbcore: registered new interface driver ax88179_178a [ 1.785140] usbcore: registered new interface driver cdc_ether [ 1.790984] usbcore: registered new interface driver smsc75xx [ 1.796748] usbcore: registered new interface driver smsc95xx [ 1.802493] usbcore: registered new interface driver net1080 [ 1.808165] usbcore: registered new interface driver cdc_subset [ 1.814094] usbcore: registered new interface driver zaurus [ 1.819682] usbcore: registered new interface driver cdc_ncm [ 1.825535] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.833343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.839869] ehci-pci: EHCI PCI platform driver [ 1.844334] ehci-platform: EHCI generic platform driver [ 1.849671] ehci-orion: EHCI orion driver [ 1.853770] SPEAr-ehci: EHCI SPEAr driver [ 1.857843] ehci-st: EHCI STMicroelectronics driver [ 1.862781] ehci-exynos: EHCI EXYNOS driver [ 1.867054] ehci-atmel: EHCI Atmel driver [ 1.871125] tegra-ehci: Tegra EHCI driver [ 1.875440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.881616] ohci-pci: OHCI PCI platform driver [ 1.886088] ohci-platform: OHCI generic platform driver [ 1.891416] SPEAr-ohci: OHCI SPEAr driver [ 1.895506] ohci-st: OHCI STMicroelectronics driver [ 1.900446] ohci-atmel: OHCI Atmel driver [ 1.904911] usbcore: registered new interface driver usb-storage [ 1.914461] iommu: Adding device ci_hdrc.0 to group 62 [ 1.925205] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.932353] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.951133] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.958737] i2c /dev entries driver [ 1.970564] sdhci: Secure Digital Host Controller Interface driver [ 1.976757] sdhci: Copyright(c) Pierre Ossman [ 1.982103] Synopsys Designware Multimedia Card Interface Driver [ 1.988954] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.995164] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 2.000038] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.013198] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.051183] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.063623] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.095888] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.104838] ledtrig-cpu: registered to indicate activity on CPUs [ 2.111116] usbcore: registered new interface driver usbhid [ 2.116685] usbhid: USB HID core driver [ 2.123110] NET: Registered protocol family 10 [ 2.128256] Segment Routing with IPv6 [ 2.131956] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.138262] NET: Registered protocol family 17 [ 2.142700] can: controller area network core (rev 20170425 abi 9) [ 2.148926] NET: Registered protocol family 29 [ 2.153358] can: raw protocol (rev 20170425) [ 2.157625] can: broadcast manager protocol (rev 20170425 t) [ 2.163271] can: netlink gateway (rev 20170425) max_hops=1 [ 2.169054] Key type dns_resolver registered [ 2.173731] ThumbEE CPU extension supported. [ 2.175099] mmc1: new high speed MMC card at address 0001 [ 2.175430] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.175537] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.175633] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.180350] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (237:0) [ 2.183591] Primary GPT is invalid, using alternate GPT. [ 2.183608] mmcblk1: p1 p2 p3 p4 p5 [ 2.211341] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.211993] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.226767] Registering SWP/SWPB emulation handler [ 2.231893] Loading compiled-in X.509 certificates [ 2.244133] mmcblk0: p1 p2 p3 [ 2.249711] vdd_ddr: supplied by vdd_5v_in [ 2.254668] vdd_5v_sata: supplied by vdd_5v_in [ 2.259419] usb1_vbus: supplied by vdd_5v_in [ 2.264034] usb3_vbus: supplied by vdd_5v_in [ 2.269531] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.275477] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.280970] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.287063] tegra-pcie 3000.pcie: 2x3 configuration [ 2.295118] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.359327] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.769214] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.178421] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.587598] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.594823] tegra-pcie 3000.pcie: link 2 down, ignoring [ 3.600136] tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00 [ 3.606154] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.612319] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.619188] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.626489] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.631984] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.637999] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.647642] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.657295] pci 0000:00:01.0: enabling Extended Tags [ 3.662248] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.671996] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.681742] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.688352] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.698218] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.707953] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.717595] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.727234] PCI: bus0: Fast back to back transfers disabled [ 3.732794] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.740789] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.750517] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.760324] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.766346] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.771919] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.779143] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.786458] PCI: bus1: Fast back to back transfers disabled [ 3.792019] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.798654] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.806392] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.812473] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.820216] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.827959] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.834050] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.839001] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.845090] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.852834] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.859879] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.866191] pcieport 0000:00:01.0: Signaling PME with IRQ 375 [ 3.872171] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.877767] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.883610] r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.892226] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a2a000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18 [ 3.902145] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.913644] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.920294] [drm] No driver support for vblank timestamp query. [ 3.926246] [drm] Cannot find any crtc or sizes [ 3.930781] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.940162] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.945607] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.953373] tegra-ehci 7d004000.usb: irq 344, io mem 0x7d004000 [ 3.959330] [drm] Cannot find any crtc or sizes [ 3.983683] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.990100] hub 1-0:1.0: USB hub found [ 3.993889] hub 1-0:1.0: 1 port detected [ 3.999081] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.004499] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.012236] tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000 [ 4.043688] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.050005] hub 2-0:1.0: USB hub found [ 4.053791] hub 2-0:1.0: 1 port detected [ 4.061867] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.071396] vdd_sata,avdd_plle: disabling [ 4.075776] usb1_vbus: disabling [ 4.080632] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 4.137186] EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended [ 4.147401] EXT4-fs (mmcblk1p1): recovery complete [ 4.153374] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.161498] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.177715] devtmpfs: mounted [ 4.183244] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.423703] usb 2-1: new high-speed USB device number 2 using tegra-ehci